Journal2026

Magnetic pulse welding of Al-5754 with Al-7075 and MARS 380: Weldability windows and ballistic testing, Benoit Lagain, Thomas Heuzé, Guillaume Racineux, Michel Arrigoni, Defence Technology, Vol. 55, number 944, issue 5, pp. 64-79 (2026), doi:10.1016/j.dt.2025.07.024

Journal2026

MECHANICAL ANALYSIS OF THICK-WALLED LOW-CARBON STEEL STRUCTURES PRODUCED BY WIRE ARC ADDITIVE MANUFACTURING WITH ZIG-ZAG TRAJECTORIES, Abhishek Kumar Gupta, Ali Maden, Clea Plouze, Philippe Feraud, Catherine da Cunha, Matthieu Rauch, Helene Sapardanis, Journal of Machine Engineering, Vol. 26, issue 2, pp. 18-37 (2026), doi:10.36897/jme/221668

Book section2026

Optimizing Thermal Cycles in Wire-Arc Additive Manufacturing: Investigating Inter-Pass Time and Use of an External Cooling System, Anas Rassane, Emmanuel Bertrand, David Gloaguen, Grégoire Bazin, Simon Morville, Bruno Courant, Solid State Phenomena, Vol. 383, pp. 81-87 (2026), doi:10.4028/p-YcG4dp

Proceedings2026

Evaluating and comparing the environmental performance of manufacturing processes considering design for additive manufacturing: a case study based on Wire Arc Additive Manufacturing and green sand casting, Antoine Balidas, Olivier Kerbrat, Matthieu Rauch, Procedia CIRP, Procedia CIRP, Vol. 140, pp. 575-580 (2026), doi:10.1016/j.procir.2026.05.097

Journal2026

Impact of a prototype cable structure on distributed fiber optic sensing, Giuseppe Cappelli, Shane Murphy, Mael Arhant, Pascal Casari, Lionel Quetel, Peter Davies, Stephan Ker, Maïwenn Groleau, Giorgio Riccobene, Salvatore Viola, Sara Pulvirenti, Dídac Diego-Tortosa, Marc André Gutscher, Ocean Engineering, Vol. 362, number 126942, issue 11 (2026), doi:10.1016/j.oceaneng.2026.126942

Journal2026

Comparison of Fiber Volume Fraction measurement methods from composite micrographs, Félix Thébault, Alexandre Clément, Sylvain Fréour, Gwénolé Le Moal, Pascal Casari, Composites Science and Technology, Vol. 282, number 111689, issue 4 (2026), doi:10.1016/j.compscitech.2026.111689

Journal2026

Proof-of-concept of magnetic pulse disassembly of adhesively bonded Aluminum 2017 T4-MARS 300 specimen, Benoit Lagain, Thomas Heuzé, Guillaume Racineux, Michel Arrigoni, Sébastien Bergey, Thibaut Paccou, Camille Chauvin, International Journal of Solids and Structures, Vol. 332, number 113925, issue 10 (2026), doi:10.1016/j.ijsolstr.2026.113925

Book section2026

Experimental Study of the Flexural Strengthening of Steel Plates with Bonded Hybrid Flax/Carbon Composite Patches, M. A. Tazi, M. Jebli, S. Teixeira de Freitas, P. Casari, S. de Barros, 12th International Conference on FRP Composites in Civil Engineering (CICE 2025), Vol. 778 LNCE, pp. 1549-1558, ISBN:[9783032093868] (2026), doi:10.1007/978-3-032-09387-5_150

Journal2026

Experimental evaluation and analytical prediction of effects of skin defect size on the long-term durability of bio-based balsa core sandwich structures, Yuan Wu, Sylvain Fréour, Pascal Casari, Jamal Fajoui, Journal of Sandwich Structures and Materials, Vol. 28, number 1, pp. 115-135 (2026), doi:10.1177/10996362251361216

Journal2026

Hybrid flax/carbon bonded composite patches for strengthening of steel plates: layup and adhesive effect, Mohamed Amine Tazi, Mouad Jebli, Yuan Wu, Sofia Teixeira De Freitas, Pascal Casari, Silvio de Barros, Journal of Adhesion (2026), doi:10.1080/00218464.2026.2714433

Proceedings2026

Analyse des déformations et contraintes résiduelles induites dans des structures fabriquées par le procédé arc-fil WAAM.Mono-matériau ou bi-matériaux avec une structure graduée ou alternée., Bruno Courant, Pauline Arnoulin, Anas Rassane, Juliette Théodore, David Gloaguen, Baptiste Girault, Emmanuel Bertrand, Laurent Couturier, Pierre-Antoine Dubos, Samuel Branchu, Grégoire Bazin, Simon Morville, Stéphanie Colliou, Joe Kelleher, Lee Tung-Lik, Sandra Cabeza, Thilo Pirling, Efthymios Polatidis, Jan Capek, Matériaux 2026 (2026)

Proceedings2026

Etude des conditions de pré-filage d’un alliage 7010 : évolution microstructurale in situ par MEB-EDS et comportement en traction à chaud, Coralie Lu-Minh, Guillaume Racineux, Pierre-Antoine Dubos, Marion Girard, Samuel Branchu, Matériaux 2026 (2026)

Journal2026

Exploring the Limits of Low-Cost Metal FFF: Sintering and Porosity Effects in 316L Stainless Steel Parts, Tugdual Amaury Marie Le Néel, Mint Abat Ahmed El Hadi, Philippe Feraud, Matthieu Rauch, Journal of Manufacturing and Materials Processing, Vol. 10, number 319, issue 9 (2026), doi:10.3390/jmmp10090319

Proceedings2026

Measurement of Forces Generated during Robotized Additive Manufacturing Process Using Pellet Extruder, Salah Ouassil, Pascal Casari, Élodie Paquet, Guillaume Racineux, Key Engineering Materials, 29th International ESAFORM Conference on Material Forming – ESAFORM 2026, Vol. 1047, pp. 313 - 323 (2026), doi:10.4028/p-ly6b08

Proceedings2026

A Methodological Introduction to Digital Twins for Metal Additive Manufacturing: Challenges and Prospects, Shaoxuan Liang, Elodie Paquet, Matthieu Rauch, Mathieu Ritou, Conférence Manufacturing’21 (2026)

Proceedings2026

In-situ alloying in additivemanufacturing - Case of steels - Geometry, distortions and residual stresses, Bruno Courant, Pauline Arnoulin, Juliette Théodore, Baptiste Girault, Laurent Couturier, Emmanuel Bertrand, David Gloaguen, Pierre-Antoine Dubos, Samuel Branchu, Gregoire Bazin, Simon Morville, S Colliou, International Research & Innovation Conference (i-RIC 2026) (2026)

Journal2025

Closed-loop control of a directed energy deposition process for repair applications, Stéphane Touzé, Carolina Navarro Valero, Guillaume Rückert, Jean Yves Hascoët, Progress in Additive Manufacturing, Vol. 10, number 118, pp. 4843-4859 (2025), doi:10.1007/s40964-024-00867-8

Journal2025

miniBLAST: A Novel Experimental Setup for Laboratory Testing of Structures Under Blast Loads, A. Morsel, F. Masi, E. Marché, G. Racineux, P. Kotronis, I. Stefanou, Experimental Techniques, Vol. 49, number 2708, issue 9, pp. 655-675 (2025), doi:10.1007/s40799-024-00771-4

Journal2025

Investigation of the residual stresses and strains, microstructure and mechanical properties of stainless steel multipass welds produced using dual wire-tungsten inert gas process, Juliette Théodore, Baptiste Girault, Laurent Couturier, David Gloaguen, Emmanuel Bertrand, Pascal Paillard, Efthymios Polatidis, Jan Capek, Grégoire Bazin, Bruno Courant, Materialia, Vol. 40, number 102403 (2025), doi:10.1016/j.mtla.2025.102403

Journal2025

Characterization of the cyclic hygroscopic aging behavior of balsa wood core bio-composite sandwich structures with preexisting defects in laminate skins, Yuan Wu, Jamal Fajoui, Pascal Casari, Sylvain Fréour, Polymer Composites, Vol. 46, pp. 13893-13906 (2025), doi:10.1002/pc.30031

Journal2025

Data generation and deep neural network predictions for aged mechanical properties, Ênio H. Pires, Silvio de Barros, Pascal Casari, Marcelo L. Ribeiro, Polymer Engineering and Science, Vol. 65, number 1228, pp. 3029-3045 (2025), doi:10.1002/pen.27196

Proceedings2025

Experimental evaluation of the degradation of bio-based composites under extreme conditions: Impact on mechanical performance and durability, Yuan Wu, Jamal Fajoui, Pascal Casari, Sylvain Fréour, Mouna Bouziane, EPJ Web of Conferences, EPJ Web of Conferences, Vol. 326 (2025), doi:10.1051/epjconf/202532603003

Journal2025

Recoater design for a helical motion binder jet additive manufacturing 3D printer, Tarek Mesto, Tugdual Le Néel, Jean Yves Hascoët, Particuology, Vol. 98, issue 21, pp. 142-153 (2025), doi:10.1016/j.partic.2025.01.012

Proceedings2025

Analysis of the long-term hygroscopic ageing behavior of bio-composite sandwich structures with acoustic emission, Yuan Wu, Pascal Casari, Sylvain Fréour, Jamal Fajoui, Marianne Perrin, Marie-Laetitia Pastor, Xiaojing Gong, JNC 2025 - Les Journées Nationales sur les Composites (2025)

Proceedings2025

Heat transfer simulation of stationary shoulder friction stir welding on an AA6061 aluminium alloy, Tanguy Fajwisiewicz, Matthieu Guillo, Guillaume Racineux, Jean-Christophe Roux, Éric Feulvarch, FSWP2025 Conference on Friction Stir Welding and Processing (2025)

Proceedings2025

CHARACTERIZATION OF CYCLIC HYGROTHERMAL SWELLING AND SHRINKAGE BEHAVIOR OF BALSA WOOD AND GFRP-BALSA SANDWICH STRUCTURES, Yuan Wu, Pascal Casari, Jamal Fajoui, Sylvain Fréour, Mouna Bouziane, 14th International Conference on Sandwich Structures (ICSS-14) (2025)

Proceedings2025

Study of the staggering method applied to pass-to-pass gaps in automated fibre placement (AFP), Félix Thébault, Alexandre Clement, Sylvain Freour, Gwénolé Le Moal, Pascal Casari, Journées Nationales sur les Composites 2025 (2025)

Journal2024

Methodology for complexity and cost comparison between subtractive and additive manufacturing processes, S. Touzé, M. Rauch, J. Y. Hascoët, Journal of Intelligent Manufacturing, Vol. 35, issue 2, pp. 555-574 (2024), doi:10.1007/s10845-022-02059-z

Journal2024

Experimental evaluation of interface adhesion of a flax fiber composite patch with epoxy and polyurethane adhesives for the reinforcement of steel structures, Mohamed Amine Tazi, Rosemere de Araujo Alves Lima, Enio Henrique Pires da Silva, Mouad Jebli, Sofia Teixeira De Freitas, Pascal Casari, Silvio de Barros, International Journal of Adhesion and Adhesives, Vol. 129, number 103559, issue 3 (2024), doi:10.1016/j.ijadhadh.2023.103559

Journal2024

Investigation of residual stresses and modeling of tensile deformation in wire-arc additive manufactured 6061 aluminum alloy: Diffraction and elastoplastic self-consistent model, Gautier Doumenc, Bruno Courant, Laurent Couturier, Pascal Paillard, Baptiste Girault, Thilo Pirling, Sandra Cabeza, M. J. Moya, David Gloaguen, Materials Science and Engineering A, Vol. 890, number 145891 (2024), doi:10.1016/j.msea.2023.145891

Journal2024

Experimental Methodology to Identify Optimal Friction Stir Welding Parameters Based on Temperature Measurement, Moura Abboud, Laurent Dubourg, Guillaume Racineux, Olivier Kerbrat, Journal of Manufacturing and Materials Processing, Vol. 8, number 137, issue 4 (2024), doi:10.3390/jmmp8040137

Journal2024

Moisture Effects on Acoustic Emission Characteristics and Damage Mechanisms of Balsa Wood Core Composite Sandwich under 4-Point Bending, Yuan Wu, Marianne Perrin, Marie Laetitia Pastor, Pascal Casari, Xiaojing Gong, Materials, Vol. 17, number 1044, issue 5 (2024), doi:10.3390/ma17051044

Journal2024

Aging properties of a vegetable-based polyurethane foam under high relative humidity and different temperatures, Enio Henrique Pires Da Silva, Silvio De Barros, Pascal Casari, Marcelo Leite Ribeiro, Polymer Engineering and Science, Vol. 64, number 61, issue 4, pp. 2778-2794 (2024), doi:10.1002/pen.26725

Journal2024

IMPACT OF A VARIATION IN WIRE FEED SPEED ON DEPOSITS FROM THE WIRE ARC ADDITIVE MANUFACTURING (WAAM), Alizee Remy, Uzoma Vincent Nwankpa, Matthieu Rauch, Jean Yves Hascoet, Guillaume Ruckert, Journal of Machine Engineering, Vol. 24, issue 2, pp. 117-128 (2024), doi:10.36897/jme/188308

Journal2024

Raw dataset of compression tests on a vegetable oil-based polyurethane foam exposed to different ageing conditions, Enio  H   P Da Silva, Silvio De Barros, Pascal Casari, Marcelo L. Ribeiro, Data in Brief, Vol. 53, number 110199 (2024), doi:10.1016/j.dib.2024.110199

Proceedings2024

Reduced-scale Testing of Masonry Structures Subjected to Explosions, Ahmad Morsel, Filippo Masi, Ioannis Stefanou, Panagiotis Kotronis, Guillaume Racineux, Emmanuel Marché, World Congress on Civil Structural and Environmental Engineering, ISBN:[9781990800351] (2024), doi:10.11159/icsect24.132

Proceedings2024

Monitoring the temperature during thermoplastic composites assembling with fibre Bragg gratings: Validation using a rheometer, Adrian Korycki, Fabrice Carassus, Christan Garnier, France Chabert, Pascal Casari, Toufik Djilali, Materials Research Proceedings, Vol. 41, pp. 2678-2685, ISBN:[9781644903131] (2024), doi:10.21741/9781644903131-293

Journal2024

Fatigue behaviour of PVC foam core sandwich with GFRP faces: Simulation and experimental analysis, F. Alila, J. Fajoui, P. Casari, F. Jacquemin, M. Kchaou, Journal of Reinforced Plastics and Composites, Vol. 43, number 109963621879272, issue 6, pp. 1151-1164 (2024), doi:10.1177/07316844231201186

Journal2024

A novel mathematical-based approach to predict the high-speed deformation behavior of cryodeformed materials with varying stacking fault energies, B. Srinivas, S. K. Panigrahi, G. Racineux, S. Marya, Materials Science and Engineering A, Vol. 902, number 146538 (2024), doi:10.1016/j.msea.2024.146538

Proceedings2024

A fast testing method for mode-II fatigue crack growth of CFRP adhesive joints, Yuan Wu, Pascal Casari, Silvio De Barros, Adiana Silva, JST Endommagement et rupture des structures composites, Emmanuel Baranger (2024)

Proceedings2024

Tow-drop areas influence on composite laminates in Automated Fiber Placement, Félix Thébault, Alexandre Clément, Sylvain Fréour, Gwénolé Le Moal, Pascal Casari, Proceedings of the 21st European Conference on Composite Materials, Vol. 5, pp. 702, Nantes Université (2024), doi:10.60691/yj56-np80

Proceedings2024

Dynamics of moisture diffusion in epoxy resin : empirical and modeling insights into absorption-desorption behavior, Hamza Tarin, Jamal Fajoui, Julie Cocaud, Yuan Wu, Pascal Casari, Frédéric Jacquemin, Amandine Célino, Sylvain Fréour, Abdellah Arhaliass, Ahmed Rhallabi, Azzam El Maasri, Material Science, Vol. 2, pp. 714-721 (2024), doi:10.60691/yj56-np80

Proceedings2024

Modeling and experimental analysis of moisture diffusion behavior in bio-based balsa wood core composite sandwich, Yuan Wu, Jamal Fajoui, Pascal Casari, Sylvain Fréour, Marianne Perrin, Marie-Laetitia Pastor, Xiaojing Gong, Proceedings of the 21st European Conference on Composite Materials, Vol. 7, pp. 115, European Society for Composite Materials (ESCM) (2024), doi:10.60691/yj56-np80

Proceedings2024

Multiphysics modelling of Titanium alloy Ti-6Al-4V realised by Wire Arc Additive Manufacturing (WAAM), Alizée Remy, Matthieu Rauch, Jean Yves Hascoet, Guillaume Rückert, Manufacturing'21 (2024)

Journal2023

Characterisation of damage mechanisms of GFRP-balsa sandwich under 4-point bending based on two-step clustering process in acoustic emission analysis, Yuan Wu, Marie Laetitia Pastor, Marianne Perrin, Pascal Casari, Xiaojing Gong, Composites Part B Engineering, Vol. 260, number 110774, issue 11 (2023), doi:10.1016/j.compositesb.2023.110774

Journal2023

Relationship between microstructure, and residual strain and stress in stainless steels in-situ alloyed by double-wire arc additive manufacturing (D-WAAM) process, Juliette Théodore, Laurent Couturier, Baptiste Girault, Sandra Cabeza, Thilo Pirling, Renaud Frapier, Grégoire Bazin, Bruno Courant, Materialia, Vol. 30, number 101850, issue No 5 (2023), doi:10.1016/j.mtla.2023.101850

Journal2023

Gas-particle flow of cohesive aluminium powders during laser metal deposition – Experimental and numerical investigation, Stéphane Touzé, Matthieu Rauch, Jean Yves Hascoët, Advanced Powder Technology, Vol. 34, number 104182, issue 10 (2023), doi:10.1016/j.apt.2023.104182

Journal2023

Residual Stress Gradient Built in X40CrMoVN16-2 Austenitic Steel Cube Manufactured by Laser Powder Bed Fusion, B. Girault, M. Limousin, D. Gloaguen, L. Van Belle, P. A. Dubos, S. Branchu, M. Girard, P. Y. Durand, M. J. Moya, C. Colin, S. Kabra, W. Kockelmann, B. Courant, Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, Vol. 54, issue 10, pp. 4012-4030 (2023), doi:10.1007/s11661-023-07148-z

Journal2023

Characterization of Al-12Si Thin-Wall Properties Fabricated with Laser Direct Energy Deposition, Raihan Rumman, Mallaiah Manjaiah, Stéphane Touzé, Ruby Alice Sims, Jean Yves Hascoët, Jamie Scott Quinton, Sustainability Switzerland, Vol. 15, number 12806, issue 17 (2023), doi:10.3390/su151712806

Journal2023

An analytical approach of design for recycling of laminate structures by the use of magnetic pulse disassembling, Benoit Lagain, Thomas Heuzé, Guillaume Racineux, Michel Arrigoni, International Journal of Solids and Structures, Vol. 275, number 112290, issue 18 (2023), doi:10.1016/j.ijsolstr.2023.112290

Journal2023

Experimental Study of the Mechanical Behavior of Polyvinyl Chloride Foam under Shear Stress, Karim Mharsi, Jamal Fajoui, Pascal Casari, Mohamed Kchaou, Journal of Materials Engineering and Performance, Vol. 32, issue 17, pp. 7879-7894 (2023), doi:10.1007/s11665-022-07672-w

Journal2023

Electrohydraulic Crimping of Tubes within Rings, Ronan Le Mentec, Cheick Tidiane Sow, Thomas Heuzé, Patrick Rozycki, Guillaume Racineux, Metals, Vol. 13, number 1382, issue 8 (2023), doi:10.3390/met13081382

Journal2023

Numerical Analysis of Cross-Sectional Effects During the Magnetic Pulse Disassembly of Laminate Structures, Benoit Lagain, Thomas Heuzé, Guillaume Racineux, Michel Arrigoni, Advanced Engineering Materials, Vol. 25, number 108, issue 20 (2023), doi:10.1002/adem.202300728

Proceedings2023

Mechanical behaviour for aeronautical structures with embedded electric cables under low energy impact, T. Vogel, J. C. Walrick, P. Casari, Journal of Physics: Conference Series, Journal of Physics Conference Series, Vol. 2526 (2023), doi:10.1088/1742-6596/2526/1/012034

Book section2023

Friction Stir Welding Operating Window for Aluminum Alloy Obtained by Temperature Measurement, Moura Abboud, Laurent Dubourg, Adrien Leygue, Guillaume Racineux, Olivier Kerbrat, Friction Stir Welding and Processing XII, pp. 171-182, ISBN:[9783031226601] (2023), doi:10.1007/978-3-031-22661-8_16

Proceedings2023

ASSESSMENT OF 4-POINT BENDING FATIGUE PERFORMANCE OF COMPOSITE SANDWICHES WITH REDUCED CARBON FOOTPRINT, Yuan Wu, Pascal Casari, Marie Laetitia Pastor, Marianne Perrin, Xiaojing Gong, 9th International Conference on the Fatigue of Composites Icfc 2023 Scientific Program and Book of Abstracts (2023)

Journal2022

Establishing flow stress behaviour of Ti-6Al-4V alloy and development of constitutive models using Johnson-Cook method and Artificial Neural Network for quasi-static and dynamic loading, S. Deb, A. Muraleedharan, R. J. Immanuel, S. K. Panigrahi, G. Racineux, S. Marya, Theoretical and Applied Fracture Mechanics, Vol. 119, number 103338 (2022), doi:10.1016/j.tafmec.2022.103338

Journal2022

Investigation of microstructure, hardness and residual stresses of wire and arc additive manufactured 6061 aluminium alloy, Gautier Doumenc, Laurent Couturier, Bruno Courant, Pascal Paillard, Alexandre Benoit, Eric Gautron, B. Girault, Thilo Pirling, Sandra Cabeza, David Gloaguen, Materialia, Vol. 25, number 101520 (2022), doi:10.1016/j.mtla.2022.101520

Journal2022

A new methodology to predict moisture effects on mechanical behaviors of GFRP-BALSA sandwich by acoustic emission and infrared thermography, Yuan Wu, Marie Laetitia Pastor, Marianne Perrin, Pascal Casari, Xiaojing Gong, Composite Structures, Vol. 287, number 115342, issue 1 (2022), doi:10.1016/j.compstruct.2022.115342

Proceedings2022

A comparison of post-processing techniques for Additive Manufacturing components, Matthieu Rauch, Jean Yves Hascoet, Procedia CIRP, Procedia CIRP, Vol. 108, pp. 442-447 (2022), doi:10.1016/j.procir.2022.03.069

Journal2022

Analytical Estimation of Electromagnetic Pressure, Flyer Impact Velocity, and Welded Joint Length in Magnetic Pulse Welding, Rishabh Shotri, Koen Faes, Guillaume Racineux, Amitava De, Metals, Vol. 12, number 276, issue 2 (2022), doi:10.3390/met12020276

Journal2022

OPENING NEW OPPORTUNITIES FOR AERONAUTIC, NAVAL AND TRAIN LARGE COMPONENTS REALIZATION WITH HYBRID AND TWIN MANUFACTURING, M. Rauch, J. Y. Hascoet, Journal of Machine Engineering, Vol. 22 (2022), doi:10.36897/jme/155812

Journal2022

Effects on cavitation inception of leading and trailing edge flaps on a high-performance hydrofoil, Fatiha Mohammed Arab, Benoît Augier, François Deniset, Pascal Casari, Jacques André Astolfi, Applied Ocean Research, Vol. 126, number 103285, issue 12 (2022), doi:10.1016/j.apor.2022.103285

Journal2022

Improved Coil Design for Magnetic Pulse Welding of Metallic Sheets, Rishabh Shotri, Koen Faes, Guillaume Racineux, Amitava De, Journal of Manufacturing and Materials Processing, Vol. 6, number 144, issue 6 (2022), doi:10.3390/jmmp6060144

Journal2022

A NOVEL SLICING STRATEGY FOR CONTINUOUS PRINTING WITH A HELIX 3D PRINTER, Tugdual Le Neel, Tarek Mesto, Jean Yves Hascoet, Journal of Machine Engineering, Vol. 22, pp. 31-43 (2022), doi:10.36897/jme/151119

Journal2022

Impact strength of thermally aged double lap adhesively bonded joints, Marleine Morcos, Georges Challita, Vincent Legrand, Khaled Khalil, Pascal Casari, International Journal of Adhesion and Adhesives, Vol. 112, number 103029, issue 1415 (2022), doi:10.1016/j.ijadhadh.2021.103029

Journal2022

NOVEL ONE-DEGREE OF FREEDOM HELIX MACHINE ARCHITECTURE FOR ADDITIVE MANUFACTURING, Tugdual Le Neel, Jean Yves Hascoet, Journal of Machine Engineering, Vol. 22, pp. 5-18 (2022), doi:10.36897/jme/152244

Journal2022

Characterization shear properties of PVC foams instrumented by optical fiber under flexural loading, Karim Mharsi, Xavier Chapeleau, Jamal Fajoui, Amira Sellami, Pascal Casari, Mohamed Kchaou, Journal of Testing and Evaluation, Vol. 50, issue 4 (2022), doi:10.1520/JTE20200123

Journal2022

Some experiments inspired by the leptonic magnetic monopole of G. Lochak, G. de Lacheze-Murel, D. Fargue, C. Daviau, M. Karatchentzeff, A. Marizy, D. Priem, G. Racineux, Annales De La Fondation Louis De Broglie, Vol. 47, pp. 123-133 (2022)

Proceedings2022

Analyse comparative de cartographies du tenseur complet des contraintes résiduelles par diffraction des neutrons dans des alliages préparés par fusion laser sur lit de poudre., Baptiste Girault, David Gloaguen, Bruno Courant, Pierre-Antoine Dubos, Marie-José Moya, Maxime Limousin, Daniel Marcos, Saurabh Kabra, Winfried Kockelmann, J. Rebelo Kornmeier, Matériaux 2022 (2022)

Proceedings2022

Une méthodologie pour la réalisation de pièces de grandes dimensions polymères par fabrication additive, Matthieu Rauch, Olivier Authelin, Jean Yves Hascoet, Luiz Bier, Manufacturing 21 (2022)

Proceedings2022

Etablissement de fenêtre opératoire par une approche expérimentale de la mesure de température lors du procédé FSW, Moura Abboud, Laurent Dubourg, Adrien Leygue, Guillaume Racineux, Olivier Kerbrat, Conference Manufacturing21 (2022)

Journal2022

Quelques expériences inspirées par le monopôle magnétique leptonique de G. Lochak, Gaëtan de Lacheze-Murel, Daniel Fargue, Claude Daviau, Michel Karatchentzeff, Adrien Marizy, Didier Priem, Guillaume Racineux, Annales de la Fondation Louis de Broglie (2022)

Proceedings2022

Moisture effects on monitoring GFRP-balsa sandwich structure by acoustic emission and infrared thermography, Yuan Wu, Marie-Laetitia Pastor, Marianne Perrin, Pascal Casari, Xiaojing Gong, 13th International Conference on Sandwich Structures (ICSS-13) (2022)