Matthieu RAUCH
Professeur des universités
Fabrication Additive, CAD/CAM/CNC,
Génération de trajectoires de fabrication
UTR : RAPMAN
E-mail : matthieu.rauch
ec-nantes.fr
Publications
Type de publication
Année
MECHANICAL ANALYSIS OF THICK-WALLED LOW-CARBON STEEL STRUCTURES PRODUCED BY WIRE ARC ADDITIVE MANUFACTURING WITH ZIG-ZAG TRAJECTORIES, Abhishek Kumar Gupta, Ali Maden, Clea Plouze, Philippe Feraud, Catherine da Cunha, Matthieu Rauch, Helene Sapardanis, Journal of Machine Engineering, Vol. 26, issue 2, pp. 18-37 (2026), doi:10.36897/jme/221668
Evaluating and comparing the environmental performance of manufacturing processes considering design for additive manufacturing: a case study based on Wire Arc Additive Manufacturing and green sand casting, Antoine Balidas, Olivier Kerbrat, Matthieu Rauch, Procedia CIRP, Procedia CIRP, Vol. 140, pp. 575-580 (2026), doi:10.1016/j.procir.2026.05.097
Exploring the Limits of Low-Cost Metal FFF: Sintering and Porosity Effects in 316L Stainless Steel Parts, Tugdual Amaury Marie Le Néel, Mint Abat Ahmed El Hadi, Philippe Feraud, Matthieu Rauch, Journal of Manufacturing and Materials Processing, Vol. 10, number 319, issue 9 (2026), doi:10.3390/jmmp10090319
A Methodological Introduction to Digital Twins for Metal Additive Manufacturing: Challenges and Prospects, Shaoxuan Liang, Elodie Paquet, Matthieu Rauch, Mathieu Ritou, Conférence Manufacturing’21 (2026)
Methodology for complexity and cost comparison between subtractive and additive manufacturing processes, S. Touzé, M. Rauch, J. Y. Hascoët, Journal of Intelligent Manufacturing, Vol. 35, issue 2, pp. 555-574 (2024), doi:10.1007/s10845-022-02059-z
IMPACT OF A VARIATION IN WIRE FEED SPEED ON DEPOSITS FROM THE WIRE ARC ADDITIVE MANUFACTURING (WAAM), Alizee Remy, Uzoma Vincent Nwankpa, Matthieu Rauch, Jean Yves Hascoet, Guillaume Ruckert, Journal of Machine Engineering, Vol. 24, issue 2, pp. 117-128 (2024), doi:10.36897/jme/188308
Multiphysics modelling of Titanium alloy Ti-6Al-4V realised by Wire Arc Additive Manufacturing (WAAM), Alizée Remy, Matthieu Rauch, Jean Yves Hascoet, Guillaume Rückert, Manufacturing'21 (2024)
Gas-particle flow of cohesive aluminium powders during laser metal deposition – Experimental and numerical investigation, Stéphane Touzé, Matthieu Rauch, Jean Yves Hascoët, Advanced Powder Technology, Vol. 34, number 104182, issue 10 (2023), doi:10.1016/j.apt.2023.104182
A comparison of post-processing techniques for Additive Manufacturing components, Matthieu Rauch, Jean Yves Hascoet, Procedia CIRP, Procedia CIRP, Vol. 108, pp. 442-447 (2022), doi:10.1016/j.procir.2022.03.069
OPENING NEW OPPORTUNITIES FOR AERONAUTIC, NAVAL AND TRAIN LARGE COMPONENTS REALIZATION WITH HYBRID AND TWIN MANUFACTURING, M. Rauch, J. Y. Hascoet, Journal of Machine Engineering, Vol. 22 (2022), doi:10.36897/jme/155812
Une méthodologie pour la réalisation de pièces de grandes dimensions polymères par fabrication additive, Matthieu Rauch, Olivier Authelin, Jean Yves Hascoet, Luiz Bier, Manufacturing 21 (2022)
Investigation of deposition strategy on wire and arc additive manufacturing of aluminium components, Matthieu Rauch, Uzoma Vincent Nwankpa, Jean Yves Hascoet, Journal of Advanced Joining Processes, Vol. 4, number 100074 (2021), doi:10.1016/j.jajp.2021.100074
A multiaxis tool path generation approach for thin wall structures made with waam, Matthieu Rauch, Jean Yves Hascoet, Vincent Querard, Journal of Manufacturing and Materials Processing, Vol. 5, number 128, issue 4 (2021), doi:10.3390/jmmp5040128
Novel control model of Contact-Tip-to-Work Distance (CTWD) for sound monitoring of arc-based DED processes based on spectral analysis, Alexia Chabot, Matthieu Rauch, Jean Yves Hascoët, International Journal of Advanced Manufacturing Technology, Vol. 116, issue 11-12, pp. 3463-3472 (2021), doi:10.1007/s00170-021-07621-2
A novel method for additive manufacturing of complex shape curved parts by using variable height layers, Matthieu Rauch, Jorge Piedra Dorado, Jean Yves Hascoet, Guillaume Ruckert, Journal of Machine Engineering, Vol. 21, pp. 80-91 (2021), doi:10.36897/jme/138820
Thermal monitoring for metallic additive manufacturing multi-beads multi-layers parts, Matthieu Rauch, Jean Yves Hascoet, Clement Rousseau, Guillaume Ruckert, Journal of Machine Engineering, Vol. 21, pp. 92-100 (2021), doi:10.36897/jme/139158
Extending High Value Components Performances with Additive Manufacturing: Application to Naval Applications, Matthieu Rauch, Gatien Pechet, Jean Yves Hascoet, Guillaume Ruckert, Solid State Phenomena, Vol. 319, pp. 58-62 (2021), doi:10.4028/www.scientific.net/SSP.319.58
Towards defect monitoring for metallic additive manufacturing components using phased array ultrasonic testing, A. Chabot, N. Laroche, E. Carcreff, M. Rauch, J. Y. Hascoët, Journal of Intelligent Manufacturing, Vol. 31, issue 5, pp. 1191-1201 (2020), doi:10.1007/s10845-019-01505-9
Flowability characterization and enhancement of aluminium powders for additive manufacturing, S. Touzé, M. Rauch, J. Y. Hascoët, Additive Manufacturing, Vol. 36, number 101462, issue 5 (2020), doi:10.1016/j.addma.2020.101462
Effect of process parameters on track geometry, microstructural evolution on 316L stainless steel multi-layer clads, M. Manjaiah, J. Y. Hascoët, M. Rauch, Materials Science and Engineering B, Vol. 259, number 114583 (2020), doi:10.1016/j.mseb.2020.114583
A generic method to realize long fibers filled and large polymer parts in additive manufacturing, Jean Yves Hascoët, Olivier Authelin, Matthieu Rauch, Journal of Machine Engineering, Vol. 20, pp. 107-116 (2020), doi:10.36897/jme/118217
Repairing Ti-6Al-4V aeronautical components with DED additive manufacturing, Matthieu Rauch, Jean-Yves Hascoët, Manjaiah Mallaiah, MATEC Web of Conferences, Vol. 321, number 03017, issue 5 (2020), doi:10.1051/matecconf/202032103017
Towards a multi-sensor monitoring methodology for AM metallic processes, A. Chabot, M. Rauch, J. Y. Hascoët, Welding in the World, Vol. 63, issue 3, pp. 759-769 (2019), doi:10.1007/s40194-019-00705-4
Manufacturing of a hollow propeller blade with WAAM process - From the material characterisation to the achievement, G. Pechet, J. Y. Hascoet, M. Rauch, G. Ruckert, A. S. Thorr, Industry 4 0 Shaping the Future of the Digital World Proceedings of the 2nd International Conference on Sustainable Smart Manufacturing S2m 2019, pp. 155-160, ISBN:[9780367422721] (2019)
Interest of process monitoring and numerical simulation to improve metallic additive manufacturing processes, Alexia Chabot, Jean Yves Hascoët, Matthieu Rauch, Aip Conference Proceedings, Vol. 2113, ISBN:[9780735418479], AIP Publishing (2019), doi:10.1063/1.5112678