Type de publication
Année
Quantifying the impact of grain size distribution models on ultrasonic attenuation in polycrystals, Ningyue Sheng, Shahram Khazaie, Ultrasonics, Vol. 170, number 108315, issue 1 (2027), doi:10.1016/j.ultras.2026.108315
Diffusion and physicochemical behavior of chloride and sodium ions in C-S-H gel pores : A molecular dynamics investigation, Tarek Ihaddadene, Jérôme Claverie, François Bignonnet, Ouali Amiri, Cement and Concrete Research, Vol. 199, number 108053, issue 3 (2026), doi:10.1016/j.cemconres.2025.108053
Tensile and shear behavior of recycled AA 6060 aluminium chips by direct hot extrusion, Thomas Corre, Jason Perrin, Johannes Gebhard, Théo Duchateau, Lola Lilensten, Mathilde Laurent-Brocq, A. Erman Tekkaya, Bertrand Huneau, Materials Science and Technology United Kingdom, Vol. 42, number 82, pp. 61-67 (2026), doi:10.1177/02670836241287768
Durability and microstructural evolution of metakaolin-based geopolymers under various coupled temperature and relative humidity conditions, M. Houhou, N. Leklou, H. Ranaivomanana, J. D. Penot, S. de Barros, Journal of Building Engineering, Vol. 120, number 115625, issue 14 (2026), doi:10.1016/j.jobe.2026.115625
Residual stresses and strains during laser assisted tape placement of thermoplastic composite: Multi-physical modelling and experimental validation, Mael Péron, Anna Maria El Bayssari, Anaïs Barasinski, Frédéric Jacquemin, Federica Daghia, Damien Guillon, Composites Part A Applied Science and Manufacturing, Vol. 202, number 109478 (2026), doi:10.1016/j.compositesa.2025.109478
Comparing the highly-resolved onset of Rayleigh–Taylor and Kelvin–Helmholtz Rayleigh–Taylor instabilities, Bhavna Joshi, Aditi Sengupta, Yassin Ajanif, Lucas Lestandi, European Journal of Mechanics B Fluids, Vol. 115, number 204382, issue 13 (2026), doi:10.1016/j.euromechflu.2025.204382
Influence of graphene oxide (GO) on thermo-mechanical performance of fly ash-steel slag based geopolymer composite: an experimental and numerical approach, Ranjit Singh, Ashwin Raut, Supriya Janga, Adeolu Adediran, Shaswat Kumar Das, Scientific Reports, Vol. 16, number 195, issue 1 (2026), doi:10.1038/s41598-026-46391-3
PINN-Based identification of spatially varying elastic moduli from experimental full-Field displacement data, R. Bouclier, R. Bonnet-Eymard, E. Rabineau, J. Réthoré, Computer Methods in Applied Mechanics and Engineering, Vol. 455, number 118874, issue 34 (2026), doi:10.1016/j.cma.2026.118874
Reactive MgO enhanced carbonation resistance in Alkali-Activated Materials: Insights into Mg-bearing phase evolution and possible M-S-H formation, Shaswat Kumar Das, Yuya Suda, Cement and Concrete Composites, Vol. 170, number 106572 (2026), doi:10.1016/j.cemconcomp.2026.106572
Thermal aging effects on microstructural, sorption and mechanical properties of bamboo fibers, Amine Fourari, Mouad Chakkour, Mohamed Ould Moussa, Ismail Khay, Tarak Ben Zineb, Cellulose, Vol. 33, number 5685, issue 22, pp. 695-716 (2026), doi:10.1007/s10570-025-06909-w
Contribution to C-(A)-S-H porosity characterisation of slag based cement pastes through a reconstitution of porous structure based on a combination of experimental and modelling approaches: influence of slag substitution rate on their porosity, morphology and pores interconnection, Mohamad Ali Ahmad, Harifidy Ranaivomanana, Stéphanie Bonnet, Paul Buttin, Valerie L’hostis, European Journal of Environmental and Civil Engineering, Vol. 30, number D189, issue 1 (2026), doi:10.1080/19648189.2026.2661732
A novel multiphysics-multiscale approach for seepage-induced erosion in granular slopes, Jie Yang, Zhen Yu Yin, Pierre Yves Hicher, Farid Laouafa, International Journal of Mechanical Sciences, Vol. 310, number 111088 (2026), doi:10.1016/j.ijmecsci.2025.111088
Influence of grain size distribution type on statistical moments of ultrasonic attenuations and phase velocities in random polycrystals, Ningyue Sheng, Shahram Khazaie, Mathilde Chevreuil, Sylvain Fréour, Ultrasonics, Vol. 157, number 107800, issue 3 (2026), doi:10.1016/j.ultras.2025.107800
A New Analytical Model for Progressive Damage in CFRP Composite Beams Under Low-Velocity Impact, Ramzi Othman, Usama Khashaba, Polymer Composites, Vol. 47, number 194, pp. 5126-5144 (2026), doi:10.1002/pc.70479
A new correlation model for ultrasonic attenuation in polycrystals with broad grain size distributions, Ningyue Sheng, Shahram Khazaie, Ultrasonics, Vol. 160, number 107924, issue 3 (2026), doi:10.1016/j.ultras.2025.107924
Efficient time-dependent fatigue reliability assessment accounting for material variability in steel structures, Valentine Rey, Clément Freyssinet, Franck Schoefs, Reliability Engineering and System Safety, Vol. 265, number 111536, issue 3 (2026), doi:10.1016/j.ress.2025.111536
Development of multi-phase titanium aluminides through twin wire arc additive manufacturing – microstructural analysis and mechanical performance evaluation, Ilyas Hussain, Uzoma Vincent Nwankpa, Md Saad Patel, Raja Gopala Chary Thipparthi, Jean Yves Hascoet, Surendar K. Marya, R. Jose Immanuel, Journal of Alloys and Compounds, Vol. 1062, number 187522, issue March (2026), doi:10.1016/j.jallcom.2026.187522
A comprehensive review on rubber materials: degradation pathways, modeling, future trends and applications, Mouad Chakkour, Amandine Célino, Sylvain Fréour, Iranian Polymer Journal English Edition, Vol. 35, number 1551, pp. 1317-1353 (2026), doi:10.1007/s13726-025-01584-x
Numerical models for coupling creep and fracture of concrete structures, M. Omar, G. Pijaudier-Cabot, A. Loukili, ISBN:[9789058095367] (2026), doi:10.1201/9781003762508-60
Predicting hygro-mechanical properties of natural Borassus fiber reinforced bio-based alkali activated matrix: an ensemble learning approach, Assia Aboubakar Mahamat, Moussa Mahamat Boukar, Nordine Leklou, Philbert Nshimiyimana, Ifeyinwa Ijeoma Obianyo, Blasius Ngayakamo, Results in Engineering, Vol. 29, number 109702, issue 2 (2026), doi:10.1016/j.rineng.2026.109702
Magnetic pulse welding of Al-5754 with Al-7075 and MARS 380: Weldability windows and ballistic testing, Benoit Lagain, Thomas Heuzé, Guillaume Racineux, Michel Arrigoni, Defence Technology, Vol. 55, number 944, issue 5, pp. 64-79 (2026), doi:10.1016/j.dt.2025.07.024
Effects of lime and fibers on ECB properties, Houcem Trabelsi, Souhir Elouze, Ines Garsellaoui, Stéphanie Bonnet, Concrete and Circular Economy, Vol. 63, pp. 241-247 (2026), doi:10.1007/978-3-032-06802-6_20
Influence of mixture parameters and material properties on the flow behavior of low-carbon self-consolidating concrete using explainable machine learning, Abdelhamid Hafidi, Benoit Hilloulin, Ilhame Harbouz, Ahmed Loukili, Ammar Yahia, Journal of Building Engineering, Vol. 119, number 115125, issue 7 (2026), doi:10.1016/j.jobe.2025.115125
Characterization and modeling of the viscoelastoplastic behavior of polyester mooring lines, Q. Viez-Pichonnier, P. Davies, P. Cartraud, Applied Ocean Research, Vol. 169, number 104976, issue no 23 (2026), doi:10.1016/j.apor.2026.104976
Machine Learning Based Environmental Impact Prediction of Construction Products Using EPD Data, Bishwash Neupane, Benoit Hilloulin, Raphael Chenouard, Emmanuel Roziere, Product Lifecycle Management. PLM in the Age of Model-Based Engineering in Industry, Vol. 772 IFIPAICT, pp. 366-375, ISBN:[9783032096999] (2026), doi:10.1007/978-3-032-09700-2_36
Fracture and fatigue crack growth in AA-6060 aluminium recycled by direct hot extrusion of chips, Jason Perrin, Thomas Corre, Oliver Schulz, Bertrand Huneau, Materials Science and Engineering A, Vol. 973, number 150661, issue 1 (2026), doi:10.1016/j.msea.2026.150661
MECHANICAL ANALYSIS OF THICK-WALLED LOW-CARBON STEEL STRUCTURES PRODUCED BY WIRE ARC ADDITIVE MANUFACTURING WITH ZIG-ZAG TRAJECTORIES, Abhishek Kumar Gupta, Ali Maden, Clea Plouze, Philippe Feraud, Catherine da Cunha, Matthieu Rauch, Helene Sapardanis, Journal of Machine Engineering, Vol. 26, issue 2, pp. 18-37 (2026), doi:10.36897/jme/221668
Approximation model of geometric factors for real-time assessment of on-site electrical resistivity of concrete, Wael Karam, Yann Lecieux, Mathilde Chevreuil, Franck Schoefs, Nondestructive Testing and Evaluation, Vol. 41, pp. 7662-7697 (2026), doi:10.1080/10589759.2025.2581824
Range-dependent shallow water sound source localization via digital twin model incorporating spectral element full-wave numerical simulation, Yihua Xing, Shahram Khazaie, Xun Wang, Journal of the Acoustical Society of America, Vol. 159, issue 2, pp. 1225-1234 (2026), doi:10.1121/10.0042404
A macro-element for circular shallow foundations on rigid inclusion-reinforced soil, Ramon Alcala-Ochoa, Zheng Li, Panagiotis Kotronis, Giulio Sciarra, Soil Dynamics and Earthquake Engineering, Vol. 202, number 110037, issue 190 (2026), doi:10.1016/j.soildyn.2025.110037
Molecular Insights Into the Water Freezing on Kaolinite Surfaces: The Key Role of Surface Properties, Yijie Wang, Zhen Yu Yin, Pierre Yves Hicher, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 50, number 12, pp. 3530-3545 (2026), doi:10.1002/nag.70280
Shear Behavior of Paris Green Clay-Concrete Interface Under Constant and Cyclic Temperature Loadings, Kexin Yin, Ngoc Hai Dong, Jinpeng Xu, Roxana Vasilescu, Geotechnical and Geological Engineering, Vol. 44, number 5153, issue 2 (2026), doi:10.1007/s10706-026-03644-2
The Influence of Grain Crushing and Pore Collapse on the Formation of Faults, N. A. Collins-Craft, I. Stefanou, J. Sulem, I. Einav, Journal of Geophysical Research Solid Earth, Vol. 131, number 211, issue 3 (2026), doi:10.1029/2025JB033062
Comprehensive Analysis of Gypsum Mortar with Glass Waste Aggregates as a Substitute for Sand, Mohamed Amine Ouared, Abdelkader Bougara, Ismail Yurtdas, Rodica Mariana Ion, Said Beldjilali, Nordine Leklou, Processes, Vol. 14, number 209, issue 2 (2026), doi:10.3390/pr14020209
Multiscale modelling of moisture diffusion in polymer/clay/fibre hybrid composites: Influence of nanoclay structure, Ali Makhloufi, Djelloul Gueribiz, Sylvain Fréour, Frédéric Jacquemin, Journal of Reinforced Plastics and Composites, number 1067, issue 3 (2026), doi:10.1177/07316844261427751
Comprehensive numerical hydrodynamic analysis of submarine in a straight course simulation using wall-resolved RANS models, Noh Zainal Abidin, Pol Muller, Jean François Sigrist, Frédéric Grondin, Ocean Engineering, Vol. 355, number 124992, issue June (2026), doi:10.1016/j.oceaneng.2026.124992
Mechanical and microstructural characterization of laminate composites hybridised with carbon fibre and rice husk particulate fillers, Dayanidhi Jena, Shaswat Kumar Das, Journal of Umm Al Qura University for Engineering and Architecture, Vol. 17, number 7761, issue 14, pp. 617-627 (2026), doi:10.1007/s43995-025-00251-9
Multi-GPU implementation of the Levy and Lindenbaum's method for streaming SVD with application to large datasets of KHRTI simulation, Yassin Ajanif, Lucas Lestandi, Luisa Silva, Aditi Sengupta, Bhavna Joshi, Hugues Digonnet, Computer Physics Communications, Vol. 329, number 110364, issue 1 (2026), doi:10.1016/j.cpc.2026.110364
Bidirectional Vibration and Fatigue Mitigation of a Barge-Type Floating Offshore Wind Turbine Using an Omnidirectional Tuned Mass Damper, Riad El hamoud, Philip Alkhoury, Abdul Hamid Soubra, Mourad Aït-Ahmed, Applied Ocean Research, Vol. 171, number 105066, issue 2 (2026), doi:10.1016/j.apor.2026.105066
Historical perspective on modelling of processing of polymer composites, Suresh G. Advani, Christophe Binetruy, ISBN:[9780443341205, 9780443341199] (2026), doi:10.1016/B978-0-443-34119-9.00017-6
Two-phase numerical modeling of interfacial dynamics in overmolding of thermoplastic composite inserts with short fiber-reinforced thermoplastics, Nazih Assaad Al Ayoubi, Hugues Digonnet, Luisa Silva, Christophe Binetruy, Sebastien Comas-Cardona, Thierry Renault, Composites Part B Engineering, Vol. 326, number 114044, issue 13 (2026), doi:10.1016/j.compositesb.2026.114044
Energy stable finite volume discretization for a compressible THM model in porous media, Mayssam Mohamad, Jad Dabaghi, Frédéric Grondin, Mazen Saad, Applied Numerical Mathematics, Vol. 230, issue 31, pp. 126-151 (2026), doi:10.1016/j.apnum.2026.07.011
Modeling of spatial variability of concrete cover apparent resistivity and depth in a reinforced concrete wharf from onsite measurements, Romain Clerc, Charbel Pierre El-Soueidy, Franck Schoefs, Case Studies in Construction Materials, Vol. 25, number e06316 (2026), doi:10.1016/j.cscm.2026.e06316
Optimizing Thermal Cycles in Wire-Arc Additive Manufacturing: Investigating Inter-Pass Time and Use of an External Cooling System, Anas Rassane, Emmanuel Bertrand, David Gloaguen, Grégoire Bazin, Simon Morville, Bruno Courant, Solid State Phenomena, Vol. 383, pp. 81-87 (2026), doi:10.4028/p-YcG4dp
Geometric Uncertainty Computation for Composite Sound Absorbing System by High-Order Perturbed X-FEM, Shaoqi Wu, Gregory Legrain, Olivier Dazel, Aeronautical, Aerospace and Mechanical Engineering, pp. 346-354, ISBN:[9781643686653] (2026), doi:10.3233/ATDE260528
Assessment of the Impact of MSW Leachate on the Geotechnical and Geochemical Characteristics of Marl-Bentonite Liners, Abdellah Demdoum, Elhadj Guesmia Daheur, Zhong Sen Li, Rüdiger Anlauf, Said Taibi, International Journal of Geosynthetics and Ground Engineering, Vol. 12, number 211, issue 4 (2026), doi:10.1007/s40891-026-00735-1
Keynote paper: Non local damage model with evolving internal length based on micromechanics, K. Haidar, G. Pijaudier-Cabot, J. F. Dubé, ISBN:[9789058095367] (2026), doi:10.1201/9781003762508-20
Numerical modeling of the nonlinear structural response of helically structured strands using a microscale informed Bouc–Wen model applied to helicoidal strands and submarine power cables, Lara Zeidan, Patrice Cartraud, Gilles Marckmann, Laurent Stainier, International Journal of Solids and Structures, Vol. 338, number 114089, issue 6 (2026), doi:10.1016/j.ijsolstr.2026.114089
Quantitative error assessment of radiative transfer approximations of acoustic wave energies in unbounded and bounded random media, L. De Abreu Corrêa, S. Khazaie, C. Gomez, R. Cottereau, Wave Motion, Vol. 143, number 103715, issue 2 (2026), doi:10.1016/j.wavemoti.2026.103715
Vertical vibrations of granular materials between two parallel horizontal walls, J. M. Bourinet, D. Le Houédec, ISBN:[9789054108849, 9781040897997] (2026), doi:10.1201/9781003761693-98
Editorial: Special issue on “Multiscale Modeling of Geomechanics”, Weijian Liang, Zhen Yu Yin, Pierre Yves Hicher, Computers and Geotechnics, Vol. 197, number 108116 (2026), doi:10.1016/j.compgeo.2026.108116
Biodynamic responses of the human hand-arm system under nail gun shock vibration and differences between males and females, Maxime Vincent, Akira Engelbrecht, Marc André Gaudreau, Mathias Legrand, Thomas Dupont, Pierre Marcotte, International Journal of Industrial Ergonomics, Vol. 113, number 103913, issue 3 (2026), doi:10.1016/j.ergon.2026.103913
Effect of mechanical loading on gas permeability and radiation shielding properties of concrete with low-clinker cement, Daria Jóźwiak-Niedźwiedzka, Marta Choinska Colombel, Paweł Lisowski, Dominik Nowicki, Jakub Ośko, Michał Kuć, Construction and Building Materials, Vol. 543, number 148138 (2026), doi:10.1016/j.conbuildmat.2026.148138
Comptes Rendus Mécanique, Valentine Rey, Comptes Rendus Mecanique, Vol. 354, issue G1, pp. 461-480 (2026), doi:10.5802/crmeca.362
Improved random hierarchical capillary bundle model for simulating the gas permeability evolution of alkali-activated concretes under thermal damage, Iman A.N.Omrani, Marcin Koniorczyk, Marta Choinska Colombel, Patrycja Duży, Izabela Hager, Ouali Amiri, Nordine Leklou, Elżbieta Habiera-Waśniewska, Scientific Reports, Vol. 16, number 179, issue 1 (2026), doi:10.1038/s41598-026-45134-8
One-dimensional dynamic fragmentation with the cohesive Lipschitz (CLIP) approach, Sachin Srinivasa, Benoît Lé, Nicolas Chevaugeon, Nicolas Moës, International Journal of Fracture, Vol. 250, number 55, issue 3 (2026), doi:10.1007/s10704-026-00928-9
Connecting Bond Switching to Fracture Toughness of Calcium Aluminosilicate Glasses, Sidsel Mulvad Johansen, Tao Du, Johan F.S. Christensen, Anders K.R. Christensen, Xuan Ge, Theany To, Lars R. Jensen, Morten M. Smedskjaer, Journal of the American Ceramic Society, Vol. 109, number 229, issue 7 (2026), doi:10.1111/jace.70956
Analysis of Diffusion Mechanisms in Adhesively Bonded Composite Reinforcements for Steel Structures, M. Medina, M. Girard, Emilie Lepretre, Sylvain Chataigner, 12th International Conference on FRP Composites in Civil Engineering (CICE 2025), Vol. 777 LNCE, pp. 1723-1732, ISBN:[9783032093981] (2026), doi:10.1007/978-3-032-09399-8_163
Evaluating and comparing the environmental performance of manufacturing processes considering design for additive manufacturing: a case study based on Wire Arc Additive Manufacturing and green sand casting, Antoine Balidas, Olivier Kerbrat, Matthieu Rauch, Procedia CIRP, Procedia CIRP, Vol. 140, pp. 575-580 (2026), doi:10.1016/j.procir.2026.05.097
Modelling the diffusive behavior of polymer foam immersed in water, Hireche Ahmed, Gueribiz Djelloul, Sylvain Fréour, Journal of Sandwich Structures and Materials, number 357 (2026), doi:10.1177/10996362261463393
Jacobi-accelerated FFT-based solver for smooth high-contrast data, Martin Ladecký, Ivana Pultarová, François Bignonnet, Indre Jödicke, Jan Zeman, Lars Pastewka, Computer Methods in Applied Mechanics and Engineering, Vol. 461, number 119269, issue 12 (2026), doi:10.1016/j.cma.2026.119269
Calcination of Mordenite-Rich Tuff and Its Effect on the Physical and Mechanical Properties of Cement Mortars, Meriem Meziani, Nordine Leklou, Nasser Chelouah, Ouali Amiri, Advances in Mechanics, Materials, and Manufacturing Processes, pp. 15-24, ISBN:[9783032201737] (2026), doi:10.1007/978-3-032-20174-4_2
Dynamic stiffness characterization and modelling of nylon mooring rope for floating wind turbines under realistic and regular loading conditions, M. Feuvrie, P. Cartraud, P. Davies, Ocean Engineering, Vol. 360, number 126042, issue 1718 (2026), doi:10.1016/j.oceaneng.2026.126042
A multi-scale approach for the localization of the moisture content in composites with two hydrophilic constituents, Melissa Said, A. Célino, G. Challita, S. Fréour, Journal of Composite Materials, number S22147853204082 (2026), doi:10.1177/00219983261420171
Survival Analysis of Fatigue Lifetime in Aged Elastomers Using Weibull and Cox Regression Models, M. Caillat, H. Madeira, P. Y. Le Gac, M. Le Gall, E. Verron, Fatigue and Fracture of Engineering Materials and Structures, Vol. 49, issue 9, pp. 3854-3873 (2026), doi:10.1111/ffe.70344
Linking material Symmetry and Domain of Elastic Behavior: New Numerical Insights, Christelle Combescure, Nicolas Auffray, Marc M. Francois, Nassim Kesmia, Comptes Rendus Mecanique, Vol. 354, issue G1, pp. 543-560 (2026), doi:10.5802/CRMECA.364
Inverse design of cement and cement paste composition for targeted tensile strength using sequential neural networks and hydration based micromechanical modelling, Jinane Murr, Syed Yasir Alam, Frédéric Grondin, Journal of Building Engineering, Vol. 118, number 115075, issue 3 (2026), doi:10.1016/j.jobe.2025.115075
Aggressive ion-induced efflorescence in FA-MK geopolymers: Impacts on durability, mechanical performance, and hydration phases, Ghimire Prateek, Qing feng Liu, Yuxin Cai, Xuan Gao, Zesen Peng, Ouali Amiri, Qing xiang Xiong, Journal of Building Engineering, Vol. 129, number 116746 (2026), doi:10.1016/j.jobe.2026.116746
Simplified structural assessment of large-diameter cylinder indentation with application to ship–semisubmersible floater collision analysis, Priscilla Salazar L., Gabriel Vandegar, Ye Pyae Sone Oo, Hervé Le Sourne, Philippe Rigo, Marine Structures, Vol. 110, number 104128, issue 5 (2026), doi:10.1016/j.marstruc.2026.104128
Mechanical behaviour and GWP-based environmental assessment of bi-layer reinforced concrete beams, Salma Es-Satte, Rayan Bzeih, Syed Yasir Alam, Jean Michel Torrenti, Yann Lecieux, Ahmed Loukili, Materials and Structures Materiaux Et Constructions, Vol. 59, number 1055, issue 7 (2026), doi:10.1617/s11527-026-03237-8
Using recycled concrete powder in sustainable cement-based materials: an updated review, Lei Yao, Zengfeng Zhao, Can Lin, Jiaqian Ning, Syed Yasir Alam, Nikola Tošić, Journal of Sustainable Cement Based Materials, Vol. 15, pp. 3313-3334 (2026), doi:10.1080/21650373.2026.2691297
Statistical Analysis of Energy Release Rate Evolution for Microstructurally Small Fatigue Cracks, Marie Bouyx, Aurélien Vattré, Julien Réthoré, Vincent Bonnand, Vincent Chiaruttini, Fatigue and Fracture of Engineering Materials and Structures, number 119759, issue 3 (2026), doi:10.1111/ffe.70330
Impact of a prototype cable structure on distributed fiber optic sensing, Giuseppe Cappelli, Shane Murphy, Mael Arhant, Pascal Casari, Lionel Quetel, Peter Davies, Stephan Ker, Maïwenn Groleau, Giorgio Riccobene, Salvatore Viola, Sara Pulvirenti, Dídac Diego-Tortosa, Marc André Gutscher, Ocean Engineering, Vol. 362, number 126942, issue 11 (2026), doi:10.1016/j.oceaneng.2026.126942
Characterization of the moisture content evolution of a flax/epoxy composite during the steps of an infusion manufacturing process, Benjamin Gaud, Amandine Célino, Sylvain Fréour, Mael Péron, Composites Part A Applied Science and Manufacturing, Vol. 208, number 109878 (2026), doi:10.1016/j.compositesa.2026.109878
An arbitrary-order time-sub-cycling framework for conservative partitioned fluid–structure interaction, Teddy Chantrait, Nicolas Chevaugeon, Alexandre Gangloff, Emmanuel Labourasse, Computer Methods in Applied Mechanics and Engineering, Vol. 461, number 119195, issue 11 (2026), doi:10.1016/j.cma.2026.119195
Impact of storage under high temperature and relative humidity on the properties of compressed earth bricks stabilized with biomass ash, Nadia Boussaa, Nasser Chelouah, Nordine Leklou, Fatma Kheloui, Materials and Structures Materiaux Et Constructions, Vol. 59, number 758, issue 1 (2026), doi:10.1617/s11527-025-02925-1
A Novel Framework for Understanding Multiaxial Fatigue of SBR Through Monitored Tension-Torsion Tests, Benjamin Martin, Erwan Verron, Michel Coret, Nathan Selles, Strain, Vol. 62, number 304, issue 4 (2026), doi:10.1111/str.70038
Investigation of energy absorption for 3D printed auxetic tubular structures, Talal Almalki, Mahmoud Azzahrani, Ghazi Alsoruji, Muhammad Basha, Ramzi Othman, Rapid Prototyping Journal, issue 4, pp. 1-13 (2026), doi:10.1108/RPJ-04-2025-0127
Prediction of moisture diffusion kinetics during cyclic hygrothermal aging of epoxy resin by an improved finite element modeling approach, Hamza Tarin, Jamal Fajoui, Julie Cocaud, Yuan Wu, Frédéric Jacquemin, Amandine Célino, Sylvain Fréour, Abdellah Arhaliass, Ahmed Rhallabi, Azzam El Masri, Discover Applied Sciences, Vol. 8, number 646, issue 2 (2026), doi:10.1007/s42452-025-08088-6
Treating complex geometries using voxel-based FEM, CDFEM, and fictitious domain method, Nagham Mawassy, Grégory Legrain, Valentine Rey, Xiaodong Liu, Finite Elements in Analysis and Design, Vol. 260, number 104604, issue 2 (2026), doi:10.1016/j.finel.2026.104604
Pampero HiFi: improvements in aerodynamic modeling of a spacecraft-oriented destructive re-entry code, Valentin Ledermann, Iko Midani, Eddy Constant, Pierre Van Hauwert, Martin Spel, Laurent Stainier, Julien Annaloro, Stéphane Galera, Ceas Space Journal, Vol. 18, number 35, issue 1, pp. 209-234 (2026), doi:10.1007/s12567-025-00655-2
Comparison of Fiber Volume Fraction measurement methods from composite micrographs, Félix Thébault, Alexandre Clément, Sylvain Fréour, Gwénolé Le Moal, Pascal Casari, Composites Science and Technology, Vol. 282, number 111689, issue 4 (2026), doi:10.1016/j.compscitech.2026.111689
Review and research gaps in Laminaria morphological and mechanical characteristics: Considerations for aquaculture structural design and reliability, Nazila Emamdoost, Franck Schoefs, Jean C. Thomas, Justine Dumay, Krish Thiagarajan Sharman, Algal Research, Vol. 97, number 104809, issue 9 (2026), doi:10.1016/j.algal.2026.104809
A new triangular lattice material testing device, Marc L.M. François, International Journal of Solids and Structures, Vol. 339, number 114160 (2026), doi:10.1016/j.ijsolstr.2026.114160
Thermo-mechanical behavior of ceramic sanitaryware waste-based alkali-activated mortars incorporating glaze under different curing regimes, Abir Rezzoug, Nordine Leklou, Kada Ayed, Rim Benkabou, Shaswat Kumar Das, Innovative Infrastructure Solutions, Vol. 11, number 112, issue 9 (2026), doi:10.1007/s41062-026-02903-8
Pampero HiFi: improvements in mechanical and fluid–structure interaction modeling for a spacecraft-oriented code, Valentin Ledermann, Eddy Constant, Martin Spel, Laurent Stainier, Julien Annaloro, Stéphane Galera, Ceas Space Journal, Vol. 18, number 113, issue 2, pp. 235-258 (2026), doi:10.1007/s12567-026-00704-4
Calibration of non local damage model with size effect law, K. Haidar, G. Pijaudier-Cabot, J. F. Dubé, ISBN:[9789058095367] (2026), doi:10.1201/9781003762508-29
Microstructural Transformations in Cold-Worked AZ61 Mg Alloy During Non-Isothermal Heating, Abdelali Hayoune, Jamal Fajoui, Ahmed Noumi, Yasser Mahfoud Ghimouze, Metallography Microstructure and Analysis, Vol. 15, number 114924, pp. 465-475 (2026), doi:10.1007/s13632-026-01312-8
Experimental development for measuring the influence of overloads on 3D short fatigue cracks with synchrotron X-ray tomography and digital volume correlation, Lucas Sanciet, Nathalie Limodin, Jean Yves Buffière, Jean François Witz, Ghita Bahaj Filali, Michel Coret, Julien Réthoré, Anne Bonnin, Andrew King, Arnaud Weck, International Journal of Fatigue, Vol. 213, number 109876, issue 8 (2026), doi:10.1016/j.ijfatigue.2026.109876
Multifunctional architectured and composite materials by design: geometry, experiments, coupling and multiscale challenges, Kostas Danas, Nicolas Auffray, Justin Dirrenberger, Julien Réthoré, Gaël Sebald, Antoine Le Duigou, Armel Mbiakop, Thierry Lacroix, Mechanics and Industry, Vol. 27, number 35, issue 1920 (2026), doi:10.1051/meca/2026031
Proof-of-concept of magnetic pulse disassembly of adhesively bonded Aluminum 2017 T4-MARS 300 specimen, Benoit Lagain, Thomas Heuzé, Guillaume Racineux, Michel Arrigoni, Sébastien Bergey, Thibaut Paccou, Camille Chauvin, International Journal of Solids and Structures, Vol. 332, number 113925, issue 10 (2026), doi:10.1016/j.ijsolstr.2026.113925
Benchmarking Permeability Predictions for an Engineered Reference Medium: Toward Calibration of Permeability Rigs, M. Bodaghi, M. Nikzad, C. Lira, A. Endruweit, I. Afgan, A. B. Albayraktar, C. Binetruy, S. Cassola, D. Droste, M. Duhovic, M. Faizan, S. Guessesma, L. Kärger, S. Kperegueni, A. Leitão, S. V. Lomov, S. M. Mokli, P. Mulye, D. May, M. Matveev, J. Machado, C. H. Park, K. Pilkauskas, M. Rouhi, S. Schlegel, T. Schmidt, M. Shakoor, E. Syerko, E. M. Sozer, R. Umer, M. Waqas, D. Weitze, H. Yazdani Nezhad, Polymer Composites, Vol. 47, pp. S490-S505 (2026), doi:10.1002/pc.70946
Benchmarking and sensitivity analysis of segmentation methods for image-based fiber detection in composites, Onur Yuksel, Guillaume Broggi, Robin Hartley, Vincent K. Maes, Theo Baumard, Christophe Binetruy, Anders Bjorholm Dahl, Christian Breite, Clemens Dransfeld, Wouter Grouve, Silvia Gomarasca, Rui Guo, Adrien Le Reun, Arthur Levy, David May, Mahoor Mehdikhani, Andrea Miene, Lars Pilgaard Mikkelsen, Diwakar Singh, Yentl Swolfs, Elena Syerko, James Kratz, Baris Caglar, Composites Part A Applied Science and Manufacturing, Vol. 211, number 110150, issue 5 (2026), doi:10.1016/j.compositesa.2026.110150
Equality-Based Weighted Residual Formulation for the Forced Vibration of a Beam With an Attached Dry Friction Damper, Arash Hashemi, Christophe Pierre, Mathias Legrand, Journal of Vibration and Acoustics, Vol. 148, number 101018, issue 5 (2026), doi:10.1115/1.4071675
Quantifying the impact of data quality on machine learning prediction: a large-scale study of construction product environmental declarations, Bishwash Neupane, Benoit Hilloulin, Raphael Chenouard, Emmanuel Roziere, International Journal of Life Cycle Assessment, Vol. 31, number 1308, issue 6 (2026), doi:10.1007/s11367-026-02676-3
Flow-induced random guided wave on an airfoil with application to passive structural health monitoring: A numerical study via an LES–SEM scheme, Junjie Limei, Qihang Qin, Shahram Khazaie, Xun Wang, Ultrasonics, Vol. 165, number 108086, issue 5 (2026), doi:10.1016/j.ultras.2026.108086
Review of Existing Lab Test Methods for External Sulfate Attacks and Recommendations for an Improved Testing Methodology, Véronique Baroghel-Bouny, Myriam Carcassès, Franck Cassagnabère, Nele De Belie, Chiara Ferraris, Fredrik P. Glasser, Li Ping Guo, Andreas Leemann, Klaus Lipus, Ahmed Loukili, Mathias Maes, Esperanza Menéndez Méndez, Samuel Meulenyzer, Florian Mittermayr, Othman Omikrine-Metalssi, Antonio Princigallo, Emmanuel Roziere, Manu Santhanam, Karen Scrivener, Anya Vollpracht, Kai Tai Wan, External Sulfate Attacks - Mechanisms, Field Behavior and Lab Test Methods, Vol. 48, pp. 117-212 (2026), doi:10.1007/978-3-032-19402-2_4
Soil suitability assessment for compressed earth block production, Noel Njimbong Chia, Mustapha Nouri, Paul Alain Nanssou Kouteu, Mahfoud Tahlaiti, Yvette Jiokap Nono, Abdelhafid Khelidj, Materials and Structures Materiaux Et Constructions, Vol. 59, number 1131, issue 1 (2026), doi:10.1617/s11527-025-02922-4
Simplified semi-analytical solutions for dynamic responses of composite cylinders subjected to far-field underwater explosions, Ye Pyae Sone Oo, Kevin Brochard, Hervé Le Sourne, Defence Technology, Vol. 57, number 366, issue February, pp. 183-201 (2026), doi:10.1016/j.dt.2025.09.032
The compressibility of kaolin clay: a micromechanical perspective based on DEM, Bo Liu, Zhen Yu Yin, Pierre Yves Hicher, Canadian Geotechnical Journal, Vol. 63, pp. 1-19 (2026), doi:10.1139/cgj-2024-0724
Data-driven material identification in heterogeneous viscoelastic media, Hossein Salahshoor, Michael Ortiz, Laurent Stainier, Journal of the Mechanics and Physics of Solids, Vol. 213, number 106635, issue 5 (2026), doi:10.1016/j.jmps.2026.106635
Predictive Modeling of Consistency Class Using Machine Learning Techniques on Industrial Concrete Datasets, Abdelhamid Hafidi, Benoit Hilloulin, Ilhame Harbouz, Ahmed Loukili, Ammar Yahia, RILEM Youth Symposium 2025 RYS2025, Vol. 67, pp. 334-347 (2026), doi:10.1007/978-3-032-14652-6_26
Random Generation of the Spatial Variability of the Mechanical Parameters of the Homogeneous Earth Dam, Lynda Belazouz, Karima Bouzelha, Hocine Hammoum, Nabil Issaadi, Ouali Amiri, Proceedings of the 5th International Conference on Sustainability in Civil Engineering - Volume 1, Vol. 733 LNCE, pp. 204-215, ISBN:[9789819510719] (2026), doi:10.1007/978-981-95-1072-6_20
Data-driven material identification in micromorphic continua, Jacinto Ulloa, Laurent Stainier, Journal of the Mechanics and Physics of Solids, Vol. 215, number 106742, issue 12 (2026), doi:10.1016/j.jmps.2026.106742
An adaptive multiphase finite element framework for simulating two-dimensional rotational molding, Gianni Barakat, Luisa Silva, Christophe Binetruy, Hugues Digonnet, Julien Sorbe, International Journal of Material Forming, Vol. 19, number 337, issue 2 (2026), doi:10.1007/s12289-026-02030-w
Experimental and numerical investigation of joule heating in carbon black modified cement pastes: Linking hydration, mechanical performance and electro-thermal behaviour, Imane Bekrine, Syed Yasir Alam, Construction and Building Materials, Vol. 539, number 147548 (2026), doi:10.1016/j.conbuildmat.2026.147548
Effect of Thermal Post-Treatment on the Mechanical Performance and Microstructure of Modified Photosensitive PLA/Starch Blends Obtained by Digital Light Processing, Mustapha Nouri, Sofiane Belhabib, Mahfoud Tahlaiti, Jaianth Vijayakumar, Elodie Boller, Sofiane Guessasma, Polymers, Vol. 18, number 836, issue 7 (2026), doi:10.3390/polym18070836
Sustainable Utilization of Industrial Solid Waste in Lightweight Concrete Blocks to Support Environmentally Friendly Cities, Lisa Oksri-Nelfia, Mindy Barend Wiguno, Krisma Adijaya, Yohans Sunarno, Ouali Amiri, Indonesian Journal of Urban and Environmental Technology, Vol. 9, pp. 250-268 (2026), doi:10.25105/urbanenvirotech.v9i1.24256
Chloride diffusivity and electrical resistivity of slag-based concrete reinforced by steel fibers: experimental study and multiscale modeling, Nicolas Reuge, Stéphanie Bonnet, François Bignonnet, European Journal of Environmental and Civil Engineering, Vol. 30, issue 4, pp. 1-26 (2026), doi:10.1080/19648189.2025.2532800
Automated In Situ Thermomechanical Analysis of Cobalt under EBSD, Inès Addi, Pierre Antoine Dubos, Baptiste Girault, Samuel Branchu, David Gloaguen, Solid State Phenomena, Vol. 383, pp. 97-102 (2026), doi:10.4028/p-hBLy4M
Experimental Study of the Flexural Strengthening of Steel Plates with Bonded Hybrid Flax/Carbon Composite Patches, M. A. Tazi, M. Jebli, S. Teixeira de Freitas, P. Casari, S. de Barros, 12th International Conference on FRP Composites in Civil Engineering (CICE 2025), Vol. 778 LNCE, pp. 1549-1558, ISBN:[9783032093868] (2026), doi:10.1007/978-3-032-09387-5_150
Experimental evaluation and analytical prediction of effects of skin defect size on the long-term durability of bio-based balsa core sandwich structures, Yuan Wu, Sylvain Fréour, Pascal Casari, Jamal Fajoui, Journal of Sandwich Structures and Materials, Vol. 28, number 1, pp. 115-135 (2026), doi:10.1177/10996362251361216
Hybrid flax/carbon bonded composite patches for strengthening of steel plates: layup and adhesive effect, Mohamed Amine Tazi, Mouad Jebli, Yuan Wu, Sofia Teixeira De Freitas, Pascal Casari, Silvio de Barros, Journal of Adhesion (2026), doi:10.1080/00218464.2026.2714433
A benchmark experiment to assess the performance of electrical resistivity tomography data inversion algorithms in the framework of nondestructive evaluation, Wael Karam, Yann Lecieux, Mathilde Chevreuil, Franck Schoefs, Nondestructive Testing and Evaluation, Vol. 41, issue 1, pp. 712-741 (2026), doi:10.1080/10589759.2025.2473038
Through-thickness compaction response of reinforcement fabrics: Development of a test standard, A. X.H. Yong, A. Endruweit, A. George, D. May, Y. A. Aksoy, M. A. Ali, T. Allen, M. Bender, M. Bodaghi, B. Caglar, H. Caglar, A. Chiminelli, S. Comas-Cardona, R. de Ribains, J. Dittmann, C. Dransfeld, E. Fauster, A. Guilloux, P. Hubert, S. Idapalapati, J. Ivens, J. Janzen, Y. Jiang, T. Khan, M. Laspalas, F. LeBel, J. Lee, X. Liu, M. Lizaranzu, S. V. Lomov, C. López, K. Masania, V. Michaud, P. Middendorf, S. Miguel, S. S. Narayana, C. H. Park, S. Ravisankar Padma, L. Riffard, C. Pinger, V. Rougier, H. Sas, D. Sayinbas, P. Sousa, M. Sozer, M. Steinhardt, R. Umer, J. D. Vincent, V. Werlen, O. Yuksel, Composites Part A Applied Science and Manufacturing, Vol. 200, number 109348, issue 2 (2026), doi:10.1016/j.compositesa.2025.109348
A New Global Approach to Design for Additive Manufacturing, R. Ponche, J. Y. Hascoet, O. Kerbrat, P. Mognol, ISBN:[9781032883618, 9781040531693] (2026), doi:10.1201/9781003537762-12
Valorization of dredged dam sediment as partial cement substitute in pervious concrete, Farida Amiar, Ourdia Fedaoui-Akmoussi, Ourdia Haddad, Nordine Leklou, Shaswat Kumar Das, Gradevinar, issue 6, pp. 309-319 (2026), doi:10.14256/JCE.4527.2026
Effect of curing stress on lime and cement-treated soil: X-ray tomography and mercury intrusion porosimetry investigation, L. Pigeot, N. Dufour, H. Calissano, L. Batilliot, M. Vanwolleghem, N. Lenoir, F. Dermenonville, A. Loukili, Acta Geotechnica, number 91, issue 4 (2026), doi:10.1007/s11440-026-03152-w
Analyse des déformations et contraintes résiduelles induites dans des structures fabriquées par le procédé arc-fil WAAM.Mono-matériau ou bi-matériaux avec une structure graduée ou alternée., Bruno Courant, Pauline Arnoulin, Anas Rassane, Juliette Théodore, David Gloaguen, Baptiste Girault, Emmanuel Bertrand, Laurent Couturier, Pierre-Antoine Dubos, Samuel Branchu, Grégoire Bazin, Simon Morville, Stéphanie Colliou, Joe Kelleher, Lee Tung-Lik, Sandra Cabeza, Thilo Pirling, Efthymios Polatidis, Jan Capek, Matériaux 2026 (2026)
Modelling permeability evolution in a suffusion context, Mohamed El Shamieh, Rachel Gelet, François Bignonnet, Ngoc-Son Nguyen, Didier Marot, 32nd European Working Groupe on Internal Erosion EWG-IE Meeting (2026)
An equality-based weighted residual formulation for three-dimensional contact in aeroengine blades, Sebastian Mcdonald, Rhys Aron, Mathias Legrand, Christophe Pierre, ASME Turbo Expo 2026 Turbomachinery Technical Conference and Exposition (GT2026), pp. 1-13 (2026)
Assessing Spatial Variability of Thermal Conductivity and Volumetric Heat Capacity in Hemp-Fibred Cob Walls through In-Situ Measurements, Ali Ahmad Waziri, Junior Tchiotsop, Romain Clerc, Nabil Issaadi, Philippe Poullain, Stéphanie Bonnet, Academic Journal of Civil Engineering (2026), doi:10.26168/ajce.43.5.11
Résidus pondérés en temps-fréquence pour les systèmes vibrants avec frottement de Stribeck, Christophe Pierre, Mathias Legrand, Arash Hashemi, Jonathan Hood, 17e Colloque National en Calcul des Structures, pp. 1-8 (2026)
(Model-Free) Data-Driven Computational under Unilateral Constraints: application to contact, Felipe Rocha, Laurent Stainier, CSMA 2026 (2026)
Caractérisation de l’amélioration mécanique de multicristaux par restructuration de la microstructure de surface, Matheus Santiago, Pierre-Antoine Dubos, David Gloaguen, Baptiste Girault, Matériaux 2026 (2026)
Temperature-dependent plastic behaviour of pure Ti and Co: in situ thermomechanical tests under electron back-scattered diffraction and X-ray diffraction coupled with scale transition modelling, Inès Addi, Pierre-Antoine Dubos, Baptiste Girault, David Gloaguen, 20th European Mechanics of Materials Conference (2026)
Essais thermo-micro-mécaniques automatiques in situ couplés à l’EBSD pour l’étude des transformations de phases et des mécanismes de déformation., Pierre-Antoine Dubos, Journée de la section Ouest de la SF2M 2026 (2026)
Investigation of size effects in miniaturized components with free edges using an FFT-based solver for non-local crystal plasticity, Lei Cai, François Bignonnet, Laurent Stainier, 17ème Colloque National en Calcul des Structures (2026)
Statistical Characterization of the Variability in Hygrothermal Properties of a Hemp-Fibred Cob Wall: Insights from an Expanded Two-Phase In-Situ Campaign, Ali Ahmad Waziri, Romain Clerc, Junior Tchiotsop, Nabil Issaadi, Philippe Poullain, Stéphanie Bonnet, Third RILEM International Conference on Earthen Construction, Vol. 77, pp. 418-428, Springer Nature Switzerland (2026), doi:10.1007/978-3-032-32331-6_40
In situ EBSD Characterization of Anisotropic Creep Behavior in a Thick Hydroformed AA2139 Part during in-forming artificial ageing, Calixte Gautier, Pierre-Antoine Dubos, David Gloaguen, Baptiste Girault, Maxime Rollin, ESAFORM 2026 Formability of Metallic Materials (2026)
Comparison of Interface Shear Behavior and Physical Properties of Sand-Clay Mixtures Prepared by Slurry and Dry Tamping Methods, Kexin Yin, Anne-Laure Fauchille, Roxana Vasilescu, Christophe Dano, Panagiotis Kotronis, Giulio Sciarra, Geotechnical Testing Journal, Vol. 49, number 420, issue 3 (2026), doi:10.1520/GTJ20250050
Analyse in situ par EBSD de l’évolution de la microstructure d’un alliage AA2XXX lors d’un revenu sous contrainte : étude de l’impact de la pré-déformation, Calixte Gautier, Pierre-Antoine Dubos, David Gloaguen, Baptiste Girault, Maxime Rollin, Matériaux 2026 (2026)
Analyse in situ du comportement thermomécanique de l'alliage 2139 sous MEB couplé à l'EBSD, Calixte Gautier, Pierre-Antoine Dubos, David Gloaguen, Baptiste Girault, Maxime Rollin, Mécamat Aussois 2026 Images, Mécanique et Matériaux (2026)
Frequency-time weighted residuals: a discontinuous formulation for unilateral contact events, Sebastian Mcdonald, Mathias Legrand, 17th World Congress on Computational Mechanics & 10th European Congress on Computational Methods in Applied Sciences and Engineering (2026)
Analyse des anisotropies thermique, élastique et plastique du Ti et du Co par un couplage entre essais in situ en DRX et modèles de transition d’échelles, Inès Addi, Pierre-Antoine Dubos, Baptiste Girault, David Gloaguen, Matériaux 2026 (2026)
Reconstruction de champs de contraintes à partir de données cinématiques résolues en temps : Cas d'une onde dans un matériau élastoplastique, Ningyue Sheng, Rian Seghir, Thomas Heuzé, Xiaodong Liu, 17ème Colloque National en Calcul des Structures (2026)
Topological Optimization of Shell Laminate Composites Parts Manufactured by the TFP Process, Peng Yu, Jessy Simon, Christophe Binetruy, Nahiene Hamila, Solid State Phenomena, Esaform, Vol. 387, pp. 1-8 (2026), doi:10.4028/p-pK41bI
In situ EBSD Characterisation of Anisotropic Creep Behaviour in a Thick AA2139 Part during in-forming artificial ageing, Calixte Gautier, Pierre Antoine Dubos, David Gloaguen, Baptiste Girault, Maxime Rollin, Solid State Phenomena, Vol. 388, issue 1-2, pp. 29-37 (2026), doi:10.4028/p-x19oZa
Etude des conditions de pré-filage d’un alliage 7010 : évolution microstructurale in situ par MEB-EDS et comportement en traction à chaud, Coralie Lu-Minh, Guillaume Racineux, Pierre-Antoine Dubos, Marion Girard, Samuel Branchu, Matériaux 2026 (2026)
Implémentation de la méthode des échelles multiples en calcul symbolique : outil d'analyse analytique de systèmes dynamiques nonlinéaires, Vincent Mahé, 17ème Colloque National en Calcul des Structures (2026)
Fracture Toughness of Periodic Beam Lattices, Gergely Molnár, Julien Réthoré, Journal of Theoretical, Computational and Applied Mechanics (2026), doi:10.46298/jtcam.14812
Weighted-residual based arclength continuation method, Vincent Mahé, Mathias Legrand, 17th World Congress on Computational Mechanics & 10th European Congress on Computational Methods in Applied Sciences and Engineering (2026)
Aperçu de l’apport de l’automatisation pour les évolutions microstructurales lors d’essais micro-thermo-mécaniques sous MEB, Pierre-Antoine Dubos, Samuel Branchu, Inès Addi, Calixte Gautier, Alexandre Fournier, Michel Coret, Coralie Lu-Minh, Marion Girard, Baptiste Girault, Dorian Nogues, Fabrice Martinez, Matt Nowell, David Gloaguen, Matériaux 2026 (2026)
Yield Behaviour of Thin Structures Containing Cavities – Applications to LPBF Components, Lilou Gautier, Mathilde Chevreuil, Xiaodong Liu, Didier Bardel, Julien Réthoré, 20th European Mechanics of Materials Conferences (EMMC20) (2026)
Review of "Fracture Toughness of Periodic Beam Lattices", Gergely Molnár, Julien Réthoré, Jean-Francois Ganghoffer, Alexander Popp (2026)
Investigations of raster layup effect on mechanical and fracture properties of material extruded ABS samples under biaxial loadings, Qun Wu, Joseph Marae Djouda, Benjamin Smaniotto, Rémi Legroux, François Hild, International Journal of Advanced Manufacturing Technology, Vol. 142, issue 1-2, pp. 377-397 (2026), doi:10.1007/s00170-025-17115-0
Exploring the Limits of Low-Cost Metal FFF: Sintering and Porosity Effects in 316L Stainless Steel Parts, Tugdual Amaury Marie Le Néel, Mint Abat Ahmed El Hadi, Philippe Feraud, Matthieu Rauch, Journal of Manufacturing and Materials Processing, Vol. 10, number 319, issue 9 (2026), doi:10.3390/jmmp10090319
FFT-based homogenization on boundary-conforming grids of finite elements, Francois Bignonnet, Martin Ladecký, Ivana Pultarova, Jan Zeman, 17ème Colloque National en Calcul des Structures (2026)
Reproduction of Data-Driven Identification on real experimental data, Nour Hachem, Adrien Leygue, Laurent Stainier (2026)
Attribute-Based Modeling for Life Cycle Assessment: from Linking Components to Improvement Implications, Shoeib Abdolmaleki, Yasamin Eslami, Benoit Hilloulin, Emmanuel Rozière, Catherine da Cunha, IFAC World Congress 2026 (2026)
Comparaison d'approches éléments finis pour le calcul à partir d'images, Nagham Mawassy, Grégory Legrain, Valentine Rey, Xiaodong Liu, 17ème Colloque National en Calcul des Structures (2026)
Fourier-based computational micromechanics on boundary-conforming transformed grids, François Bignonnet, Martin Ladecký, Ivana Pultarová, Jan Zeman, Comptes Rendus. Mécanique, Vol. 354, issue G1, pp. 227-256 (2026), doi:10.5802/crmeca.354
Reduced Thermomechanical Model of Transient Rotordynamics Resulting From Radial Rotor-Stator Contact, Coline Jacobs, Mathias Legrand, Fabrice Thouverez, Patricio Almeida, ASME Turbo Expo 2026 Turbomachinery Technical Conference and Exposition (GT2026) (2026)
Two-Point Correlation Function Models for Polycrystals with Wide Grain Size Distributions, Shahram Khazaie, Ningyue Sheng, 17ème Colloque National en Calcul des Structures (2026)
An Early-Stage Sustainability Assessment Framework: A Case Study on Aluminium Solid-State Recycling and Remelting, Lydia Lydia Assefa Bekele, Sundeep Tamak, Thomas Corre, Yasamin Eslami, IFAC World Congress 2026 (2026)
Periodic Response of a Beam With a Friction Damper Under Combined Friction and Unilateral Contact: An Equality-Based Formulation, Arash Hashemi, Christophe Pierre, Mathias Legrand, IDETC/CIE 2026 (2026)
A Decision-Support Framework for Enhancing the Reliability and Accuracy of Life Cycle Assessment and Product Carbon Footprint, Shoeib Faraji Abdolmaleki, Bishwash Neupane, Michael Adjei Mensah, Benoit Eynard, Julien Le Duigou, Benoit Hilloulin, Emmanuel Rozière, IFAC World Congress 2026 (2026)
Prise en compte de l'isotropie dans la méthode Data-Driven Identification, Nour Hachem, Adrien Leygue, Laurent Stainier, 17ème Colloque National en Calcul des Structures (2026)
Towards calibration of permeability rigs: Benchmarking predictions with a controlled reference medium, Masoud Bodaghi, Mostafa Nikzad, Cristian Lira, Andreas Endruweit, A Albayraktar, I Afgan, M Faizan, Stefano Cassola, Christophe Binetruy, David Droste, Miro Duhovic, M. Faizan, S. Guessesma, Luise Kärger, Sarabilou Kperegueni, João Afonso Leitão, Stepan V Lomov, Sandra Mokli, Paris Dilip Mulye, David May, M. Matveev, João Machado, Chung Hae Park, Mohammad S. Rouhi, S. Schlegel, Tim Schmidt, Modesar Shakoor, E. Sozer, Elena Syerko, Rehan Umer, D. Weitze, 17th International Conference on Flow Processes in Composite Materials (FPCM17) (2026)
Coupled use of X-ray tomography and mercury intrusion porosimetry to characterize the effect of curing stress on a stabilized silt, Lucile Pigeot, Nathalie Dufour, Hélène Calissano, Laurent Batilliot, Michel Vanwolleghem, Nicolas Lenoir, Fabienne Dermenonville, Ahmed Loukili, 21st INTERNATIONAL CONFERENCE ON SOIL MECHANICS & GEOTECHNICAL ENGINEERING (2026), doi:10.53243/ICSMGE2026-834
Stiffness and compressive strength of a stabilized soil cured under stress, Lucile Pigeot, Nathalie Dufour, Hélène Calissano, Laurent Batilliot, Fabienne Dermenonville, Ahmed Loukili, 21st INTERNATIONAL CONFERENCE ON SOIL MECHANICS & GEOTECHNICAL ENGINEERING (2026), doi:10.53243/ICSMGE2026-835
An Equality-Based Weighted Residual Formulation for Vibrating Systems With Stribeck Friction, Arash Hashemi, Jonathan Hood, Christophe Pierre, Mathias Legrand, IDETC/CIE 2026 (2026)
Measurement of Forces Generated during Robotized Additive Manufacturing Process Using Pellet Extruder, Salah Ouassil, Pascal Casari, Élodie Paquet, Guillaume Racineux, Key Engineering Materials, 29th International ESAFORM Conference on Material Forming – ESAFORM 2026, Vol. 1047, pp. 313 - 323 (2026), doi:10.4028/p-ly6b08
Environmental Product Declaration (EPD) -Artificial Intelligence (AI) integration for Product and Corporate Carbon Accounting, Bishwash Neupane, Raphael Chenouard, Benoit Hilloulin, Emmanuel Roziere, 4ème Congrès Annuel de la Société d'Automatique, de Génie Industriel et de Productique (SAGIP 2026) (2026)
Novel natural hydrogel-based, 3D-printed biomimetic prosthesis for breast volume reconstruction, Audrey Cherblanc, Baptiste Godet, Marilou Gleizes, Luciano Vidal, Christophe Marquette, Amélie Thepot, Morgan dos Santos, Caroline Durand, Scientific Reports (2026), doi:10.1038/s41598-026-64890-1
Modeling Large-Deformation Geotechnical Problems in Granular Soils: Integrating a Micromechanics-Based Model With the Explicit Finite Element Method, Chaofa Zhao, Qisen Niu, Zeyong Liu, Zhen Yu Yin, Pierre Yves Hicher, International Journal for Numerical and Analytical Methods in Geomechanics, number 248, issue 3 (2026), doi:10.1002/nag.70434
Hygroscopic multi-scale analysis and degradation of bamboo fiber composites, Mouad Chakkour, Mohamed Ould Moussa, Ismail Khay, Tarak Ben Zineb, International Journal of Damage Mechanics (2026), doi:10.1177/10567895261484778
Microstructural control of transport properties in silica fume concrete under seawater exposure, Walaa Farhat, Emmanuel Roziere, Stephanie Bonnet, Fib Symposium, pp. 3912-3921, ISBN:[9782940643318] (2026)
A robust comparative study of 112 chloride profiles from three reinforced concrete maritime structures on the French west coast, Cédric Hermann Kidiofinninpan Fofana, Romain Clerc, Franck Schoefs, Athanas Konin, Fib Symposium, pp. 6947-6956, ISBN:[9782940643318] (2026)
ALE-based finite element modeling of needle-punching using embedded 1D yarns in a 3D preform, Hugo Jamet, Guillaume Helbert, Jessy Simon, Florent Bouillon, Nahiène Hamila, Finite Elements in Analysis and Design, Vol. 262, number 104645, issue 12 (2026), doi:10.1016/j.finel.2026.104645
Numerical surrogate-based selection of identifiability-optimal mechanical testing specimen designs, Ninon Serrurier, Pascal Bouda, Sylvia Feld-Payet, Thomas Fourest, Julien Rethore, WCCM-ECCOMAS 2026 Congress (2026)
Correlative microscopy reveals chemical short-range order and native oxide in medium-entropy alloys, Yue Li, Siyuan Zhang, Christina Scheu, Yuan Wu, Zhaoping Lu, Baptiste Gault, Materials Today, Vol. 100, number 103524 (2026), doi:10.1016/j.mattod.2026.103524
A probabilistic framework for optimizing maintenance of reinforced concrete structures in marine environments, Quynh Chau Truong, Charbel Pierre El Soueidy, Emilio Bastidas-Arteaga, Results in Engineering, Vol. 32, number 113164 (2026), doi:10.1016/j.rineng.2026.113164
A Methodological Introduction to Digital Twins for Metal Additive Manufacturing: Challenges and Prospects, Shaoxuan Liang, Elodie Paquet, Matthieu Rauch, Mathieu Ritou, Conférence Manufacturing’21 (2026)
AI Strategies for Control and Monitoring in Bioprinting Processes: Accelerating the Path to Future Industrialization, Javier Arduengo, Nicolas Hascoët, Francisco Chinesta, Jean-Yves Hascoët, AI-Empowered Machinery Fault Diagnostics and Prognostics in Smart Manufacturing, ASME Press (2026), doi:10.1115/1.888971_ch13
In-situ alloying in additivemanufacturing - Case of steels - Geometry, distortions and residual stresses, Bruno Courant, Pauline Arnoulin, Juliette Théodore, Baptiste Girault, Laurent Couturier, Emmanuel Bertrand, David Gloaguen, Pierre-Antoine Dubos, Samuel Branchu, Gregoire Bazin, Simon Morville, S Colliou, International Research & Innovation Conference (i-RIC 2026) (2026)
Biological Degradation of Flax Fiber Biocomposites in Natural Seawater, V. Popineau, C. Baley, P. Davies, A. Célino, A. Le Duigou, Applied Composite Materials, Vol. 33, number 15009, issue 6 (2026), doi:10.1007/s10443-026-10554-2
PERFORMANCE OF CONCRETE INCORPORATING NICKEL SLAG AND GOLD TAILINGS AS PARTIAL REPLACEMENT MATERIALS, Lisa Oksri Nelfia, Julien Meret, Ouali Amiri, Yohans Sunarno, Deshinta Arrova Dewi, Paikun, International Journal of Geomate, Vol. 31, issue 145, pp. 10-20 (2026), doi:10.21660/2026.145.5387
A conceptual AI-driven architecture coupling sustainable materials data and structural performance, Assia Aboubakar Mahamat, Nordine Leklou, Innovative Infrastructure Solutions, Vol. 11, number 1, issue 11 (2026), doi:10.1007/s41062-026-03063-5
Modeling the chloride transport in concrete from microstructure generation to chloride diffusivity prediction, Liang yu Tong, Qing feng Liu, Qingxiang Xiong, Zhaozheng Meng, Ouali Amiri, Mingzhong Zhang, Computer Aided Civil and Infrastructure Engineering, Vol. 40, number 839, issue 7, pp. 1129-1149 (2025), doi:10.1111/mice.13331
Machine learning in concrete durability: challenges and pathways identified by RILEM TC 315-DCS towards enhanced predictive models, Woubishet Zewdu Taffese, Benoît Hilloulin, Yury Villagran Zaccardi, Afshin Marani, Moncef L. Nehdi, Muhammad Usman Hanif, Muralidhar Kamath, Sandra Nunes, Stefanie von Greve-Dierfeld, Antonios Kanellopoulos, Materials and Structures Materiaux Et Constructions, Vol. 58, number 1, issue 4 (2025), doi:10.1617/s11527-025-02664-3
Machine learning algorithms for supporting life cycle assessment studies: An analytical review, Bishwash Neupane, Farouk Belkadi, Marco Formentini, Emmanuel Rozière, Benoît Hilloulin, Shoeib Faraji Abdolmaleki, Michael Mensah, Sustainable Production and Consumption, Vol. 56, issue 16, pp. 37-53 (2025), doi:10.1016/j.spc.2025.03.015
Sliding and healing of frictional interfaces that appear stationary, Krittanon Sirorattanakul, Stacy Larochelle, Vito Rubino, Nadia Lapusta, Ares J. Rosakis, Nature, Vol. 639, issue 8056, pp. 947-953 (2025), doi:10.1038/s41586-025-08673-0
TEMPORARY REMOVAL: Probabilistic modelling of deterioration of reinforced concrete structures, Dimitri V. Val, Carmen Andrade, Miroslav Sykora, Mark G. Stewart, Emilio Bastidas-Arteaga, Jan Mlcoch, Quynh Chau Truong, Charbel Pierre El Soueidy, Structural Safety, Vol. 113, number 102454, issue 6 (2025), doi:10.1016/j.strusafe.2024.102454
The influence of sulfate attack on existing concrete bridges: Study of external sulfate attack (ESA), Mohammed Belghali, Kada Ayed, Mohamed Ezziane, Nordine Leklou, Construction and Building Materials, Vol. 483, number 141751 (2025), doi:10.1016/j.conbuildmat.2025.141751
Geopolymers in nuclear waste storage and immobilization: mechanisms, applications, and challenges, M. Houhou, N. Leklou, H. Ranaivomanana, J. D. Penot, S. de Barros, Discover Applied Sciences, Vol. 7, number 47957, issue 2 (2025), doi:10.1007/s42452-025-06536-x
Multiscale image-based modelling of composite materials, Dongze He, Yang Chen, Christian Breite, Mikhail Y. Matveev, Léonard Turpin, Elena Syerko, Guillaume Couégnat, Jeroen Soete, Mahoor Mehdikhani, Stepan V. Lomov, Yentl Swolfs, Philip J. Withers, International Materials Reviews, Vol. 70, issue 8, pp. 615-647 (2025), doi:10.1177/09506608251363653
Mechanochemical activation of basaltic fines, Sofiane Amroun, Luca Galli, Mahfoud Tahlaiti, Prannoy Suraneni, Cement and Concrete Research, Vol. 195, number 107923 (2025), doi:10.1016/j.cemconres.2025.107923
Dynamic evolution of multiscale pore structures and hydration behaviors of cement mixtures involving municipal solid waste incineration bottom ash (MSWIBA) through physicochemical activation, Yanlin Zhang, Hangjie Zhou, Tao Meng, Jie Yang, Jiaze Wang, Jiawen Wang, Rui Zeng, Su Wang, Yap Zhen Shyong, Cise Unluer, Shaoqin Ruan, Construction and Building Materials, Vol. 462, number 140024, issue 7 (2025), doi:10.1016/j.conbuildmat.2025.140024
Monitoring of drying and imbibition of concrete using embedded resistivity sensors for the estimation of permeability, Marie Ange Eid, Nicolas Reuge, Géraldine Villain, Stéphanie Bonnet, Sérgio Palma Lopes, Cement and Concrete Composites, Vol. 157, number 105900, issue 8 (2025), doi:10.1016/j.cemconcomp.2024.105900
Dynamic mechanical analysis of epoxy composites: Master curve construction and prony series fitting to investigate filler shape effects on viscoelastic properties, Siddharth Kumar, Shrushti Maheswari, Sarthak S. Singh, Patrick Rozycki, Emergent Materials, Vol. 8, number 231, issue 2, pp. 5085-5097 (2025), doi:10.1007/s42247-024-00992-8
Combined nanoindentation and SEM imaging for phase quantification and creep prediction of cementitious materials, Imane Bekrine, Benoit Hilloulin, Ahmed Loukili, Materials and Design, Vol. 250, number 113607 (2025), doi:10.1016/j.matdes.2025.113607
A hydraulic conductivity model incorporating adsorption and capillarity for unsaturated/frozen soil, Yijie Wang, Yandi Wu, Liming Hu, Pierre Yves Hicher, Zhen Yu Yin, Engineering Geology, Vol. 353, number 108093, issue 5 (2025), doi:10.1016/j.enggeo.2025.108093
Modeling the Swelling Behavior of Clayey Geomaterials Across Scales: Advances and Challenges, Hamza Mhamdi Alaoui, Chaofa Zhao, Wenbo Niu, Pierre Yves Hicher, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 49, number 3, issue 1, pp. 395-419 (2025), doi:10.1002/nag.3881
Investigation of the creep properties of blended cement pastes using combined nanoindentation and SEM imaging, Imane Bekrine, Benoit Hilloulin, Ahmed Loukili, Construction and Building Materials, Vol. 463, number 140103 (2025), doi:10.1016/j.conbuildmat.2025.140103
Test methods for chloride diffusivity of blended cement pastes: a review by RILEM TC 298-EBD, Neven Ukrainczyk, Thomas Bernard, Arezou Babaahmadi, Liming Huang, Christoph Zausinger, Anthony Soive, Stéphanie Bonnet, Fabien Georget, Maruša Mrak, Sabina Dolenec, Tobias Völker, Prannoy Suraneni, William Wilson, Materials and Structures Materiaux Et Constructions, Vol. 58, number 475, issue 10 (2025), doi:10.1617/s11527-025-02809-4
Integrated management of ferrochrome slag: Metal recovery, Cr(VI) stabilization, and sustainable reuse in construction materials, Ankit Kumar Tripathi, Shaswat Kumar Das, Syed Mohammed Mustakim, Sapan Kumar Kandi, Priyanka Rajput, Journal of Environmental Management, Vol. 390, number 126268 (2025), doi:10.1016/j.jenvman.2025.126268
Interfacial mechanical behavior of epoxy-quartz: MD nanoindentation and nanoscratching study, Pengchang Wei, Zhen Yu Yin, Pierre Yves Hicher, Wangqi Xu, Acta Geotechnica, Vol. 20, number 2132, issue 9, pp. 1599-1620 (2025), doi:10.1007/s11440-024-02503-9
Characterizing the onset and development of internal erosion in gap-graded soils under complex stress states, Bikram Oli, Rachel Gelet, Didier Marot, Fateh Bendahmane, Ngoc Son Nguyen, Jean Robert Courivaud, Acta Geotechnica, Vol. 20, number 1, issue 1, pp. 3581-3598 (2025), doi:10.1007/s11440-025-02573-3
Dynamic damage modelling through phase-field approaches: assessment, critical analysis and comparison, Lamia Mersel, Pascal Bouda, Jérémy Germain, Julien Réthoré, Comptes Rendus Mecanique, Vol. 353, issue G1, pp. 687-724 (2025), doi:10.5802/crmeca.297
Effects of Thermal Activation on Mechanical Performance and Sustainability of Slag-Based Geopolymers, Lais Alves, Nordine Leklou, Fábio de Simone e Souza, Silvio de Barros, Materials, Vol. 18, number 4419, issue 18 (2025), doi:10.3390/ma18184419
Long-term thermo-mechanical behaviour of an energy pile installed in clay: Field experiments and numerical simulations, Changhao Qiu, Roxana Vasilescu, Mirna Doghman, Hussein Mroueh, Thibault Badinier, Fabien Szymkiewicz, Aghiad Khadour, Van Tri Nguyen, Jean Michel Pereira, Panagiotis Kotronis, Anh Minh Tang, Energy and Buildings, Vol. 349, number 116498, issue 2 (2025), doi:10.1016/j.enbuild.2025.116498
A FDM-based experimental benchmark for evaluating quasistatic crack propagation in anisotropic linear elastic materials, Xinyuan Zhai, Thomas Corre, Véronique Lazarus, Engineering Fracture Mechanics, Vol. 324, number 111175, issue 112392 (2025), doi:10.1016/j.engfracmech.2025.111175
Digital design and manufacturing of a railway bogie demonstrator via multi-material wire arc directed energy deposition, Antoine Queguineur, Amirmohammad Daareyni, Hossein Mokhtarian, Matti Isakov, Remco Rook, Wei Ya, Constantinos Goulas, Jean Yves Hascoët, Iñigo Flores Ituarte, International Journal of Advanced Manufacturing Technology, Vol. 136, issue 11-12, pp. 5281-5303 (2025), doi:10.1007/s00170-025-15132-7
Influence of sample size on permeability of carbon–carbon composites with stochastic microstructure, T. Lavaggi, J. W. Gillespie, P. D. Mulye, C. Binetruy, S. G. Advani, Composites Part A Applied Science and Manufacturing, Vol. 198, number 109126, issue 10-11 (2025), doi:10.1016/j.compositesa.2025.109126
Influence of static and cyclic thermal loadings on the performance of fly ash–steel slag and fly ash–glass powder-based geopolymer composites, Supriya Janga, Ashwin Narendra Raut, Shaswat Kumar Das, Journal of Thermal Analysis and Calorimetry, Vol. 150, issue 14, pp. 10803-10820 (2025), doi:10.1007/s10973-025-14474-4
Hysteresis at low humidity on vapor sorption isotherm of Ca-montmorillonite: The key role of interlayer cations, Yijie Wang, Zhen Yu Yin, Pierre Yves Hicher, Liming Hu, Applied Clay Science, Vol. 263, number 107628, issue 6 (2025), doi:10.1016/j.clay.2024.107628
A POD-TANN Approach for the Multiscale Modeling of Materials and Macro-Element Derivation in Geomechanics, Giovanni Piunno, Ioannis Stefanou, Cristina Jommi, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 49, issue 2, pp. 700-719 (2025), doi:10.1002/nag.3891
Mapping indoor overheating exposure rate at city scale: A data-driven method based on building typologies and surrogate-modelling, Obaidullah Yaqubi, Sihem Guernouti, Auline Rodler, Marjorie Musy, Energy and Buildings, Vol. 332, number 115441 (2025), doi:10.1016/j.enbuild.2025.115441
Experimental evaluation of the time lag and decrement factor of a raw earth wall for various climates: Comparison of different methods, Yassine Elias Belarbi, Philippe Poullain, Ines Othmen, Nabil Issaadi, Stéphanie Bonnet, Nordine Leklou, Journal of Building Engineering, Vol. 113, number 113996 (2025), doi:10.1016/j.jobe.2025.113996
Methods for Defining Climate Change Mitigation Strategies at Organisational Level Review and Outlook, Nicolas Desmoitier, Jean Roman, Benoit Hilloulin, Emmanuel Rozière, Alexis Laurent, Business Strategy and the Environment, Vol. 34, number 407, issue 6223, pp. 2813-2834 (2025), doi:10.1002/bse.4130
Evaluating the importance of spatial variability of corrosion initiation parameters for the risk-based maintenance of reinforced concrete marine structures, Romain Clerc, Charbel Pierre El-Soueidy, Franck Schoefs, Structural Safety, Vol. 114, number 102568 (2025), doi:10.1016/j.strusafe.2024.102568
Closed-loop control of a directed energy deposition process for repair applications, Stéphane Touzé, Carolina Navarro Valero, Guillaume Rückert, Jean Yves Hascoët, Progress in Additive Manufacturing, Vol. 10, number 118, pp. 4843-4859 (2025), doi:10.1007/s40964-024-00867-8
CLOSED-LOOP CONTROL OF EXTRUSION-BASED BIOPRINTING THROUGH REAL-TIME COMPUTER VISION, Javier Arduengo, Nicolas Hascoet, Francisco Chinesta, Jean Yves Hascoet, Journal of Machine Engineering, Vol. 25, issue 2, pp. 28-42 (2025), doi:10.36897/jme/205422
Stress intensity factor determination along a kinked crack path by DIC analyses, T. Corre, F. Hild, V. Lazarus, International Journal of Fracture, Vol. 249, number 465, issue 3 (2025), doi:10.1007/s10704-025-00862-2
Computing the dynamic response of periodic waveguides with nonlinear boundaries using the wave finite element method, Vincent Mahé, Adrien Mélot, Benjamin Chouvion, Christophe Droz, Computers and Structures, Vol. 315, number 107778, issue 4 (2025), doi:10.1016/j.compstruc.2025.107778
Mathematical and numerical assessment of Data-Driven Identification method applied to nonlinear elasticity, Nour Hachem, Adrien Leygue, Laurent Stainier, Computer Methods in Applied Mechanics and Engineering, Vol. 446, number 118273, issue 1 (2025), doi:10.1016/j.cma.2025.118273
Modelling the impact of irrigated vegetation on urban microclimate: A review, Martina Garcia de Cezar, Bruno Cheviron, Severine Tomas, Merveil Muanda Lutete, Auline Rodler, Laurent Aprin, Science of the Total Environment, Vol. 997, number 180166, issue 19 (2025), doi:10.1016/j.scitotenv.2025.180166
Numerical modeling of inter-ply slippage in Non-Crimp Fabrics at the continuum level within the Arbitrary Lagrangian Eulerian framework, J. Simon, N. Hamila, Computer Methods in Applied Mechanics and Engineering, Vol. 445, number 118112, issue 4 (2025), doi:10.1016/j.cma.2025.118112
Calibration of the low-velocity impact experiments, Ramzi Othman, U. A. Khashaba, Polymer Composites, Vol. 46, number 7647, issue 8, pp. 12765-12779 (2025), doi:10.1002/pc.29896
Impact of flow direction and soil characteristics on suffusion susceptibility: Analyzing soil resistance and filtration effects, Dinh Minh Tran, Didier Marot, Fateh Bendahmane, Rachel Gelet, Geomechanics for Energy and the Environment, Vol. 42, number 100657, issue 5 (2025), doi:10.1016/j.gete.2025.100657
3D printable eco-efficient mortars under salt water: Mix design and characterization, Raghed Al Thib, Sébastien Rémond, Naima Belayachi, Elise Rémond, Ahmed Loukili, Construction and Building Materials, Vol. 501, number 144288, issue 1 (2025), doi:10.1016/j.conbuildmat.2025.144288
Influence of microencapsulated phase change materials on drying shrinkage, pore structure, and gas permeability of blast-furnace slag and metakaolin-based geopolymers, Bouha El Moustapha, Stéphanie Bonnet, Abdelhafid Khelidj, Nordine Leklou, Nicolas Maranzana, Isselmou Ahmedou Babah, Journal of Sustainable Cement Based Materials, Vol. 14, issue 48, pp. 2424-2440 (2025), doi:10.1080/21650373.2025.2532184
Adaptive parameters identification for nonlinear dynamics using deep permutation invariant networks, Mouad Elaarabi, Domenico Borzacchiello, Philippe Le Bot, Yves L.E. Guennec, Sebastien Comas-Cardona, Machine Learning, Vol. 114, number 16980, issue 1 (2025), doi:10.1007/s10994-024-06732-7
Phase-field and lip-field approaches for fracture with extreme mesh deformation (X-Mesh): a one-dimensional study, Nicolas Moës, Benoît Lé, Nicolas Chevaugeon, Jean François Remacle, Comptes Rendus Mecanique, Vol. 353, issue G1, pp. 1027-1051 (2025), doi:10.5802/CRMECA.318
Immersed boundary formulation for complex geometries in hypersonic flows: Application to atmospheric reentry, Iko Midani, Valentin Ledermann, Eddy Constant, Martin Spel, Laurent Stainier, Pierre Boivin, Julien Favier, Computers and Fluids, Vol. 299, number 106715, issue 01 (2025), doi:10.1016/j.compfluid.2025.106715
Plastic optical fiber sensors for mooring lines monitoring in floating wind turbines: A reliability study of OTDR measurement, Romain Grangeat, Marion Girard, Cyril Lupi, Dominique Leduc, Frédéric Jacquemin, Applied Ocean Research, Vol. 158, number 104541 (2025), doi:10.1016/j.apor.2025.104541
On the formulation and convergence of Data-Driven Identification, Adrien Leygue, Comptes Rendus Mecanique, Vol. 353, issue G1, pp. 761-773 (2025), doi:10.5802/crmeca.303
Sulfate attack of deep foundation concrete: New testing method and influence of temperature on degradation mechanism, Faten Souayfan, Farah Kaddah, Sonia Boudache, Stéphane Guerineau, Christophe Justino, Emmanuel Roziere, Case Studies in Construction Materials, Vol. 23, number e05368, issue 34 (2025), doi:10.1016/j.cscm.2025.e05368
Directional Corrosion Behavior of Cold-Rolled and Annealed 304L Stainless Steel: Role of Residual Stress and Phase Transformation, Mokded Bachani, Abdelali Hayoune, Jamal Fajoui, Pierre Antoine Dubos, Steel Research International, Vol. 96, number 154, pp. 285-294 (2025), doi:10.1002/srin.202401046
On-the-fly adaptive sampling strategy for data-driven computational mechanics: Applications to computational homogenisation, Felipe Rocha, Auriane Platzer, Adrien Leygue, Laurent Stainier, Mechanics of Materials, Vol. 207, number 105382, issue 3 (2025), doi:10.1016/j.mechmat.2025.105382
Swelling pressure of clayey geomaterials: A comprehensive analysis of experimental methods, numerical estimates and molecular dynamics simulations, Hamza Mhamdi Alaoui, Chaofa Zhao, Wenbo Niu, Daojia Wu, Pierre Yves Hicher, Applied Clay Science, Vol. 276, number 107881, issue 2 (2025), doi:10.1016/j.clay.2025.107881
Measurement, self-similarity, and TNT equivalence of blasts from exploding wires, A. Morsel, F. Masi, P. Kotronis, I. Stefanou, Shock Waves, Vol. 35, issue 1, pp. 17-35 (2025), doi:10.1007/s00193-024-01209-x
Thermal properties of recycled plastics waste/hemp shive composites, Lara Aldaou, Nabil Issaadi, Nordine Leklou, Ouali Amiri, Journal of Building Engineering, Vol. 108, number 112885, issue 17 (2025), doi:10.1016/j.jobe.2025.112885
miniBLAST: A Novel Experimental Setup for Laboratory Testing of Structures Under Blast Loads, A. Morsel, F. Masi, E. Marché, G. Racineux, P. Kotronis, I. Stefanou, Experimental Techniques, Vol. 49, number 2708, issue 9, pp. 655-675 (2025), doi:10.1007/s40799-024-00771-4
Consistent Eulerian and Lagrangian variational formulations of non-linear kinematic hardening for solid media undergoing large strains and shocks, Thomas Heuzé, Nicolas Favrie, Computer Methods in Applied Mechanics and Engineering, Vol. 433, number 117480, issue 12 (2025), doi:10.1016/j.cma.2024.117480
Discussion on “mechanical and structural analysis of metakaolin-based one-part geopolymers with the addition of magnesium oxide” by Zhang et al. (2025), Shaswat Kumar Das, Construction and Building Materials, Vol. 505, number 144744 (2025), doi:10.1016/j.conbuildmat.2025.144744
Grain-boundary refinement in wire-arc directed energy deposition of duplex stainless steel via in-process ultrasonic vibration, Antoine Queguineur, Olli Wiikinkoski, Mohammad Hallaji, Gaurav Mohanty, Jean Yves Hascoët, Iñigo Flores Ituarte, Welding in the World, Vol. 69, number 100255, pp. 3403-3413 (2025), doi:10.1007/s40194-025-02123-1
Shape Measurements of Lattice Materials from Few X-Ray Radiographs Using the 3D Virtual Image Correlation (3D-VIC) Method, L. Calmettes, M. L.M. François, J. Réthoré, Experimental Mechanics, Vol. 65, number 2495, issue 3, pp. 55-68 (2025), doi:10.1007/s11340-024-01116-3
Printing with earth: characterizing local soils for sustainable 3D construction, Yameng Ji, Philippe Poullain, Nordine Leklou, Materials and Structures Materiaux Et Constructions, Vol. 58, number 347, issue 9 (2025), doi:10.1617/s11527-025-02828-1
Analysis of the Influence of Excavated Soil Sand Characteristics on the Rheological and Mechanical Properties of Hydraulic Mortars, Lara Saad, Mustapha Nouri, Mahfoud Tahlaiti, Abdelhafid Khelidj, Julien Fruchet, Prannoy Suraneni, Buildings, Vol. 15, number 353, issue 3 (2025), doi:10.3390/buildings15030353
Experimental and theoretical investigation of the low velocity impact response of CFRP composite beams, Omar Baabdullah, Ramzi Othman, U. A. Khashaba, Results in Engineering, Vol. 28, number 107128, issue 2 (2025), doi:10.1016/j.rineng.2025.107128
Acoustic emission analysis and machine learning based identification of cracking events in self compacting fibre-reinforced mortars, Syed Yasir Alam, Ahmed Loukili, Journal of Materials Science, Vol. 60, issue 44, pp. 21925-21951 (2025), doi:10.1007/s10853-025-11651-6
Replication of an intervertebral disc using an in-house bioprinter: A proof-of-concept study, Emmaëlle Carrot, Perrine de Villemagne, Paul Humbert, Sébastien Grastilleur, Benoit Rosa, Boris Halgand, Yoan Le Guennec, Johann Clouet, Vianney Delplace, Pierre Weiss, Franck Halary, Jean Yves Hascoët, Marion Fusellier, Luciano Vidal, Jérôme Guicheux, Catherine Le Visage, International Journal of Bioprinting, Vol. 11, number 5021, issue 0, pp. 470-484 (2025), doi:10.36922/ijb.5021
Enforcement of the irreversibility condition in the phase field damage model: Influence of the history variable approximation, Abdelmalek Barki, Jihed Zghal, Laurent Gallimard, Isabelle Bruant, Nicolas Chevaugeon, Luc Davenne, Engineering Fracture Mechanics, Vol. 328, number 111518, issue 8 (2025), doi:10.1016/j.engfracmech.2025.111518
Investigation of the residual stresses and strains, microstructure and mechanical properties of stainless steel multipass welds produced using dual wire-tungsten inert gas process, Juliette Théodore, Baptiste Girault, Laurent Couturier, David Gloaguen, Emmanuel Bertrand, Pascal Paillard, Efthymios Polatidis, Jan Capek, Grégoire Bazin, Bruno Courant, Materialia, Vol. 40, number 102403 (2025), doi:10.1016/j.mtla.2025.102403
Nearly complete strain-induced phase transformation in cold-rolled pure cobalt, Inès Addi, Pierre Antoine Dubos, Baptiste Girault, David Gloaguen, Next Materials, Vol. 9, number 101109 (2025), doi:10.1016/j.nxmate.2025.101109
Transatlantic Coastal Community Voices on Floating Offshore Wind Farms With Artificial Reefs, Antoine Dubois, Alison Bates, Angela Lin, Franck Schoefs, Pierre Alexandre Mahieu, Wind Energy, Vol. 28, number 11, issue 6 (2025), doi:10.1002/we.70021
Chemical degradation vs. creep loading vs. hydration processes in cement-based materials immerged in seawater characterized with a multiscale model, Marinelle El-Khoury, Frédéric Grondin, Emmanuel Roziere, Rachid Cortas, Fadi Hage Chehade, Mechanics of Time Dependent Materials, Vol. 29, number 143, issue 3 (2025), doi:10.1007/s11043-025-09792-x
Microstructural effect of a new combined thermal and CO2 curing protocol for low-carbon cementitious materials, Imane Bekrine, Benoit Hilloulin, Ahmed Loukili, Journal of Building Engineering, Vol. 111, number 113160 (2025), doi:10.1016/j.jobe.2025.113160
Characterization of the cyclic hygroscopic aging behavior of balsa wood core bio-composite sandwich structures with preexisting defects in laminate skins, Yuan Wu, Jamal Fajoui, Pascal Casari, Sylvain Fréour, Polymer Composites, Vol. 46, pp. 13893-13906 (2025), doi:10.1002/pc.30031
Seepage Erosion and Stability Criterion for Construction and Demolition Waste Particles in Embankment Fill Applications, Qian Feng Gao, Xue Ke Shi, Zhongsen Li, Zhen Ning Shi, Ling Zeng, Chu Sheng Wang, Journal of Materials in Civil Engineering, Vol. 37, number 92, issue 11 (2025), doi:10.1061/JMCEE7.MTENG-20616
Molecular Dynamics Study on Quartz-Indenter Shape and Depth Effects in Epoxy Interfacial Mechanics, Pengchang Wei, Zhen Yu Yin, Pierre Yves Hicher, Yuanyuan Zheng, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 49, issue 13, pp. 2949-2964 (2025), doi:10.1002/nag.4021
Assessing the impact of carbonation on the CFRP-mortar bond: A combined mechanical and microstructural analysis, Dania Kabalan, Amandine Celino, Frédéric Grondin, Emmanuel Roziere, Construction and Building Materials, Vol. 493, number 143162 (2025), doi:10.1016/j.conbuildmat.2025.143162
Thermomechanical couplings of twinning Magnesium over a reversed load path, Necdet Ali Özdür, Sefer Can Erman, Laurent Stainier, Rian Seghir, C. Can Aydıner, Materials Today Communications, Vol. 46, number 112563, issue 2 (2025), doi:10.1016/j.mtcomm.2025.112563
Molecular insights into the shear behavior of interstratified illite-smectite clays: Effects of hydration and illitization, Wenbo Niu, Chaofa Zhao, Hamza Mhamdi Alaoui, Zhongxuan Yang, Pierre Yves Hicher, Geomechanics for Energy and the Environment, Vol. 44, number 100759, issue 3 (2025), doi:10.1016/j.gete.2025.100759
Quantification of localised strains induced within a granular medium by a biphasic flow via digital image correlation, Rana Al Nemer, Julien Réthoré, Giulio Sciarra, Strain, Vol. 61, issue 2 (2025), doi:10.1111/str.12480
Compressibility of Elastomer Matrix Composites Filled With Hollow Thermoplastic Microspheres Under Low Hydrostatic Pressure, B. Ruelle, P. Rublon, M. Coret, E. Verron, Strain, Vol. 61, number 107, issue 4 (2025), doi:10.1111/str.70013
Mechanical Properties of 3D-Printed Earth-Based Materials Considering Two Printable Soils, Yameng Ji, Philippe Poullain, Nordine Leklou, Journal of Materials in Civil Engineering, Vol. 37, number 150, issue 11 (2025), doi:10.1061/JMCEE7.MTENG-19828
Interpretable crack features for the representation of kinematic fields in the case of fatigue overloads, Ghita Bahaj Filali, Michel Coret, Adrien Leygue, Julien Réthoré, International Journal of Fracture, Vol. 249, number 364, issue 1 (2025), doi:10.1007/s10704-024-00830-2
Hysteresis at Low Relative Humidity on Vapor Sorption Isotherm of Na-Montmorillonite, Yijie Wang, Liming Hu, Zhen Yu Yin, Pierre Yves Hicher, Yandi Wu, Journal of Geotechnical and Geoenvironmental Engineering, Vol. 151, issue 11 (2025), doi:10.1061/JGGEFK.GTENG-13726
Evaluation of the compactness of granular mixes for roller compacted concrete design using SPO-ANN, Youcef Chakali, Ahmed Hadj Sadok, Nima Khodadadi, Mahfoud Tahlaiti, Antonio Nanni, Road Materials and Pavement Design, issue 4 (2025), doi:10.1080/14680629.2025.2584558
Reliability of the laboratory cob specimens manufacturing: Variability of hygrothermal properties at the wall scale, Junior Tchiotsop, Stéphanie Bonnet, Nabil Issaadi, Philippe Poullain, Construction and Building Materials, Vol. 497, number 143289, issue 8 (2025), doi:10.1016/j.conbuildmat.2025.143289
THE INTERPLAY OF CLAY BEHAVIOR AND PARTICLE STRUCTURING: A MULTISCALE INVESTIGATION, M. Ma, F. Bennai, M. Hattab, P. Y. Hicher, F. Nicot, IOP Conference Series: Earth and Environmental Science, Iop Conference Series Earth and Environmental Science, Vol. 1480 (2025), doi:10.1088/1755-1315/1480/1/012096
Physical-chemical characterization of a crystallinity gradient in a carbon black-filled PEEK laminate manufactured by laser-assisted tape placement, Noé Restif, Suzanne Laik, Mael Péron, Federica Daghia, Frédéric Jacquemin, Polymer, Vol. 332, number 128564, issue 4 (2025), doi:10.1016/j.polymer.2025.128564
Steel fiber-reinforced slag-based concretes for floats of FOWTs – The case of a slab as a preliminary approach: design, durability under chloride exposure and Life Cycle Assessment, Nicolas Reuge, Stéphanie Bonnet, Laurence Guihéneuf, Olivier Cornet, Anne Ventura, Case Studies in Construction Materials, Vol. 23, number e04824, issue 18 (2025), doi:10.1016/j.cscm.2025.e04824
Data generation and deep neural network predictions for aged mechanical properties, Ênio H. Pires, Silvio de Barros, Pascal Casari, Marcelo L. Ribeiro, Polymer Engineering and Science, Vol. 65, number 1228, pp. 3029-3045 (2025), doi:10.1002/pen.27196
Experimental evaluation of the degradation of bio-based composites under extreme conditions: Impact on mechanical performance and durability, Yuan Wu, Jamal Fajoui, Pascal Casari, Sylvain Fréour, Mouna Bouziane, EPJ Web of Conferences, EPJ Web of Conferences, Vol. 326 (2025), doi:10.1051/epjconf/202532603003
Restoration of hydroxyapatite particle thickness and crystalline orientation does not lead to recovery of tissue-scale mechanical properties in regenerating rat calvarial bone defects, Ameni Zaouali, David Gloaguen, Eric Le Bourhis, Pierre Antoine Dubos, Marie José Moya, Matthias Schwartzkopf, Tim Snow, Konrad Schneider, Baobao Chang, Fabienne Jordana, Solène Tessier, Pierre Tournier, Arnaud Paré, Pierre Weiss, Valérie Geoffroy, Baptiste Girault, Journal of the Mechanical Behavior of Biomedical Materials, Vol. 168, number 106998 (2025), doi:10.1016/j.jmbbm.2025.106998
A multiscale survey of the “Buckle Gum”: Hydrostatic response of elastomers filled with hollow thermoplastic microspheres, H. Madeira, L. Tanné, I. Pivdiablyk, M. Coret, P. Rublon, J. Papillon, J. Adrien, E. Verron, Materials and Design, Vol. 260, number 115234, issue 14 (2025), doi:10.1016/j.matdes.2025.115234
Influence of corn starch gel on the mechanical properties of compressed earth blocks made with termite mound soil from Macrotermes, Berthia Malonga, Philippe Poullain, Stéphanie Bonnet, Fateh Bendahmane, Nabil Issaadi, Ahmed Koubaa, Louis Ahouet, Materials and Structures Materiaux Et Constructions, Vol. 58, number 223, issue 10 (2025), doi:10.1617/s11527-025-02877-6
Micromechanical investigation of the asymptotic behaviour of granular materials, Bo Liu, Zhen Yu Yin, Pierre Yves Hicher, International Journal of Solids and Structures, Vol. 318, number 113423 (2025), doi:10.1016/j.ijsolstr.2025.113423
Effect of Heat Treatment on the Mechanical Properties of Electrospun Polymeric Nanofibrous Membranes, Zheng Hao Lau, Ai Bao Chai, Kim Yeow Tshai, Shiau Ying Ch’ng, Erwan Verron, Seong Chun Koay, Solid State Phenomena, Vol. 372, pp. 93-98 (2025), doi:10.4028/p-G4StGa
Influence of the Initial Clay Fabric on the Progressive Destructuring Process under One-Dimensional Compression, Mengyu Ma, Fares Bennai, Mahdia Hattab, Pierre Yves Hicher, François Nicot, Journal of Engineering Mechanics, Vol. 151, number 633, issue 11 (2025), doi:10.1061/JENMDT.EMENG-8387
MATERIAL CHARACTERIZATION FOR PARTICLE-FILLED RTM IN 3D FIBROUS PREFORMS, L. Marchand, S. Comas-Cardona, C. Binetruy, A. Hautefeuille, Iccm International Conferences on Composite Materials (2025)
Exploring Recycled Plastic Aggregates in Hemp Concrete, Lara Aldaou, Nabil Issaadi, Nordine Leklou, Ouali Amiri, Multiphysics and Multiscale Building Physics, Vol. 552 LNCE, pp. 502-508, ISBN:[9789819783045] (2025), doi:10.1007/978-981-97-8305-2_71
Designing Eco-Friendly Materials Intended for Repairing Reinforced Concrete Structures, Karim Belmokretar, Kada Ayed, Nordine Leklou, Djamel El Ddine Kerdal, Mohammed Mouli, Meftah Allal, The 1st International Conference on Net-Zero Built Environment, Vol. 237, pp. 765-777, ISBN:[9783031696251] (2025), doi:10.1007/978-3-031-69626-8_64
Effect of Hydric Condition on the Mechanical Properties of Cement and Lime-Treated Saharan Soils, Elhadj Guesmia Daheur, Abdellah Demdoum, Idriss Goual, Zhong Sen Li, Said Taibi, International Journal of Civil Engineering, Vol. 23, number 744, issue 3, pp. 2545-2565 (2025), doi:10.1007/s40999-025-01169-y
Fourier-based computational micromechanics on boundary-conforming transformed grids, François Bignonnet, Martin Ladecký, Ivana Pultarová, Jan Zeman, Comptes Rendus Mecanique, Vol. 354, issue G1, pp. 227-256 (2025), doi:10.5802/CRMECA.354
CO2 uptake by accelerated carbonation of recycled concrete aggregates: quantifying bound CO2 by a defined protocol, Thomas Pernin, Laurent Cassayre, Séverine Camy, Kilesh Jaunk-Eypersad, Farah Kaddah, Gaël Corvec, Jena Jeong, Emmanuel Roziere, Philippe Turcry, Ouali Amiri, Riccardo Artoni, Fib Symposium, pp. 868-877, ISBN:[9782940643295] (2025)
Optimizing the extraction of a novel fiber from cassava (Manihot esculenta) stems: a statistical approach, Noel Njimbong Chia, Mustapha Nouri, Paul Kouteu, Mahfoud Tahlaiti, Yvette Jiokap Nono, Abdelhafid Khelidj, Sivakumar Ramanathan, Cellulose, Vol. 32, issue 16, pp. 9245-9269 (2025), doi:10.1007/s10570-025-06775-6
Deep learning based predictions of Wöhler curve using physics-informed neural networks: self-heating determination of fatigue limits for laminated composite materials, Laurent Gornet, Procedia Structural Integrity, Procedia Structural Integrity, Vol. 75, pp. 129-139 (2025), doi:10.1016/j.prostr.2025.11.015
CO2 uptake by accelerated carbonation of recycled concrete aggregates: characterization at the grain scale by tomography and micro-indentation, Farah Kaddah, Jérôme Lux, Emmanuel Roziere, Philippe Turcry, Ouali Amiri, Harifidy Ranaivomanana, Abdelkarim Ait-Mokhtar, Fib Symposium, pp. 360-368, ISBN:[9782940643295] (2025)
STAMS 2023 / SEMTA-MECAMAT COLLOQUIUM Mechanics Across the Scales, M. P. Ariza, C. Czarnota, L. Stainier, J. A. Rodríguez-Martínez, Mechanics of Materials, Vol. 208, number 105414, issue STAMS 2023 / SEMTA-MECAMAT COLLOQUIUM Mechanics Across the Scales (2025), doi:10.1016/j.mechmat.2025.105414
Corrigendum to “Evaluating the importance of spatial variability of corrosion initiation parameters for the risk-based maintenance of reinforced concrete marine structures” [Struct. Saf. 114 (2025) 102568] (Structural Safety (2025) 114, (S0167473024001395), (10.1016/j.strusafe.2024.102568)), Romain Clerc, Charbel Pierre El-Soueidy, Franck Schoefs, Structural Safety, Vol. 116, number 102618 (2025), doi:10.1016/j.strusafe.2025.102618
Investigation of Microstructure Development of Cement Pastes Incorporating Calcined Clay Using Coupled Statistical Nanoindentation and XRD/Rietveld Analysis, Imane Bekrine, Benoît Hilloulin, Ahmed Loukili, Calcined Clays for Sustainable Concrete, Vol. 57, pp. 307-319 (2025), doi:10.1007/978-3-031-83889-7_30
Utilizing Experimental Data in a Model-Free Data-Driven Method: The Case of Thermal Conduction, Jakob Platen, Atul Anantheswar, Felix Harazin, Johannes Storm, Michael Scherkenbach, Markus Oeser, Laurent Stainier, Michael Kaliske, International Journal for Numerical Methods in Engineering, Vol. 126, number 1, issue 22 (2025), doi:10.1002/nme.70165
Influence of Interlayer Properties on the Mechanical Performance of Multi-Layered Concrete Structures, Salma Es-Satte, Syed Yasir Alam, Jean Michel Torrenti, Ahmed Loukili, Fib Symposium, pp. 2092-2301, ISBN:[9782940643295] (2025)
Natural Fiber Composites for Sustainable Model Rocketry: Bamboo and Jute as Alternatives to Fiberglass, Lais Alves, Tabata Barreto, Nordine Leklou, Silvio de Barros, Fibers, Vol. 13, number 159, issue 12 (2025), doi:10.3390/fib13120159
Correction to: Influence of Plastic Anisotropy and Strain path on strain-induced Phase Transformation of Cobalt (Metals and Materials International, (2024), 30, 1, (1-12), 10.1007/s12540-023-01490-y), Pierre Antoine Dubos, Jamal Fajoui, Nadjib Iskounen, Baptiste Girault, David Gloaguen, Metals and Materials International, Vol. 31, pp. 623 (2025), doi:10.1007/s12540-024-01829-z
Recoater design for a helical motion binder jet additive manufacturing 3D printer, Tarek Mesto, Tugdual Le Néel, Jean Yves Hascoët, Particuology, Vol. 98, issue 21, pp. 142-153 (2025), doi:10.1016/j.partic.2025.01.012
Evaluation of concrete performance: from improving existing durability tests to the definition of new protocols, Emmanuel Rozière, Philippe Turcry, Franck Cassagnabere, Philippe Fonollosa, Fib Symposium, pp. 625-632, ISBN:[9782940643295] (2025)
Anisotropic expansion and shrinkage behavior of thermosetting prepreg layups with respect to the compaction strategy, Sourour Traouli, Steven Le Corre, Vincent Sobotka, Mael Péron, Jago Pridie, Materials Research Proceedings, Vol. 54, pp. 2361-2370, ISBN:[9781644903599] (2025), doi:10.21741/9781644903599-255
PerfDub project Data Base on concrete mixes and its exploitation, Jonathan Mai-Nhu, François Cussigh, Philippe Turcry, Emmanuel R.O. Ziere, Michaël Dierkens, Gabriel Pham, François Toutlemonde, Patrick Rougeau, Fib Symposium, pp. 804-812, ISBN:[9782940643295] (2025)
Experimental assessment and 2D-Modelling of the viscous sintering of superimposed filaments based on biopolymer, Laurent Chaunier, Mélanie Thadasack, Anne Laure Reguerre, Achraf Chebbi, Lucas Huttin, Amélie Moisy, Sébastien Comas-Cardona, Timm Weitkamp, Materials Research Proceedings, Vol. 54, pp. 2-11, ISBN:[9781644903599] (2025), doi:10.21741/9781644903599-1
A Single Tensile Test for TRIP–TWIP Mechanisms High-Throughput Mapping in a Compositionally Graded Ti–Nb Alloy, Clémence Fontaine, Thomas Corre, Loïc Perrière, Hugo P. Van Landeghem, Daniel Galy, Thomas Belforti, Philippe Vermaut, Fan Sun, Frédéric Prima, Lola Lilensten, Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, Vol. 56, number 506, issue 7, pp. 4737-4743 (2025), doi:10.1007/s11661-025-07941-y
Monitoring the electrical resistivity profiles of ordinary and slag concrete samples subjected to artificial tidal cycles, Sérgio Palma Lopes, Marie Ange Eid, Géraldine Villain, Stéphanie Bonnet, Fib Symposium, pp. 653-660, ISBN:[9782940643295] (2025)
Leveraging Machine Learning (ML) to Enhance the Structural Properties of a Novel Alkali Activated Bio-Composite, Assia Aboubakar Mahamat, Moussa Mahamat Boukar, Ifeyinwa Ijeoma Obianyo, Philbert Nshimiyimana, Blasius Ngayakamo, Nordine Leklou, Numfor Linda Bih, Journal of Composites Science, Vol. 9, number 464, issue 9 (2025), doi:10.3390/jcs9090464
Experimental Assessment of the Dynamic Hygrothermal and Mechanical Behavior of Compressed Earth Block Walls in a Tropical Humid Climate, Armel B. Laibi, Philippe Poullain, Nordine Leklou, Moussa Gomina, Buildings, Vol. 15, number 3484, issue 19 (2025), doi:10.3390/buildings15193484
Special issue JTCM on “continuous-discontinuous long fiber-reinforced polymer composite structures”, Thomas Böhlke, Christophe Binetruy, Frank Henning, Andrew Hrymak, Luise Kärger, Loredana Kehrer, Kay Weidenmann, Mehrdad N. Ghasemi-Nejhad, Journal of Thermoplastic Composite Materials, Vol. 38, issue 8, Special issue JTCM on “continuous-discontinuous long fiber-reinforced polymer composite structures”, pp. 2853-2854 (2025), doi:10.1177/08927057251341503
Squeeze test: A toolkit for assessing the printability of stiff cement-based materials, Ilhame Harbouz, Ammar Yahia, Emmanuel Roziere, Ahmed Loukili, Construction and Building Materials, Vol. 491, number 142521, issue 4 (2025), doi:10.1016/j.conbuildmat.2025.142521
REMOTE MONITORING OF THE GROWTH OF BIOFOULING ON DYNAMIC ELECTRICAL CABLES AND MOORING LINES OF FLOATING WIND TURBINE, Ziad Maksassi, Ahmed Gueled, Benoît Parrein, Bertrand Garnier, Franck Schoefs, Proceedings of ASME 2025 6th International Offshore Wind Technical Conference Iowtc 2025, ISBN:[9780791889282] (2025), doi:10.1115/IOWTC2025-164459
AIRFLOW-INDUCED RANDOM VIBRATION PROPAGATION IN AN AIRFOIL STRUCTURE: A NUMERICAL STUDY COMBINING LES AND SEM, Junjie Limei, Qihang Qin, Xun Wang, Shahram Khazaie, Proceedings of the International Congress on Sound and Vibration, ISBN:[9788994021423] (2025)
Optimizing nanoparticle design for selective targeting of breast cancer cells, Sarah Iaquinta, Shahram Khazaie, Sylvain Fréour, Frédéric Jacquemin, Medical Engineering and Physics, Vol. 145, number 104420, issue 29 (2025), doi:10.1016/j.medengphy.2025.104420
Chloride Diffusion and Mechanical Performances of Geopolymer Concrete with Blended Precursor, Patrycja Duży, Izabela Hager, Marta Choińska-Colombel, Ouali Amiri, Concrete-Polymer Composites in Circular Economy, Vol. 61, pp. 220-229 (2025), doi:10.1007/978-3-031-72955-3_22
Low-carbon concretes: natural diffusion and migration in a non-steady-state regime, Gayelle Fahed, Stéphanie Bonnet, Anthony Soive, Fib Symposium, pp. 323-333, ISBN:[9782940643295] (2025)
Modelling Transition Between Fully and Partially Saturated Porous Media via a New Implicit Formulation of Interface Evolution, Julien Bomberault, Quentin Rousseau, Ngoc Son Nguyen, Giulio Sciarra, Transport in Porous Media, Vol. 152, number 011002, issue 10 (2025), doi:10.1007/s11242-025-02215-y
Effect of Diss and polypropylene fibers on the characteristics of self-compacting sand concrete: A comparative study, Borsali Besma, Ayed Kada, Mouli Mohamed, Leklou Nordine, MRS Advances, Vol. 10, issue 17, pp. 2072-2080 (2025), doi:10.1557/s43580-025-01374-w
NUMERICAL INVESTIGATION OF A PERMEABILITY-MICROSTRUCTURE RELATIONSHIP IN THE CONTEXT OF INTERNAL EROSION, M. El Shamieh, N. Nguyen, F. Bignonnet, R. Gelet, D. Marot, IOP Conference Series: Earth and Environmental Science, Iop Conference Series Earth and Environmental Science, Vol. 1480 (2025), doi:10.1088/1755-1315/1480/1/012031
SAGO PALM FIBERS AND GGBFS FOR SUSTAINABLE HIGH-TENSILE-STRENGTH SELF-COMPACTING CONCRETE, Lisa Oksri-Nelfia, Arya Raditya, Triastuti, Ananto Nugroho, Deprizon Syamsunur, Ouali Amiri, International Journal of Geomate, Vol. 28, issue 125, pp. 44-55 (2025), doi:10.21660/2025.125.4650
An Investigation of the Characteristics and Microstructure of Gold Tailing Powder Utilized as a Cement Substitute, Indah Saiful Fajarani, Lisa Oksri Nelfia, Julien Meret, Ouali Amiri, Deprizon Syamsunur, Engineering Technology and Applied Science Research, Vol. 15, issue 5, pp. 26351-26358 (2025), doi:10.48084/etasr.10513
A new ISO standard for the experimental characterization of in-plane permeability of fibrous reinforcements, D. May, S. G. Advani, M. Duhovic, A. Endruweit, E. Fauster, A. George, P. J. Liotier, C. Lira, S. V. Lomov, M. F. Pucci, S. Schmeer, D. Abliz, D. C. Berg, C. Binetruy, M. Bodaghi, S. Comas-Cardona, M. Etchells, Q. Govignon, A. Koorevaar, V. Michaud, C. H. Park, R. Schubnel, P. Sousa, R. Ravel, M. Rouhi, E. Syerko, R. Umer, M. Vollmer, A. Yong, Composites Part A Applied Science and Manufacturing, Vol. 190, number 108592 (2025), doi:10.1016/j.compositesa.2024.108592
The first European benchmark exercise on squeeze flow testing of high-performance carbon fibre sheet moulding compounds, Connie Qian, Miro Duhovic, Dominic Schommer, Florian Gortner, Andreas Gebhard, Thomas Neumeyer, Marcel Olma, Louis Schreyer, Luise Kärger, Martin Hohberg, Hao Yuan, Anna Julia Imbsweiler, Leah Senn Ramirez, Sepehr Simaafrookhteh, Jan Ivens, Stepan V. Lomov, Gerben Bieleman, Wouter Grouve, Francois Mahé, Christophe Binetruy, Andreas Kapshammer, Zoltan Major, Dmitry S. Ivanov, Jonathan P.H. Belnoue, Anatoly Koptelov, Jakub Jakimow, Yvonne Aitomaki, Dimitra Ramantani, Materials Research Proceedings, Vol. 54, pp. 676-685, ISBN:[9781644903599] (2025), doi:10.21741/9781644903599-73
Subcycling Strategy for Finite-Volume Updated-Lagrangian Methods Applied to Fluid–Structure Interaction, Teddy Chantrait, Nicolas Chevaugeon, Stéphane Del Pino, Alexandre Gangloff, Emmanuel Labourasse, International Journal for Numerical Methods in Engineering, Vol. 126, number 345, issue 11 (2025), doi:10.1002/nme.70051
Spatio-temporal evolution and engineering implications of biofouling communities on floating wind turbines mooring lines, Antoine Dubois, Franck Schoefs, Bruno Cognie, Marine Reynaud, Thomas Soulard, Justine Dumay, Estuarine Coastal and Shelf Science, Vol. 320, number 109302, issue 5 (2025), doi:10.1016/j.ecss.2025.109302
Multi-parameter analysis of marine growth effects on mooring lines for floating offshore wind, Katherine Coughlan, Franck Schoefs, Krish Thiagarajan, Sanjay Arwade, Ocean Engineering, Vol. 340, number 122390, issue 1 (2025), doi:10.1016/j.oceaneng.2025.122390
ADDED MASS AND DRAG COEFFICIENTS OF BIOFOULED MOORING CHAINS IN WAVES, Krish Thiagarajan, Franck Schoefs, Nazila Emamdoost, Maduka Maduka, Jean Christophe Thomas, Proceedings of ASME 2025 6th International Offshore Wind Technical Conference Iowtc 2025, ISBN:[9780791889282] (2025), doi:10.1115/IOWTC2025-165256
Influence of mussel growth on mooring line drag coefficients in uniform currents, N. Emamdoost, F. Schoefs, M. Maduka, J. C. Thomas, K. Thiagarajan, Innovations in Renewable Energies Offshore Proceedings of the 6th International Conference on Renewable Energies Offshore Renew 2024, pp. 401-410, ISBN:[9781032905570] (2025), doi:10.1201/9781003558859-44
REVIEW OF SOFT FOULING IMPACT ON FLOATING OFFSHORE WIND TURBINES: RESEARCH GAPS IN LONG ALGAE MORPHOLOGICAL AND MECHANICAL CHARACTERISTICS, Nazila Emamdoost, Franck Schoefs, Krish Thiagarajan, Justin Dumay, Jean Christophe Thomas, Proceedings of ASME 2025 6th International Offshore Wind Technical Conference Iowtc 2025, ISBN:[9780791889282] (2025), doi:10.1115/IOWTC2025-165242
Modélisation de l'hydratation des ciments avec laitiers : réactions chimiques et cinétique d'hydratation, Jack Atallah, Academic Journal of Civil Engineering, Vol. 43, pp. 999-1009, Academic Journal of Civil Engineering (2025), doi:10.26168/ajce.43.1.84
Identification inverse de champs de température en pointe de fissure, Camille Crusson, Julien Berthe, Bastien Lammens, Gerald Portemont, Rian Seghir, Julien Réthoré, 26e Congrès Français de Mécanique (2025)
Etudes semi-analytiques et numériques d'une plaque rigide unidimensionnelle soumise à une explosion sous-marine avec prise en compte de la cavitation, Antonin Guerineau, Ye Pyae Sone Oo, Aboulghit El Malki Alaoui, Michel Arrigoni, Hervé Le Sourne, 26e Congrès Français de Mécanique (2025)
Robust estimation of diffusion parameters and measurement error for total chlorides using data from the DéCoF-Ré project to develop a Bayesian penetration model, Cédric-Hermann Kidiofinninpan Fofana, Romain Clerc, Franck Schoefs, Athanas Konin, Veronique Bouteiller, Les Journées de Fiabilité des Matériaux et Structures (2025)
Coupled reactive transport and poromechanics modelling of external sulfate attack in cementitious materials, Syed Yasir Alam, Anthony Soive, Ahmed Loukili, 12th International Conference on Fracture Mechanics for Concrete and Concrete Structures, IA-FraMCoS (2025), doi:10.21012/FC12.1346
Comprehensive Numerical Hydrodynamic Analysis of Submarine in a Straight Course Simulation Using Wall-Resolved RANS Models, Noh Zainal Abidin, Frederic Grondin, Pol Muller, Jean-François Sigrist, 26ème Congrès Français de Mécanique (2025)
Approche couplée nanoindentation-imagerie pour la quantification des phases et la prédiction du fluage des matériaux cimentaires, Imane Bekrine, Academic Journal of Civil Engineering (2025), doi:10.26168/ajce.42.1.72
Effect of Printing Temperature on the Microstructure and Tensile Properties of Polylactic Acid–Magnetic Iron Composites Manufactured by Material Extrusion, Meriem Bouchetara, Sofiane Belhabib, Alessia Melelli, Jonathan Perrin, Timm Weitkamp, Ahmed Koubaa, Mahfoud Tahlaiti, Mustapha Nouri, Sofiane Guessasma, Polymers, Vol. 17, number 2485, issue 18 (2025), doi:10.3390/polym17182485
Evaluating Resonance Mitigation for Monopile-Supported Offshore Wind Turbine Considering Soil-Foundation-Structure Interaction Using a Passive Energy Dissipation Device, Marcus Vinícius Girão de Morais, Philip Alkhoury, Mourad Aït-Ahmed, Abdul-Hamid Soubra, Proceedings of ISFOG 2025 (2025), doi:10.53243/ISFOG2025-575
AI-CFD Based Analysis for Propellant Management in Cryogenic Tanks, Y Le Guennec, Y Blacodon, S Tollis, T Defoort, José Vicente Aguado, Domenico Borzacchiello, 1st international Symposium on AI and Fluid Mechanics (2025)
Slip localization and grain boundary sliding analysis at sub-voxel resolution using phase contrast tomography, Pedro Damas Resende, Damien Texier, J. Genée, Malo Jullien, Henry Proudhon, Julien Réthoré, Didier Bardel, Wolfgang Ludwig, Tomography of Materials and Structures, Vol. 8, number 100060, issue 6610 (2025), doi:10.1016/j.tmater.2025.100060
Multiscale Analysis of the Mechanical Impact of LPBF Defects with Coarse Graining, Lilou Gautier, Didier Bardel, Xiaodong Liu, Mathilde Chevreuil, Julien Réthoré, 12th European Solid Mechanics Conference (ESMC 2025) (2025)
Fast geometric factor approximation to evaluate the electrical resistivity of concrete and reinforced concrete specimens using neural network models, Wael Karam, Yann Lecieux, Mathilde Chevreuil, Franck Schoefs, MATEC Web of Conferences, Concrete Solutions 2025 – 9th International Conference on Concrete Repair, Durability & Technology, Vol. 409, pp. 12001 (2025), doi:10.1051/matecconf/202540912001
Assessment of Hybrid RANS-LES and WALE Formulations for Wake and Resistance Prediction of the BB2 Submarine, Noh Abidin, Frederic Grondin, Pol Muller, Jean-François Sigrist, Proceedings of the 27th Numerical Towing Tank Symposium (NuTTS 2025) (2025)
Survey of concrete blocks submitted to artificial sea water tide during one year by electrical resistivity tomography, Géraldine Villain, Marie-Ange Eid, Sergio Palma Lopes, Stéphanie Bonnet, e-Journal of Nondestructive Testing, Vol. 30, issue 10 (2025), doi:10.58286/31674
Nanoscale creep modelling on calcium-silicate-hydrates using molecular dynamics simulation, Sela Hoeun, Frédéric Grondin, Ahmed Loukili, 43èmes Rencontres Universitaires du Génie Civil (RUGC) de l'AUGC, Vol. 43, pp. 924-933 (2025), doi:10.26168/ajce.43.1.77
Impact Of Carbon Black Content In Relationships Between Mechanical Properties And Crosslinking Of Filled Polychloroprene During Oxidative Aging, Hugo Madeira, Pierre Yves Le Gac, Maelenn Le Gall, Erwan Verron, Rubber Chemistry and Technology, Vol. 98, issue 1, pp. 46-61 (2025), doi:10.5254/rct.24.00026
Comparaison d'algorithmes de résolution de contact frottant sur des problèmes à solutions multiples, V Rey, Congrès Français de Mécanique (2025)
Can we reliably predict in-plane and out-of-plane permeability of a reference permeable medium? Insights from an international modeling benchmark using a standard reference porous medium, Masoud Bodaghi, Mostafa Nikzad, Cristian Lira, Andreas Endruweit, A Albayraktar, I Afgan, S Cassola, Christophe Binetruy, D Droste, M Duhovic, M Faizan, S Guessesma, L Kärger, S Kperegueni, A Leitão, S Lomov, S Mokli, P Mulye, D May, M Matveev, J Machado, C Park, M Rouhi, S Schlegel, T Schmidt, M Shakoor, Elena Syerko, E Sozer, R Umer, D Weitze, 24th International Conference on Composite Materials (ICCM24) (2025)
Analysis of the long-term hygroscopic ageing behavior of bio-composite sandwich structures with acoustic emission, Yuan Wu, Pascal Casari, Sylvain Fréour, Jamal Fajoui, Marianne Perrin, Marie-Laetitia Pastor, Xiaojing Gong, JNC 2025 - Les Journées Nationales sur les Composites (2025)
Thermo-Chemo-Mechanical Modeling of Thermosetting Composites : Study of Cure-Induced Deformations, Sourour Traouli, Rima Sfar Zbed, Mael Péron, Vincent Sobotka, Steven Le Corre, Jago Pridie, Journées Nationales sur les Composites 2025 (2025)
Modélisation chimio-mécanique de pâtes de ciment exposées aux attaques sulfatiques externes, Anthony Soive, Syed Yasir Alam, Ahmed Loukili, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil, allo, Rencontres Universitaires de Génie Civil (2025), doi:10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65, , 10.26168/ajce.43.1.65,
Deep learning simulations of self-heating using physics-informed neural networks: determination of fatigue limits for laminated composites, Laurent Gornet, Journées Nationales sur les Composites 2025 (2025)
Influence de la variable histoire sur les prédictions d'un modèle d'endommagement par champ de phase, Abdelmalek Barki, Jihed Zghal, Laurent Gallimard, Isabelle Bruant, Nicolas Chevaugeon, 26e Congrès Français de Mécanique (2025)
Montage d'essai pour les matériaux architecturés 2D à maille triangulaire, Marc Louis Maurice François, 26e Congrès Français de Mécanique (2025)
Développement d'une méthode de création et d'optimisation de trajectoires de mors pour le formage par étirage de produits minces, Basile Allard, Tudor Balan, Cyrille Baudouin, Valentine Legrand, Adrien Leygue, 26e Congrès Français de Mécanique (CFM 2025) (2025)
Comparing traditional surrogate modelling and neural fields for vehicle crash simulation data, Thibaut Defoort, Yves Le Guennec, Jose Vicente Aguado, Domenico Borzacchiello, SIA Simulation numérique 2025 (2025)
Characterization and Treatment Outcomes of Malignant Histiocytoses in a Retrospective Series of 141 Cases in France, Camille Bigenwald, Damien Roos-Weil, Arnaud Pages, Zofia Hélias-Rodzewicz, Christiane Copie-Bergman, Marzieh Nashvi, Pierre Khneisser, Marie-Cécile Parrens, Alexandra Traverse-Glehen, Isabelle Ray-Coquard, Loic Ysebaert, Tony Marchand, Jérome Razanamahery, Frédéric Charlotte, Antoine Neel, Gandhi Damaj, Jeremie Dion, Eve Marie Nazal-Traissac, Stéphanie Tardy, Geraldine Salmeron, Hélène Monjanel, Ahmed Iobaih, Sebastien Heritier, Julien Haroche, Jean Donadieu, Jean-Francois Emile, Blood Advances, Vol. 9, issue 10, pp. 2530-2541 (2025), doi:10.1182/bloodadvances.2024015208
Fonctionnalisation passive de pièces composites fabriquées par procédé TFP, Peng Yu, Nahiene Hamila, Jessy Simon, Sébastien Comas-Cardona, Christophe Binetruy, Journées Nationales sur les Composites 2025 (2025)
Sensitivity-based optimization of test configurations for parameters identification using full field measurements, Ninon Serrurier, Pascal Bouda, Sylvia Feld-Payet, Thomas Fourest, Julien Réthoré, 2025 SEM Annual Conference (2025)
Monitoring de l'imbibition du béton par capteurs noyés de résistivité pour l'estimation de la perméabilité, Marie-Ange Eid, Academic Journal of Civil Engineering (2025), doi:10.26168/ajce.43.1.113
Study of the plasticity of pure titanium and cobalt at temperature through in situ thermomechanical testing using X-ray diffraction and backscattered electrons, Inès Addi, Pierre-Antoine Dubos, Baptiste Girault, David Gloaguen, 26ème Congrès Français de Mécanique (2025)
A Comprehensive Review on Thermal and Hygro/Hydrothermal Aging of Plant Fiber Composites: Properties, Degradation Mechanisms, and Service Life Prediction, Amine Fourari, Mouad Chakkour, Mohamed Ould Moussa, Ismail Khay, Tarak Ben Zineb, Polymer Composites, Vol. 46, issue 16, pp. 14576-14620 (2025), doi:10.1002/pc.30110
Special issue JTCM on “continuous-discontinuous long fiber-reinforced polymer composite structures”, Thomas Böhlke, Christophe Binetruy, Frank Henning, Andrew Hrymak, Luise Kärger, Loredana Kehrer, Kay Weidenmann, Mehrdad Ghasemi-Nejhad, Journal of Thermoplastic Composite Materials (2025), doi:10.1177/08927057251341503
Vers des matériaux cimentaires multifonctionnels pour les planchers chauffants intégrés : impact de l’incorporation de noir de carbone, Imane Bekrine, Syed Yasir Alam, Nouveaux Matériaux et Durabilité 2025, Vol. 43 (2025), doi:10.26168/ajce.43.5.26
Influence of overload on the propagation of 3D short fatigue cracks, Lucas Sanciet-Munier, Nathalie Limodin, Jean-Yves Buffiere, Jean-François Witz, Julien Réthoré, Michel Coret, Ghita Filali, Yves Gaillard, Michel Fleuriot, Andrew King, Joël Lachambre, Arnaud Weck, 12th European Solid Mechanics Conference (2025)
Heat transfer simulation of stationary shoulder friction stir welding on an AA6061 aluminium alloy, Tanguy Fajwisiewicz, Matthieu Guillo, Guillaume Racineux, Jean-Christophe Roux, Éric Feulvarch, FSWP2025 Conference on Friction Stir Welding and Processing (2025)
Effect of sand liquefaction on the first natural frequency of a monopile-supported offshore wind turbine using a non-linear three-dimensional finite element model, Kassem Dib, Philip Alkhoury, Abdul-Hamid Soubra, Fouad Kaddah, Proceedings of ISFOG 2025 (2025), doi:10.53243/ISFOG2025-497
Pile anchors of floating offshore wind farms subjected to lateral cyclic loadings in different directions, Ashraf Ahmed, Philip Alkhoury, Zheng Li, Tanguy Coquio, Abdul-Hamid Soubra, Proceedings of ISFOG 2025 (2025), doi:10.53243/ISFOG2025-535
A comparison of MCOL and CEL approach for ship-FOWT collision assessment, Palaniswamy Chandrasekaran Abhemanyu, Ye Pyae Sone Oo, Hervé Le Sourne, Patrick Kaeding, Thomas Lindemann, 10th International Conference on Marine Structures (MARSTRUCT 2025), pp. 235-243, CRC Press (2025), doi:10.1201/9781003642411-29
Actes des RUGC 2025 - Volume 3 : Prix Jeunes Chercheuses, Jeunes Chercheurs (René Houpert), Emmanuel Rozière, Franck Taillandier, Rencontres Universitaires de Génie Civil 2025 (2025)
Structure and Thermal Properties of Bio-Based Blends from Functionalized Lignin for Additive Manufacturing, Meriem Bouchetara, Mustapha Nouri, Ghinwa El Hajj Sleiman, Mahfoud Tahlaiti, Ahmed Koubaa, Sofiane Belhabib, Simon Claudie, Clément Dumont, Mathieu Sauthier, Sofiane Guessasma, Polymer Blends & Eurofillers 2025 (2025)
Coupling and decoupling multi-physical phenomena during the forming of reinforced organic matrix composite materials, Mael Péron, Journées Nationales sur les Composites 2025 (2025)
Caractérisation de la décohésion dynamique des matériaux composites à matrice organique (CMO), Bastien Lammens, Gérald Portemont, Julien Berthe, Rian Seghir, Julien Réthoré, 26ème Congrès Français de Mécanique (2025)
CHARACTERIZATION OF CYCLIC HYGROTHERMAL SWELLING AND SHRINKAGE BEHAVIOR OF BALSA WOOD AND GFRP-BALSA SANDWICH STRUCTURES, Yuan Wu, Pascal Casari, Jamal Fajoui, Sylvain Fréour, Mouna Bouziane, 14th International Conference on Sandwich Structures (ICSS-14) (2025)
Etude multi-échelle du fluage des liants cimentaires bas carbone par indentation instrumentée, Imane Bekrine, Benoit Hilloulin, Ahmed Loukili, 23e Journées Scientifiques du (RF)²B 2025 (2025)
Occurence of mechanosorption phenomena during the processing of a plant fiber composite, Benjamin Gaud, Mael Péron, Amandine Célino, Sylvain Freour, Journées Nationales sur les Composites 2025 (2025)
Modélisation numérique des glissements inter-plis dans un renfort cousu (NCF) à l'échelle macroscopique, Jessy Simon, Nahiene Hamila, Journées Nationales sur les Composites 2025 (2025)
Study of the staggering method applied to pass-to-pass gaps in automated fibre placement (AFP), Félix Thébault, Alexandre Clement, Sylvain Freour, Gwénolé Le Moal, Pascal Casari, Journées Nationales sur les Composites 2025 (2025)
A unified controller for a floating wind turbine evolving in Region II and Region III: preliminary experimental results, Ehsan Aslmostafa, Mohamed Hamida, Yuri Shtessel, Salah Laghrouche, Franck Plestan, American Control Conference, pp. 1494-1499, IEEE (2025), doi:10.23919/ACC63710.2025.11107947
Open Review of "Comparison between 2D and 3D fiber-matrix debonding simulation for inverse identification of interface fracture properties", Hugo Girard, Aurélien Doitrand, Behrad Koohbor, Renaud Rinaldi, Nathalie Godin, Jérôme Bikard, Julien Réthoré (2025)
Nouvelle stratégie de stéréo-corrélation d'images numériques pour l'étude de la fragmentation dynamique., Fabien Daheron, Julien Réthoré, Rian Seghir, Aurihona Wolff, Gilles Besnard, 26e Congrès Français de Mécanique (2025)
Durability and Efficiency of Energy Piles: A Multi-Year Investigation Under Real Operating Conditions, Roxana Vasilescu, Panagiotis Kotronis, Christophe Dano, Anne-Laure Fauchille, Philippe Gotteland, 3rd International Conference on Energy Geotechnics 2025 (2025)
Dynamic responses of monopile-supported DTU 10MW offshore wind turbine subjected to wind, wave and seismic loads, Kassem Dib, Philip Alkhoury, Abdul-Hamid Soubra, Fouad Kaddah, 5th International Symposium on Frontiers in Offshore Geotechnics (ISFOG2025), Vol. Proceedings of ISFOG 2025 (2025), doi:10.53243/ISFOG2025-495
Automated in situ thermomechanical analysis of hexagonal materials under EBSD, Inès Addi, Pierre-Antoine Dubos, Baptiste Girault, Samuel Branchu, David Gloaguen, Thermec'2025 (2025)
Comment l'Analyse du Cycle de Vie (ACV) évalue et contribue à réduire les impacts environnementaux des parcs éoliens en mer ?, Sybill Henry, Stéphanie Bonnet, Juan Creus, Mike Nunes, Laurélène Rincé, Patrick Rousseaux, Joanna Schlesinger-Martinat (2025)
Comportement mécanique des sols fins en lien avec leur microstructure initiale, Mengyu Ma, Fares Bennai, Mahdia Hattab, Pierre-Yves Hicher, François Nicot, 26e Congrès Français de Mécanique (2025)
Benchmark Activity for micro-Structure Image-processing for Composites: Voids in 2D, Lewis Griffin, A. Amirian, Christophe Binetruy, G. Broggi, B. Caglar, C. Dransfeld, S. Gomarasca, W. Grouve, R. Hartley, James Kratz, Arthur Lévy, V. Maes, M. Mehdikhani, Nikzad Motamedi, M. Pitto, Y. Schaefer, Elena Syerko, Dmytro Vasiukov, Rehana Yasin Kalhoro, O. Yuksel, Image-Based Simulation for Industry (IBSim-4i) (2025)
Global DIC, Florent Mathieu, Benoît Blaysat, Michel Coret, François Hild, Pascal Lava, Jean-Charles Passieux, Jean-Noël Périé, Julien Réthoré, Nicolas Swiergiel, Zixiang Tong, Jin Yang, pp. 133-148 (2025), doi:10.32720/idics/gpg.ed2
Hydro-mechanical analysis of particle migration in fractures with CFD-DEM, Tuo Wang, Pei Wang, Zhen yu Yin, Farid Laouafa, Pierre Yves Hicher, Engineering Geology, Vol. 335, number 107557 (2024), doi:10.1016/j.enggeo.2024.107557
Process monitoring by deep neural networks in directed energy deposition: CNN-based detection, segmentation, and statistical analysis of melt pools, Reza Asadi, Antoine Queguineur, Olli Wiikinkoski, Hossein Mokhtarian, Tommi Aihkisalo, Alejandro Revuelta, Iñigo Flores Ituarte, Robotics and Computer Integrated Manufacturing, Vol. 87, number 102710, issue 4 (2024), doi:10.1016/j.rcim.2023.102710
Decision Tree Regression vs. Gradient Boosting Regressor Models for the Prediction of Hygroscopic Properties of Borassus Fruit Fiber, Assia Aboubakar Mahamat, Moussa Mahamat Boukar, Nordine Leklou, Amandine Celino, Ifeyinwa Ijeoma Obianyo, Numfor Linda Bih, Tido Tiwa Stanislas, Holmer Savastanos, Applied Sciences Switzerland, Vol. 14, number 7540, issue 17 (2024), doi:10.3390/app14177540
Incorporating mitigation strategies in machine learning for landslide susceptibility prediction, Hai Min Lyu, Zhen Yu Yin, Pierre Yves Hicher, Farid Laouafa, Geoscience Frontiers, Vol. 15, number 101869, issue 5 (2024), doi:10.1016/j.gsf.2024.101869
Influence of clay fraction on the shear behavior of an interface between sand-clay mixture and concrete, Kexin Yin, Anne Laure Fauchille, Roxana Vasilescu, Christophe Dano, Panagiotis Kotronis, Giulio Sciarra, Geomechanics for Energy and the Environment, Vol. 38, number 100543, issue 1 (2024), doi:10.1016/j.gete.2024.100543
An innovative 3D hydroxyapatite patient-specific implant for maxillofacial bone reconstruction: A case series of 13 patients, Simon Systermans, Elisabeth Cobraiville, Séverine Camby, Christophe Meyer, Aurélien Louvrier, Suen AN Lie, Thomas Schouman, Sergio Siciliano, Olivier Beckers, Vinciane Poulet, Nicolas Ullmann, Grégory Nolens, Vincent Biscaccianti, Jean Luc Nizet, Jean Yves Hascoët, Yves Gilon, Luciano Vidal, Journal of Cranio Maxillofacial Surgery, Vol. 52, issue 4, pp. 420-431 (2024), doi:10.1016/j.jcms.2024.02.026
Spatial characterization and simulation of new defects in corroded pipeline based on In-Line Inspections, Rafael Amaya-Gómez, Mauricio Sánchez-Silva, Felipe Muñoz, Franck Schoefs, Emilio Bastidas-Arteaga, Reliability Engineering and System Safety, Vol. 241, number 109697, issue 2 (2024), doi:10.1016/j.ress.2023.109697
Effect of water re-curing on the physico-mechanical and microstructural properties of self-compacting concrete reinforced with steel fibers after exposure to high temperatures, Farah Bouhafs, Mohammed Ezziane, Kada Ayed, Nordine Leklou, Mohamed Mouli, Construction and Building Materials, Vol. 413, number 134805, issue 23 (2024), doi:10.1016/j.conbuildmat.2023.134805
Methodology for complexity and cost comparison between subtractive and additive manufacturing processes, S. Touzé, M. Rauch, J. Y. Hascoët, Journal of Intelligent Manufacturing, Vol. 35, issue 2, pp. 555-574 (2024), doi:10.1007/s10845-022-02059-z
Machine learning-aided prediction of shrinkage in modern concrete: Focus on mix proportions and SCMs, Benoît Hilloulin, Rejoice Ummunakwe, Journal of Building Engineering, Vol. 98, number 111410 (2024), doi:10.1016/j.jobe.2024.111410
Effectiveness of rice husk ash-derived alkali activator in fresh, mechanical, and microstructure properties of geopolymer mortar at ambient temperature curing, Shaswat Kumar Das, Niranjan Behera, Sanjaya Kumar Patro, Syed Mohammed Mustakim, Yuya Suda, Nordine Leklou, Journal of Sustainable Cement Based Materials, Vol. 13, issue 2, pp. 213-221 (2024), doi:10.1080/21650373.2023.2262465
Experimental evaluation of interface adhesion of a flax fiber composite patch with epoxy and polyurethane adhesives for the reinforcement of steel structures, Mohamed Amine Tazi, Rosemere de Araujo Alves Lima, Enio Henrique Pires da Silva, Mouad Jebli, Sofia Teixeira De Freitas, Pascal Casari, Silvio de Barros, International Journal of Adhesion and Adhesives, Vol. 129, number 103559, issue 3 (2024), doi:10.1016/j.ijadhadh.2023.103559
A self-supervised learning framework based on physics-informed and convolutional neural networks to identify local anisotropic permeability tensor from textiles 2D images for filling pattern prediction, John M. Hanna, José V. Aguado, Sebastien Comas-Cardona, Yves Le Guennec, Domenico Borzacchiello, Composites Part A Applied Science and Manufacturing, Vol. 179, number 108019, issue 3 (2024), doi:10.1016/j.compositesa.2024.108019
An Overview of Phase Change Materials and Their Applications in Pavement, Kinga Korniejenko, Marek Nykiel, Marta Choinska, Assel Jexembayeva, Marat Konkanov, Lyazat Aruova, Energies, Vol. 17, number 2292, issue 10 (2024), doi:10.3390/en17102292
Investigation of residual stresses and modeling of tensile deformation in wire-arc additive manufactured 6061 aluminum alloy: Diffraction and elastoplastic self-consistent model, Gautier Doumenc, Bruno Courant, Laurent Couturier, Pascal Paillard, Baptiste Girault, Thilo Pirling, Sandra Cabeza, M. J. Moya, David Gloaguen, Materials Science and Engineering A, Vol. 890, number 145891 (2024), doi:10.1016/j.msea.2023.145891
Graph-based representation of history-dependent material response in the Data-Driven Computational Mechanics framework, Héloïse Dandin, Adrien Leygue, Laurent Stainier, Computer Methods in Applied Mechanics and Engineering, Vol. 419, number 116694, issue 1 (2024), doi:10.1016/j.cma.2023.116694
Data-driven micromorphic mechanics for materials with strain localization, Jacinto Ulloa, Laurent Stainier, Michael Ortiz, José E. Andrade, Computer Methods in Applied Mechanics and Engineering, Vol. 429, number 117180, issue 3 (2024), doi:10.1016/j.cma.2024.117180
Data-driven methods for computational mechanics: A fair comparison between neural networks based and model-free approaches, Martin Zlatić, Felipe Rocha, Laurent Stainier, Marko Čanađija, Computer Methods in Applied Mechanics and Engineering, Vol. 431, number 117289, issue 138 (2024), doi:10.1016/j.cma.2024.117289
Sensitivity analysis using Physics-informed neural networks, John M. Hanna, José V. Aguado, Sebastien Comas-Cardona, Ramzi Askri, Domenico Borzacchiello, Engineering Applications of Artificial Intelligence, Vol. 135, number 108764, issue 3 (2024), doi:10.1016/j.engappai.2024.108764
Prediction of fatigue lifetime by the strain energy density for filled polychloroprene during thermo-oxidative ageing, H. Madeira, P. Y. Le Gac, M. Le Gall, E. Verron, International Journal of Fatigue, Vol. 178, number 108023 (2024), doi:10.1016/j.ijfatigue.2023.108023
Gas permeability and gamma ray shielding properties of concrete for nuclear applications, Daria Jóźwiak-Niedźwiedzka, Marta Choinska Colombel, Aneta Brachaczek, Mariusz Dąbrowski, Jakub Ośko, Michał Kuć, Nuclear Engineering and Design, Vol. 429, number 113616, issue 1 (2024), doi:10.1016/j.nucengdes.2024.113616
Signatures of fatigue crack growth from acoustic emission repeaters, Théotime de la Selle, Julien Réthoré, Jérôme Weiss, Joël Lachambre, Stéphanie Deschanel, Engineering Fracture Mechanics, Vol. 309, number 110388, issue 54 (2024), doi:10.1016/j.engfracmech.2024.110388
Assessment of hygrothermal performance of raw earth envelope at overall building scale, Yassine Elias Belarbi, Mohammed Yacine Ferroukhi, Nabil Issaadi, Philippe Poullain, Stéphanie Bonnet, Energy and Buildings, Vol. 310, number 114119 (2024), doi:10.1016/j.enbuild.2024.114119
Effect of accelerated carbonation on electrical resistivity and microstructure of clinker-slag-limestone cement based concretes, Imane Elkhaldi, Emmanuel Roziere, Géraldine Villain, Ahmed Loukili, Materials and Structures Materiaux Et Constructions, Vol. 57, number 2, issue 1 (2024), doi:10.1617/s11527-023-02290-x
Raman identification of CaCO3 polymorphs in concrete prepared with carbonated recycled concrete aggregates, M. Marchetti, G. Gouadec, M. Offroy, M. Haouchine, A. Djerbi, O. Omikrine-Metalssi, J. M. Torrenti, J. M. Mechling, G. Simon, P. Turcry, P. Barthelemy, O. Amiri, Materials and Structures Materiaux Et Constructions, Vol. 57, number 952, issue 2 (2024), doi:10.1617/s11527-024-02296-z
Thermal, mechanical and microstructural properties of geopolymer mortars derived from ceramic sanitary-ware wastes: Pathway to net zero emission, Abir Rezzoug, Kada Ayed, Nordine Leklou, Ceramics International, Vol. 50, number 50, pp. 55535-55545 (2024), doi:10.1016/j.ceramint.2024.10.414
Coupled thermo-hydro-chemical modeling of accelerated carbonation of cement-based materials: Application to CO2 uptake, Farah Kaddah, Ouali Amiri, Philippe Turcry, Harifidy Ranaivomanana, Emmanuel Roziere, Journal of Building Engineering, Vol. 93, number 109819, issue 6 (2024), doi:10.1016/j.jobe.2024.109819
An overview of interphase’s formation and participation on water diffusion in epoxy/metal bonded assemblies, Romain Grangeat, Marion Girard, Silvio de Barros, Frédéric Jacquemin, Journal of Adhesion, Vol. 100, issue 3, pp. 157-177 (2024), doi:10.1080/00218464.2023.2206960
Influence of the curing stress effect on the stiffness degradation curve of a silt stabilized with lime and cement, Lucile Pigeot, Nathalie Dufour, Hélène Calissano, Fabienne Dermenonville, Anthony Soive, Engineering Geology, Vol. 337, number 107574, issue 1 (2024), doi:10.1016/j.enggeo.2024.107574
Contribution to a better understanding of long-term hydration, structuration and mechanical properties of slag based cementitious materials: Experimental and modeling approaches, Mohamad Ali Ahmad, Harifidy Ranaivomanana, Stéphanie Bonnet, Paul Buttin, Valérie L'Hostis, Construction and Building Materials, Vol. 411, number 134664, issue 5 (2024), doi:10.1016/j.conbuildmat.2023.134664
A yarn-scale woven fabric model including significant slippage formulated within the Arbitrary Lagrangian Eulerian framework, J. Simon, N. Hamila, S. Comas-Cardona, C. Binetruy, Computer Methods in Applied Mechanics and Engineering, Vol. 420, number 116741, issue 1 (2024), doi:10.1016/j.cma.2023.116741
Added value of monitoring for the maintenance of a reinforced concrete wharf with spatial variability of chloride content: a practical implementation, Franck Schoefs, Mestapha Oumouni, Dominique Follut, Yann Lecieux, Virginie Gaillard, Cyril Lupi, Dominique Leduc, Structure and Infrastructure Engineering, Vol. 20, issue 1, pp. 56-68 (2024), doi:10.1080/15732479.2022.2077767
Passivity-based control of underactuated mechanical systems with Coulomb friction: Application to earthquake prevention, Diego Gutiérrez-Oribio, Ioannis Stefanou, Franck Plestan, Automatica, Vol. 165, number 111661, issue 5 (2024), doi:10.1016/j.automatica.2024.111661
Investigation of fracture source mechanisms through full-field imaging and acoustic emission, Raphael Heinzmann, Rian Seghir, Syed Yasir Alam, Julien Réthoré, Engineering Fracture Mechanics, Vol. 295, number 109744, issue 4 (2024), doi:10.1016/j.engfracmech.2023.109744
Correlated high throughput nanoindentation mapping and microstructural characterization of wire and arc additively manufactured 2205 duplex stainless steel, Antoine Queguineur, Rahul Cherukuri, Aloshious Lambai, Manasi Sameer Dalal, Pasi Peura, Gaurav Mohanty, Jean Yves Hascoët, Iñigo Flores Ituarte, Welding in the World, Vol. 68, number 581, pp. 2247-2257 (2024), doi:10.1007/s40194-024-01795-5
Effect of curing temperature on the early and later ages behaviour of Metakaolin blended cement mortars: hydration heat and compressive strength, K. Abdelli, W. Deboucha, N. Leklou, U. Johnson Alengaram, M. N. Oudjit, Australian Journal of Civil Engineering, Vol. 22, issue 1, pp. 94-107 (2024), doi:10.1080/14488353.2022.2131949
Data-driven surrogate modelling of residual stresses in Laser Powder-Bed Fusion, L. Lestandi, J. C. Wong, G. Y. Dong, S. J. Kuehsamy, J. Mikula, G. Vastola, U. Kizhakkinan, C. S. Ford, D. W. Rosen, M. H. Dao, M. H. Jhon, International Journal of Computer Integrated Manufacturing, Vol. 37, issue 6, pp. 685-707 (2024), doi:10.1080/0951192X.2023.2257628
Experimental Methodology to Identify Optimal Friction Stir Welding Parameters Based on Temperature Measurement, Moura Abboud, Laurent Dubourg, Guillaume Racineux, Olivier Kerbrat, Journal of Manufacturing and Materials Processing, Vol. 8, number 137, issue 4 (2024), doi:10.3390/jmmp8040137
Micromechanics and microstructure based machine learning approach: Unveiling the role of porosity and hydrated phases on the tensile behaviour of cement pastes, Jinane Murr, Syed Yasir Alam, Frédéric Grondin, Engineering Fracture Mechanics, Vol. 312, number 110613, issue 5 (2024), doi:10.1016/j.engfracmech.2024.110613
A Hydraulic Gradient and Stress-Controlled Erosion Apparatus for Assessing Soil Internal Erosion, Didier Marot, Bikram Oli, Fateh Bendahmane, Rachel Gelet, Philippe Leroy, Geotechnical Testing Journal, Vol. 47, issue 6 (2024), doi:10.1520/GTJ20230454
OPEN-LOOP CONTROL SYSTEM FOR HIGH PRECISION EXTRUSION-BASED BIOPRINTING THROUGH MACHINE LEARNING MODELLING, Javier Arduengo, Nicolas Hascoet, Francisco Chinesta, Jean Yves Hascoet, Journal of Machine Engineering, Vol. 24, issue 1, pp. 103-117 (2024), doi:10.36897/jme/186044
Local and global sensitivity analysis of a coupled heat and moisture transfers model: effect of the variability of cob material properties, Junior Tchiotsop, Stéphanie Bonnet, Tristan Senga Kiessé, Nabil Issaadi, Philippe Poullain, Heat and Mass Transfer Waerme Und Stoffuebertragung, Vol. 60, issue 1, pp. 67-87 (2024), doi:10.1007/s00231-023-03409-0
An ecologically aware modification of the Morison's equation for long term marine growth effects, Cian Warby, Frederic Dias, Franck Schoefs, Vikram Pakrashi, Mechanics Research Communications, Vol. 139, number 104293, issue 5 (2024), doi:10.1016/j.mechrescom.2024.104293
Experimental characterization of material strain-rate dependence based on full-field Data-Driven Identification, Adrien Vinel, Rian Seghir, Julien Berthe, Gérald Portemont, Julien Réthoré, International Journal of Impact Engineering, Vol. 194, number 105083, issue 2023 (2024), doi:10.1016/j.ijimpeng.2024.105083
Preliminary Results of Interlaboratory Tests on Hygrothermal Properties of CEB, Thibaut Colinart, Fionn Mcgregor, Myriam Duc, Nabil Issaadi, Lauredan Le Guen, Yacine Ferroukhi, Abderrahim Boudenne, Second RILEM International Conference on Earthen Construction, Vol. 52, pp. 458-465 (2024), doi:10.1007/978-3-031-62690-6_47
Simulation of the fiber orientation through a finite element approach to solve the Fokker–Planck equation, Nazih Assaad Al Ayoubi, Hugues Digonnet, Luisa Silva, Christophe Binetruy, Thierry Renault, Sebastien Comas-Cardona, Journal of Non Newtonian Fluid Mechanics, Vol. 331, number 105284, issue 6 (2024), doi:10.1016/j.jnnfm.2024.105284
Towards solar iron metallurgy: Complete hydrogen reduction of iron ore pellets under a concentrated light flux, B. Sanglard, B. Huneau, J. Carrey, S. Lachaize, Solar Energy, Vol. 284, number 113072, issue 9 (2024), doi:10.1016/j.solener.2024.113072
A Machine Learning Led Investigation Predicting the Thermos-mechanical Properties of Novel Waste-based Composite in Construction, Assia Aboubakar Mahamat, Moussa Mahamat Boukar, Nordine Leklou, Ifeyinwa Ijeoma Obianyo, Tido Tiwa Stanislas, Numfor Linda Bih, Olugbenga Ayeni, Nurudeen Mahmud Ibrahim, Holmer Savastano, Waste and Biomass Valorization, Vol. 15, number e09406, issue 5, pp. 5445-5461 (2024), doi:10.1007/s12649-024-02538-9
Experimental, analytical and numerical study of reinforced concrete beams impacted by deformable bodies at low velocities, Lucas Márquez, Hervé Le Sourne, Philippe Rigo, International Journal of Impact Engineering, Vol. 192, number 105027, issue 8 (2024), doi:10.1016/j.ijimpeng.2024.105027
Moisture Effects on Acoustic Emission Characteristics and Damage Mechanisms of Balsa Wood Core Composite Sandwich under 4-Point Bending, Yuan Wu, Marianne Perrin, Marie Laetitia Pastor, Pascal Casari, Xiaojing Gong, Materials, Vol. 17, number 1044, issue 5 (2024), doi:10.3390/ma17051044
A Novel Finite Element-Based Method for Predicting the Permeability of Heterogeneous and Anisotropic Porous Microstructures, Paris Mulye, Elena Syerko, Christophe Binetruy, Adrien Leygue, Materials, Vol. 17, number 2873, issue 12 (2024), doi:10.3390/ma17122873
How Does Customized Cutting Guide Design Affect Accuracy and Ergonomics in Pelvic Tumor Resection? A Study in Cadavers, Henri Fragnaud, Vincent Biscaccianti, Jean Yves Hascoët, Antoine Hamel, Mathieu Rostam, François Lataste, Yoann Varenne, Luciano Vidal, Vincent Crenn, Clinical Orthopaedics and Related Research, Vol. 482, issue 6, pp. 994-1002 (2024), doi:10.1097/CORR.0000000000003000
Marine durability of carbon black-filled polychloroprene: Effect of seawater ageing on network, tensile and fatigue properties, H. Madeira, P. Y. Le Gac, M. Le Gall, E. Verron, Polymer Degradation and Stability, Vol. 230, number 111045, issue 3 (2024), doi:10.1016/j.polymdegradstab.2024.111045
For better comprehension of mussel's thermal characteristics and their thermal effect on dynamic submarine electrical cables, Ziad Maksassi, Ahmed Ould EL Moctar, Bertrand Garnier, Franck Schoefs, Emmanuel Schaeffer, Applied Ocean Research, Vol. 144, number 103900, issue 1 (2024), doi:10.1016/j.apor.2024.103900
Experimental Investigation on the Effects of Mineral Water Composition on the Leaching of Cement-Based Materials, Alienor Pouyanne, Sonia Boudache, Benoît Hilloulin, Ahmed Loukili, Emmanuel Roziere, Materials, Vol. 17, number 1548, issue 7 (2024), doi:10.3390/ma17071548
INVESTIGATION OF MECHANICAL CHARACTERISTICS OF LIGHTWEIGHT CONCRETE USING ENVIRONMENTALLY FRIENDLY LIGHTWEIGHT AGGREGATES, Lisa Oksri-Nelfia, Nazifa Sekarningtyas, Agung Sumarno, Astri Rinanti, Ouali Amiri, Indonesian Journal of Urban and Environmental Technology, Vol. 7, pp. 216-231 (2024), doi:10.25105/urbanenvirotech.v7i2.19715
Insights of using control theory for minimizing induced seismicity in underground reservoirs, Diego Gutiérrez-Oribio, Ioannis Stefanou, Geomechanics for Energy and the Environment, Vol. 39, number 100570, issue 6 (2024), doi:10.1016/j.gete.2024.100570
Do multiphysics processes lead to mesh independent analyses?, Eleni Gerolymatou, Alexandros Stathas, Ioannis Stefanou, International Journal of Mechanical Sciences, Vol. 274, number 109265, issue 17 (2024), doi:10.1016/j.ijmecsci.2024.109265
An analytical model for the long term slag hydration kinetics in slag blended cement established from a large experimental database, Jack Atallah, François Bignonnet, Harifidy Ranaivomanana, Stéphanie Bonnet, Construction and Building Materials, Vol. 448, number 138160 (2024), doi:10.1016/j.conbuildmat.2024.138160
Swelling-driven mechanics of partially cross-linked polymer gels: Steady state solutions, Paola Nardinocchi, Siddhartha H. Ommi, Giulio Sciarra, International Journal of Engineering Science, Vol. 202, number 104101, issue 11 (2024), doi:10.1016/j.ijengsci.2024.104101
Evaluating the effect of slag variability on the properties of slag-based cement grouts, Faten Souayfan, Emmanuel Roziere, Manon Michaut, Christophe Justino, Case Studies in Construction Materials, Vol. 21, number e04070, issue 8 (2024), doi:10.1016/j.cscm.2024.e04070
Influence of Plastic Anisotropy and Strain path on strain-induced Phase Transformation of Cobalt, Pierre Antoine Dubos, Jamal Fajoui, Baptiste Girault, David Gloaguen, Metals and Materials International, Vol. 30, issue 1, pp. 1-12 (2024), doi:10.1007/s12540-023-01490-y
A simplified method to assess the elastoplastic response of standalone tubular Floating Offshore Wind Turbine supports subjected to ship impact, G. Vandegar, Y. P.Sone Oo, I. Ladeira, H. Le Sourne, S. Echeverry, Advances in the Collision and Grounding of Ships and Offshore Structures Proceedings of the 9th International Conference on Collision and Grounding of Ships and Offshore Structures Iccgs 2023, pp. 447-454, ISBN:[9781032611303] (2024), doi:10.1201/9781003462170-54
PREPRINT Machine Learning for the Sensitivity Analysis of a Model of the Cellular Uptake of Nanoparticles for the Treatment of Cancer, Sarah Iaquinta, Shahram Khazaie, Samer Albanna, Sylvain Fréour, Frédéric Jacquemin, International Journal for Numerical Methods in Biomedical Engineering, Vol. 40, number 2825 (2024), doi:10.1002/cnm.3878
Chloride Diffusion in Geopolymers Containing Phase Change Materials, Bouha El Moustapha, Stéphanie Bonnet, Abdelhafid Khelidj, American Concrete Institute ACI Special Publication, Vol. SP-362, pp. 763-773, ISBN:[9781641952507] (2024), doi:10.14359/51742007
Aging properties of a vegetable-based polyurethane foam under high relative humidity and different temperatures, Enio Henrique Pires Da Silva, Silvio De Barros, Pascal Casari, Marcelo Leite Ribeiro, Polymer Engineering and Science, Vol. 64, number 61, issue 4, pp. 2778-2794 (2024), doi:10.1002/pen.26725
A new protocol to evaluate the behaviour and durability of marine structures, Marinelle El-Khoury, Emmanuel Rozière, Frédéric Grondin, Mathias Marcel, Rachid Cortas, Fadi Hage Chehade, Ocean Engineering, Vol. 302, number 117579 (2024), doi:10.1016/j.oceaneng.2024.117579
Directional saturation of a strongly bimodal pore size distribution carbon interlock fabric: Measurement and multiphase flow modeling, Gabriela Gambarini, Gabriel Valdés-Alonzo, Christophe Binetruy, Sébastien Comas-Cardona, Elena Syerko, Marc Waris, Composites Part B Engineering, Vol. 281, number 111532, issue 3 (2024), doi:10.1016/j.compositesb.2024.111532
Modeling of Chloride Spatial Variability in a Reinforced Concrete Wharf from Onsite Measurements, Romain Clerc, Franck Schoefs, Mestapha Oumouni, Inès Othmen, Stéphanie Bonnet, ASCE ASME Journal of Risk and Uncertainty in Engineering Systems Part A Civil Engineering, Vol. 10, number 1, issue 3 (2024), doi:10.1061/AJRUA6.RUENG-1214
Determining singular and non-singular Williams’ expansion terms from full-field measurements: Consideration of structural effects on fracture behavior, Bastien Lammens, Gérald Portemont, Julien Berthe, Rian Seghir, Julien Réthoré, Theoretical and Applied Fracture Mechanics, Vol. 130, number 104304, issue 15 (2024), doi:10.1016/j.tafmec.2024.104304
A thermomechanical investigation of textured Magnesium in an effort to validate crystal plasticity simulations, Necdet Ali Ozdür, Sefer Can Erman, Rian Seghir, Laurent Stainier, C. Can Aydiner, Procedia Structural Integrity, Procedia Structural Integrity, Vol. 61, pp. 277-284 (2024), doi:10.1016/j.prostr.2024.06.035
Physico-mechanical and thermal properties of vibrating and self-compacting sand concrete based on recycled aggregate from concrete, Faisal Abdelrahman Hashem Saleh, Nordine Leklou, Kada Ayed, Construction and Building Materials, Vol. 429, number 136321 (2024), doi:10.1016/j.conbuildmat.2024.136321
Comprehensive Characteristics of High-Performance Concrete with Nickel Slag as Fine and Coarse Aggregate, Lisa Oksri Nelfia, Ananda Bima Nurul Haq, Ananto Nugroho, Astri Rinanti, Bambang Endro Yuwono, Deprizon Syamsunur, Yohans Sunarno, Ouali Amiri, International Journal of Technology, Vol. 15, number 1613, issue 6, pp. 1613-1631 (2024), doi:10.14716/ijtech.v15i6.7184
Multi-objective Optimization-Driven Design: Generative Design Approach for Manufacturing of a Train Bogie, Amirmohammad Daareyni, Antoine Queguineur, Hossein Mokhtarian, Reza Asadi, Iñigo Flores Ituarte, Flexible Automation and Intelligent Manufacturing: Manufacturing Innovation and Preparedness for the Changing World Order, pp. 48-55, ISBN:[9783031744846] (2024), doi:10.1007/978-3-031-74485-3_6
ADER discontinuous Galerkin Material Point Method, Alaa Lakiss, Thomas Heuzé, Mikhael Tannous, Laurent Stainier, International Journal for Numerical Methods in Engineering, Vol. 125, number 477, issue 1 (2024), doi:10.1002/nme.7365
Design of Alkali-Activated Materials and Geopolymer for Deep Soilmixing: Interactions with Model Soils, Faten Souayfan, Emmanuel Roziere, Michael Paris, Dimitri Deneele, Ahmed Loukili, Christophe Justino, Materials, Vol. 17, number 3783, issue 15 (2024), doi:10.3390/ma17153783
Surface calibration of electromagnetic properties to simultaneously consider water and chloride contents in concrete both with and without slag, Mohamad Khodor El Achrafi, Géraldine Villain, Stéphanie Bonnet, Construction and Building Materials, Vol. 417, number 135176, issue 4 (2024), doi:10.1016/j.conbuildmat.2024.135176
3D failure envelope of rigid inclusion reinforced foundations, Ramon Alcala-Ochoa, Zheng Li, Panagiotis Kotronis, Giulio Sciarra, Acta Geotechnica, Vol. 19, number 995, issue 1, pp. 6973-6992 (2024), doi:10.1007/s11440-024-02309-9
Classification of whispering gallery modes for cladded systems, Corentin Guigot, Dominique Leduc, Yann Lecieux, Optics and Laser Technology, Vol. 174, number 110572, issue 2 (2024), doi:10.1016/j.optlastec.2024.110572
Toughening effects of out-of-crack-path architected zones, Julie Triclot, Thomas Corre, Anthony Gravouil, Véronique Lazarus, International Journal of Fracture, Vol. 248, number 350, issue 11, pp. 237-255 (2024), doi:10.1007/s10704-024-00811-5
Phase transformations in cold-rolled 304L stainless steel by dilatometry, Mokded Bachani, Abdelali Hayoune, Jamal Fajoui, Pierre Antoine Dubos, Bulletin of Materials Science, Vol. 47, number 2078, issue 2 (2024), doi:10.1007/s12034-024-03163-x
Path differences between quasistatic and fatigue cracks in anisotropic media, Xinyuan Zhai, Thomas Corre, Ataollah Mesgarnejad, Alain Karma, Véronique Lazarus, Physical Review E, Vol. 110, issue 6 (2024), doi:10.1103/PhysRevE.110.L063001
Sustainable Construction through Tradition: Inventory of Cob Buildings in the Guérande Peninsula (France), Philippe Poullain, Marta Miranda-Santos, Alison Hilton, Erwan Hamard, Corentin Mouraud, Heritage, Vol. 7, issue 9, pp. 4768-4789 (2024), doi:10.3390/heritage7090226
An Ecologically Consistent Model of Growth for Hard-Bodied Marine Organisms, Cian Warby, Frederic Dias, Franck Schoefs, Vikram Pakrashi, Journal of Marine Science and Engineering, Vol. 12, number 2067, issue 11 (2024), doi:10.3390/jmse12112067
Probabilistic modeling of chloride diffusion in repaired reinforced concrete structures, Quynh Chau Truong, Charbel Pierre El Soueidy, Emilio Bastidas-Arteaga, ISBN:[9780443134715, 9780443134708] (2024), doi:10.1016/B978-0-443-13470-8.00008-3
Fracture behavior of brittle particulate composites consisting of a glass matrix and glass or ceramic particles with elastic property mismatch, Tanguy Lacondemine, Julien Moriceau, Theany To, Patrick Houizot, Fabrice Célarié, Dusan Galusek, Jozef Kraxner, Marion Vandenhende, Gaëlle Delaizir, Raphael Langlois, Julien Réthoré, Jérôme Adrien, Eric Maire, Tanguy Rouxel, Materialia, Vol. 38, number 102278, issue 10 (2024), doi:10.1016/j.mtla.2024.102278
A generalized Timoshenko beam with embedded rotation discontinuity coupled with a 3D macroelement to assess the vulnerability of reinforced concrete frame structures, Androniki Anna Doulgeroglou, Panagiotis Kotronis, Giulio Sciarra, Catherine Bouillon, Finite Elements in Analysis and Design, Vol. 242, number 104234, issue 4 (2024), doi:10.1016/j.finel.2024.104234
Building with Compacted Earth Blocks on Kerkennah Island: A Sustainable Approach, Houcem Trabelsi, Ines Garsellaoui, Souhir Ellouze, Abdelmonem Masmoudi, Stéphanie Bonnet, 4th fib International Conference on Concrete Sustainability (ICCS2024), Vol. 574, pp. 591-598, ISBN:[9783031807237] (2024), doi:10.1007/978-3-031-80724-4_72
Introduction to Reinforcement Learning with Applications in Geomechanics, Alexandros Stathas, Diego Gutiérrez-Oribio, Ioannis Stefanou, ISBN:[9781789451931, 9781394325665] (2024), doi:10.1002/9781394325665.ch4
Contribution to Adjustment of Partial Safety Factors for RC Water Tank Design, Karima Bouzelha, Hocine Hammoum, Amar Aliche, Younes Aoues, Ouali Amiri, Structural Engineering International, Vol. 34, pp. 404-413 (2024), doi:10.1080/10168664.2024.2318320
An implicit consideration of fluid flow in the calculation of drying shrinkage of porous materials: Case of saturated concrete in low humidity environment, Yuliang Zou, Mazen Saad, Frédéric Grondin, Syed Yasir Alam, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 48, issue 2, pp. 496-516 (2024), doi:10.1002/nag.3647
Mechanical and Thermal Characterisation of Compressed Earth Blocks Made of Termite Mound Soil (Macrotermes Sp.) Stabilised with Corn Starch Gel, Berthia Malonga, Philippe Poullain, Fateh Bendahmane, Stéphanie Bonnet, Nabil Issaadi, Louis Ahouet, Second RILEM International Conference on Earthen Construction, Vol. 52, pp. 122-131 (2024), doi:10.1007/978-3-031-62690-6_13
Functionally Graded Beams: A Parametric Study and Eco-design Methodology, Salma Es-Satte, Syed Yasir Alam, Jean Michel Torrenti, Ahmed Loukili, Fib Symposium, pp. 825-832, ISBN:[9782940643240] (2024)
Preface, Ioannis Stefanou, Félix Darve, ISBN:[9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451924, 9781394325634], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634], [9781789451931, 9781394325665], [9781789451924, 9781394325634] (2024)
Reliability Analysis of the Slope Stability of Homogeneous Earth Dam under Seismic Loading, Lynda Belazouz, Karima Bouzelha, Hocine Hammoum, Ouali Amiri, Nacim Khelil, Periodica Polytechnica Civil Engineering, Vol. 68, issue 1, pp. 107-121 (2024), doi:10.3311/PPci.22537
IMPACT OF A VARIATION IN WIRE FEED SPEED ON DEPOSITS FROM THE WIRE ARC ADDITIVE MANUFACTURING (WAAM), Alizee Remy, Uzoma Vincent Nwankpa, Matthieu Rauch, Jean Yves Hascoet, Guillaume Ruckert, Journal of Machine Engineering, Vol. 24, issue 2, pp. 117-128 (2024), doi:10.36897/jme/188308
A numerical and experimental identification of crystallinity gradients in carbon fiber reinforced thermoplastic composites obtained by laser assisted filament winding, Anna Maria El Bayssari, Mael Péron, Anaïs Barasinski, Frédéric Jacquemin, Federica Daghia, Damien Guillon, Journal of Composite Materials, Vol. 58, issue 3, pp. 327-342 (2024), doi:10.1177/00219983231223568
Towards a rational approach for multi-axial experimental campaigns for rubberlike material, Benjamin Martin, Erwan Verron, Michel Coret, Nathan Selles, International Journal of Solids and Structures, Vol. 305, number 113060, issue 2 (2024), doi:10.1016/j.ijsolstr.2024.113060
Development of accelerated test methods by electromigration to assess the risk of internal sulfate attack in heat-cured mortar and concrete, Van Huong Nguyen, Nordine Leklou, Pierre Mounanga, Construction and Building Materials, Vol. 455, number 139185 (2024), doi:10.1016/j.conbuildmat.2024.139185
Raw dataset of compression tests on a vegetable oil-based polyurethane foam exposed to different ageing conditions, Enio H P Da Silva, Silvio De Barros, Pascal Casari, Marcelo L. Ribeiro, Data in Brief, Vol. 53, number 110199 (2024), doi:10.1016/j.dib.2024.110199
Exploring the filler morphology and temperature-dependent compressive response of glass-filled epoxy composites: Insights from experiments and viscoplastic simulations, Siddharth Kumar, Saurav Ranjan Sahay, Sarthak S. Singh, Patrick Rozycki, Polymer Composites, Vol. 45, number 31, issue 1, pp. 17001-17016 (2024), doi:10.1002/pc.28946
Material Flow Analysis: An Analytical Tool for Strategic Planning Towards a Zero-Waste Solution for End-of-Life Ballast Flows on a Track and Ballast Renewal Site (French Conventional Line), Olivier Giboulot, Emmanuel Lemelin, Christophe Binetruy, Nor Edine Abriak, Resources, Vol. 13, number 165, issue 12 (2024), doi:10.3390/resources13120165
Performance of Self-Compacting Concrete Containing Recycled Aggregates and Recycled Steel Fibers, Mahieddine Hichem, Ayed Kada, Belmokretar Karim, Azzaz Mohammed, Ezziane Mohammed, Nordine Leklou, International Journal of Engineering Research in Africa, Vol. 68, issue 3, pp. 51-66 (2024), doi:10.4028/p-GamA0s
VIBRATION AND FATIGUE MITIGATION OF A 5 MW BARGE-TYPE FLOATING OFFSHORE WIND TURBINE UNDER MISALIGNED WIND AND WAVE LOADINGS, Riad El hamoud, Philip Alkhoury, Mourad Aït-Ahmed, Abdul Hamid Soubra, Franck Schoefs, Rabih Dib, Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering OMAE, Vol. 7, ISBN:[9780791887851] (2024), doi:10.1115/OMAE2024-131914
Multi-scale characterization of carbon-fibre reinforced PEEK composites manufactured by laser-assisted tape placement, Noé Restif, Suzanne Laik, Mael Peron, Federica Daghia, Frederic Jacquemin, Materials Research Proceedings, Vol. 41, pp. 613-622, ISBN:[9781644903131] (2024), doi:10.21741/9781644903131-68
Estimation of the hygro-elastic behavior of polymeric composites during moisture aging considering hygromechanical coupling, Melissa Said, Amandine Célino, Georges Challita, Sylvain Fréour, Journal of Reinforced Plastics and Composites, Vol. 43, number 385, pp. 1189-1201 (2024), doi:10.1177/07316844231202101
Physics-Informed and Thermodynamics-Based Neural Networks, Filippo Masi, Ioannis Stefanou, ISBN:[9781789451931, 9781394325665] (2024), doi:10.1002/9781394325665.ch3
Rammed Earth Building: Contribution of Moisture Transfer on Indoor Comfort, Théo Poupard, Florent Fabre, Philippe Poullain, Nabil Issaadi, Stéphanie Bonnet, Second RILEM International Conference on Earthen Construction, Vol. 52, pp. 184-193 (2024), doi:10.1007/978-3-031-62690-6_19
Fundamentals of fluid flow in fibrous preforms, Christophe Binetruy, Sebastien Comas-Cardona, ISBN:[9780443215797, 9780443215780] (2024), doi:10.1016/B978-0-443-21578-0.00021-4
Machine Learning in Geomechanics 1: Overview of Machine Learning, Unsupervised Learning, Regression, Classification and Artificial Neural Networks, Ioannis Stefanou, Félix Darve, ISBN:[9781789451924, 9781394325634] (2024), doi:10.1002/9781394325634
Multiscale Mechanical Investigation of Ternary Binders Incorporating Calcined Clay and Slag, Imane Bekrine, Benoît Hilloulin, Ahmed Loukili, American Concrete Institute ACI Special Publication, Vol. SP-362, pp. 49-63, ISBN:[9781641952507] (2024), doi:10.14359/51740874
Development of a New Laboratory Earthquake Setup Featuring a Paraffin oil-based Gel as Analogue Material, Abdallah Aoude, Ioannis Stefanou, Jean François Semblat, Vito Rubino, Proceedings of the World Congress on New Technologies, ISBN:[9781990800450] (2024), doi:10.11159/icceia24.140
Machine Learning Models for Predicting Rheological Properties of Self-Consolidating Concrete (SCC), Abdelhamid Hafidi, Ilhame Harbouz, Benoit Hilloulin, Ahmed Loukili, Ammar Yahia, American Concrete Institute ACI Special Publication, Vol. SP-362, pp. 249-267, ISBN:[9781641952507] (2024), doi:10.14359/51740887
Overview of Machine Learning in Geomechanics, Ioannis Stefanou, ISBN:[9781789451924, 9781394325634] (2024), doi:10.1002/9781394325634.ch1
Advanced Chemical and Creep Modeling for Alkali-Aggregate Reaction in Concrete, Fernando A.N. Silva, Rodrigo F. Roma, Mohamed K. Bourbatache, Mahfoud Tahlaiti, João M.P.Q. Delgado, António C. Azevedo, Advanced Chemical and Creep Modeling for Alkali-Aggregate Reaction in Concrete, Vol. 28, pp. 1-84 (2024), doi:10.1007/978-3-031-53980-0
Reduced-scale Testing of Masonry Structures Subjected to Explosions, Ahmad Morsel, Filippo Masi, Ioannis Stefanou, Panagiotis Kotronis, Guillaume Racineux, Emmanuel Marché, World Congress on Civil Structural and Environmental Engineering, ISBN:[9781990800351] (2024), doi:10.11159/icsect24.132
Robust detection and characterization of a bifurcated bi-phasic interface propagating through a granular medium: physically and morphologically, Rana Al Nemer, Julien Réthoré, Giulio Sciarra, Experiments in Fluids, Vol. 65, number 83, issue 12 (2024), doi:10.1007/s00348-024-03919-5
Simplified Structural Assessment of Ship Collision Against a Semisubmersible Offshore Wind Floater, Salazar L. Priscilla, Gabriel Vandegar, Ye Pyae Sone Oo, Hervé Le Sourne, Philippe Rigo, Proceedings of the International Offshore and Polar Engineering Conference, Vol. 1, pp. 3385-3392, ISBN:[9781880653784] (2024)
Packing simulation and analysis applied to a thermoplastic composite recycling process, Awen Bruneau, François Mahé, Christophe Binetruy, Sébastien Comas-Cardona, Charlotte Landry, Nelly Durand, Frontiers in Materials, Vol. 11, number P07010 (2024), doi:10.3389/fmats.2024.1420014
The Comparison between Additively Manufactured and Molded 3D Scaffolds for Tissue Engineering Applications, Tijana Kavrakova, Luciano Vidal, Jean Yves Hascoet, International Journal of Material Forming, Vol. 17, number 226, issue 4 (2024), doi:10.1007/s12289-024-01841-z
Correction to: Microstructure evolution and fluid transport in porous media: a formal asymptotic expansions approach, Microstructure evolution and fluid transport in porous media: a formal asymptotic expansions approach, Quentin Rousseau, Giulio Sciarra, Archive of Applied Mechanics, Vol. 94, issue 11, 4, pp. 3293-3295 (2024), doi:10.1007/s00419-024-02704-4, 10.1007/s00419-024-02668-5
Data-Driven Identification unravels multiaxial mechanical response of a carbon-black filled elastomer during ageing, H. Madeira, L. Costecalde, M. Coret, A. Leygue, P. Y. Le Gac, M. Le Gall, E. Verron, Polymer Testing, Vol. 137, number 108521 (2024), doi:10.1016/j.polymertesting.2024.108521
Corrigendum to “Homogenized elasticity and domain of linear elasticity of 2D architectured materials” [Int. J. Solids Struct. 269 (2023) 112185] (International Journal of Solids and Structures (2023) 269, (S0020768323000823), (10.1016/j.ijsolstr.2023.112185)), V. Jeanneau, C. Combescure, M. L.M. François, International Journal of Solids and Structures, Vol. 292, number 112668 (2024), doi:10.1016/j.ijsolstr.2024.112668
Monitoring the temperature during thermoplastic composites assembling with fibre Bragg gratings: Validation using a rheometer, Adrian Korycki, Fabrice Carassus, Christan Garnier, France Chabert, Pascal Casari, Toufik Djilali, Materials Research Proceedings, Vol. 41, pp. 2678-2685, ISBN:[9781644903131] (2024), doi:10.21741/9781644903131-293
Analysis of the Influence of Recycled Sand Characteristics on the Rheological Properties of Self-Compacting Concrete by the Concrete Equivalent Mortar Method, Lara Saad, Mustapha Nouri, Mahfoud Tahlaiti, Abdelhafid Khelidj, Fib Symposium, pp. 1172-1180, ISBN:[9782940643257] (2024)
Machine Learning in Geomechanics 2: Data-Driven Modeling, Bayesian Inference, Physics- and Thermodynamics-based Artificial Neural Networks and Reinforcement Learning, Ioannis Stefanou, Félix Darve, ISBN:[9781789451931, 9781394325665] (2024), doi:10.1002/9781394325665
Fatigue behaviour of PVC foam core sandwich with GFRP faces: Simulation and experimental analysis, F. Alila, J. Fajoui, P. Casari, F. Jacquemin, M. Kchaou, Journal of Reinforced Plastics and Composites, Vol. 43, number 109963621879272, issue 6, pp. 1151-1164 (2024), doi:10.1177/07316844231201186
THE POTENTIAL OF ADDITIVE MANUFACTURING OF METAL COMPONENTS TO REDUCE ENVIRONMENTAL IMPACTS, Antoine Balidas, Olivier Kerbrat, Jean Yves Hascoet, Journal of Machine Engineering, Vol. 24, issue 2, pp. 94-104 (2024), doi:10.36897/jme/186988
A novel mathematical-based approach to predict the high-speed deformation behavior of cryodeformed materials with varying stacking fault energies, B. Srinivas, S. K. Panigrahi, G. Racineux, S. Marya, Materials Science and Engineering A, Vol. 902, number 146538 (2024), doi:10.1016/j.msea.2024.146538
X-Mesh: A new approach for the simulation of two-phase flow with sharp interface, Antoine Quiriny, Jonathan Lambrechts, Nicolas Moës, Jean François Remacle, Journal of Computational Physics, Vol. 501, number 112775 (2024), doi:10.1016/j.jcp.2024.112775
Extended finite element (XFEM) and thick level set (TLS) methods, Nicolas Moës, ISBN:[9781789450811, 9781394340507] (2024), doi:10.1002/9781394340507.ch6
Earth as a Construction Material for Sustainable 3D Printing: Rheological Aspect, Arpan Joshi, Philippe Poullain, Flávio Craveiro, Helena Bártolo, Progress in Digital and Physical Manufacturing, Vol. Part F3254, pp. 270-280 (2024), doi:10.1007/978-3-031-33890-8_24
Détermination des coefficients de diffusion dans les C-S-H par dynamique moléculaire, Tarek Ihaddadene, Jérôme Claverie, François Bignonnet, Ouali Amiri, Academic Journal of Civil Engineering, Vol. 42, pp. 404-413, Academic Journal of Civil Engineering (2024), doi:10.26168/ajce.42.1.36
A fast testing method for mode-II fatigue crack growth of CFRP adhesive joints, Yuan Wu, Pascal Casari, Silvio De Barros, Adiana Silva, JST Endommagement et rupture des structures composites, Emmanuel Baranger (2024)
Spatial Statistical “Blind-Approach” Results, Rafael Amaya-Gómez, Emilio Bastidas-Arteaga, Mauricio Sánchez-Silva, Franck Schoefs, Felipe Muñoz, pp. 209-240, Springer International Publishing (2024), doi:10.1007/978-3-031-43532-4_10
Identification and Modeling of New Defects, Rafael Amaya-Gómez, Emilio Bastidas-Arteaga, Mauricio Sánchez-Silva, Franck Schoefs, Felipe Muñoz, pp. 139-165, Springer International Publishing (2024), doi:10.1007/978-3-031-43532-4_7
Assessment of hydrodynamic characteristics and computational resources for submarine resistance analysis: A comparative study between CFD Codes with application of the BB2 Submarine, Noh Zainal Abidin, Frédéric Grondin, Pol Muller, Jean-François Sigrist, 26th Numerical Towing Tank Symposium (NuTTS 2024) (2024)
Evaluation of the microstructural and physico-mechanical characteristics of cement-stabilized termite hill soil for construction application, Assia Aboubakar Mahamat, Nordine Leklou, Ifeyinwa Ijeoma Obianyo, Tido Tiwa Stanislas, Olugbenga Ayeni, Numfor Linda Bih, Discover Civil Engineering, Vol. 1, number 1, issue 1 (2024), doi:10.1007/s44290-024-00058-y
Some experiences in mixed finite element formulations for (model-free) data-driven computational mechanics, Felipe Figueredo Rocha, Thiago Quinelato, Laurent Stainier, 16ème Colloque National en Calcul de Structures (CSMA 2024) (2024)
Articles du Prix René Houpert RUGC 2024, A. Khelidj, Jean Torrenti, Franck Taillandier, Rencontres Universitaires de Génie Civil 2024 (2024)
Méta-modélisation pour la fiabilité de structures en fatigue avec cumul non-linéaire du dommage, V Rey, C Freyssinet, F Schoefs, T Moro, 16ème Colloque National en Calcul de Structures (CSMA 2024) (2024)
Chemo-mechanical modeling of an OPC Cement paste exposed to external sulfate attack : an approach based on sulfates adsorbed in C-S-H and micromechanics, Anthony Soive, Syed Yasir Alam, Berrabeh Safae, Ahmed Loukili, 78TH RILEM annuel Week and Rilem Conference on sustainable materials and structures : Meeting the major challenges of the 21ST century - SMS 2024 (2024)
New Defects Between Inspections and Their Spatial Features, Rafael Amaya-Gómez, Emilio Bastidas-Arteaga, Mauricio Sánchez-Silva, Franck Schoefs, Felipe Muñoz, pp. 241-260, Springer International Publishing (2024), doi:10.1007/978-3-031-43532-4_11
Influence of curing under stress on the geotechnical behavior of a treated silty soil, Lucile Pigeot, Nathalie Dufour, Anthony Soive, Fabienne Dermenonville, Ahmed Loukili, Hélène Calissano, Laurent Batilliot, XVIII ECSMGE 2024 (2024), doi:10.1201/9781003431749-490
Chloride ingress into low carbon concrete in non-saturated condition: state of the art for on-site studies in the case of atmospheric tidal or splash area, Gayelle Fahed, Stéphanie Bonnet, Anthony Soive, 12th ACI/RILEM International Conference on Cementitious Materials and Alternative Binders for Sustainable Concrete (2024)
Evaluation of phase-field models for fracture with an explicit time integration scheme, Lamia Mersel, Pascal Bouda, Jérémy Germain, Julien Réthoré, 16ème Colloque National en Calcul de Structures (CSMA 2024) (2024)
Influence of the non-singular terms and the crack velocity on KIC of an epoxy resin, Bastien Lammens, Gérald Portemont, Julien Berthe, Rian Seghir, Julien Réthoré, Crack Paths 2024 (2024)
Caractérisation des GBRC : Méthode de détermination du CO2 piégé, Bogdan Cazagliu, Assia Djerbi, Sandrine Braymand, Julie Bertola, Virginie Vial, Bruno Huet, Jena Jeong, Johan Colin, Farah Kaddah, Ouali Amiri, Emmanuel Rozière, Philippe Turcry, pp. 11-15, IREX (2024)
R3XA: Toward a metadata standard for experimental (photo)mechanics datasets, Benoît Blaysat, Rébecca Bonnaire, Pascal Bouda, John-Eric Dufour, Sylvia Feld-Payet, Raphaël Fouque, Thomas Fourest, Thomas Jailin, Raphaël Langlois, J. Lachambre, Christophe Le Bourlot, Jean-Charles Passieux, Jean-Noël Périé, Julien Réthoré, Tonya Rose, Emmanuel Roubin, Théo Sentagne, Jean-Francois Witz, PhotoMechanics - International DIC Society 2024 Conference, pp. 47 (2024)
X-Mesh: La méthode des éléments finis avec des éléments dégénérés, Antoine Quiriny, Jonathan Lambrechts, Nicolas Moës, Jean-François Remacle, 16ème Colloque National en Calcul de Structures (CSMA 2024) (2024)
Review of "Non-local fatigue criterion based on standard deviation for notches and defects in Ti-6Al-4V", Natan Bodlet, Rémi Amargier, Yves Nadot, David Nowell, Julien Réthoré (2024)
Results and Discussion, Fernando A. N. Silva, Rodrigo F. Roma, Khaled Bourbatache, Mahfoud Tahlaiti, João M. P. Q. Delgado, António C. Azevedo, Advanced Chemical and Creep Modeling for Alkali-Aggregate Reaction in Concrete, pp. 71-81 (2024), doi:10.1007/978-3-031-53980-0_4
Tow-drop areas influence on composite laminates in Automated Fiber Placement, Félix Thébault, Alexandre Clément, Sylvain Fréour, Gwénolé Le Moal, Pascal Casari, Proceedings of the 21st European Conference on Composite Materials, Vol. 5, pp. 702, Nantes Université (2024), doi:10.60691/yj56-np80
Simulations pilotées par les données : quelle richesse pour la base de données matériau ?, Auriane Platzer, Adrien Leygue, Laurent Stainier, 16ème Colloque National en Calcul de Structures (CSMA 2024) (2024)
La régularisation Lipschitz pour la méthode Data Driven, Vasudevan Kamasamudram, Laurent Stainier, 16ème Colloque National en Calcul de Structures (CSMA 2024) (2024)
The Problem of Corrosion in Pipelines, Rafael Amaya-Gómez, Emilio Bastidas-Arteaga, Mauricio Sánchez-Silva, Franck Schoefs, Felipe Muñoz, pp. 41-64, Springer International Publishing (2024), doi:10.1007/978-3-031-43532-4_3
Case Study: Description and Analysis for Corrosion Main Features, Rafael Amaya-Gómez, Emilio Bastidas-Arteaga, Mauricio Sánchez-Silva, Franck Schoefs, Felipe Muñoz, pp. 187-207, Springer International Publishing (2024), doi:10.1007/978-3-031-43532-4_9
Modeling Reliability for Pipeline Corrosion, Rafael Amaya-Gómez, Emilio Bastidas-Arteaga, Mauricio Sánchez-Silva, Franck Schoefs, Felipe Muñoz, pp. 167-183, Springer International Publishing (2024), doi:10.1007/978-3-031-43532-4_8
High performance computing on images to study the impact of defects from LPBF additive manufacturing, Lilou Gautier, Didier Bardel, Xiaodong Liu, Mathilde Chevreuil, Julien Réthoré, 16ème Colloque National en Calcul de Structures (CSMA 2024) (2024)
Introduction, Fernando A. N. Silva, Rodrigo F. Roma, Khaled Bourbatache, Mahfoud Tahlaiti, João M. P. Q. Delgado, António C. Azevedo, Advanced Chemical and Creep Modeling for Alkali-Aggregate Reaction in Concrete, pp. 1-7 (2024), doi:10.1007/978-3-031-53980-0_1
Literature Review, Fernando A. N. Silva, Rodrigo F. Roma, Khaled Bourbatache, Mahfoud Tahlaiti, João M. P. Q. Delgado, António C. Azevedo, Advanced Chemical and Creep Modeling for Alkali-Aggregate Reaction in Concrete, pp. 9-50 (2024), doi:10.1007/978-3-031-53980-0_2
Atténuation des vibrations et de la fatigue d'une éolienne offshore flottante de type barge de 5 MW sous des charges de vent et de houle stochastiques, Riad El Hamoud, Philip Alkhoury, Mourad Aït-Ahmed, Abdul‐hamid Soubra, Franck Schoefs, Rabih Dib, Academic Journal of Civil Engineering (2024), doi:10.26168/ajce.42.1.30
La Méthode des Points Matériels (MPM) couplée avec Galerkin discontinu et l'intégrateur temporel ADER, Alaa Lakiss, Thomas Heuze, Mikhael Tannous, Laurent Stainier, 16ème Colloque National en Calcul de Structures (CSMA 2024) (2024)
Analysis of fractures propagating in silver fir (Abies Alba) using High-Resolution Full-Field Measurements, Raphaël Langlois, Arthur Bontemps, Rostand Moutou Pitti, Joseph Gril, Benoît Blaysat, SEM Annual Conference (2024)
Mechanical behavior of a treated silt subjected to curing stress., Lucile Pigeot, Nathalie Dufour, Hélène Calissano, Laurent Batilliot, Fabienne Dermenonville, Anthony Soive, 12èmes Journées Nationales de Géotechnique et de Géologie de l’Ingénieur (2024)
Etude de l'impact environnemental du procédé de fabrication Wire Arc Additive Manufacturing, Antoine Balidas, Jean Yves Hascoet, Olivier Kerbrat, Manufacturing'21 (2024)
Dynamics of moisture diffusion in epoxy resin : empirical and modeling insights into absorption-desorption behavior, Hamza Tarin, Jamal Fajoui, Julie Cocaud, Yuan Wu, Pascal Casari, Frédéric Jacquemin, Amandine Célino, Sylvain Fréour, Abdellah Arhaliass, Ahmed Rhallabi, Azzam El Maasri, Material Science, Vol. 2, pp. 714-721 (2024), doi:10.60691/yj56-np80
Spatial Statistical Analysis: A “Blind-Approach”, Rafael Amaya-Gómez, Emilio Bastidas-Arteaga, Mauricio Sánchez-Silva, Franck Schoefs, Felipe Muñoz, pp. 109-137, Springer International Publishing (2024), doi:10.1007/978-3-031-43532-4_6
Design of a new laboratory earthquake experiment, Abdallah Aoude, Ioannis Stefanou, Jean-François Semblat, Vito Rubino, EGU General Assembly 2024 (2024), doi:10.5194/egusphere-egu24-11981
New device for the study of suffusion under several stress states, Didier Marot, Bikram Oli, Rachel Gelet, Fateh Bendahmane, Revue française de Géotechnique, Vol. 53, number 3, issue 178 (2024), doi:10.1051/geotech/2024006
Accounting for the mechanical response of the cell membrane during the uptake of random nanoparticles, Sarah Iaquinta, Shahram Khazaie, Frédéric Jacquemin, Sylvain Fréour, Journal of Theoretical, Computational and Applied Mechanics (2024), doi:10.46298/jtcam.12489
Phase velocity statistics in random textured polycrystals, Shahram Khazaie, Ningyue Sheng, Mathilde Chevreuil, Sylvain Freour, 16ème Colloque National en Calcul de Structures (CSMA 2024) (2024)
Uncertainty in the Assessment of Corroded Pipelines, Rafael Amaya-Gómez, Emilio Bastidas-Arteaga, Mauricio Sánchez-Silva, Franck Schoefs, Felipe Muñoz, pp. 91-107, Springer International Publishing (2024), doi:10.1007/978-3-031-43532-4_5
How Corroded Pipelines Fail and How Are They Modeled?, Rafael Amaya-Gómez, Emilio Bastidas-Arteaga, Mauricio Sánchez-Silva, Franck Schoefs, Felipe Muñoz, pp. 65-88, Springer International Publishing (2024), doi:10.1007/978-3-031-43532-4_4
Onshore Pipeline Basic Context, Rafael Amaya-Gómez, Emilio Bastidas-Arteaga, Mauricio Sánchez-Silva, Franck Schoefs, Felipe Muñoz, pp. 17-40, Springer International Publishing (2024), doi:10.1007/978-3-031-43532-4_2
Co-allotropic transformation study by in situ automated testing : EBSD analysis, Pierre-Antoine Dubos, Inès Addi, Samuel Branchu, Baptiste Girault, David Gloaguen, 1ères journées du groupe des utilisateurs Gatan et Edax (Gate) (2024)
Modeling and experimental analysis of moisture diffusion behavior in bio-based balsa wood core composite sandwich, Yuan Wu, Jamal Fajoui, Pascal Casari, Sylvain Fréour, Marianne Perrin, Marie-Laetitia Pastor, Xiaojing Gong, Proceedings of the 21st European Conference on Composite Materials, Vol. 7, pp. 115, European Society for Composite Materials (ESCM) (2024), doi:10.60691/yj56-np80
AI‐Driven Approach for Sustainable Extraction of Earth's Subsurface Renewable Energy While Minimizing Seismic Activity, Diego Gutiérrez-Oribio, Alexandros Stathas, Ioannis Stefanou, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 60, number 503, issue 6 (2024), doi:10.1002/nag.3923
Review of "Mesh density and geodesic tortuosity in planar triangular tessellations devoted to fracture mechanics", Joffrey Lhonneur, Nawfal Blal, Yann Monerie, Jérémie Girardot, Mahmoud Shaqfa, Julien Réthoré (2024)
Modélisation numérique multi-échelle non linéaire d'un câble d'énergie, Lara Zeidan, Patrice Cartraud, Laurent Stainier, 16ème Colloque National en Calcul de Structures (CSMA 2024) (2024)
Sur les données mécaniques en viscoélasticité linéaire harmonique, Laurent Stainier, Hossein Salashoor, 16ème Colloque National en Calcul de Structures (CSMA 2024) (2024)
HPCrack : Un code massivement parallèle pour les simulations numériques des problèmes de rupture à partir d'images, Xiaodong Liu, Julien Réthoré, 16ème Colloque National en Calcul de Structures (CSMA 2024) (2024)
Simulation numérique d'écoulement de fluides à seuil avec la méthode X-Mesh, Vincent Degrooff, Jean-François Remacle, Nicolas Moës, 16ème Colloque National en Calcul de Structures (CSMA 2024) (2024)
Vers une Méthodologie d’Ecoconception des Poutres Multicouches en Béton, Salma Es-Satte, Syed Yasir Alam, Jean-Michel Torrenti, Ahmed Loukili, RUGC 2024 : 42èmes Rencontres Universitaires de Génie Civil de l'AUGC, Vol. 42, pp. 581-592 (2024), doi:10.26168/ajce.42.1.51
Spatial and Time-Dependent Reliability Assessment: Identification of Critical Segments, Rafael Amaya-Gómez, Emilio Bastidas-Arteaga, Mauricio Sánchez-Silva, Franck Schoefs, Felipe Muñoz, pp. 261-281, Springer International Publishing (2024), doi:10.1007/978-3-031-43532-4_12
Approche multi-échelle de caractérisation des propriétés de transfert en fonction de la morphologie des matériaux cimentaires, Mohamad Achour, Emmanuel Rozière, François Bignonnet, Ouali Amiri, Academic Journal of Civil Engineering, Vol. 42, pp. 370-379, Academic Journal of Civil Engineering (2024), doi:10.26168/ajce.42.1.33
Towards the optimization of the infusion process through numerical permeability analysis and simulation, Nihad Siddig, Paris Mulye, Yves Le Guennec, Philippe Le Bot, Damien Lecointe, Yvan Denis, Elena Syerko, Olivier Fouché, Christophe Binetruy, Proceedings of 21st European Conference on Composite Materials (ECCM-21), Nantes, France, Vol. 5 (2024)
Numerical investigation of a permeability-microstructure relationship in the context of internal erosion, Mohamed El Shamieh, François Bignonnet, Ngoc-Son Nguyen, Rachel Gelet, Didier Marot (2024)
Assimilation de données et réduction de modèle pour la surveillance d'une structure navale, Mathias Riou, Mathilde Chevreuil, Cédric Leblond, Dominique Leduc, Emilien Billaudeau, Cyril Lupi, 16ème Colloque National en Calcul de Structures (CSMA 2024) (2024)
Etude de l’effet de la pression de cure sur la microstructure d’un limon stabilisé à la chaux et au liant hydraulique par tomographie in situ à rayons X., Lucile Pigeot, Rencontres Universitaires de Génie Civil 2024 (2024), doi:10.26168/ajce.42.1.83
From the PEEK microstructure at welded interfaces to the mechanical properties of thermoplastic composites manufactured by a Laser-Assisted Tape Placement process, Noé Restif, Mael Péron, Suzanne Laik, Federica Daghia, Frédéric Jacquemin, Proceedings of the 21st European Conference on Composite Materials (2024)
Multiphysics modelling of Titanium alloy Ti-6Al-4V realised by Wire Arc Additive Manufacturing (WAAM), Alizée Remy, Matthieu Rauch, Jean Yves Hascoet, Guillaume Rückert, Manufacturing'21 (2024)
Vers une compréhension de la convergence de la méthode d'identification data-driven, Nour Hachem, Adrien Leygue, Laurent Stainier, 16ème Colloque National en Calcul de Structures (CSMA 2024) (2024)
Vers la caractérisation de comportement non-linéaire élastique anisotrope en grandes déformations par approche Data Driven, Annie Morch, Michel Coret, Adrien Leygue, Julien Réthoré, Pauline Lecomte-Grosbras, Jean-François Witz, 16ème Colloque National en Calcul de Structures (CSMA 2024) (2024)
Materials and Methods, Fernando A. N. Silva, Rodrigo F. Roma, Khaled Bourbatache, Mahfoud Tahlaiti, João M. P. Q. Delgado, António C. Azevedo, Advanced Chemical and Creep Modeling for Alkali-Aggregate Reaction in Concrete, pp. 51-70 (2024), doi:10.1007/978-3-031-53980-0_3
Algorithme prédicteur-correcteur pour la simulation de comportements élastoplastiques sans modèle de comportement, Héloïse Dandin, Adrien Leygue, Laurent Stainier, 16ème Colloque National en Calcul de Structures (CSMA 2024) (2024)
Open Review of “A review of the coupled criterion”, Aurélien Doitrand, Thomas Duminy, Hugo Girard, Xi Chen, Alberto Sapora, Julien Réthoré (2024)
Rheokinetics of thermosetting prepregs before gelation: an original device and experimental characterization procedure, Rima Sfar Zbed, Steven Le Corre, Vincent Sobotka, Mael Péron, 21st European Conference on Composite Materials (ECCM21) (2024)
Open Review of ``Accounting for the adaptation of cell membrane adhesion during the uptake of random nanoparticles'', Sarah Iaquinta, Shahram Khazaie, Sylvain Fréour, Frédéric Jacquemin, Anna Pandolfi (2024)
Recommendation of RILEM TC 256-SPF on fire spalling assessment during standardised fire resistance tests: complementary guidance and requirements, Pierre Pimienta, Robert Mcnamee, Fabienne Robert, Lars Boström, Shan-Shan Huang, Katarzyna Mróz, Colin Davie, Siyimane Mohaine, Maria Cruz Alonso, Lenka Bodnarova, Josipa Bosnjak, Stefano Dal Pont, Vinh Dao, Dorjan Dauti, Frank Dehn, Roberto Felicetti, Izabela Hager, Rudolf Hela, Tomaz Hozjan, Michael Juknat, Ulla-Maija Jumppanen, Johannes Kirnbauer, Jerneja Kolsek, Manfred Korzen, Hitesh Lakhani, Maxime Lion, Francesco Lo Monte, Cristian Maluk, Fekri Meftah, Md Jihad Miah, Alain Millard, Jean-Christophe Mindeguia, Bérénice Moreau, Yahia Msaad, Mitsuo Ozawa, Francesco Pesavento, Duc Toan Pham, Klaus Pistol, Ieuan Rickard, Joao Paulo Correia Rodrigues, Mohsen Roosefid, Martin Schneider, Umesh Kumar Sharma, Kosmas Sideris, Ludwig Stelzner, Benedikt Weber, Frank Weise, Cristian Maluk, Materials and structures, Vol. 57, issue 1 (2024), doi:10.1617/s11527-023-02248-z
Prediction of Permeability of Multi-Scale Anisotropic Porous Media by a Novel Software Suite 'PoroS', Elena Syerko, Paris D. Mulye, Christophe Binetruy, Adrien Leygue, Proceedings of the 16th Annual Meeting & Conference on Porous Media InterPore 2024, Qingdao, China (2024)
Microstructure evolution and fluid transport in porous media: a formal asymptotic expansions approach, Quentin Rousseau, Giulio Sciarra, Archive of Applied Mechanics, Vol. 94, number 235, issue 4, pp. 3253-3291 (2024), doi:10.1007/s00419-024-02668-5
Correction to: Microstructure evolution and fluid transport in porous media: a formal asymptotic expansions approach (Archive of Applied Mechanics, (2024), 94, 11, (3253-3291), 10.1007/s00419-024-02668-5), Quentin Rousseau, Giulio Sciarra, Archive of Applied Mechanics, Vol. 94, issue 11, pp. 3293-3295 (2024), doi:10.1007/s00419-024-02704-4
Micro-mechanical analysis of one-dimensional compression of clay with DEM, Pei Wang, Zhen Yu Yin, Pierre Yves Hicher, Yu Jun Cui, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 47, issue 15, pp. 2706-2724 (2023), doi:10.1002/nag.3597
Wire arc additive manufacturing of thin and thick walls made of duplex stainless steel, Antoine Queguineur, Reza Asadi, Marta Ostolaza, Emilie Hørdum Valente, Venkata Karthik Nadimpalli, Gaurav Mohanty, Jean Yves Hascoët, Iñigo Flores Ituarte, International Journal of Advanced Manufacturing Technology, Vol. 127, issue 1-2, pp. 381-400 (2023), doi:10.1007/s00170-023-11560-5
Evolution TANN and the identification of internal variables and evolution equations in solid mechanics, Filippo Masi, Ioannis Stefanou, Journal of the Mechanics and Physics of Solids, Vol. 174, number 105245, issue 9 (2023), doi:10.1016/j.jmps.2023.105245
Hydrodynamic effects of biofouling-induced surface roughness – Review and research gaps for shallow water offshore wind energy structures, Maduka Maduka, Franck Schoefs, Krish Thiagarajan, Alison Bates, Ocean Engineering, Vol. 272, number 113798 (2023), doi:10.1016/j.oceaneng.2023.113798
A computationally efficient finite element model for the analysis of the non-linear bending behaviour of a dynamic submarine power cable, Fabien Ménard, Patrice Cartraud, Marine Structures, Vol. 91, number 103465, issue 1 (2023), doi:10.1016/j.marstruc.2023.103465
Benchmark exercise on image-based permeability determination of engineering textiles: Microscale predictions, E. Syerko, T. Schmidt, D. May, C. Binetruy, S. G. Advani, S. Lomov, L. Silva, S. Abaimov, N. Aissa, I. Akhatov, M. Ali, N. Asiaban, G. Broggi, J. Bruchon, B. Caglar, H. Digonnet, J. Dittmann, S. Drapier, A. Endruweit, A. Guilloux, R. Kandinskii, A. Leygue, B. Mahato, P. Martínez-Lera, M. Matveev, V. Michaud, P. Middendorf, N. Moulin, L. Orgéas, C. H. Park, S. Rief, M. Rouhi, I. Sergeichev, M. Shakoor, O. Shishkina, Y. Swolfs, M. Tahani, R. Umer, K. Vanclooster, R. Vorobyev, Composites Part A Applied Science and Manufacturing, Vol. 167, number 107397, issue 4 (2023), doi:10.1016/j.compositesa.2022.107397
Interpretable machine learning model for autogenous shrinkage prediction of low-carbon cementitious materials, Benoît Hilloulin, Van Quan Tran, Construction and Building Materials, Vol. 396, number 132343, issue 2 (2023), doi:10.1016/j.conbuildmat.2023.132343
The selection and design of earthen materials for 3D printing, Yameng Ji, Philippe Poullain, Nordine Leklou, Construction and Building Materials, Vol. 404, number 133114, issue 3 (2023), doi:10.1016/j.conbuildmat.2023.133114
Hydration, mechanical and transfer properties of blended cement pastes and mortars prepared with recycled powder or limestone filler, Mahmoud Nacer eddine Hamdadou, François Bignonnet, Walid Deboucha, Harifidy Ranaivomanana, Nordine Leklou, Karima Arroudj, Journal of Building Engineering, Vol. 78, number 107541, issue 2 (2023), doi:10.1016/j.jobe.2023.107541
Complementary use of thermogravimetric analysis and oven to assess the composition and bound CO2 content of recycled concrete aggregates, Farah Kaddah, Emmanuel Roziere, Harifidy Ranaivomanana, Ouali Amiri, Developments in the Built Environment, Vol. 15, number 100184, issue 1 (2023), doi:10.1016/j.dibe.2023.100184
Increased transparency is needed for corporate science-based targets to be effective, Anders Bjørn, H. Damon Matthews, Maida Hadziosmanovic, Nicolas Desmoitier, Amr Addas, Shannon M. Lloyd, Nature Climate Change, Vol. 13, issue 8, pp. 756-759 (2023), doi:10.1038/s41558-023-01727-z
Microstructural and heat treatment analysis of 316L elaborated by SLM additive manufacturing process, Kaoutar Fri, Abdellah Laazizi, Mouad Bensada, Mohammed El Alami, Abdelmalek Ouannou, Iatimad Akhrif, Mostapha El Jai, Jamal Fajoui, International Journal of Advanced Manufacturing Technology, Vol. 124, issue 7-8, pp. 2289-2297 (2023), doi:10.1007/s00170-022-10622-4
Characterisation of damage mechanisms of GFRP-balsa sandwich under 4-point bending based on two-step clustering process in acoustic emission analysis, Yuan Wu, Marie Laetitia Pastor, Marianne Perrin, Pascal Casari, Xiaojing Gong, Composites Part B Engineering, Vol. 260, number 110774, issue 11 (2023), doi:10.1016/j.compositesb.2023.110774
Review of methods to assess the structural response of offshore wind turbines subjected to ship impacts, Icaro Ladeira, Lucas Márquez, Sara Echeverry, Hervé Le Sourne, Philippe Rigo, Ships and Offshore Structures, Vol. 18, issue 6, pp. 755-774 (2023), doi:10.1080/17445302.2022.2072583
Investigating the role played by portlandite and C-A-S-H in the degradation response of pozzolanic and slag cements to external sulphate attack, Sonia Boudache, Ahmed Loukili, Laurent Izoret, Emmanuel Rozière, Journal of Building Engineering, Vol. 67, number 106053, issue 1 (2023), doi:10.1016/j.jobe.2023.106053
Relationship between microstructure, and residual strain and stress in stainless steels in-situ alloyed by double-wire arc additive manufacturing (D-WAAM) process, Juliette Théodore, Laurent Couturier, Baptiste Girault, Sandra Cabeza, Thilo Pirling, Renaud Frapier, Grégoire Bazin, Bruno Courant, Materialia, Vol. 30, number 101850, issue No 5 (2023), doi:10.1016/j.mtla.2023.101850
An Overview of Micro- and Nano-Dispersion Additives for Asphalt and Bitumen for Road Construction, Kinga Korniejenko, Marek Nykiel, Marta Choinska, Assel Jexembayeva, Marat Konkanov, Lyazat Aruova, Buildings, Vol. 13, number 2948, issue 12 (2023), doi:10.3390/buildings13122948
Adaptive goal-oriented data sampling in Data-Driven Computational Mechanics, Anna Gorgogianni, Konstantinos Karapiperis, Laurent Stainier, Michael Ortiz, José E. Andrade, Computer Methods in Applied Mechanics and Engineering, Vol. 409, number 115949, issue 1 (2023), doi:10.1016/j.cma.2023.115949
Effects of microencapsulated phase change materials on chloride ion transport properties of geopolymers incorporating slag and, metakaolin, and cement-based mortars, Bouha El Moustapha, Stephanie Bonnet, Abdelhafid Khelidj, Nicolas Maranzana, Daniel Froelich, Abderahmane Khalifa, Isselmou Ahmedou Babah, Journal of Building Engineering, Vol. 74, number 106887, issue 9 (2023), doi:10.1016/j.jobe.2023.106887
A framework for coupled hydro-mechanical continuous modelling of gap-graded granular soils subjected to suffusion, Zhen Yu Yin, Jie Yang, Farid Laouafa, Pierre Yves Hicher, European Journal of Environmental and Civil Engineering, Vol. 27, issue 8, pp. 2678-2699 (2023), doi:10.1080/19648189.2020.1795724
Printing quality control of cement-based materials under flow and rest conditions, Ilhame Harbouz, Ammar Yahia, Emmanuel Roziere, Ahmed Loukili, Cement and Concrete Composites, Vol. 138, number 104965, issue 3 (2023), doi:10.1016/j.cemconcomp.2023.104965
Earthquake Control: An Emerging Application for Robust Control. Theory and Experimental Tests, Diego Gutiérrez-Oribio, Georgios Tzortzopoulos, Ioannis Stefanou, Franck Plestan, IEEE Transactions on Control Systems Technology, Vol. 31, issue 4, pp. 1747-1761 (2023), doi:10.1109/TCST.2023.3242431
Characterization and modelling of the dynamic stiffness of nylon mooring rope for floating wind turbines, H. Thuilliez, P. Davies, P. Cartraud, M. Feuvrie, T. Soulard, Ocean Engineering, Vol. 287, number 115866, issue 3 (2023), doi:10.1016/j.oceaneng.2023.115866
Effect of curing temperatures on hydration, mechanical and microstructural properties of metakaolin-blended cement mortars, Nordine Leklou, Shaswat Kumar Das, Journal of Thermal Analysis and Calorimetry, Vol. 148, issue 14, pp. 6747-6760 (2023), doi:10.1007/s10973-023-12228-8
Reuse of river sediments in pervious concrete: Towards an adaptation of concrete to the circular economy and climate change challenges, Hamza Beddaa, Junior Tchiotsop, Amor Ben Fraj, Ciryle Somé, Construction and Building Materials, Vol. 368, number 130443, issue 5 (2023), doi:10.1016/j.conbuildmat.2023.130443
A Discrete Elements Study of the Frictional Behavior of Fault Gouges, E. Papachristos, I. Stefanou, J. Sulem, Journal of Geophysical Research Solid Earth, Vol. 128, number 365, issue 1 (2023), doi:10.1029/2022JB025209
Automatic classification of biofouling images from offshore renewable energy structures using deep learning, Juliette Signor, Franck Schoefs, Nolwenn Quillien, Guillaume Damblans, Ocean Engineering, Vol. 288, number 115928, issue 5 (2023), doi:10.1016/j.oceaneng.2023.115928
Comprehensive study on the reactivity and mechanical properties of alkali-activated metakaolin at high H2O/Na2O ratios, Faten Souayfan, Emmanuel Roziere, Christophe Justino, Michaël Paris, Dimitri Deneele, Ahmed Loukili, Applied Clay Science, Vol. 231, number 106758 (2023), doi:10.1016/j.clay.2022.106758
Interpretable ensemble machine learning for the prediction of the expansion of cementitious materials under external sulfate attack, Benoît Hilloulin, Abdelhamid Hafidi, Sonia Boudache, Ahmed Loukili, Journal of Building Engineering, Vol. 80, number 107951 (2023), doi:10.1016/j.jobe.2023.107951
Assessment of the impact of climate change and flooding on bridges and surrounding area, Bassel Habeeb, Emilio Bastidas-Arteaga, Frontiers in Built Environment, Vol. 9, number 107564 (2023), doi:10.3389/fbuil.2023.1268304
Imaging concrete cracks using Nonlinear Coda Wave Interferometry (INCWI), Shilin Qu, Benoît Hilloulin, Jacqueline Saliba, Mehdi Sbartaï, Odile Abraham, Vincent Tournat, Construction and Building Materials, Vol. 391, number 131772, issue 5 (2023), doi:10.1016/j.conbuildmat.2023.131772
Electrical resistivity tomography results analyzed with two inversion methods to determine chloride profiles on BFS concrete having very high electrical resistivity, Mohamad Khodor EL Achrafi, Stéphanie Bonnet, Géraldine Villain, Construction and Building Materials, Vol. 407, number 133361 (2023), doi:10.1016/j.conbuildmat.2023.133361
DATA-DRIVEN IDENTIFICATION OF HYPERELASTIC MODELS BY MEASURING THE STRAIN ENERGY DENSITY FIELD, Léna Costecalde, Adrien Leygue, Michel Coret, Erwan Verron, Rubber Chemistry and Technology, Vol. 96, issue 4, pp. 443-454 (2023), doi:10.5254/rct-23.386903
Methods for assessing social impacts of policies in relation to absolute boundaries, Nicolas Desmoitier, Mathilde Kolenda, Karen Holm Olsen, Morten Walbech Ryberg, Environmental Impact Assessment Review, Vol. 101, number 107098, issue 22 (2023), doi:10.1016/j.eiar.2023.107098
Modelling two-dimensional chloride diffusion in repaired RC structures for sustainable maintenance management, Quynh Chau Truong, Charbel Pierre El Soueidy, Lara Hawchar, Yue Li, Emilio Bastidas-Arteaga, Structures, Vol. 51, issue 2, pp. 895-909 (2023), doi:10.1016/j.istruc.2023.03.088
The eXtreme Mesh deformation approach (X-MESH) for the Stefan phase change model, Nicolas Moës, Jean François Remacle, Jonathan Lambrechts, Benoît Lé, Nicolas Chevaugeon, Journal of Computational Physics, Vol. 477, number 111878, issue 12 (2023), doi:10.1016/j.jcp.2022.111878
Mechanical properties of cob-earth composites: Variability and focus on the different calculation methods of Young's modulus, Philippe Poullain, Mircea Barnaure, Stephanie Bonnet, Journal of Building Engineering, Vol. 72, number 106622, issue 2 (2023), doi:10.1016/j.jobe.2023.106622
Relevance of displacement softening model in discrete element method to investigate structural and grain size scaling effect, Ran Zhu, Syed Yasir Alam, Ahmed Loukili, Theoretical and Applied Fracture Mechanics, Vol. 123, number 103706, issue 6 (2023), doi:10.1016/j.tafmec.2022.103706
A simplified method to assess the elasto-plastic response of standalone tubular Offshore Wind Turbine supports subjected to ship impact, Icaro Ladeira, Sara Echeverry Jaramillo, Hervé Le Sourne, Ocean Engineering, Vol. 279, number 114313, issue 8 (2023), doi:10.1016/j.oceaneng.2023.114313
Sensitivity analysis of a physicochemical model of chloride ingress into real concrete structures subjected to long-term exposure to tidal cycles, Nicolas Reuge, François Bignonnet, Stéphanie Bonnet, Applied Ocean Research, Vol. 138, number 103622, issue 5 (2023), doi:10.1016/j.apor.2023.103622
Data-Driven games in computational mechanics, K. Weinberg, L. Stainier, S. Conti, M. Ortiz, Computer Methods in Applied Mechanics and Engineering, Vol. 417, number 116399, issue 2 (2023), doi:10.1016/j.cma.2023.116399
Assessing the relaxation of recycled aggregates concrete from free and restrained shrinkage tests, Emmanuel Roziere, Ahmed Z. Bendimerad, Hamza Samouh, Ahmed Loukili, Journal of Building Engineering, Vol. 64, number 105549, issue 74 (2023), doi:10.1016/j.jobe.2022.105549
Fault friction under thermal pressurization during large seismic-slip: Numerical analyses and extension of the model of frictional slip, Alexandros Stathas, Ioannis Stefanou, International Journal of Mechanical Sciences, Vol. 248, number 108184, issue 5 (2023), doi:10.1016/j.ijmecsci.2023.108184
Multiscale investigation of cement pastes with low and high-grade calcined clays and slag at early and advanced ages, I. Bekrine, B. Hilloulin, A. Loukili, Journal of Building Engineering, Vol. 78, number 107570 (2023), doi:10.1016/j.jobe.2023.107570
Identifying the parameters of a hydro-mechanical model for internal erosion occurring in granular soils by using an enhanced backtracking search algorithm, Jie Yang, Yin Fu Jin, Zhen Yu Yin, Farid Laouafa, Pierre Yves Hicher, European Journal of Environmental and Civil Engineering, Vol. 27, issue 6, pp. 2325-2344 (2023), doi:10.1080/19648189.2020.1752809
Analyzing sandwich panel with new proposed core for bending and compression resistance, Tarek Mesto, Maya Sleiman, Khaled Khalil, Samer Alfayad, Frédéric Jacquemin, Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, Vol. 237, issue 2, pp. 367-378 (2023), doi:10.1177/14644207221115576
A consistent multiscale mechanical formulation for media with randomly distributed voids, P. J. Blanco, P. J. Sánchez, F. F. Rocha, S. Toro, R. A. Feijóo, International Journal of Solids and Structures, Vol. 283, number 112494, issue 2022 (2023), doi:10.1016/j.ijsolstr.2023.112494
Inventory analysis of the carbon fibres reinforced polyphenylene sulfide thermo-stamping manufacturing process, Vincent Lacoma, Jean Luc Bailleul, Sandy Moisan, Guillaume Vincent, Christophe Binetruy, Olivier Kerbrat, Journal of Cleaner Production, Vol. 393, number 136337, issue 30 (2023), doi:10.1016/j.jclepro.2023.136337
Effect of the deposition direction on fracture propagation in a Duplex Stainless Steel manufactured by Directed Energy Deposition, David Roucou, Thomas Corre, Gilles Rolland, Véronique Lazarus, Materials Science and Engineering A, Vol. 878, number 145176, issue 8 (2023), doi:10.1016/j.msea.2023.145176
Elastic constants of nano-scale hydrated cement paste composites using reactive molecular dynamics simulations to homogenization of hardened cement paste mechanical properties, Sela Hoeun, Fabrice Bernard, Frédéric Grondin, Siham Kamali-Bernard, Syed Yasir Alam, Materials Today Communications, Vol. 36, number 106671, issue 4 (2023), doi:10.1016/j.mtcomm.2023.106671
DeepBND: A machine learning approach to enhance multiscale solid mechanics, Felipe Rocha, Simone Deparis, Pablo Antolin, Annalisa Buffa, Journal of Computational Physics, Vol. 479, number 111996, issue 4 (2023), doi:10.1016/j.jcp.2023.111996
Gas-particle flow of cohesive aluminium powders during laser metal deposition – Experimental and numerical investigation, Stéphane Touzé, Matthieu Rauch, Jean Yves Hascoët, Advanced Powder Technology, Vol. 34, number 104182, issue 10 (2023), doi:10.1016/j.apt.2023.104182
Unified numerical process modeling of forming and consolidation for thermoplastic composites with prepreg patches, P. D. Mulye, L. Morançay, C. Binetruy, S. Comas-Cardona, A. Leygue, D. Guillon, Frontiers in Materials, Vol. 10, number 211 (2023), doi:10.3389/fmats.2023.1176482
A dynamic hysteresis model of heat and mass transfer for hygrothermal bio-based materials, Yuliang Zou, Geoffrey Promis, Frédéric Grondin, Mazen Saad, Ahmed Loukili, Huan Wang, Journal of Building Engineering, Vol. 79, number 107910, issue 3 (2023), doi:10.1016/j.jobe.2023.107910
Development of flax/basalt/PA11 bio-composites: optimal formulation and modelling of the quasi-static behaviour, Wassim Guerfala, Patrick Rozycki, Christophe Binetruy, Frontiers in Materials, Vol. 10, number 813 (2023), doi:10.3389/fmats.2023.1176408
On the thermodynamics consistency of Gurson's model and its computational implications, Céline Bouby, Léo Morin, François Bignonnet, Luc Dormieux, Djimédo Kondo, International Journal of Solids and Structures, Vol. 279, number 112359, issue 7 (2023), doi:10.1016/j.ijsolstr.2023.112359
Unified System Analysis for Time-Variant Reliability of a Floating Offshore Substation, Franck Schoefs, Mestapha Oumouni, Morteza Ahmadivala, Neil Luxcey, Florian Dupriez-Robin, Patrick Guerin, Journal of Marine Science and Engineering, Vol. 11, number 1924, issue 10 (2023), doi:10.3390/jmse11101924
Computation of energy evolution during the dynamic fracture of elastomers using the finite viscoelastic model: Its implementation in Abaqus, Vasudevan Kamasamudram, Michel Coret, Nicolas Moës, Mechanics of Materials, Vol. 181, number 104638, issue 5152 (2023), doi:10.1016/j.mechmat.2023.104638
Homogenized elasticity and domain of linear elasticity of 2D architectured materials, V. Jeanneau, C. Combescure, M. L.M. François, International Journal of Solids and Structures, Vol. 269, number 112185, issue 5 (2023), doi:10.1016/j.ijsolstr.2023.112185
Characterisation and propagation of spatial fields in deterioration models: application to concrete carbonation, N. Rakotovao Ravahatra, E. Bastidas-Arteaga, F. Schoefs, F. Duprat, T. de Larrard, M. Oumouni, European Journal of Environmental and Civil Engineering, Vol. 27, issue 6, pp. 2261-2287 (2023), doi:10.1080/19648189.2019.1620133
Effect of Retarders on the Reactivity and Hardening Rate of Alkali-Activated Blast Furnace Slag Grouts, Faten Souayfan, Emmanuel Rozière, Ahmed Loukili, Christophe Justino, Materials, Vol. 16, number 5824, issue 17 (2023), doi:10.3390/ma16175824
Spatial distribution of mineral development in Carboniferous Bowland Shale, UK at 3D micro- to nano- scales, Jingyue Hao, Lin Ma, Cathy Hollis, Anne Laure Fauchille, Kevin G. Taylor, International Journal of Coal Geology, Vol. 271, number 104236 (2023), doi:10.1016/j.coal.2023.104236
The effects of sample preparation on the pore structure and phase composition of the sulfated cement pastes, Iman A.N. Omrani, Waldemar Maniukiewicz, Marcin Świątkowski, Marta Choińska Colombel, Dalia Bednarska, Marcin Koniorczyk, Construction and Building Materials, Vol. 386, number 131592, issue 5 (2023), doi:10.1016/j.conbuildmat.2023.131592
An analytical friction model for fibre tow slippage in Tailored Fibre Placement preforms based on pull-out experiments, J. Simon, S. Comas-Cardona, C. Binétruy, B. Masseteau, N. Hamila, Composites Part B Engineering, Vol. 264, number 110906, issue 1 (2023), doi:10.1016/j.compositesb.2023.110906
Effect of thermal cycles on volumetric and shear behavior of sand–concrete interface, Kexin Yin, Roxana Vasilescu, Geomechanics for Energy and the Environment, Vol. 36, number 100503, issue 4 (2023), doi:10.1016/j.gete.2023.100503
Effect of Temperature on the Lattice Strain Evolution in a Textured Alpha Titanium: Neutron Diffraction and Modelling, Kodjo Emmanuel Agbovi, Baptiste Girault, Jamal Fajoui, Saurabh Kabra, Winfried Kockelmann, Pierre Antoine Dubos, David Gloaguen, JOM, Vol. 75, issue 8, pp. 3055-3066 (2023), doi:10.1007/s11837-023-05840-4
COMBINED TECHNIQUES AND RELEVANT IMAGE PROCESSING FOR QUANTITATIVE STATISTICAL CHARACTERIZATION OF INCLUSIONS IN ELASTOMERS, Thomas Glanowski, Matthieu Le Saux, Vincent Le Saux, Bertrand Huneau, Clément Champy, Pierre Charrier, Yann Marco, Rubber Chemistry and Technology, Vol. 96, issue 1, pp. 59-89 (2023), doi:10.5254/rct.22.22970
The Effect of Preconditioning Temperature on Gas Permeability of Alkali-Activated Concretes †, Patrycja Duży, Marta Choinska Colombel, Izabela Hager, Ouali Amiri, Materials, Vol. 16, number 4143, issue 11 (2023), doi:10.3390/ma16114143
Residual Stress Gradient Built in X40CrMoVN16-2 Austenitic Steel Cube Manufactured by Laser Powder Bed Fusion, B. Girault, M. Limousin, D. Gloaguen, L. Van Belle, P. A. Dubos, S. Branchu, M. Girard, P. Y. Durand, M. J. Moya, C. Colin, S. Kabra, W. Kockelmann, B. Courant, Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, Vol. 54, issue 10, pp. 4012-4030 (2023), doi:10.1007/s11661-023-07148-z
New Repair Material for Ordinary Concrete Substrates: Investigating Self-Compacting Sand Concrete and Its Interaction with Roughness of the Substrate Surface, Karim Belmokretar, Kada Ayed, Djamel Eddine Kerdal, Nordine Leklou, Mohamed Mouli, Journal of Materials in Civil Engineering, Vol. 35, number 432, issue 9 (2023), doi:10.1061/JMCEE7.MTENG-15348
Experimental Study of the Dimensional and Hygrothermal Properties of Hemp Concrete under Accelerated Aging, Théo Poupard, Junior Tchiotsop, Nabil Issaadi, Ouali Amiri, Buildings, Vol. 13, number 2414, issue 10 (2023), doi:10.3390/buildings13102414
Towards quantifying the effect of pump wave amplitude on cracks in the Nonlinear Coda Wave Interferometry method, Shilin Qu, Benoît Hilloulin, Olivier Chupin, Jean Michel Piau, Odile Abraham, Vincent Tournat, Ultrasonics, Vol. 132, number 106991, issue 2 (2023), doi:10.1016/j.ultras.2023.106991
Stochastic Multiphasic Multivariate State-Based Degradation and Maintenance Meta-Models for RC Structures Subject to Chloride Ingress, Boutros El Hajj, Bruno Castanier, Franck Schoefs, Emilio Bastidas-Arteaga, Infrastructures, Vol. 8, number 36, issue 2 (2023), doi:10.3390/infrastructures8020036
Characterization of Al-12Si Thin-Wall Properties Fabricated with Laser Direct Energy Deposition, Raihan Rumman, Mallaiah Manjaiah, Stéphane Touzé, Ruby Alice Sims, Jean Yves Hascoët, Jamie Scott Quinton, Sustainability Switzerland, Vol. 15, number 12806, issue 17 (2023), doi:10.3390/su151712806
Experimental investigation of the loading speed effects on the performances of ultrasonically welded PA66/glass fabric composites, Pauline Bourda, Mamadou Abdoul Mbacké, Patrick Rozycki, Composites Part B Engineering, Vol. 253, number 110537, issue 6 (2023), doi:10.1016/j.compositesb.2023.110537
Solidification Study of an Organic Fine Sediment Using Geopolymer Binders Properties, Ishak Moghrabi, Harifidy Ranaivomanana, Fateh Bendahmane, Ouali Amiri, Dimitri Deneele, International Journal of Geomechanics, Vol. 23, number 721, issue 10 (2023), doi:10.1061/IJGNAI.GMENG-8187
Experimental investigation of the alternate recurrence of quasi-static and dynamic crack propagation in PMMA, Raphael Heinzmann, Rian Seghir, Syed Yasir Alam, Julien Réthoré, International Journal of Fracture, Vol. 242, issue 2, pp. 227-245 (2023), doi:10.1007/s10704-023-00717-8
Effect of the confinement type on the mechanical performance of glass waste concrete: Experimental and numerical modeling, O. Fedaoui-Akmoussi, F. Taouche-Kheloui, T. Ben Chabane, N. Leklou, M.Almansba, Engineering Failure Analysis, Vol. 143, number 106898, issue 3-A (2023), doi:10.1016/j.engfailanal.2022.106898
Local water content field within an epoxy/metal bonded assembly in immersion, R. Grangeat, M. Girard, C. Lupi, F. Jacquemin, Journal of Adhesion, Vol. 99, issue 3, pp. 432-448 (2023), doi:10.1080/00218464.2021.2021893
Two multifidelity kriging-based strategies to control discretization error in reliability analysis exploiting a priori and a posteriori error estimators, Ludovic Mell, Valentine Rey, Franck Schoefs, Computers and Structures, Vol. 274, number 106897, issue 3 (2023), doi:10.1016/j.compstruc.2022.106897
Development of flexible piezoelectric sole with wireless communication for medical application, Samia Adrar, Mohammed El Gibari, Philippe Saillant, Jean Christophe Thomas, Raynald Seveno, Biomedical Signal Processing and Control, Vol. 85, number 104878, issue 2 (2023), doi:10.1016/j.bspc.2023.104878
Micromechanical Properties Assessment of Slag Blended Cements Using Nanoindentation and Scanning Electron Microscopy, Imane Bekrine, Benoît Hilloulin, Ahmed Loukili, International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement-based Materials and Concrete Structures, Vol. 44, pp. 88-98 (2023), doi:10.1007/978-3-031-33187-9_9
On the limitations of low-rank approximations in contact mechanics problems, Kiran Sagar Kollepara, José M. Navarro-Jiménez, Yves Le Guennec, Luisa Silva, José V. Aguado, International Journal for Numerical Methods in Engineering, Vol. 124, issue 1, pp. 217-234 (2023), doi:10.1002/nme.7118
INFUSION AND POLYMERIZATION OF THICK GLASS/ELIUM® ACRYLIC THERMOPLASTIC RESIN COMPOSITES, Nihad Siddig, Yvan Denis, Sébastien Comas-Cardona, Philippe Le Bot, Antoine De Fontgalland, Damien Lecointe, Christophe Binetruy, Iccm International Conferences on Composite Materials (2023)
An analytical approach of design for recycling of laminate structures by the use of magnetic pulse disassembling, Benoit Lagain, Thomas Heuzé, Guillaume Racineux, Michel Arrigoni, International Journal of Solids and Structures, Vol. 275, number 112290, issue 18 (2023), doi:10.1016/j.ijsolstr.2023.112290
Robust boundary tracking control of wave PDE: Insight on forcing slow-aseismic response, Diego Gutiérrez-Oribio, Yury Orlov, Ioannis Stefanou, Franck Plestan, Systems and Control Letters, Vol. 178, number 105571, issue 4 (2023), doi:10.1016/j.sysconle.2023.105571
Corrosion and Reliability Assessment of Inspected Pipelines, Rafael Amaya-Gómez, Emilio Bastidas-Arteaga, Mauricio Sánchez-Silva, Franck Schoefs, Felipe Muñoz, ISBN:[9783031435317, 9783031435324] (2023), doi:10.1007/978-3-031-43532-4
Numerical estimation of the permeability of granular soils using the DEM and LBM or FFT-based fluid computation method, Ngoc Son Nguyen, François Bignonnet, Granular Matter, Vol. 25, number 711, issue 3 (2023), doi:10.1007/s10035-023-01330-1
Characterization and modelling of the hygro-viscoelastic behaviour of polymer-based composites used in marine environment, Quentin Dezulier, Alexandre Clement, Peter Davies, Frédéric Jacquemin, Mael Arhant, Benjamin Flageul, Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences, Vol. 381, number 1, issue 2240 (2023), doi:10.1098/rsta.2021.0221
A Simple 3D Cell Culture Method for Studying the Interactions between Human Mesenchymal Stromal/Stem Cells and Patients Derived Glioblastoma †, Lisa Oliver, Arturo Álvarez-Arenas, Céline Salaud, Juan Jiménez-Sanchez, Gabriel F. Calvo, Juan Belmonte-Beitia, Stephanie Blandin, Luciano Vidal, Victor Pérez, Dominique Heymann, François M. Vallette, Cancers, Vol. 15, number 1304, issue 4 (2023), doi:10.3390/cancers15041304
On the statistical behavior of homogenized properties and ultrasonic phase velocities in random polycrystals, Ningyue Sheng, Shahram Khazaie, Mathilde Chevreuil, Sylvain Fréour, International Journal of Solids and Structures, Vol. 285, number 112531, issue 20 (2023), doi:10.1016/j.ijsolstr.2023.112531
Uncertainty quantification of semi-destructive testing for chloride content assessment for a concrete bridge in maritime environment, Franck Schoefs, Keita Awa Zahui Raissa, Stephanie Bonnet, Alan John O’Conor, Frontiers in Built Environment, Vol. 9, number 1122 (2023), doi:10.3389/fbuil.2023.1130066
Guiding severely anisotropic twinning bands in Magnesium: An in situ investigation by full-field microscopic image correlation, S. Can Erman, Laurent Stainier, C. Can Aydıner, Materials Today Communications, Vol. 35, number 106203 (2023), doi:10.1016/j.mtcomm.2023.106203
A two-scale solver for linear elasticity problems in the context of parallel message passing, Alexis Salzman, Nicolas Moës, Computer Methods in Applied Mechanics and Engineering, Vol. 407, number 115914, issue 4 (2023), doi:10.1016/j.cma.2023.115914
An optimal-transport finite-particle method for mass diffusion, A. Pandolfi, L. Stainier, M. Ortiz, Computer Methods in Applied Mechanics and Engineering, Vol. 416, number 116385, issue 4 (2023), doi:10.1016/j.cma.2023.116385
Efficient dual-scale flow simulation for Resin Transfer Molding process based on domains skeletonization, S. Bancora, C. Binetruy, S. Advani, S. Comas-Cardona, A. Leygue, Composites Part A Applied Science and Manufacturing, Vol. 165, number 107319, issue 3 (2023), doi:10.1016/j.compositesa.2022.107319
Support vectors machines for the estimation of probability of failure: Multifidelity classifiers built from a posteriori discretization error estimators, Ludovic Mell, Valentine Rey, Franck Schoefs, Structural Safety, Vol. 102, number 102321, issue 247 (2023), doi:10.1016/j.strusafe.2023.102321
Creep analysis of cementitious materials in seawater using a poro-chemo-mechanical model, Marinelle El-Khoury, Frédéric Grondin, Benoît Hilloulin, Emmanuel Rozière, Rachid Cortas, Fadi Hage Chehade, Marine Structures, Vol. 90, number 103431 (2023), doi:10.1016/j.marstruc.2023.103431
A revisited compression flow model for concentrated suspensions with fiber-friction interactions, François Mahé, Christophe Binetruy, Suresh Advani, Julien Férec, Benedikt Eck, Journal of Non Newtonian Fluid Mechanics, Vol. 319, number 105090, issue 5 (2023), doi:10.1016/j.jnnfm.2023.105090
Accelerated Carbonation of Recycled Concrete Aggregates and Model Materials, Farah Kaddah, Ouali Amiri, Harifidy Ranaivomanana, Emmanuel Roziere, International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement-based Materials and Concrete Structures, Vol. 44, pp. 572-580 (2023), doi:10.1007/978-3-031-33187-9_53
Variational approach to viscoelastic fracture: comparison of a phase-field and a lip-field approach, Rajasekar Gopalsamy, Nicolas Chevaugeon, Olivier Chupin, Ferhat Hammoum, International Journal of Fracture, Vol. 244, issue 1-2, pp. 163-185 (2023), doi:10.1007/s10704-023-00725-8
In Situ Tensile Testing under High-Speed Optical Recording to Determine Hierarchical Damage Kinetics in Polymer Layers of Flax Fibre Elements, Emmanuelle Richely, Johnny Beaugrand, Michel Coret, Christophe Binetruy, Pierre Ouagne, Alain Bourmaud, Sofiane Guessasma, Polymers, Vol. 15, number 2794, issue 13 (2023), doi:10.3390/polym15132794
Semi-automatic segmentation of pelvic bone tumors: Usability testing, Luciano Vidal, Vincent Biscaccianti, Henri Fragnaud, Jean Yves Hascoët, Vincent Crenn, Annals of 3D Printed Medicine, Vol. 9, number 100098, issue 6 (2023), doi:10.1016/j.stlm.2022.100098
Experimental Study of the Mechanical Behavior of Polyvinyl Chloride Foam under Shear Stress, Karim Mharsi, Jamal Fajoui, Pascal Casari, Mohamed Kchaou, Journal of Materials Engineering and Performance, Vol. 32, issue 17, pp. 7879-7894 (2023), doi:10.1007/s11665-022-07672-w
Comparison of Machine Learning Algorithms for the Prediction of the External Sulphate Attack Resistance of Blended Cements, Abdelhamid Hafidi, Benoit Hilloulin, Sonia Boudache, Umunnakwe Rejoice, Ahmed Loukili, International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement-based Materials and Concrete Structures, Vol. 44, pp. 725-735 (2023), doi:10.1007/978-3-031-33187-9_67
A Benchmarking of Slag Blended Cement Hydration Models, Jack Atallah, Harifidy Ranaivomanana, François Bignonnet, Stéphanie Bonnet, International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement-based Materials and Concrete Structures, Vol. 43, pp. 23-33 (2023), doi:10.1007/978-3-031-33211-1_2
A strain based Lipschitz regularization for materials undergoing damage, Vasudevan Kamasamudram, Laurent Stainier, Comptes Rendus Mecanique, Vol. 351, issue G1, pp. 125-149 (2023), doi:10.5802/crmeca.176
Statistical properties of effective elastic moduli of random cubic polycrystals, Ningyue Sheng, Shahram Khazaie, Mathilde Chevreuil, Sylvain Fréour, Mechanics and Industry, Vol. 24, number 33, issue 2 (2023), doi:10.1051/meca/2023030
Modelling the Flexural Hysteresis Behaviour of Bretelle Dampers Based on a Quasi-Static Bending Test, Shima Zamanian, Sebastien Langlois, Alex Loignon, Alireza Ture Savadkoohi, Marc L.M. Francois, IEEE Transactions on Power Delivery, Vol. 38, issue 6, pp. 4081-4089 (2023), doi:10.1109/TPWRD.2023.3307907
Interface Shear Behavior of MGS-1 and JEZ-1 Martian Regolith Simulants, Kexin Yin, Roxana Vasilescu, Jian Meng, An Chen, Journal of Aerospace Engineering, Vol. 36, number 469, issue 6 (2023), doi:10.1061/JAEEEZ.ASENG-4671
Fingering and strain localization in porous media during imbibition processes, Mohammed Zaïm, Siddhartha Harsha Ommi, Frédéric Collin, Panagiotis Kotronis, Giulio Sciarra, International Journal for Numerical Methods in Engineering, Vol. 124, issue 16, pp. 3554-3581 (2023), doi:10.1002/nme.7261
Time delay effect in the dynamic response of submerged cylinder subjected to an underwater explosion, Y. P.Sone Oo, H. Le Sourne, K. Brunellière, Advances in the Analysis and Design of Marine Structures Proceedings of the 9th International Conference on Marine Structures Marstruct 2023, pp. 669-677, ISBN:[9781032506364] (2023), doi:10.1201/9781003399759-74
An Experimental Investigation on Shear Strength, Deformation, and Particle Breakage of Carbonate Sand-Concrete Interface through Direct Shear Tests Subjected to Monotonic-Cyclic Thermal Loadings, Kexin Yin, Roxana Vasilescu, Journal of Materials in Civil Engineering, Vol. 35, number 1, issue 11 (2023), doi:10.1061/JMCEE7.MTENG-15734
A non-linear multiscale chemo-mechanical model describing the delayed evolution of concrete structures in marine environments, Marinelle El-Khoury, Frédéric Grondin, Emmanuel Roziere, Rachid Cortas, Fadi Hage Chehade, Mechanics and Industry, Vol. 24, number 25 (2023), doi:10.1051/meca/2023023
Multiscale modeling of moisture diffusion in polymer/clay nanocomposites, Ali Makhloufi, Djelloul Gueribiz, Frédéric Jacquemin, Silvain Freour, Journal of Reinforced Plastics and Composites, Vol. 42, issue 21-22, pp. 1154-1166 (2023), doi:10.1177/07316844221146231
Comparing different stabilization strategies for reduced order modeling of viscoelastic fluid flow problems, Manisha Chetry, Domenico Borzacchiello, Gaetano D'Avino, Luisa Rocha Da Silva, Computers and Fluids, Vol. 265, number 106013, issue 9 (2023), doi:10.1016/j.compfluid.2023.106013
Performance Assessment of Distributed Strain Sensing Techniques for Convergence Monitoring of Radioactive Waste Repository, Arianna Piccolo, Yann Lecieux, Sylvie Lesoille, Pierre Teixeira, Johan Bertrand, Dominique Leduc, Sensors, Vol. 23, number 398, issue 1 (2023), doi:10.3390/s23010398
Digital Fabrication in Construction Industry in Africa, Karim Fahfouhi, Dino Freitas, Philippe Poullain, Flávio Craveiro, Helena Bártolo, Proceedings of the 2nd International Conference on Water Energy Food and Sustainability Icowefs 2022, pp. 470-479, ISBN:[9783031268489] (2023), doi:10.1007/978-3-031-26849-6_48
Shape parameterizations for reduced order modeling in biophysics, Nathan Lauzeral, Domenico Borzacchiello, ISBN:[9780323915762, 9780323899673] (2023), doi:10.1016/B978-0-32-389967-3.00005-6
Service Life Prediction of Reinforced Concrete Coastal Structures in Vietnam Subjected to Chloride Ingress, Quynh Chau Truong, Chinh Van Nguyen, Charbel Pierre El Soueidy, Emilio Bastidas-Arteaga, ICSCEA 2021, Vol. 268, pp. 467-475, ISBN:[9789811933028] (2023), doi:10.1007/978-981-19-3303-5_40
Bayesian calibration of a non linear damage model of steel structures with random material property: Sensitivity analysis and reliability assessment, Clément Freyssinet, Valentine Rey, Franck Schoefs, Tanguy Moro, Engineering Structures, Vol. 295, number 116853, issue 2 (2023), doi:10.1016/j.engstruct.2023.116853
Correlation Between Chloride Ions’ Migration and Diffusion Coefficients of Alkali-Activated Concrete, Patrycja Duzy, Izabela Hager, Marta Choińska, Ouali Amiri, International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement-based Materials and Concrete Structures, Vol. 44, pp. 1204-1216 (2023), doi:10.1007/978-3-031-33187-9_112
Investigation of the Protection Efficiency of Repair Mortar Against Chloride Corrosion in Repaired Zones of Reinforced Concrete, Abderrahmane Soufi, Abdelkarim Aït-Mokhtar, Pierre Yves Mahieux, Amiri Ouali, International Journal of Civil Engineering, Vol. 21, issue 10, pp. 1709-1724 (2023), doi:10.1007/s40999-023-00859-9
Mind-Mapping Assessment of Reuse Potential of Glulam: An Experimental Study, Aghiless Yahmi, Mustapha Nouri, Mahfoud Tahlaiti, Abdelhafid Khelidj, Charlène Raffin, Nicolas Place, Buildings, Vol. 13, number 2929, issue 12 (2023), doi:10.3390/buildings13122929
Internal stabilization of three interconnected semilinear reaction-diffusion PDEs with one actuated state, Constantinos Kitsos, Rami Katz, Emilia Fridman, IFAC-PapersOnLine, IFAC Papersonline, Vol. 56, pp. 8934-8939, ISBN:[9781713872344] (2023), doi:10.1016/j.ifacol.2023.10.101
Electrohydraulic Crimping of Tubes within Rings, Ronan Le Mentec, Cheick Tidiane Sow, Thomas Heuzé, Patrick Rozycki, Guillaume Racineux, Metals, Vol. 13, number 1382, issue 8 (2023), doi:10.3390/met13081382
Assessment of the thermal effect of biofouling on the submarine dynamic cable of floating offshore wind turbines, Z. Maksassi, B. Garnier, A. Ould El Moctar, F. Schoefs, Trends in Renewable Energies Offshore Proceedings of the 5th International Conference on Renewable Energies Offshore Renew 2022, pp. 787-793, ISBN:[9781032420035] (2023), doi:10.1201/9781003360773-88
Coupled effects of simultaneous autogenous self-healing and sustained flexural loading in cementitious materials, Benoît Hilloulin, Carol Youssef Namnoum, Frédéric Grondin, Ahmed Loukili, Journal of Building Engineering, Vol. 79, number 107895 (2023), doi:10.1016/j.jobe.2023.107895
Numerical Analysis of Cross-Sectional Effects During the Magnetic Pulse Disassembly of Laminate Structures, Benoit Lagain, Thomas Heuzé, Guillaume Racineux, Michel Arrigoni, Advanced Engineering Materials, Vol. 25, number 108, issue 20 (2023), doi:10.1002/adem.202300728
Dilatometric Study of Continuous Annealing of a Cold-Rolled Austenitic Stainless Steel, Abdelali Hayoune, Halima Maredj, Jamal Fajoui, Pierre Antoine Dubos, Steel Research International, Vol. 94, issue 10 (2023), doi:10.1002/srin.202300054
Mechanical behaviour for aeronautical structures with embedded electric cables under low energy impact, T. Vogel, J. C. Walrick, P. Casari, Journal of Physics: Conference Series, Journal of Physics Conference Series, Vol. 2526 (2023), doi:10.1088/1742-6596/2526/1/012034
Modelling the forming of tailored fibre placement preforms: A tetrahedral part with final orthotropic orientations, Jessy Simon, Nahiene Hamila, Christophe Binétruy, Sébastien Comas-Cardona, Materials Research Proceedings, Vol. 28, pp. 231-238, ISBN:[9781644902462] (2023), doi:10.21741/9781644902479-25
Multiphysics simulation of an anisothermal reactive spontaneous capillary rise between electric rotor wires, Amélie Moisy, Sébastien Comas-Cardona, Nicolas Désilles, Pascal Genevée, Jere Kolehmainen, Frontiers in Materials, Vol. 10, number 146 (2023), doi:10.3389/fmats.2023.1124176
Packing simulation applied to thermoplastic composite wastes, Awen Bruneau, C. Binetruy, S. Comas, C. Landry, N. Durand, Iccm International Conferences on Composite Materials (2023)
The Role of Seismic Slip Velocity in the Evolution of Shear Band Thickness, Alexandros Stathas, Ioannis Stefanou, Multiscale Processes of Instability, Deformation and Fracturing in Geomaterials, pp. 99-113, ISBN:[9783031222122] (2023), doi:10.1007/978-3-031-22213-9_11
Editorial: ECCM Research Topic on advanced manufacturing of composites, Christophe Binetruy, Baris Caglar, Lode Daelemans, Clemens Dransfeld, Véronique Michaud, Frontiers in Materials, Vol. 10 (2023), doi:10.3389/fmats.2023.1296247
Non-linear Analysis of Bottle-Shaped Isolated Struts Concrete Deteriorated by Alkali Silica Reactions, F. A.N. Silva, I. S. Lira, A. C. Azevedo, J. M.P.Q. Delgado, A. M. Matos, M. Tahlaiti, A. Khelidj, Building Pathologies: Experimental Campaigns and Numerical Procedures, Vol. 25, pp. 77-102 (2023), doi:10.1007/978-3-031-17061-4_3
Simplified modeling for elastic analysis of a floating body in heave motion, Massicilia Dahmani, Abdelghani Seghir, Nabil Issaadi, Ouali Amiri, World Journal of Engineering, Vol. 20, issue 5, pp. 918-930 (2023), doi:10.1108/WJE-07-2021-0445
An iterative multi-fidelity approach for model order reduction of multidimensional input parametric PDE systems, Manisha Chetry, Domenico Borzacchiello, Lucas Lestandi, Luisa Rocha Da Silva, International Journal for Numerical Methods in Engineering, Vol. 124, issue 22, pp. 4941-4962 (2023), doi:10.1002/nme.7333
Chemical and Creep Models Applied to Concrete Damaged by Alkali–Silica Reactions, Rodrigo F. Roma, Fernando A.N. Silva, Mohamed K. Bourbatache, Mahfoud Tahlaiti, João M.P.Q. Delgado, António C. Azevedo, Buildings, Vol. 13, number 2575, issue 10 (2023), doi:10.3390/buildings13102575
Friction Stir Welding Operating Window for Aluminum Alloy Obtained by Temperature Measurement, Moura Abboud, Laurent Dubourg, Adrien Leygue, Guillaume Racineux, Olivier Kerbrat, Friction Stir Welding and Processing XII, pp. 171-182, ISBN:[9783031226601] (2023), doi:10.1007/978-3-031-22661-8_16
ELABORATION OF HYBRID BIO-COMPOSITES WITH THERMOPLASTIC MATRIX: MATERIAL FORMULATION AND MODELLING OF THE QUASI-STATIC BEHAVIOUR, Wassim Guerfala, Patrick Rozycki, Christophe Binetruy, Iccm International Conferences on Composite Materials (2023)
MODELLING OF RIGID INCLUSIONS REINFORCED FOUNDATIONS TO INVESTIGATE THE FAILURE ENVELOPE IN THE V-M-H SPACE (COMPDYN 2023), Ramon Alcala-Ochoa, Zheng Li, Panagiotis Kotronis, Giulio Sciarra, Compdyn Proceedings (2023)
Simulating the Hydration Process of Low Water to Cement (w/c) Ternary Pastes Incorporating Superabsorbent Polymers (SAP), Judy Kheir, Benoît Hilloulin, Ahmed Loukili, Nele De Belie, Proceedings of the 75th RILEM Annual Week 2021, Vol. 40, pp. 100-107 (2023), doi:10.1007/978-3-031-21735-7_13
Enforcement of interface laws for dissipative vibro-acoustic problems within high-order X-FEM, Shaoqi Wu, Grégory Legrain, Olivier Dazel, Computer Methods in Applied Mechanics and Engineering, Vol. 414, number 116144, issue 2 (2023), doi:10.1016/j.cma.2023.116144
ASSESSMENT OF 4-POINT BENDING FATIGUE PERFORMANCE OF COMPOSITE SANDWICHES WITH REDUCED CARBON FOOTPRINT, Yuan Wu, Pascal Casari, Marie Laetitia Pastor, Marianne Perrin, Xiaojing Gong, 9th International Conference on the Fatigue of Composites Icfc 2023 Scientific Program and Book of Abstracts (2023)
Multi-scale Modelling of Natural Composites Using Thermodynamics-Based Artificial Neural Networks and Dimensionality Reduction Techniques, Giovanni Piunno, Ioannis Stefanou, Cristina Jommi, Geotechnical Engineering in the Digital and Technological Innovation Era, pp. 365-372, ISBN:[9783031347603] (2023), doi:10.1007/978-3-031-34761-0_45
Study of Hydration Properties for Blast Furnace Slag-Blended Cement: Prediction of Slag Hydration Kinetics, Mohamad Ali Ahmad, Harifidy Ranaivomanana, Stéphanie Bonnet, Valérie L’Hostis, Paul Buttin, International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement-based Materials and Concrete Structures, Vol. 44, pp. 165-176 (2023), doi:10.1007/978-3-031-33187-9_16
Characterization of the dynamic fracture toughness of composite materials by a microscopic approach, B. Lammens, G. Portemont, J. Berthe, R. Seghir, J. Réthoré, Iccm International Conferences on Composite Materials (2023)
ESTIMATION OF THE HYGRO-ELASTIC PROPERTIES OF A CARBON/EPOXY COMPOSITE TAKING INTO ACCOUNT HYGROMECHANICAL COUPLINGS, Melissa Said, Amandine Célino, Georges Challita, Sylvain Fréour, Iccm International Conferences on Composite Materials (2023)
GLRC_HEGIS Global Nonlinear Cyclic Model for Reinforced Concrete Walls and Slabs, Miquel Huguet, Michele Massarella, Olivier Lherminier, Silvano Erlicher, Panagiotis Kotronis, François Voldoire, Building for the Future: Durable, Sustainable, Resilient, Vol. 350 LNCE, pp. 459-468, ISBN:[9783031325106] (2023), doi:10.1007/978-3-031-32511-3_49
Correction to: Experimental investigation of the alternate recurrence of quasi-static and dynamic crack propagation in PMMA (International Journal of Fracture, (2023), 242, 2, (227-245), 10.1007/s10704-023-00717-8), Raphael Heinzmann, Rian Seghir, Syed Yasir Alam, Julien Réthoré, International Journal of Fracture, Vol. 243, issue 1, pp. 123 (2023), doi:10.1007/s10704-023-00736-5
Shear Transfer Mechanisms in RC Beams: Shear Drops Monitoring with Coupled Acoustic Emission and Image Correlation, Ahmed Belbachir, Syed Yasir Alam, Mohammed Matallah, Ahmed Loukili, Building for the Future: Durable, Sustainable, Resilient, Vol. 350 LNCE, pp. 797-806, ISBN:[9783031325106] (2023), doi:10.1007/978-3-031-32511-3_82
Alteration Under Wet/Dry Cycles of a Carbonated Clay-Rich Soil from Azazga Landslide Site, Sabrina Haddad, Bachir Melbouci, Fabien Szymkiewicz, Myriam Duc, Ouali Amiri, Geotechnical and Geological Engineering, Vol. 41, issue 2, pp. 1453-1472 (2023), doi:10.1007/s10706-022-02347-8
Correction to: Alteration Under Wet/Dry Cycles of a Carbonated Clay-Rich Soil from Azazga Landslide Site (Geotechnical and Geological Engineering, (2023), 41, 2, (1453-1472), 10.1007/s10706-022-02347-8), Sabrina Haddad, Bachir Melbouci, Fabien Szymkiewicz, Myriam Duc, Ouali Amiri, Geotechnical and Geological Engineering, Vol. 41, issue 3, pp. 2237 (2023), doi:10.1007/s10706-022-02365-6
Numerical Simulation of Weld Thermal Efficiency GTAW Process, Mouad Bensada, Abdellah Laazizi, Kaoutar Fri, Jamal Fajoui, Advances in Integrated Design and Production II, pp. 353-362, ISBN:[9783031236143] (2023), doi:10.1007/978-3-031-23615-0_36
Effect of Chemical and Physical Treatments on Mechanical Properties of Diss Fibers-Based Biocomposites Materials, Mustapha Nouri, Mahfoud Tahlaiti, Fréderic Grondin, Journal of Natural Fibers, Vol. 20, number 39, issue 1, pp. 88-102 (2023), doi:10.1080/15440478.2022.2128148
Some challenges and opportunities around lifetime performance and durability of wind turbines, V. Pakrashi, Kieran Ruane, Vesna Jaksic, Abdollah Malekjafarian, Michael O’Byrne, Franck Schoefs, Bidisha Ghosh, Luke J. Prendergast, Madjid Karimirad, Jimmy Murphy, Christopher Simon Wright, Deirdre O’Donnell, Gohar Shoukat, Ramon Varghese, Cian Desmond, S. Bhattacharya, ISBN:[9780323958301, 9780323993531] (2023), doi:10.1016/B978-0-323-99353-1.00032-3
Estimation de facteurs géométriques pour des mesures de résistivité avec des géométries de complexité croissante dans le béton, Sérgio Palma Lopes, Marie-Ange Eid, Houssein Ibrahim, Géraldine Villain, Stéphanie Bonnet, Academic Journal of Civil Engineering (2023), doi:10.26168/ajce.41.4.23
Time series analysis for database completion and forecast of sensors measurements: application to concrete structures, Luis Francisco Rincon Prada, Bassel Adel Habeeb, Emilio Bastidas-Arteaga, Elsa Eustáquio, Ameur El Amine Hamami, João Marcelino, Luís Oliveira Santos, Jose Matos, Yina Muñoz, Academic Journal of Civil Engineering (2023), doi:10.26168/ajce.41.3.11
Monitoring of the hydration of Portland concrete using embedded resistivity sensors: validation with modelling, Marie-Ange Eid, Jack Atallah, Géraldine Villain, Stéphanie Bonnet, Harifidy Ranaivomanana, Sérgio Palma Lopes, François Bignonnet, Proceedings of the International Conference on Non-destructive Evaluation of Concrete in Nuclear Applications, pp. 237-243, NDT.net (2023)
Suivi de vibrations pour la localisation de dommages : application à une maquette du pont de Saint Nazaire, Ambroise Cadoret, Clément Freyssinet, Md Delwar Hossain Bhuyan, Yann Lecieux, Michael Döhler, Laurent Mevel, Diagnobéton 2023 - 8e congrès international francophone Diagnobéton, pp. 1-8 (2023), doi:10.26168/ajce.41.4.21
Crack branching at low tip speeds: spilling the T, Elie Eid, Rian Seghir, Julien Réthoré, Journal of Theoretical, Computational and Applied Mechanics (2023), doi:10.46298/jtcam.10172
3-Dimensional analysis of fatigue crack fields and crack growth by in situ synchrotron X-ray tomography, A. Koko, S. Singh, S. Barhli, T. Connolley, N.T. Vo, T. Wigger, D. Liu, Y. Fu, Julien Réthoré, J. Lachambre, Jean-Yves Buffiere, T.J. Marrow, International Journal of Fatigue, Vol. 170, number 107541 (2023), doi:10.1016/j.ijfatigue.2023.107541
Influence of Spatial Variability on the Failure Probability to Initiation Time of Reinforced Concrete Structures under Chlorideinduced Corrosion, Romain Clerc, Charbel-Pierre El-Soueidy, Franck Schoefs, 14th International Conference on Applications of Statistics and Probability in Civil Engineering (ICASP14) (2023)
Spatial variability of concrete resistivity as a function of vibration and time, Yanyan Xiao, Romain Clerc, Franck Schoefs, Wael Karam, Yann Lecieux, Mathilde Chevreuil, Magda-Marcela Torres-Luque, Proceeding of the 8th conference Diagnobéton 2023 - Nantes, Vol. 41, Academic Journal of Civil Engineering (2023), doi:10.26168/ajce.41.4.6
Using control theory for preventing induced seismicity due to fluid injections in a reservoir, Diego Gutiérrez-Oribio, Ioannis Stefanou, Symposium on Energy Geotechnics 2023, Symposium on Energy Geotechnics - Accelerating the energy transition (2023), doi:10.59490/seg.2023.552
Proposition d'un modèle d'homogénéisation des propriétés mécaniques d'un limon traité à la chaux et au liant hydraulique, Lucile Pigeot, Anthony Soive, Nathalie Dufour, Jean-François Barthélémy, Fabienne Dermenonville, Ahmed Loukili, Congrès Français du Génie Civil CFGC 2023, Vol. 41 (2023), doi:10.26168/10.26168/ajce.41.1.21
Suivi d'un milieu immergé par identification de la résistivité : dispositif de mesure et choix de la paramétrisation, Wael Karam, Yann Lecieux, Mathilde Chevreuil, Franck Schoefs, Magda Luque, Academic Journal of Civil Engineering, Academic Journal of Civil Engineering (2023), doi:10.26168/ajce.41.4.24
Dynamic rupture and fragmentation of a bar with the Phase-field and Lip-field approach, Benoît Lé, Nicolas Moes, Andrew Stershic, The Seventh International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC2023) (2023)
Evaluation of the mean radiant temperature in microclimate modeling tools – case of an urban square in Szeged (Hungary), Merveil Muanda Lutete, Csila Gal Viktoria, Auline Rodler, Nabil Issaadi, Philippe Delpech, Maeva Sabre, Marjorie Musy, 11th International Conference on Urban Climate (2023)
Multi-Scale Modeling Of The Elastic Properties Of Hydrated Cement Paste With Consideration Of Adhesion Between Phases. Reactive Molecular Dynamics Simulations And Homogenization, Sela Hoeun, Fabrice Bernard, Frédéric Grondin, Siham Kamali-Bernard, Syed Yasir Alam, 11th International Conference on Fracture Mechanics of Concrete and Concrete Structures (2023), doi:10.21012/fc11.092320
3D study of overload effects on fatigue crack growth through X-ray tomography andimage correlation, 3D study of overload effects on fatigue crack growth through X-ray tomography and image correlation, Lucas Sanciet--Munier, Nathalie Limodin, Jean-Yves Buffiere, Jean-Francois Witz, Julien Réthoré, Michel Coret, Ghita Filali, Yves Gaillard, Michel Fleuriot, Anne Bonnin, Goran Lovric, Andrew King, J. Lachambre, Arnaud Weck, 17th International Conference on Advances in Experimental Mechanics, Fatigue Design (2023)
Un modèle analytique de friction pour les mèches de fibres placées par Tailored Fibre Placement, Jessy Simon, Sébastien Comas-Cardona, Christophe Binetruy, Nahiene Hamila, Benjamin Masseteau, JNC23 : Journées Nationales sur les Composites 2023 (2023)
Experimental characterization of the dynamic toughness of epoxy resin, Bastien Lammens, Gerald Portemont, Julien Berthe, Rian Seghir, Julien Réthoré, ICEM 2023 (2023)
Effect of slag and fly ash on Laboratory NDT measurements for long curing period, Gayelle Fahed, Stéphanie Bonnet, Anthony Soive, Diagnobéton (2023)
Finite-element modeling of intermittent dynamic rupture in fault gouge using rate-and-state friction with flash heating, Shengduo Liu, Nadia Lapusta, Vito Rubino, Ares Rosakis, AGU Fall Meeting 2023 (2023)
Dynamics of flexible filaments in oscillatory shear flows, Francesco Bonacci, Brato Chakrabarti, David Saintillan, Olivia Du Roure, Anke Lindner, Journal of Fluid Mechanics, Vol. 955, number 161 (2023), doi:10.1017/jfm.2022.1040
Review of "Crack branching at low tip speeds: spilling the T", Elie Eid, Rian Seghir, Julien Réthoré, Anna Pandolfi (2023)
Modélisation de l’étalement des bétons autoplaçants par apprentissage automatique, Abdelhamid Hafidi, Benoit Hilloulin, Ilhame Harbouz, Louise Lemesre, Ahmed Loukili, Journées thématiques AUGC - Intelligence Artificielle / Journée IA 2023, Academic Journal of Civil Engineering (2023), doi:10.26168/ajce.41.2.7
Special Issue n°41, Proceeding of the 8th conference Diagnobéton 2023 - Nantes, France, Géraldine Villain, Mehdi Sbartaï, Eric Gennesseaux, Pierric Mora, Benoit Hilloulin, Academic Journal of Civil Engineering (2023)
Norme XP P94-065 – Sols : reconnaissance et essais - Hole Erosion Test - Principe et méthode d'essai en laboratoire pour la détermination des caractéristiques de résistance à l'érosion de conduit, Stéphane Bonelli, Nadia Benahmed, Christophe Chevalier, Didier Marot, Abdelwadoud Mehenni, Véronique Berche, Yasmina Boussafir, Nicolas Burchart, Delphine Jacqueline, Sylvie Nicaise, Jean-Christophe Pellez, Maxime Boucher, Rémi Beguin (2023)
Evolution of mechanical behavior of bone in regenerating rat calvaria through multiscale characterization., Ameni Zaouali, David Gloaguen, Valérie Geoffroy, Pierre-Antoine Dubos, Marie José Moya, Matthias Schwartzkopf, Tim Snow, Himadri S. Gupta, Olga Shebanova, Konrad Schneider, Baobao Chang, Baptiste Girault, 48ème Congrès de la Société de Biomécanique (2023)
Identification of natural killer markers associated with fatal outcome in COVID-19 patients, Nadine Tarantino, Elena Litvinova, Assia Samri, Cathia Soulié, Véronique Morin, Alice Rousseau, Karim Dorgham, Christophe Parizot, Olivia Bonduelle, Alexandra Beurton, Makoto Miyara, Pascale Ghillani, Julien Mayaux, Raphael Lhote, Jean-Marc Lacorte, Anne-Geneviève Marcelin, Zahir Amoura, Charles-Edouard Luyt, Guy Gorochov, Amélie Guihot, Vincent Vieillard, Frontiers in Cellular and Infection Microbiology, Vol. 13, number 167 (2023), doi:10.3389/fcimb.2023.1165756
Using artificial neural networks to model single bead geometries processed by laser-wire direct energy deposition, Reza Asadi, Antoine Queguineur, Aapo Ylä-Autio, Antti Martikkala, Olli Wiikinkoski, Hossein Mokhtarian, Iñigo Flores Ituarte, IOP Conference Series: Materials Science and Engineering, Vol. 1296, number 012005, issue 1 (2023), doi:10.1088/1757-899x/1296/1/012005
Monitoring du séchage de bétons au laitier par capteur noyé de résistivité en vue de l'estimation des propriétés de transport, Marie-Ange Eid, Géraldine Villain, Stéphanie Bonnet, Sérgio Palma Lopes, Academic Journal of Civil Engineering (2023), doi:10.26168/ajce.41.4.13
Évaluation des outils de simulation du microclimat urbain - SOLWEIG et ENVI-met, Lutete Merveil Muanda, Gal Csilla Viktoria, Delpech Philippe, Sabre Maeva, Nabil Issaadi, Vallerent Stéphanie, Musy Marjorie, Auline Rodler, Academic Journal of Civil Engineering (AJCE), Vol. Vol 41 issue 1 (2023)
Testing monitoring technologies on dynamic subsea power cables to detect mechanical failures, Antoine Maison, Mélanie Roulet, Issam Bencheikh, Younes Demmouche, Laurent Gaillet, Maud Franchet, Emmanuel Schaeffer, Cyril Lupi, Jean-Philippe Roques, Bertrand Bailleul, Jicable 2023 (2023)
Proposition d'une méthodologie de conception collaborative de logiciel d'écoconception – Cas de la filière voile de compétition en Bretagne, Lucas Jacquet, Charles Dufour, Yann Mace, Antoine Le Duigou, Olivier Kerbrat, S-MART 2023 : 18ème Colloque national S.mart (2023)
To what extent does decreasing the proportion of clinker in cement production effectively decrease its carbon footprint?, Imane Elkhaldi, Emmanuel Rozière, Ahmed Loukili, Materials Today: Proceedings, Vol. 121, issue 8, pp. 455-460 (2023), doi:10.1016/j.matpr.2023.07.349
Effect of the structuration rate on dimensional stability and mechanical performance of 3D printed mortars, Ilhame Harbouz, Emmanuel Rozière, Ahmed Loukili, Ammar Yahia, Materials Today: Proceedings, Vol. 121, issue 13, pp. 370-375 (2023), doi:10.1016/j.matpr.2023.07.231
Industrial IoT system for laser-wire direct energy deposition: data collection and visualization of manufacturing process signals, Antti Martikkala, Olli Wiikinkoski, Reza Asadi, Antoine Queguineur, Aapo Ylä-Autio, Iñigo Flores Ituarte, IOP Conference Series: Materials Science and Engineering, Vol. 1296, number 012006, issue 1 (2023), doi:10.1088/1757-899x/1296/1/012006
Multi ionic penetration in Slag or Fly Ash Cementitious Matrices: Mechanisms and Modelling, Gayelle Fahed, Anthony Soive, Stéphanie Bonnet, 6th International Workshop on Mechanisms and Modelling of Waste / Cement Interactions (2023)
Comparaison fréquentielle d’une sonde et d’une cellule électromagnétiques à différents états hydriques et salins de deux bétons à base de CEM I et de CEM III, Myriam Bouichou, Géraldine Villain, Elisabeth Marie-Victoire, Khodor El Achrafi, Xavier Dérobert, Véronique Bouteiller, Academic Journal of Civil Engineering (2023), doi:10.26168/ajce.41.4.4
Modélisation de la corrosion par piqûre des ouvrages maritimes en béton armé : prise en compte de la variabilité spatiale et des données d'inspection, Romain Clerc, Franck Schoefs, Charbel-Pierre El-Soueidy, Academic Journal of Civil Engineering, Vol. 41, Academic Journal of Civil Engineering (2023), doi:10.26168/ajce.41.4.26
Robustness of the Data-Driven Identification algorithm with incomplete input data, Marie Dalémat, Michel Coret, Adrien Leygue, Erwan Verron, Journal of Theoretical, Computational and Applied Mechanics (2023), doi:10.46298/jtcam.12590
Fracture in viscoelasticity: comparison of a phase field and a lip field approach, Rajasekar Gopalsamy, Nicolas Chevaugeon, Olivier Chupin, Ferhat Hammoum, 7th International Conference on Computational Modeling of Fracture and Failure of Materials and Structure (CFRAC 2023), pp. 232 (2023)
MEALOR II Damage Mechanics and Local Approach to Fracture, Jacques Besson, Jérémy Bleyer, Sylvia Feld-Payet, Anne-Françoise Gourgues-Lorenzon, Florent Hannard, Thomas Helfer, Jeremy Hure, Djimedo Kondo, Veronique Lazarus, Christophe Le Bourlot, Habibou Maitournam, Corrado Maurini, Nicolas Moes, Thilo Morgeneyer, Léo Morin, Tom Petit, Aude Simar, CERN - European Organization for Nuclear Research (2023), doi:10.5281/zenodo.10125170
Micro-mechanics and machine learning based approach for the prediction of tensile strength of cementitious materials, Jinane Murr, Syed Yasir Alam, Frederic Grondin, Congrès Français du Génie Civil CFGC 2023, Vol. 41, pp. 546-555 (2023), doi:10.26168/ajce.41.1.54
Transport des ions chlorure dans les bétons soumis au marnage : modélisation et étude de sensibilité, Nicolas Reuge, François Bignonnet, Stéphanie Bonnet, Academic Journal of Civil Engineering, Vol. 41, pp. 196-206, Academic Journal of Civil Engineering (2023), doi:10.26168/ajce.41.1.20
Shock Degradation Process to Assess the Reliability of Bridges Subjected to Scouring and Climate Change, Bassel Habeeb, Emilio Bastidas-Arteaga, Boulent Imam, Erwan Liberge, 14th International Conference on Applications of Statistics and Probability in Civil Engineering, ICASP14 (2023), doi:10.5281/zenodo.10495276
Review of “A complete phase-field fracture model for brittle materials subjected to thermal shocks”, Bo Zeng, John Dolbow, Julien Réthoré (2023)
3D study of overload effects on fatigue crack growth through X-ray tomography andimage correlation, 3D study of overload effects on fatigue crack growth through X-ray tomography and image correlation, Lucas Sanciet--Munier, Nathalie Limodin, Jean-Yves Buffiere, Jean-Francois Witz, Julien Réthoré, Michel Coret, Ghita Filali, Yves Gaillard, Michel Fleuriot, Anne Bonnin, Goran Lovric, Andrew King, J. Lachambre, Arnaud Weck, 17th International Conference on Advances in Experimental Mechanics, Fatigue Design (2023)
Multiscale modeling of inelastic materials with Thermodynamics-based Artificial Neural Networks (TANN), Filippo Masi, Ioannis Stefanou, Computer Methods in Applied Mechanics and Engineering, Vol. 398, number 115190, issue 7 (2022), doi:10.1016/j.cma.2022.115190
Production, characteristics, and utilization of rice husk ash in alkali activated materials: An overview of fresh and hardened state properties, Shaswat Kumar Das, Adeolu Adediran, Cyriaque Rodrigue Kaze, Syed Mohammed Mustakim, Nordine Leklou, Construction and Building Materials, Vol. 345, number 128341 (2022), doi:10.1016/j.conbuildmat.2022.128341
Residual-based adaptivity for two-phase flow simulation in porous media using Physics-informed Neural Networks, John M. Hanna, José V. Aguado, Sebastien Comas-Cardona, Ramzi Askri, Domenico Borzacchiello, Computer Methods in Applied Mechanics and Engineering, Vol. 396, number 115100, issue 11 (2022), doi:10.1016/j.cma.2022.115100
Using machine learning techniques for predicting autogenous shrinkage of concrete incorporating superabsorbent polymers and supplementary cementitious materials, Benoît Hilloulin, Van Quan Tran, Journal of Building Engineering, Vol. 49, number 104086 (2022), doi:10.1016/j.jobe.2022.104086
Accelerated carbonation of recycled concrete aggregates: Investigation on the microstructure and transport properties at cement paste and mortar scales, Farah Kaddah, Harifidy Ranaivomanana, Ouali Amiri, Emmanuel Rozière, Journal of Co2 Utilization, Vol. 57, number 101885, issue July (2022), doi:10.1016/j.jcou.2022.101885
DIC Challenge 2.0: Developing Images and Guidelines for Evaluating Accuracy and Resolution of 2D Analyses: Focus on the Metrological Efficiency Indicator, P. L. Reu, B. Blaysat, E. Andó, K. Bhattacharya, C. Couture, V. Couty, D. Deb, S. S. Fayad, M. A. Iadicola, S. Jaminion, M. Klein, A. K. Landauer, P. Lava, M. Liu, L. K. Luan, S. N. Olufsen, J. Réthoré, E. Roubin, D. T. Seidl, T. Siebert, O. Stamati, E. Toussaint, D. Turner, C. S.R. Vemulapati, T. Weikert, J. F. Witz, O. Witzel, J. Yang, Experimental Mechanics, Vol. 62, issue 4, pp. 639-654 (2022), doi:10.1007/s11340-021-00806-6
29Si and 27Al MAS NMR spectroscopic studies of activated metakaolin-slag mixtures, Faten Souayfan, Emmanuel Rozière, Michaël Paris, Dimitri Deneele, Ahmed Loukili, Christophe Justino, Construction and Building Materials, Vol. 322, number 126415, issue 17 (2022), doi:10.1016/j.conbuildmat.2022.126415
The FastCarb project: Taking advantage of the accelerated carbonation of recycled concrete aggregates, Jean Michel Torrenti, Ouali Amiri, Laury Barnes-Davin, Frédéric Bougrain, Sandrine Braymand, Bogdan Cazacliu, Johan Colin, Amaury Cudeville, Patrick Dangla, Assia Djerbi, Mathilde Doutreleau, Adelaïde Feraille, Marielle Gueguen, Xavier Guillot, Yunlu Hou, Laurent Izoret, Yvan Pierre Jacob, Jena Jeong, Jean David Lau Hiu Hoong, Pierre Yves Mahieux, Jonathan Mai-Nhu, Heriberto Martinez, Vincent Meyer, Vincent Morin, Thomas Pernin, Jean Marc Potier, Laurent Poulizac, Patrick Rougeau, Myriam Saadé, Lucie Schmitt, Thierry Sedran, Marie Sereng, Anthony Soive, Glaydson Symoes Dos Reys, Philippe Turcry, Case Studies in Construction Materials, Vol. 17, number e01349, issue 5 (2022), doi:10.1016/j.cscm.2022.e01349
Establishing flow stress behaviour of Ti-6Al-4V alloy and development of constitutive models using Johnson-Cook method and Artificial Neural Network for quasi-static and dynamic loading, S. Deb, A. Muraleedharan, R. J. Immanuel, S. K. Panigrahi, G. Racineux, S. Marya, Theoretical and Applied Fracture Mechanics, Vol. 119, number 103338 (2022), doi:10.1016/j.tafmec.2022.103338
Compensation of the negative effects of micro-encapsulated phase change materials by incorporating metakaolin in geopolymers based on blast furnace slag, Bouha El Moustapha, Stéphanie Bonnet, Abdelhafid Khelidj, Nordine Leklou, Daniel Froelich, Isselmou Ahmedou Babah, Carole Charbuillet, Abderahmane Khalifa, Construction and Building Materials, Vol. 314, number 125556, issue 4 (2022), doi:10.1016/j.conbuildmat.2021.125556
Investigation of microstructure, hardness and residual stresses of wire and arc additive manufactured 6061 aluminium alloy, Gautier Doumenc, Laurent Couturier, Bruno Courant, Pascal Paillard, Alexandre Benoit, Eric Gautron, B. Girault, Thilo Pirling, Sandra Cabeza, David Gloaguen, Materialia, Vol. 25, number 101520 (2022), doi:10.1016/j.mtla.2022.101520
Assessment of the reactivity and hydration of Portland cement clinker phases from atomistic simulation: A critical review, Jérôme Claverie, Qianqian Wang, Siham Kamali-Bernard, Fabrice Bernard, Cement and Concrete Research, Vol. 154, number 106711, issue 7 (2022), doi:10.1016/j.cemconres.2022.106711
Comparison of numerical approaches for structural response analysis of passenger ships in collisions and groundings, Sang Jin Kim, Ghalib Taimuri, Pentti Kujala, Fabien Conti, Hervé Le Sourne, Jean Philippe Pineau, Thibaut Looten, Hongseok Bae, M. P. Mujeeb-Ahmed, Dracos Vassalos, Levent Kaydihan, Spyros Hirdaris, Marine Structures, Vol. 81, number 103125, issue 3 (2022), doi:10.1016/j.marstruc.2021.103125
Experimental evaluation of the effect of cement type and seawater salinity on concrete offshore structures, Marinelle El-Khoury, Emmanuel Roziere, Frederic Grondin, Rachid Cortas, Fadi Hage Chehade, Construction and Building Materials, Vol. 322, number 126471, issue 152 (2022), doi:10.1016/j.conbuildmat.2022.126471
Durability assessment of the oldest concrete structure in the Mediterranean coastline: The Ghazaouet harbour, Brahim Touil, Fouad Ghomari, Abdelhafid Khelidj, Stéphanie Bonnet, Ouali Amiri, Marine Structures, Vol. 81, number 103121, issue 111 (2022), doi:10.1016/j.marstruc.2021.103121
A hybrid method for determination of fatigue limit and non-destructive evaluation of composite structures after low-velocity impact loading, Andrzej Katunin, Ivanna Pivdiablyk, Laurent Gornet, Patrick Rozycki, Composites Part B Engineering, Vol. 238, number 109898 (2022), doi:10.1016/j.compositesb.2022.109898
Dynamic analysis of a monopile-supported offshore wind turbine considering the soil-foundation-structure interaction, Philip Alkhoury, Abdul Hamid Soubra, Valentine Rey, Mourad Aït-Ahmed, Soil Dynamics and Earthquake Engineering, Vol. 158, number 107281, issue 3 (2022), doi:10.1016/j.soildyn.2022.107281
Investigating the Effects of Climate Change on Structural Actions, André Orcesi, Alan O’Connor, Dimitris Diamantidis, Miroslav Sykora, Teng Wu, Mitsuyoshi Akiyama, Abdul Kadir Alhamid, Franziska Schmidt, Maria Pregnolato, Yue Li, Babak Salarieh, Abdullahi M. Salman, Emilio Bastidas-Arteaga, Olga Markogiannaki, Franck Schoefs, Structural Engineering International, Vol. 32, issue 4, pp. 563-576 (2022), doi:10.1080/10168664.2022.2098894
Vibration reduction of monopile-supported offshore wind turbines based on finite element structural analysis and active control, Philip Alkhoury, Mourad Aït-Ahmed, Abdul Hamid Soubra, Valentine Rey, Ocean Engineering, Vol. 263, number 112234, issue 3 (2022), doi:10.1016/j.oceaneng.2022.112234
Modular deep learning segmentation algorithm for concrete microscopic images, Benoit Hilloulin, Imane Bekrine, Emmanuel Schmitt, Ahmed Loukili, Construction and Building Materials, Vol. 349, number 128736, issue 7 (2022), doi:10.1016/j.conbuildmat.2022.128736
Towards global indicator of durability performance and carbon footprint of clinker-slag-limestone cement-based concrete exposed to carbonation, Imane Elkhaldi, Emmanuel Roziere, Philippe Turcry, Ahmed Loukili, Journal of Cleaner Production, Vol. 380, number 134876 (2022), doi:10.1016/j.jclepro.2022.134876
Evaluation of Hydrodynamic Force Coefficients in Presence of Biofouling on Marine/Offshore Structures, a Review and New Approach, Franck Schoefs, Arash Bakhtiari, Hamed Ameryoun, Journal of Marine Science and Engineering, Vol. 10, number 558, issue 5 (2022), doi:10.3390/jmse10050558
Investigating the Effects of Climate Change on Material Properties and Structural Performance, Andre Orcesi, Alan O'Connor, Emilio Bastidas-Arteaga, Mark G. Stewart, Boulent Imam, Katerina Kreislova, Franck Schoefs, Olga Markogiannaki, Teng Wu, Yue Li, Abdullahi Salman, Lara Hawchar, Paraic C. Ryan, Structural Engineering International, Vol. 32, issue 4, pp. 577-588 (2022), doi:10.1080/10168664.2022.2107468
Probability-based maintenance modeling and planning for reinforced concrete assets subjected to chloride ingress, Quynh Chau Truong, Charbel Pierre El Soueidy, Yue Li, Emilio Bastidas-Arteaga, Journal of Building Engineering, Vol. 54, number 104675, issue 4 (2022), doi:10.1016/j.jobe.2022.104675
Numerical analysis of internal erosion impact on underground structures: Application to tunnel leakage, Jie Yang, Zhen Yu Yin, Farid Laouafa, Pierre Yves Hicher, Geomechanics for Energy and the Environment, Vol. 31, number 100378, issue 3 (2022), doi:10.1016/j.gete.2022.100378
Experimental study of two kinds of hard marine growth effects on the hydrodynamic behavior of a cylinder submitted to wave and current loading, A. Marty, F. Schoefs, G. Damblans, J. V. Facq, B. Gaurier, G. Germain, Ocean Engineering, Vol. 263, number 112194, issue 5 (2022), doi:10.1016/j.oceaneng.2022.112194
Internal erosion by suffusion on cohesionless gap-graded soils: Model and sensibility analysis, Rachel Gelet, Didier Marot, Geomechanics for Energy and the Environment, Vol. 31, number 100313, issue 9 (2022), doi:10.1016/j.gete.2022.100313
Dynamic ultimate strength of a ultra-large container ship subjected to realistic loading scenarios, George Jagite, Fabien Bigot, Sime Malenica, Quentin Derbanne, Herve Le Sourne, Patrice Cartraud, Marine Structures, Vol. 84, number 103197, issue 4 (2022), doi:10.1016/j.marstruc.2022.103197
Printability assessment of cement-based materials based on rheology, hydration kinetics, and viscoelastic properties, Ilhame Harbouz, Emmanuel Roziere, Ammar Yahia, Ahmed Loukili, Construction and Building Materials, Vol. 325, number 126810, issue 3 (2022), doi:10.1016/j.conbuildmat.2022.126810
Experimental Characterization of Raw Earth Properties for Modeling Their Hygrothermal Behavior, Yassine Elias Belarbi, Mohamed Sawadogo, Philippe Poullain, Nabil Issaadi, Ameur El Amine Hamami, Stéphanie Bonnet, Rafik Belarbi, Buildings, Vol. 12, number 648, issue 5 (2022), doi:10.3390/buildings12050648
Water ageing effects on the elastic and viscoelastic behaviour of epoxy-based materials used in marine environment, Q. Dezulier, A. Clement, P. Davies, M. Arhant, B. Flageul, F. Jacquemin, Composites Part B Engineering, Vol. 242, number 110090, issue 1 (2022), doi:10.1016/j.compositesb.2022.110090
Fracture Behavior of Long Fiber Reinforced Geopolymer Composites at Different Operating Temperatures, Kinga Korniejenko, Beata Figiela, Celina Ziejewska, Joanna Marczyk, Patrycja Bazan, Marek Hebda, Marta Choińska, Wei Ting Lin, Materials, Vol. 15, number 482, issue 2 (2022), doi:10.3390/ma15020482
Matching of corroded defects in onshore pipelines based on In-Line Inspections and Voronoi partitions, Rafael Amaya-Gómez, Franck Schoefs, Mauricio Sánchez-Silva, Felipe Muñoz, Emilio Bastidas-Arteaga, Reliability Engineering and System Safety, Vol. 223, number 108520, issue 4 (2022), doi:10.1016/j.ress.2022.108520
Reliability Updating of Offshore Structures Subjected to Marine Growth, Franck Schoefs, Thanh Binh Tran, Energies, Vol. 15, number 414, issue 2 (2022), doi:10.3390/en15020414
A new methodology to predict moisture effects on mechanical behaviors of GFRP-BALSA sandwich by acoustic emission and infrared thermography, Yuan Wu, Marie Laetitia Pastor, Marianne Perrin, Pascal Casari, Xiaojing Gong, Composite Structures, Vol. 287, number 115342, issue 1 (2022), doi:10.1016/j.compstruct.2022.115342
The role of viscous regularization in dynamical problems, strain localization and mesh dependency, Alexandros Stathas, Ioannis Stefanou, Computer Methods in Applied Mechanics and Engineering, Vol. 388, number 114185, issue January 1976 (2022), doi:10.1016/j.cma.2021.114185
A comparison of post-processing techniques for Additive Manufacturing components, Matthieu Rauch, Jean Yves Hascoet, Procedia CIRP, Procedia CIRP, Vol. 108, pp. 442-447 (2022), doi:10.1016/j.procir.2022.03.069
Quasi-Periodic Lattices: pattern matters too, Quasi-periodic lattices: Pattern matters too, Audrey Somera, Martin Poncelet, Nicolas Auffray, Julien Réthoré, Scripta Materialia, Vol. 209, number 114378 (2022), doi:10.1016/j.scriptamat.2021.114378
Numerical analysis of slope collapse using SPH and the SIMSAND critical state model, Zhao Lu, Zhuang Jin, Panagiotis Kotronis, Journal of Rock Mechanics and Geotechnical Engineering, Vol. 14, issue 1, pp. 169-179 (2022), doi:10.1016/j.jrmge.2021.03.009
Assessment of the natural variability of cob buildings hygric and thermal properties at material scale: Influence of plants add-ons, Junior Tchiotsop, Nabil Issaadi, Philippe Poullain, Stéphanie Bonnet, Rafik Belarbi, Construction and Building Materials, Vol. 342, number 127922, issue 5 (2022), doi:10.1016/j.conbuildmat.2022.127922
Mechanical model for the analysis of ship collisions against reinforced concrete floaters of offshore wind turbines, Lucas Márquez, Hervé Le Sourne, Philippe Rigo, Ocean Engineering, Vol. 261, number 111987, issue 6 (2022), doi:10.1016/j.oceaneng.2022.111987
The degradation of gelatin/alginate/fibrin hydrogels is cell type dependent and can be modulated by targeting fibrinolysis, Elea Boucard, Luciano Vidal, Flora Coulon, Carlos Mota, Jean Yves Hascoët, Franck Halary, Frontiers in Bioengineering and Biotechnology, Vol. 10, number 3261 (2022), doi:10.3389/fbioe.2022.920929
Combination effect of limestone filler and slag on hydration reactions in ternary cements, Walid Deboucha, Nordine Leklou, Abdelhafid Khelidj, European Journal of Environmental and Civil Engineering, Vol. 26, issue 9, pp. 3931-3946 (2022), doi:10.1080/19648189.2020.1825233
Lifespan dynamics of cluster conformations in stationary regimes in granular materials, Na Deng, Antoine Wautier, Antoinette Tordesillas, Yannick Thiery, Zhen Yu Yin, Pierre Yves Hicher, François Nicot, Physical Review E, Vol. 105, number 13, issue 1 (2022), doi:10.1103/PhysRevE.105.014902
Effect of microstructural length scales on crack propagation in elastic Cosserat media, Soukaina Riad, Didier Bardel, Julien Réthoré, Engineering Fracture Mechanics, Vol. 267, number 108399, issue 1 (2022), doi:10.1016/j.engfracmech.2022.108399
Effect of recycled concrete aggregates and recycled filler on delayed ettringite formation: An experimental study compared to chemical modelling, Alexandre Yammine, Mahmoud Hamdadou, Nordine Leklou, François Bignonnet, Marta Choinska-Colombel, Cement and Concrete Composites, Vol. 132, number 104636, issue 2 (2022), doi:10.1016/j.cemconcomp.2022.104636
Creation and application of future typical weather files in the evaluation of indoor overheating in free-floating buildings, Obaidullah Yaqubi, Auline Rodler, Sihem Guernouti, Marjorie Musy, Building and Environment, Vol. 216, number 109059, issue 7772 (2022), doi:10.1016/j.buildenv.2022.109059
Foamed Eco-Geopolymer Modified by Perlite and Cellulose as a Construction Material for Energy-Efficient Buildings, Izabela Kurek, Emilia Florek, Weronika Gozdur, Celina Ziejewska, Joanna Marczyk, Michał Łach, Kinga Korniejenko, Patrycja Duży, Marta Choińska, Magdalena Szechyńska-Hebda, Marek Hebda, Energies, Vol. 15, number 4297, issue 12 (2022), doi:10.3390/en15124297
Numerical simulation of strain-softening behavior of glass-filled polymer composites: Comparison of two-dimensional and three-dimensional analyses using Arruda-Boyce and Three-Network viscoplastic models, Siddharth Kumar, Sarthak S. Singh, Patrick Rozycki, Mechanics of Materials, Vol. 175, number 104481, issue 6 (2022), doi:10.1016/j.mechmat.2022.104481
Inelastic response of thermo-oxidatively aged carbon black filled polychloroprene rubber. Part I: Viscoelasticity, M. I. Kittur, A. Andriyana, B. C. Ang, S. Y. Ch'ng, E. Verron, Polymer Degradation and Stability, Vol. 205, number 110118 (2022), doi:10.1016/j.polymdegradstab.2022.110118
Graph Neural Network Based Surrogate Model of Physics Simulations for Geometry Design, Jian Cheng Wong, Chin Chun Ooi, Joyjit Chattoraj, Lucas Lestandi, Guoying Dong, Umesh Kizhakkinan, David William Rosen, Mark Hyunpong Jhon, My Ha Dao, Proceedings of the 2022 IEEE Symposium Series on Computational Intelligence Ssci 2022, pp. 1469-1475, ISBN:[9781665487689] (2022), doi:10.1109/SSCI51031.2022.10022022
Freeze–thaw field exposure and testing the reliability of performance test temperature cycle for concrete scaling in presence of de-icing salts, Sara Al Haj Sleiman, Laurent Izoret, Syed Yasir Alam, Frederic Grondin, Ahmed Loukili, Materials and Structures Materiaux Et Constructions, Vol. 55, number 1613, issue 1 (2022), doi:10.1617/s11527-021-01831-6
Digital chain for pelvic tumor resection with 3D-printed surgical cutting guides, Vincent Biscaccianti, Henri Fragnaud, Jean Yves Hascoët, Vincent Crenn, Luciano Vidal, Frontiers in Bioengineering and Biotechnology, Vol. 10, number 187 (2022), doi:10.3389/fbioe.2022.991676
Effect of Stress Level on the Microstructural Evolution of Clay under Creep, Dan Zhao, Mahdia Hattab, Pierre Yves Hicher, Zhen Yu Yin, Journal of Engineering Mechanics, Vol. 148, number 365, issue 2 (2022), doi:10.1061/(ASCE)EM.1943-7889.0002070
Assessment of hygrothermal and mechanical performance of alkali activated Borassus fiber reinforced earth-based bio-composite, Assia Aboubakar Mahamat, Nordine Leklou, Ifeyinwa Ijeoma Obianyo, Philippe Poullain, Tido Tiwa Stanislas, Olugbenga Ayeni, Numfor Linda Bih, Holmer Savastano, Journal of Building Engineering, Vol. 62, number 105411, issue 14 (2022), doi:10.1016/j.jobe.2022.105411
Preventing Instabilities and Inducing Controlled, Slow-Slip in Frictionally Unstable Systems, Ioannis Stefanou, Georgios Tzortzopoulos, Journal of Geophysical Research Solid Earth, Vol. 127, number 55, issue 7 (2022), doi:10.1029/2021JB023410
Lipschitz regularization for fracture: The Lip-field approach, N. Chevaugeon, N. Moës, Computer Methods in Applied Mechanics and Engineering, Vol. 402, number 115644, issue 5 (2022), doi:10.1016/j.cma.2022.115644
Non-parametric stress field estimation for history-dependent materials: Application to ductile material exhibiting Piobert–Lüders localization bands, Raphaël Langlois, Michel Coret, Julien Réthoré, Strain, Vol. 58, number 1, issue 4 (2022), doi:10.1111/str.12410
Inelastic response of thermo-oxidatively aged carbon black filled polychloroprene rubber. Part II: Mullins effect, M. I. Kittur, A. Andriyana, B. C. Ang, S. Y. Ch'ng, E. Verron, Polymer Degradation and Stability, Vol. 204, number 110120 (2022), doi:10.1016/j.polymdegradstab.2022.110120
Thermal Characterization and Thermal Effect Assessment of Biofouling around a Dynamic Submarine Electrical Cable, Ziad Maksassi, Bertrand Garnier, Ahmed Ould El Moctar, Franck Schoefs, Emmanuel Schaeffer, Energies, Vol. 15, number 3087, issue 9 (2022), doi:10.3390/en15093087
A fast simulation tool for ship grounding damage analysis, Jean Philippe Pineau, Fabien Conti, Hervé Le Sourne, Thibaut Looten, Ocean Engineering, Vol. 262, number 112248, issue 4 (2022), doi:10.1016/j.oceaneng.2022.112248
Mechanical Strength and Chloride Ions’ Penetration of Alkali-Activated Concretes (AAC) with Blended Precursor, Patrycja Duży, Marta Choinska, Izabela Hager, Ouali Amiri, Jérôme Claverie, Materials, Vol. 15, number 4475, issue 13 (2022), doi:10.3390/ma15134475
Water jet incremental sheet metal forming: a critical state-of-the-art review and a proposal for technological windows, Mathieu Miroir, Romain Laniel, Antoine Brient, Olivier Kerbrat, International Journal of Advanced Manufacturing Technology, Vol. 119, issue 7-8, pp. 4159-4175 (2022), doi:10.1007/s00170-021-08635-6
Analytical Estimation of Electromagnetic Pressure, Flyer Impact Velocity, and Welded Joint Length in Magnetic Pulse Welding, Rishabh Shotri, Koen Faes, Guillaume Racineux, Amitava De, Metals, Vol. 12, number 276, issue 2 (2022), doi:10.3390/met12020276
Understanding the effect of hygroscopic cycling on the internal stress and stiffness of natural fibre biocomposites, V. Popineau, A. Célino, M. Péron, C. Baley, A. Le Duigou, Composites Part A Applied Science and Manufacturing, Vol. 158, number 106995, issue 3 (2022), doi:10.1016/j.compositesa.2022.106995
The Influence of Chemical and Thermal Treatments on the Diss Fiber Hygroscopic Behaviors, Mustapha Nouri, Mahfoud Tahlaiti, Fréderic Grondin, Rafik Belarbi, Journal of Natural Fibers, Vol. 19, issue 10, pp. 3865-3878 (2022), doi:10.1080/15440478.2020.1848733
A two-dimensional formulation for the homogenization of helical beam-like structures under bending loads, Fabien Treyssède, Patrice Cartraud, International Journal of Solids and Structures, Vol. 234-235, number 111270 (2022), doi:10.1016/j.ijsolstr.2021.111270
Mechanical and thermal modification of mordenite-rich tuff and its effect on cement pastes, Meriem Meziani, Nordine Leklou, Nasser Chelouah, Ouali Amiri, Construction and Building Materials, Vol. 318, number 126008, issue 2 (2022), doi:10.1016/j.conbuildmat.2021.126008
Design and numerical modelling strategy to form Tailored Fibre Placement preforms: Application to the tetrahedral part with orthotropic final configuration, J. Simon, N. Hamila, C. Binetruy, S. Comas-Cardona, B. Masseteau, Composites Part A Applied Science and Manufacturing, Vol. 158, number 106952, issue 5 (2022), doi:10.1016/j.compositesa.2022.106952
OPENING NEW OPPORTUNITIES FOR AERONAUTIC, NAVAL AND TRAIN LARGE COMPONENTS REALIZATION WITH HYBRID AND TWIN MANUFACTURING, M. Rauch, J. Y. Hascoet, Journal of Machine Engineering, Vol. 22 (2022), doi:10.36897/jme/155812
A simplified approach to assess the resistance of a ship sliding on elliptic paraboloïd rock, Jean Philippe Pineau, Hervé Le Sourne, Marine Structures, Vol. 83, number 103151, issue June 2018 (2022), doi:10.1016/j.marstruc.2021.103151
Undrained monotonic and cyclic behavior of a stiff fissured overconsolidated clay, Jian Han, Zhen Yu Yin, Christophe Dano, Pierre Yves Hicher, Engineering Geology, Vol. 302, number 106627, issue GT5 (2022), doi:10.1016/j.enggeo.2022.106627
ε–greedy automated indentation of cementitious materials for phase mechanical properties determination, B. Hilloulin, M. Lagrange, M. Duvillard, G. Garioud, Cement and Concrete Composites, Vol. 129, number 104465 (2022), doi:10.1016/j.cemconcomp.2022.104465
An efficient matrix-free preconditioned conjugate gradient based multigrid method for phase field modeling of fracture in heterogeneous materials from 3D images, Xiaodong Liu, Julien Réthoré, Antonius Adrianus Lubrecht, Computer Methods in Applied Mechanics and Engineering, Vol. 388, number 114266, issue 4821 (2022), doi:10.1016/j.cma.2021.114266
Effects on cavitation inception of leading and trailing edge flaps on a high-performance hydrofoil, Fatiha Mohammed Arab, Benoît Augier, François Deniset, Pascal Casari, Jacques André Astolfi, Applied Ocean Research, Vol. 126, number 103285, issue 12 (2022), doi:10.1016/j.apor.2022.103285
A new design for additive manufacturing method: applied on the bound metal deposition process, Mohamed Akram Mechter, Yann Mace, Olivier Kerbrat, Journal of Engineering Design, Vol. 33, issue 10, pp. 787-810 (2022), doi:10.1080/09544828.2022.2136478
Modeling of Hysteretic Behavior of Soil–Water Retention Curves Using an Original Pore Network Model, Harifidy Ranaivomanana, Geetanjali Das, Andry Razakamanantsoa, Transport in Porous Media, Vol. 142, issue 3, pp. 559-584 (2022), doi:10.1007/s11242-022-01759-7
Open-source deep learning-based air-void detection algorithm for concrete microscopic images, B. Hilloulin, I. Bekrine, E. Schmitt, A. Loukili, Journal of Microscopy, Vol. 286, issue 2, pp. 179-184 (2022), doi:10.1111/jmi.13098
Graded damage in quasi-brittle solids, Nunziante Valoroso, Claude Stolz, International Journal for Numerical Methods in Engineering, Vol. 123, issue 11, pp. 2467-2498 (2022), doi:10.1002/nme.6947
A phase field model for partially saturated geomaterials describing fluid–fluid displacements. Part I: The model and one-dimensional analysis, Siddhartha H. Ommi, Giulio Sciarra, Panagiotis Kotronis, Advances in Water Resources, Vol. 164, number 104170, issue 5 (2022), doi:10.1016/j.advwatres.2022.104170
Method of characterizing the interphase’s mean water diffusion properties of a bonded assembly in immersion, Romain Grangeat, M. Girard, F. Jacquemin, C. Lupi, Journal of Adhesion, Vol. 98, issue 3, pp. 207-226 (2022), doi:10.1080/00218464.2020.1828080
Fragmentation analysis of a bar with the Lip-field approach, Nicolas Moës, Benoît Lé, Andrew Stershic, Mechanics of Materials, Vol. 172, number 104365, issue 1 (2022), doi:10.1016/j.mechmat.2022.104365
Micromechanical schemes for Stokes to Darcy homogenization of permeability based on generalized Brinkman inhomogeneity problems, François Bignonnet, International Journal of Engineering Science, Vol. 172, number 103622, issue 3 (2022), doi:10.1016/j.ijengsci.2021.103622
Improved Coil Design for Magnetic Pulse Welding of Metallic Sheets, Rishabh Shotri, Koen Faes, Guillaume Racineux, Amitava De, Journal of Manufacturing and Materials Processing, Vol. 6, number 144, issue 6 (2022), doi:10.3390/jmmp6060144
A variational formulation of thermomechanical constitutive update for hyperbolic conservation laws, Thomas Heuzé, Laurent Stainier, Computer Methods in Applied Mechanics and Engineering, Vol. 394, number 114893, issue 1 (2022), doi:10.1016/j.cma.2022.114893
Aggregate size effects on the mechanical behaviour and on the gas permeability at damaged state of cement-based materials with and without slag, Aurélie Fabien, Marta Choinska, Stéphanie Bonnet, Arnaud Pertue, Abdelhafid Khelidj, European Journal of Environmental and Civil Engineering, Vol. 26, issue 12, pp. 5674-5695 (2022), doi:10.1080/19648189.2021.1915881
In-situ monitoring of micro-tunnel geometry change based on distributed optical fiber strain sensing, Arianna Piccolo, Yann Lecieux, Dominique Leduc, Sylvie Delepine-Lesoille, Frédéric Bumbieler, Béatrice Yven, Smart Materials and Structures, Vol. 31, number 025004, issue 2 (2022), doi:10.1088/1361-665X/ac40dc
A second gradient cohesive element for mode I crack propagation, Gwendal Jouan, Panagiotis Kotronis, Denis Caillerie, Frédéric Collin, Finite Elements in Analysis and Design, Vol. 204, number 103732, issue 30 (2022), doi:10.1016/j.finel.2022.103732
A computational approach based on extended finite element method for thin porous layers in acoustic problems, Shaoqi Wu, Olivier Dazel, Grégory Legrain, International Journal for Numerical Methods in Engineering, Vol. 123, issue 18, pp. 4209-4243 (2022), doi:10.1002/nme.7006
Hygrothermal and Microstructural Investigation of PLA and PLA-Flax Printed Structures, Yassine Elias Belarbi, Ferhat Benmahiddine, Ameur El Amine Hamami, Sofiane Guessasma, Sofiane Belhabib, Fibers, Vol. 10, number 24, issue 3 (2022), doi:10.3390/fib10030024
Robust Tracking for the Diffusion Equation using Sliding-Mode Boundary Control, Diego Gutierrez-Oribio, Yury Orlov, Ioannis Stefanou, Franck Plestan, Proceedings of the IEEE Conference on Decision and Control, Vol. 2022-December, pp. 6076-6081, ISBN:[9781665467612] (2022), doi:10.1109/CDC51059.2022.9992664
FEMU based identification of the creep behavior of Zircaloy-4 claddings under simulated RIA thermo-mechanical conditions, T. Jailin, N. Tardif, J. Desquines, P. Chaudet, M. Coret, M. C. Baietto, V. Georgenthum, Journal of Nuclear Materials, Vol. 561, number 153542, issue 2 (2022), doi:10.1016/j.jnucmat.2022.153542
Advances in Sliding Mode Control of Earthquakes via Boundary Tracking of Wave and Diffusion PDEs, Diego Gutiérrez-Oribio, Yury Orlov, Ioannis Stefanou, Franck Plestan, Proceedings of IEEE International Workshop on Variable Structure Systems, Vol. 2022-September, pp. 231-236, ISBN:[9781665463591] (2022), doi:10.1109/VSS57184.2022.9902111
A phase field model for partially saturated geomaterials describing fluid–fluid displacements, Part II: Stability analysis and two-dimensional simulations, Siddhartha H. Ommi, Giulio Sciarra, Panagiotis Kotronis, Advances in Water Resources, Vol. 164, number 104201, issue 5 (2022), doi:10.1016/j.advwatres.2022.104201
A numerical microscopically informed upscale approach for analyzing the reliability of testing method for concrete resistance to freeze-thaw, Sara Al Haj Sleiman, Abderrahmane Rhardane, Syed Yasir Alam, Frédéric Grondin, Ahmed Loukili, Laurent Izoret, Construction and Building Materials, Vol. 317, number 125772, issue 7 (2022), doi:10.1016/j.conbuildmat.2021.125772
Adhesive Strength of Modified Cement–Ash Mortars, Leonid Dvorkin, Patrycja Duży, Karolina Brudny, Marta Choińska, Kinga Korniejenko, Energies, Vol. 15, number 4229, issue 12 (2022), doi:10.3390/en15124229
Climate change indicators dataset for coastal locations of the European Atlantic area, Bassel Habeeb, Emilio Bastidas-Arteaga, Data in Brief, Vol. 43, number 108339 (2022), doi:10.1016/j.dib.2022.108339
Multi-criteria assessment of a high-performance glulam through numerical simulation, Wilberth G. Gomez-Ceballos, Mauricio Gamboa-Marrufo, Frédéric Grondin, Engineering Structures, Vol. 256, number 114021, issue 2 (2022), doi:10.1016/j.engstruct.2022.114021
Uncertainty of the virtual image correlation method, Marc Louis Maurice François, International Journal for Numerical Methods in Engineering, Vol. 123, issue 18, pp. 4367-4390 (2022), doi:10.1002/nme.7037
The role of surface micro-cracks in cementitious materials responsible for the Pickett effect, Abderrahmane Rhardane, Syed Yasir Alam, Frédéric Grondin, Mechanics of Time Dependent Materials, Vol. 26, issue 3, pp. 719-740 (2022), doi:10.1007/s11043-021-09509-w
3D interaction diagrams for symmetrically reinforced concrete square sections with various reinforcement ratios, Androniki Anna Doulgeroglou, Panagiotis Kotronis, Giulio Sciarra, Catherine Bouillon, Engineering Structures, Vol. 262, number 114272, issue 6 (2022), doi:10.1016/j.engstruct.2022.114272
Uses of Usumacinta River sediments as a sustainable resource for unpaved roads: An experimental study on a full-scale pilot unit, I. Djeran-Maigre, A. Morsel, L. Briançon, E. Delfosse, D. Levacher, A. R. Razakamanantsoa, Transportation Engineering, Vol. 9, number 100136, issue 3 (2022), doi:10.1016/j.treng.2022.100136
A plate theory for inflatable panels, Paul Lacorre, Anh Le van, Rabah Bouzidi, Jean Christophe Thomas, International Journal of Solids and Structures, Vol. 256, number 111969, issue 2 (2022), doi:10.1016/j.ijsolstr.2022.111969
A robust 3D crack growth method based on the eXtended Finite Element Method and the Fast Marching Method, M. Le Cren, A. Martin, P. Massin, N. Moës, International Journal of Fracture, Vol. 235, issue 2, pp. 243-265 (2022), doi:10.1007/s10704-022-00632-4
Effects of rubber aggregates on the physical-mechanical, thermal and durability properties of self-compacting sand concrete, Faisal Abdelrahman Hashem Saleh, Nouria Kaid, Kada Ayed, Djamel Eddine Kerdal, Nadjib Chioukh, Nordine Leklou, Frattura Ed Integrita Strutturale, Vol. 16, issue 61, pp. 89-107 (2022), doi:10.3221/IGF-ESIS.61.06
A SEMI-ANALYTICAL METHODOLOGY TO ASSESS THE DYNAMIC ELASTIC RESPONSE OF A MONOPILE OFFSHORE WIND TURBINE SUBJECTED TO LOW-ENERGY SHIP IMPACTS, Icaro Ladeira, Hervé Le Sourne, Jonathan Moran, Priscilla Salazar, Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering OMAE, Vol. 2, ISBN:[9780791885864] (2022), doi:10.1115/OMAE2022-79672
Derivation of the chain length distribution in crosslinked elastomers from thermoporometric literature data, Alice Gros, Bertrand Huneau, Erwan Verron, Thermochimica Acta, Vol. 718, number 179383, issue 23 (2022), doi:10.1016/j.tca.2022.179383
Numerical investigation for the effect of deformation and dynamic pressure on the fast drainage of porous materials, Yuliang Zou, Mazen Saad, Frédéric Grondin, European Journal of Environmental and Civil Engineering, Vol. 26, issue 13, pp. 6605-6624 (2022), doi:10.1080/19648189.2021.1951360
Modeling diffusive phase transformation and fracture in viscoplastic materials, Ethel Djeumen, Gergely Molnár, Nicolas Tardif, Michel Coret, Jean Desquines, Tatiana Taurines, Marie Christine Baietto, International Journal of Solids and Structures, Vol. 252, number 111757, issue 25 (2022), doi:10.1016/j.ijsolstr.2022.111757
Measuring both thermal and kinematic full-fields using a single CMOS camera during high temperature tests, T. Jailin, N. Tardif, P. Chaudet, J. Desquines, M. Coret, M. C. Baietto, V. Georgenthum, Optics and Lasers in Engineering, Vol. 158, number 107107, issue 6 (2022), doi:10.1016/j.optlaseng.2022.107107
Influence of waste tyre rubber of different aggregate forms and sizes on the sustainable behaviour of self-compacting sand concrete in aggressive environment, Faisal A.H. Saleh, Nouria Kaid, Kada Ayed, Djamel Eddine Kerdal, Nadjib Chioukh, Nordine Leklou, Journal of Rubber Research, Vol. 25, issue 2, pp. 89-104 (2022), doi:10.1007/s42464-022-00160-9
Thermodynamic difficulties to determine a critical chloride threshold for breakdown of the protective layer of steel reinforcement in a maritime concrete structure, Anthony Soive, Stéphanie Bonnet, Abdelhafid Khelidj, Véronique Baroghel-Bouny, Journal of Sustainable Cement Based Materials, Vol. 11, issue 5, pp. 308-318 (2022), doi:10.1080/21650373.2021.1961325
A multi-scale statistical description of stacks of non-cohesive thin particles, François Mahé, Christophe Binetruy, Suresh Advani, Julien Férec, Benedikt Eck, Powder Technology, Vol. 399, number 116988, issue 8 (2022), doi:10.1016/j.powtec.2021.11.032
Uncertainty Propagation of Structural Computation for Fatigue Assessment, Ludovic Mell, Valentine Rey, Franck Schoefs, Benjamin Rocher, Journal of Marine Science and Application, Vol. 21, issue 4, pp. 55-66 (2022), doi:10.1007/s11804-022-00300-y
A NOVEL SLICING STRATEGY FOR CONTINUOUS PRINTING WITH A HELIX 3D PRINTER, Tugdual Le Neel, Tarek Mesto, Jean Yves Hascoet, Journal of Machine Engineering, Vol. 22, pp. 31-43 (2022), doi:10.36897/jme/151119
Three-dimensional modelling of stress relaxation of soft clay under complex loading conditions, Jian Li, Dong Mei Zhang, Pierre Yves Hicher, Chang Fu Wei, European Journal of Environmental and Civil Engineering, Vol. 26, issue 7, pp. 2496-2508 (2022), doi:10.1080/19648189.2016.1232664
Non-uniqueness, stability and bifurcation analyses in elasto-viscoplastic boundary value problems with no inertia, Huan Wang, Panagiotis Kotronis, Giulio Sciarra, International Journal of Engineering Science, Vol. 177, number 103714, issue 4 (2022), doi:10.1016/j.ijengsci.2022.103714
Enhanced Modeling of Water Diffusion in Natural Fibers: Application to Diss Fibers, Mustapha Nouri, Mahfoud Tahlaiti, Abdelkader Meroufel, Fréderic Grondin, Journal of Natural Fibers, Vol. 19, issue 14, pp. 9259-9268 (2022), doi:10.1080/15440478.2021.1982817
Impact strength of thermally aged double lap adhesively bonded joints, Marleine Morcos, Georges Challita, Vincent Legrand, Khaled Khalil, Pascal Casari, International Journal of Adhesion and Adhesives, Vol. 112, number 103029, issue 1415 (2022), doi:10.1016/j.ijadhadh.2021.103029
Performance of chemical substance inhibitors on the surface between steel rebar and concrete, Ahmed Elshami, Stéphanie Bonnet, Abdelhafid Khelidj, Mohammad Farouk Abdelmagied, European Journal of Environmental and Civil Engineering, Vol. 26, issue 15, pp. 7553-7571 (2022), doi:10.1080/19648189.2021.2003251
Influence of the mechanical and geometrical parameters on the cellular uptake of nanoparticles: A stochastic approach, Sarah Iaquinta, Shahram Khazaie, Éléna Ishow, Christophe Blanquart, Sylvain Fréour, Frédéric Jacquemin, International Journal for Numerical Methods in Biomedical Engineering, Vol. 38, number 525, issue 6 (2022), doi:10.1002/cnm.3598
Ship collision events against reinforced concrete offshore structures, L. Márquez, P. Rigo, H. Le Sourne, Vol. 2022, pp. 245-253 (2022), doi:10.1201/9781003230373-29
Tracking for a Wave Equation Using Homogeneous Boundary Control, Diego Gutiérrez-Oribio, Yury Orlov, Ioannis Stefanou, Franck Plestan, 2022 European Control Conference Ecc 2022, pp. 963-968, ISBN:[9783907144077] (2022), doi:10.23919/ECC55457.2022.9838048
Relation between durability and mechanical properties on glass fiber reinforced slag-based geopolymer, Lais Alves, Nordine Leklou, Silvio de Barros, Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, Vol. 236, issue 7, pp. 1431-1442 (2022), doi:10.1177/14644207211043870
HYDRODYNAMIC EFFECTS OF SURFACE ROUGHNESS ON CYLINDERS: LITERATURE REVIEW AND RESEARCH GAPS, Maduka Maduka, Katherine Coughlan, Sanjay Arwade, Franck Schoefs, Alison Bates, Krish Thiagarajan, Proceedings of the ASME 2022 4th International Offshore Wind Technical Conference Iowtc2022, ISBN:[9780791886618] (2022), doi:10.1115/IOWTC2022-98886
Printability Assessment of Cement-Based Materials Using Uniaxial Compression Test, Ilhame Harbouz, Ammar Yahia, Emmanuel Rozière, Ahmed Loukili, Third RILEM International Conference on Concrete and Digital Fabrication, Vol. 37, pp. 318-323 (2022), doi:10.1007/978-3-031-06116-5_47
Whispering gallery modes for 3D strain measurement, Yann Lecieux, Dominique Leduc, Corentin Guigot, Marc François, Cyril Lupi, Optics and Laser Technology, Vol. 149, number 107862, issue 1226 (2022), doi:10.1016/j.optlastec.2022.107862
NOVEL ONE-DEGREE OF FREEDOM HELIX MACHINE ARCHITECTURE FOR ADDITIVE MANUFACTURING, Tugdual Le Neel, Jean Yves Hascoet, Journal of Machine Engineering, Vol. 22, pp. 5-18 (2022), doi:10.36897/jme/152244
Rapid assessment of ship bottom sliding on paraboloid shaped rock, J. P. Pineau, H. Le Sourne, Vol. 2022, pp. 254-261 (2022), doi:10.1201/9781003230373-30
Characterization shear properties of PVC foams instrumented by optical fiber under flexural loading, Karim Mharsi, Xavier Chapeleau, Jamal Fajoui, Amira Sellami, Pascal Casari, Mohamed Kchaou, Journal of Testing and Evaluation, Vol. 50, issue 4 (2022), doi:10.1520/JTE20200123
Summer Passive Strategies Assessment Based on Calibrated Building Model Using on Site Measurement Data, Obaidullah Yaqubi, Auline Rodler, Sihem Guernouti, Marjorie Musy, Building Simulation Conference Proceedings, pp. 1228-1235, ISBN:[9781775052029] (2022), doi:10.26868/25222708.2021.30226
Investigation of the Physical, Mechanical and Chemical Properties of the Marrow of Raffia Hookeri, Yves Roland Olembe, Christian B.O.P.D.A. Fokam, Théodore Tchotang, Rolland Djomi, Bienvenu Kenmeugne, Marc Louis Maurice François, Journal of Natural Fibers, Vol. 19, issue 14, pp. 8152-8164 (2022), doi:10.1080/15440478.2021.1961337
Robust Stabilization of Furuta's pendulum based on Continuous High Order Sliding Mode Controllers, J. Antonio Ortega, Diego Gutierrez-Oribio, Leonid Fridman, Jaime A. Moreno, Proceedings of the IEEE Conference on Decision and Control, Vol. 2022-December, pp. 525-530, ISBN:[9781665467612] (2022), doi:10.1109/CDC51059.2022.9992652
Analysis and visualization of traceless symmetric tensors. Application to the Hencky strain tensor for large strain tension–torsion, Etienne Le Mire, Erwan Verron, Bertrand Huneau, Nathan Selles, International Journal of Non Linear Mechanics, Vol. 145, number 104098, issue 5 (2022), doi:10.1016/j.ijnonlinmec.2022.104098
On the influence of buoyancy forces, failure strain and friction coefficient on the damage extent of a grounded ship, H. Le Sourne, J. P. Pineau, C. B. Umunnakwe, T. Wesoly, O. Dorival, Vol. 2022, pp. 229-235 (2022), doi:10.1201/9781003230373-27
Variational Approach to Damage Induced by Drainage in Partially Saturated Granular Geomaterials, Siddhartha H. Ommi, Giulio Sciarra, Panagiotis Kotronis, Frontiers in Mechanical Engineering, Vol. 8, number S283 (2022), doi:10.3389/fmech.2022.869568
Editorial: Hydromechanical Instabilities in Geomaterials: Advances in Numerical Modeling and Experimental Techniques, Giulio Sciarra, Gioacchino Viggiani, Frédéric Collin, Frontiers in Mechanical Engineering, Vol. 8, number 104201 (2022), doi:10.3389/fmech.2022.954665
Mechanical characterization of a piezoelectric sensor for podiatrist applications, Adrar Samia, El Gibari Mohammed, Menard Yoen, Tomas Jean-Christophe, Seveno Raynald, Syscon 2022 16th Annual IEEE International Systems Conference Proceedings, ISBN:[9781665439923] (2022), doi:10.1109/SysCon53536.2022.9773897
RAPID ASSESSMENT OF SHIP BOTTOM GROUNDING DAMAGE CONSIDERING COMBINED SURGE AND HEAVE MOTION, Jean Philippe Pineau, Hervé Le Sourne, Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering OMAE, Vol. 2, ISBN:[9780791885864] (2022), doi:10.1115/OMAE2022-80209
CHARACTERIZATION AND MODELING OF THE IMPREGNATION PROCESS OF ELECTRIC ENGINES' ROTORS WITH A REACTIVE THERMOSETTING RESIN, Amélie Moisya, Sébastien Comas-Cardona, Nicolas Désilles, Pascal Genevée, Jere Kolehmainen, Eccm 2022 Proceedings of the 20th European Conference on Composite Materials Composites Meet Sustainability, Vol. 4, pp. 411-418, ISBN:[9782970161400] (2022)
Optimizing Cover Rebuilding Maintenance for Reinforced Concrete Structures Exposed to Chloride Attack, Quynh Chau Truong, Charbel Pierre El Soueidy, Emilio Bastidas-Arteaga, Yue Li, Proceedings of the 1st Conference of the European Association on Quality Control of Bridges and Structures, Vol. 200 LNCE, pp. 148-156, ISBN:[9783030918767] (2022), doi:10.1007/978-3-030-91877-4_18
FIRST INSIGHTS FROM THE VIRTUAL PERMEABILITY BENCHMARK ON A FIBROUS MICROSTRUCTURE, Tim Schmidt, Elena Syerko, David May, Christophe Binetruy, Luisa Silva, Stepan V. Lomov, Suresh G. Advani, Eccm 2022 Proceedings of the 20th European Conference on Composite Materials Composites Meet Sustainability, Vol. 3, pp. 741-748, ISBN:[9782970161400] (2022)
Experiments, numerical models and optimization of carbon-epoxy plates damped by a frequency-dependent interleaved viscoelastic layer, R. Mateu Pastor, H. Le Sourne, E. Le Gal La Salle, P. Cartraud, Mechanics of Advanced Materials and Structures, Vol. 29, issue 21, pp. 3011-3029 (2022), doi:10.1080/15376494.2021.1882626
Sensitivity Analysis of a Concrete Structure Subjected to Cyclic Loading Using a Polynomial Chaos Expansion Method, Henriette Marlaine Imounga, Emilio Bastidas-Arteaga, Serge Ekomy Ango, Rostand Moutou Pitti, Conference Proceedings of the Society for Experimental Mechanics Series, pp. 111-115, ISBN:[9783030867409] (2022), doi:10.1007/978-3-030-86741-6_18
Flow stress improvement of a nickel multicrystal by physical vapor thin film deposition to reduce surface effects, Pierre Antoine Dubos, Ameni Zaouali, Pierre Yves Jouan, Mireille Richard-Plouet, Valerie Brien, David Gloaguen, Baptiste Girault, Materials Letters X, Vol. 14, number 100145, issue 16 (2022), doi:10.1016/j.mlblux.2022.100145
Some experiments inspired by the leptonic magnetic monopole of G. Lochak, G. de Lacheze-Murel, D. Fargue, C. Daviau, M. Karatchentzeff, A. Marizy, D. Priem, G. Racineux, Annales De La Fondation Louis De Broglie, Vol. 47, pp. 123-133 (2022)
A MULTI-SCALE MECHANICAL MODEL FOR HIGH FIBER CONTENT SMC IN COMPRESSION MOLDING, François Mahé, Christophe Binetruy, Suresh Advani, Julien Férec, Benedikt Eck, Eccm 2022 Proceedings of the 20th European Conference on Composite Materials Composites Meet Sustainability, Vol. 2, pp. 264-270, ISBN:[9782970161400] (2022)
Concrete Samples Extracted from Pile Caps and Affected by Internal Swelling Reactions: A Diagnostic Analysis, N. Nascimento, F. A.N. Silva, A. C. Azevedo, T. Mahfoud, A. Khelidj, João M.P.Q. Delgado, Masonry: Building Pathologies and Design, Vol. 22, pp. 83-101 (2022), doi:10.1007/978-3-030-80496-1_6
TENSOR-BASED NUMERICAL METHOD for STOCHASTIC HOMOGENIZATION, Quentin Ayoul-Guilmard, Anthony Nouy, Christophe Binetruy, Multiscale Modeling and Simulation, Vol. 20, issue 1, pp. 36-71 (2022), doi:10.1137/18M1191221
NUMERICAL MODELLING OF WELDED THERMOPLASTIC COMPOSITES INTERFACES BEHAVIOUR UNDER QUASI-STATIC AND DYNAMIC LOADING, Pauline Bourda, Patrick Rozycki, Mamadou Abdoul Mbacké, Eccm 2022 Proceedings of the 20th European Conference on Composite Materials Composites Meet Sustainability, Vol. 2, pp. 682-689, ISBN:[9782970161400] (2022)
EFFICIENT SIMULATION OF DUAL-SCALE FLOW IN RTM PROCESSES BY DOMAIN SKELETONIZATION, S. Bancora, C. Binetruy, S. Advani, S. Comas-Cardona, A. Leygue, E. Syerko, Eccm 2022 Proceedings of the 20th European Conference on Composite Materials Composites Meet Sustainability, Vol. 4, pp. 468-473, ISBN:[9782970161400] (2022)
ELABORATION OF HYBRID BIO-COMPOSITES WITH THERMOPLASTIC MATRIX: OPTIMAL FORMULATION AND MODELLING OF THE QUASI-STATIC BEHAVIOUR FOR AN AUTOMOTIVE STRUCTURAL APPLICATION PARTS, Wassim Guerfala, Patrick Rozycki, Christophe Binetruy, Eccm 2022 Proceedings of the 20th European Conference on Composite Materials Composites Meet Sustainability, Vol. 1, pp. 648-655, ISBN:[9782970161400] (2022)
MODELLING THE FORMING OF TAILORED FIBRE PLACEMENT PREFORMS ON A TETRAHEDRAL PUNCH, Simon Jessy, Hamila Nahiene, Binétruy Christophe, Comas Cardona Sébastien, Eccm 2022 Proceedings of the 20th European Conference on Composite Materials Composites Meet Sustainability, Vol. 4, pp. 702-709, ISBN:[9782970161400] (2022)
CHARACTERIZATION OF INTERLOCK 3D PERMEABILITY TENSOR FOR C-RTM PROCESS, Gabriela Gambarini, Boris Duchamp, Jérôme Olhagaray, Marc Waris, Christophe Binetruy, Sebastien Comas-Cardona, Eccm 2022 Proceedings of the 20th European Conference on Composite Materials Composites Meet Sustainability, Vol. 1, pp. 1318-1325, ISBN:[9782970161400] (2022)
A 6-ring embedded strain sensor, Marc L.M. François, Yann Lecieux, Meccanica, Vol. 57, issue 7, pp. 1735-1745 (2022), doi:10.1007/s11012-022-01530-8
Generalized computational framework based on X-FEM for thin films in time-harmonic problems: formulation, validation and application, S. Wu, O. Dazel, G. Legrain, Proceedings of ISMA 2022 International Conference on Noise and Vibration Engineering and Usd 2022 International Conference on Uncertainty in Structural Dynamics, pp. 451-461, ISBN:[9789082893151] (2022)
Fiber Optic Sensors to Perform Structural Health Monitoring of Concrete Structures Affected by Internal Swelling Reactions, K. K.Santos Silva, F. A.N. Silva, T. Mahfoud, A. Khelidj, A. C. Azevedo, J. M.P.Q. Delgado, Building Rehabilitation and Sustainable Construction, Vol. 23, pp. 29-54 (2022), doi:10.1007/978-3-030-95487-1_3
Diagnosis and Assessment of Deep Pile Cap Foundation of a Tall Building Affected by Internal Expansion Reactions—Case Study, João M.P.Q. Delgado, F. A.N. Silva, A. C. Azevedo, T. Mahfoud, A. Khelidj, N. Nascimento, Masonry: Building Pathologies and Design, Vol. 22, pp. 103-124 (2022), doi:10.1007/978-3-030-80496-1_7
TOWARDS A UNIFIED NUMERICAL MODELING OF FORMING AND CONSOLIDATION OF THERMOPLASTIC COMPOSITES WITH PREPREG PATCHES: A SHELL ELEMENT BASED APPROACH, Mulye Paris Dilip, Morançay Lionel, Binetruy Christophe, Comas Cardona Sébastien, Leygue Adrien, Eccm 2022 Proceedings of the 20th European Conference on Composite Materials Composites Meet Sustainability, Vol. 4, pp. 741-748, ISBN:[9782970161400] (2022)
A Multiscale Investigation of the Effects of Water on Grain Crushing, Younes Salami, Christophe Dano, Pierre Yves Hicher, Geotechnical and Geological Engineering, Vol. 40, issue 12, pp. 5895-5903 (2022), doi:10.1007/s10706-022-02256-w
ENVIRONMENTAL IMPACT ASSESSMENT OF THERMO-STAMPING CARBON FIBRES REINFORCED POLYPHENYLENE SULFIDE COMPOSITE PARTS, V. Lacoma, J. L. Bailleul, S. Moisan, C. Binetruy, O. Kerbrat, Eccm 2022 Proceedings of the 20th European Conference on Composite Materials Composites Meet Sustainability, Vol. 6, pp. 339-346, ISBN:[9782970161400] (2022)
New protocol for the durability assessment of offshore cement-based structures submitted to creep and seawater attack, Marinelle El-Khoury, Emmanuel Roziere, Frederic Grondin, Rachid Cor-Tas, Fadi Hage Chehade, Fib Symposium, pp. 385-392, ISBN:[9782940643172] (2022)
MULTISCALE SIMULATION OF DECONSOLIDATION IN THERMOPLASTIC COMPOSITE USING A LEVEL FINITE ELEMENT APPROACH, Le Gohebel Lorys, Silva Luisa, Le Corre Steven, Digonnet Hugues, Nguyen Tuan-Linh, Colliou Stéphanie, Eccm 2022 Proceedings of the 20th European Conference on Composite Materials Composites Meet Sustainability, Vol. 4, pp. 606-613, ISBN:[9782970161400] (2022)
Sparse Data-Driven Quadrature Rules via ℓp-Quasi-Norm Minimization, Mattia Manucci, Jose Vicente Aguado, Domenico Borzacchiello, Computational Methods in Applied Mathematics, Vol. 22, issue 2, pp. 389-411 (2022), doi:10.1515/cmam-2021-0131
Consequences of scalping and scalping/replacement procedures on strength properties of coarse-grained gap-graded soils, Nadine Ali Hassan, Ngoc Son Nguyen, Didier Marot, Fateh Bendahmane, Canadian Geotechnical Journal, Vol. 59, issue 10, pp. 1819-1832 (2022), doi:10.1139/cgj-2021-0504
A DEM study of the effect of the loss of fine particles on the mechanical behavior of gap-graded soils, Habib Taha, Ngoc Son Nguyen, Didier Marot, Abbas Hijazi, Khalil Abou-Saleh, Geomechanics for Energy and the Environment, Vol. 31, number 100305, issue 3 (2022), doi:10.1016/j.gete.2021.100305
Drainage Instabilities in Granular Materials: A New Biaxial Apparatus for Fluid Fingering and Solid Remodeling Detection, Rana Al Nemer, Giulio Sciarra, Julien Réthoré, Frontiers in Physics, Vol. 10, number L21403 (2022), doi:10.3389/fphy.2022.854268
In-situ 3D study of fatigue crack growth with overload effects in AlSi alloy, 3D in-situ study of fatigue crack growth with overload effects in an AlSi alloy, 3D in-situ study of fatigue crack growth with overload effects in an AlSi alloy, In-situ 3D study of fatigue crack growth with overload effects in AlSi alloy, 3D in-situ study of fatigue crack growth with overload effects in an AlSi alloy, In-situ 3D study of fatigue crack growth with overload effects in AlSi alloy, In-situ 3D study of fatigue crack growth with overload effects in AlSi alloy, 3D in-situ study of fatigue crack growth with overload effects in an AlSi alloy, Lucas Sanciet--Munier, Nathalie Limodin, Jean-Yves Buffiere, Jean-Francois Witz, Michel Coret, Ghita Filali, Yves Gaillard, Michel Fleuriot, Arnaud Weck, Anne Bonnin, Goran Lovric, Joël Lachambre, 5th International Conference on Tomography of Materials and Structure - ICTMS2022, Congrès Français de Mécanique 2022, Congrès Français de Mécanique 2022, 5th International Conference on Tomography of Materials and Structure - ICTMS2022, Congrès Français de Mécanique 2022, 5th International Conference on Tomography of Materials and Structure - ICTMS2022, 5th International Conference on Tomography of Materials and Structure - ICTMS2022, Congrès Français de Mécanique 2022 (2022)
Natural frequencies estimation of a monopile supported DTU-10 MW Offshore Wind Turbine, Philip Alkhoury, Abdul-Hamid Soubra, Valentine Rey, Mourad Aït-Ahmed, 4th International Symposium on Frontiers in Offshore Geotechnics (2022)
Monitoring of electrical properties of slag concrete during hydration phase using embedded resistivity sensors, Marie-Ange Eid, Géraldine Villain, Stéphanie Bonnet, Sérgio Palma Lopes, Jean-Luc Geffard, 25e Congrès Français de Mécanique (2022)
Étude de l’influence de la vitesse de chargement sur le comportement de composite thermoplastique soudé par ultrasons, Pauline Bourda, Patrick Rozycki, Mamadou A. Mbacke, 25e Congrès Français de Mécanique (2022)
Régularisation de Lipschitz pour la modélisation de la fissuration par l'endommagement, Nicolas Chevaugeon, Nicolas Moes, 25e Congrès Français de Mécanique (2022)
Review of “Photometric DIC: A Unified Framework for Global Stereo Digital Image Correlation based on the Construction of Textured Digital Twins”, Raphaël Fouque, Robin Bouclier, Jean-Charles Passieux, Jean-Noël Périé, Jean-François Witz, Julien Réthoré (2022)
Numerical Modeling of GFRP Structures under Fire Loading, Bruno Aguirre, Laurent Stainier, Carlos Tiago, João Correia, 15ème colloque national en calcul des structures (2022)
Fatigue life study of superelastic NiTi Shape Memory Alloys using self-heating under cyclic loading method, Luc Saint-Sulpice, Vincent Legrand, Shabnam Arbab-Chirani, Sylvain Calloch, Cédric Doudard, International Journal of Fatigue, Vol. 165, number 107208, issue 1 (2022), doi:10.1016/j.ijfatigue.2022.107208
Déformation eXtrême de maillage (X-MESH) : un nouveau paradigme pour le suivi de surfaces physiques. Application au changement de phase, Nicolas Moes, Jean-François Remacle, Jonathan Lambrechts, Benoît Lé, Nicolas Chevaugeon, 25e Congrès Français de mécanique (2022)
Tensile test of the main cement paste phases using molecular dynamics simulation, Sela Hoeun, Fabrice Bernard, Frédéric Grondin, Siham Kamali-Bernard, Syed Yasir Alam, 25e Congrès Français de Mécanique, Nantes (2022)
Impact d'instabilités hydrauliques sur l'amplitude de déformation du milieu granulaire durant le drainage, Rana Al Nemer, Giulio Sciarra, Julien Réthoré, 11èmes journées nationales de géotechnique et de géologie de l’ingénieur (2022)
Comparative study of three high order sliding mode model based design for a floating wind turbine robust control, Hedi Basbas, Hussein Obeid, Salah Laghrouche, Mickaël Hilairet, Franck Plestan, Conference on Decision and Control, pp. 4294-4299, IEEE (2022), doi:10.1109/CDC51059.2022.9992517
Prise en compte de l'historique de chargement pour l'estimation du dommage au sein d'une structure en acier sollicitée en fatigue, Clément Freyssinet, Valentine Rey, Franck Schoefs, Tanguy Moro, 25e Congrès Français de Mécanique, Nantes, 29 août-2 septembre 2022 (2022)
Signature of the vascular tumor microenvironment as a marker of the therapeutic response to doxorubicin in a preclinical model of osteosarcoma, Vincent Crenn, Jérôme Amiaud, Anne Gomez-Brouchet, Vincent Potiron, François Gouin, Philippe Rosset, Louis-Romée Le Nail, Luciano Vidal, Helios Bertin, Régis Brion, Guillaume Tran, Franck Verrecchia, Isabelle Corre, Françoise Redini, American Journal of Cancer Research (2022)
Prise en compte de l'adaptation mécanique de la cellule lors de l'enveloppement de nanoparticules, Sarah Iaquinta, Shahram Khazaie, Sylvain Fréour, Frédéric Jacquemin, 15ème colloque national en calcul des structures (2022)
Projet National FastCarb – Propriétés de bétons contenant des granulats de béton recyclés carbonatés, Thomas Pernin, Laetitia Robbiano, Amor Ben Fraj, Harifidy Ranaivomanana, Fanny Geffray, Gabriel Pham, Xavier Guillot, Ouali Amiri, Jonathan Mai-Nhu, Patrick Rougeau, Academic Journal of Civil Engineering (2022), doi:10.26168/ajce.40.3.8
Effets de la température sur les mécanismes physico-chimiques gouvernant le processus de carbonatation en température, Harifidy Ranaivomanana, Gaël Corvec, Anthony Soive, Philippe Turcry, Ouali Amiri, Academic Journal of Civil Engineering (2022), doi:10.26168/ajce.40.3.3
Characterization of the mechanical response of elastomers using complex experiments: Simple ways to describe multiaxiality, Léna Costecalde, Adrien Leygue, Michel Coret, Erwan Verron, Constitutive Models for Rubber XII: Proceedings of the 12th European Conference on Constitutive Models for Rubber, pp. 164-169, CRC Press (2022), doi:10.1201/9781003310266-27
Analyse comparative de cartographies du tenseur complet des contraintes résiduelles par diffraction des neutrons dans des alliages préparés par fusion laser sur lit de poudre., Baptiste Girault, David Gloaguen, Bruno Courant, Pierre-Antoine Dubos, Marie-José Moya, Maxime Limousin, Daniel Marcos, Saurabh Kabra, Winfried Kockelmann, J. Rebelo Kornmeier, Matériaux 2022 (2022)
Mécanique numérique pilotée par les données pour les comportements anélastiques, Héloïse Dandin, Adrien Leygue, Laurent Stainier, 15ème colloque national en calcul des structures (2022)
CAMCATT trial over Toulouse (France): a multisensory experiment to validate TRISHNA urban products, Xavier Briottet, Laure Roupioz, Romain Barda-Chatain, Auline Rodler, Sihem Guernouti, Marjorie Musy, Françoise Nerry, Aude Lemonsu, Laurent Poutier, Philippe Barillot, Philippe Déliot, Arnaud Cerbelaud, Ahmad Albitar, Jean-Louis Roujean, José Antonio Sobrino, Sébastien Gadal, Eric Carroll, Sébastien Bridier, Charlène Cassante, Delphine Barbon-Dubosc, Philippe Doublet, Amaury Guilhem de Lataillade, 6. International Symposium: Recent Advances in Quantitative Remote Sensing, pp. 114 (2022)
Evolution of the microstructure and shrinkage of recycled aggregates during accelerated carbonation, Farah Kaddah, Harifidy Ranaivomanana, Ouali Amiri, Emmanuel Rozière, Academic Journal of Civil Engineering, Vol. 40 (2022), doi:10.26168/ajce.40.1.4
Une méthodologie pour la réalisation de pièces de grandes dimensions polymères par fabrication additive, Matthieu Rauch, Olivier Authelin, Jean Yves Hascoet, Luiz Bier, Manufacturing 21 (2022)
Toward the identification of a Cosserat effective continuum for quasi-periodic lattice materials, Audrey Somera, Martin Poncelet, Nicolas Auffray, Julien Réthoré, International Conference on Nonlinear Solid Mechanics (ICoNSoM 2022) (2022)
Nitsche-XFEM for pressure jump interface condition in vibro-acoustic problems in presence of porous materials, Shaoqi Wu, Grégory Legrain, Olivier Dazel, 15e colloque national en calcul des structures (2022)
Characterisation of the dynamic toughness of composite materials, Bastien Lammens, Gerald Portemont, Julien Berthe, Rian Seghir, Julien Réthoré, CFM 2022 (2022)
Proposal of a homogenization model of the mechanical properties of a silt treated with lime and binder, Anthony Soive, Lucile Pigeot, Nathalie Dufour, Ahmed Loukili, Computers & Mathematics with Applications, pp. 1-7, Elsevier (2022)
Lip-field approach for modeling strain softening in viscoelastic materials, Rajasekar Gopalsamy, Nicolas Chevaugeon, Olivier Chupin, Jean Michel Piau, Ferhat Hammoum, 25e Congrès Français de Mécanique, pp. 11 p (2022)
Using candle gel to simulate the frictional instability of earthquake faults in the laboratory: rheological characterization, Pravin Badarayani, Abdallah Aoude, Ioannis Stefanou, 25e Congrès Français de Mécanique, Nantes, 29 août-2 septembre 2022 (2022)
Essais complexes pour la caractérisation des matériaux : Comment décrire la multiaxialité ?, Léna Costecalde, Adrien Leygue, Michel Coret, Erwan Verron, 25e Congrès Français de Mécanique (2022)
Application d'une méthode data-driven à des essais complexes pour l'identification de modèles hyperélastiques., Léna Costecalde, Adrien Leygue, Michel Coret, Erwan Verron, 15ème colloque national en calcul des structures (2022)
Une formulation bidimensionnelle pour l'homogénéisation en flexion de structures hélicoïdales, F Treyssède, Patrice Cartraud, 25ème Congrès Français de Mécanique (2022)
Lipschitz Regularization For Softening Material, Nicolas Chevaugeon, Nicolas Moes, 15th World Congress on Computational Mechanics (WCCM-XV) and 8th Asian Pacific Congress on Computational Mechanics (APCOM-VIII), pp. 279 (2022)
Effet de l'inertie sur le flambement d'une poutre sous un chargement axial dynamique, Amine Alaoui-Tahiri, Claude Stolz, Mathieu Corus, Pierre Badel, 15ème colloque national en calcul des structures (2022)
Stratégie adataptive de calcul multiéchelle piloté par les données, Auriane Platzer, Adrien Leygue, Laurent Stainier, 15ème colloque national en calcul des structures (2022)
Modélisation d'un tube par élément fini de type poutre enrichi permettant l'ovalisation de la section, Youri Pascal-Abdellaoui, Claude Stolz, Frederic Daude, Philippe Lafon, Pascal Galon, 15ème colloque national en calcul des structures (2022)
Contact en mécanique des structures, Anh Le Van, Wiley (2022)
Un cadre variationnel pour l'intégration de modèles de comportement thermomécaniques couplés à des lois de conservation hyperboliques, Thomas Heuzé, Laurent Stainier, 15ème colloque national en calcul des structures (2022)
Comparative study of mechanical properties and heat of hydration of fine recycled aggregates and limestone fillers cement mortars, Mahmoud Nacer-Eddine Hamdadou, Nordine Leklou, Harifidy Ranaivomanana, François Bignonnet, NOMAD 2022 - 4e conférence internationale francophone Nouveaux Matériaux et Durabilité (2022)
Comportement dynamique et cyclique des limons traités à la chaux et au liant hydraulique : approche expérimentale et modélisations, Lucile Pigeot, Nathalie Dufour, Anthony Soive, Fabienne Dermenonville, Ahmed Loukili, 11èmes journées nationales de géotechnique et de géologie de l’ingénieur (2022)
A data-driven solver scheme for inelastic problems, Erik Prume, Laurent Stainier, Michael Ortiz, Stefanie Reese, PAMM, Proceedings in Applied Mathematics and Mechanics, Vol. 23 (2022), doi:10.1002/pamm.202200153
Comportement mécanique du cobalt polycristallin : transformation de phase et effets de taille, Pierre-Antoine Dubos, Eric Hug, Michel Coret, Jamal Fajoui, David Gloaguen, Baptiste Girault, Clément Keller, Mayerling Martinez Celis, 25e Congrès Français de Mécanique (2022)
Comportement effectif et limite de linéarité d'un d’un matériau architecturé 2D périodique à cellules triangulaires, Valentin Jeanneau, Christelle Combescure, M.L.M. François, 25e Congrès Français de Mécanique (2022)
Quantification of the effect of pump wave amplitude on crack breathing for the Nonlinear Coda Wave Interferometry, Shilin Qu, Benoît Hilloulin, Olivier Chupin, Jean Michel Piau, Odile Abraham, Vincent Tournat, e-Journal of Nondestructive Testing, Vol. 27, issue 9 (2022), doi:10.58286/27238
The eXtreme Mesh deformation approach (X-MESH) to follow contact fronts in a sharp manner, Benoît Lé, Nicolas Moës, Nicolas Chevaugeon, Jean-François Remacle, 11th European Solid Mechanics Conference (ESMC2022) (2022)
CZM analysis of secondary debondings induced by wedge splitting testing of multi-layer specimens, Nathan Lemartinel, Armelle Chabot, Eshan Dave, Laurent Gornet, 25ème Congrès Français de Mécanique (CFM2022) (2022)
Détection et surveillance des instabilités hydromécaniques dans les géomatériaux : digitation et déformations localisées, Rana Al Nemer, Giulio Sciarra, Julien Réthoré, 25e Congrès Français de Mécanique (2022)
3D metrological shape measurements from X-ray radiographs, Lucie Calmettes, M.L.M. François, Julien Réthoré, 25e Congrès Français de Mécanique, Nantes (2022)
Machines à vecteurs supports pour la fiabilité : Exploitation des estimateurs d'erreur de discrétisation pour la construction de classificateurs, Ludovic Mell, Valentine Rey, Franck Schoefs, 15ème colloque national en calcul des structures (2022)
Impact du vieillissement en air sur les propriétés en traction et en fatigue d’un polychloroprène chargé, Hugo Madeira, Pierre-Yves Le Gac, Maelenn Le Gall, Erwan Verron, 25e Congrès Français de Mécanique (2022)
Statistical properties of homogenized random polycrystals with uncertain single crystal elastic moduli, Ningyue Sheng, Shahram Khazaie, Mathilde Chevreuil, Sylvain Fréour, 15ème colloque national en calcul des structures (2022)
Assessment of the thermal effect of biofouling on the submarine dynamic cable of floating offshore wind turbines, Ziad Maksassi, Bertrand Garnier, Ahmed Ould El Moctar, Franck Schoefs, 5th International Conference on Renewable Energies Offshore (RENEW 2022) (2022)
Phase distribution and properties identification of heterogeneous materials: A data-driven approach, Gabriel Valdés-Alonzo, Christophe Binetruy, Benedikt Eck, Alberto García-González, Adrien Leygue, Computer Methods in Applied Mechanics and Engineering, Vol. 390, number 114354, issue 12 (2022), doi:10.1016/j.cma.2021.114354
Environmental impact assessment of manufacturing a carbon fibre reinforced polyphenylene sulfide composite part using the thermo-stamping process, Environmental impact assessment of manufacturing a carbon fibres reinforced polyphenylene sulfide composite parts using the thermo-stamping process, Environmental impact assessment of manufacturing a carbon fibres reinforced polyphenylene sulfide composite parts using the thermo-stamping process, Environmental impact assessment of manufacturing a carbon fibre reinforced polyphenylene sulfide composite part using the thermo-stamping process, Vincent Lacoma, Jean Luc Bailleul, Sandy Moisan, Christophe Binetruy, Olivier Kerbrat, 25e Congrès Français de Mécanique, 5ème Congrès Français de Mécanique, 29 août au 2 septembre 2022, 5ème Congrès Français de Mécanique, 29 août au 2 septembre 2022, 25e Congrès Français de Mécanique (2022)
Analyse des effets de taille : Comparaison entre le modèle TLS (Thick Level Set) et le Critère Couplé, Jihed Zghal, Nicolas Moes, Dominique Leguillon, Claude Stolz, 25ème Congrès Français de Mécanique (2022)
Identification des phases formées dans les mélanges métakaolin-laitier activés, Faten Souayfan, Emmanuel Rozière, Michaël Paris, Dimitri Deneele, Ahmed Loukili, Christophe Justino, NOMAD 2022 - 4e conférence internationale francophone Nouveaux Matériaux et Durabilité (2022)
Modélisaton multiéchelle "data driven" d'une poutre hétérogène élastique non linéaire, Noémie Jeannin, Fabien Ménard, Patrice Cartraud, Laurent Stainier, 25e Congrès Français de Mécanique (2022)
Detection and characterization of fatigue crack growth by acoustic emission and digital image correlation, Théotime de la Selle, Stéphanie Deschanel, Jérôme Weiss, Joël Lachambre, Julien Réthoré, 25e Congrès Français de Mécanique (2022)
Thermal characterization and thermal effect assessment of mussels around a dynamic submarine power cable of floating offshore wind turbine, Ziad Maksassi, Bertrand Garnier, Ahmed Ould El Moctar, Franck Schoefs, International Offshore Wind Technical Conference (IOWTC2022), Vol. 15 (2022)
Etablissement de fenêtre opératoire par une approche expérimentale de la mesure de température lors du procédé FSW, Moura Abboud, Laurent Dubourg, Adrien Leygue, Guillaume Racineux, Olivier Kerbrat, Conference Manufacturing21 (2022)
Quelques expériences inspirées par le monopôle magnétique leptonique de G. Lochak, Gaëtan de Lacheze-Murel, Daniel Fargue, Claude Daviau, Michel Karatchentzeff, Adrien Marizy, Didier Priem, Guillaume Racineux, Annales de la Fondation Louis de Broglie (2022)
Illustration of the weakness of the delayed damage model for dynamic loading, Jihed Zghal, Nicolas Moes, European Mechanics of Materials Conference (2022)
Renewal of Ballasted Railway Tracks in France on Conventional Lines: Contribution to the Development of Material Flow Analysis (MFA), Olivier Giboulot, Emmanuel Lemelin, Christophe Binetruy, Nor-Edine Abriak, Resources (2022), doi:10.2139/ssrn.4229532
Étude de la dépendance du comportement mécanique des treillis quasi-périodiques au motif élémentaire, Audrey Somera, Martin Poncelet, Nicolas Auffray, Julien Réthoré, 25ème Congrès Français de Mécanique (2022)
Moisture effects on monitoring GFRP-balsa sandwich structure by acoustic emission and infrared thermography, Yuan Wu, Marie-Laetitia Pastor, Marianne Perrin, Pascal Casari, Xiaojing Gong, 13th International Conference on Sandwich Structures (ICSS-13) (2022)
Monitoring chloride diffusion in BFS concrete using an Electrical Resistivity Tomography device, Mohamad Khodor El Achrafi, Géraldine Villain, Stéphanie Bonnet, e-Journal of Nondestructive Testing, Vol. 27, issue 9 (2022), doi:10.58286/27281
Numerical Investigation of Aggregates Size and Volume Fraction on Gas Permeability of 3D Meso-Scale Concrete, Hayder Al-Khazraji, Nathan Benkemoun, Marta Choinska, Abdelhafid Khelidj, Misan Journal of Engineering Sciences, Vol. 1, issue 2, pp. 56-62 (2022), doi:10.61263/mjes.v1i2.24
Représentation maillée de fronts de contact par l’approche eXtreme Mesh (X-MESH), Benoît Lé, Nicolas Moes, Nicolas Chevaugeon, Jean-François Remacle, 25e Congrès Français de Mécanique (2022)
Durabilité des bétons bas carbone vis-à-vis de la corrosion induite par carbonatation, Imane Elkhaldi, Emmanuel Rozière, Ahmed Zakarya Bendimerad, Géraldine Villain, Ahmed Loukili, NOMAD 2022 - 4e conférence internationale francophone Nouveaux Matériaux et Durabilité (2022)
Mechanical behaviour of honeycomb core under dynamic l-w shear-compression loading: development of an experimental characterization device, Louis Bridonneau, Jean-François Ferrero, Steven Marguet, Laurent Gornet, Patrick Rozycki, M2D2022 - 9th International Conference on Mechanics and Materials in Design, pp. 499-506 (2022)
Règles de quadrature "moment-fitting" positives pour les approches de domaines fictifs, Grégory Legrain, 15ème colloque national en calcul des structures (2022)
Advanced time-resolved characterization of Stress Assisted Grain Boundary Oxidation of 718 Ni superalloy, Pedro Damas Resende, Nicola Viganò, Didier Bardel, Julien Réthoré, Wolfgang Ludwig, IOP Conference Series: Materials Science and Engineering, Vol. 1249, number 012046, issue 1 (2022), doi:10.1088/1757-899X/1249/1/012046
Review of “Rate dependency and ply thickness influence on transverse cracking evolution in cross-ply laminates”, Fabien Coussa, Julien Berthe, Matthieu Ragonet, Julien Réthoré (2022)
Review of “A simple extension of FFT-based methods to strain gradient loadings – Application to the homogenization of beams and plates with linear and non-linear behaviors”, Lionel Gélébart, Sébastien Brisard, Julien Réthoré (2022)
A non-linear multi-scales chemo-mechanical model describing the delayed evolution of concrete structures in marine environments, Marinelle El Khoury, Frédéric Grondin, Emmanuel Rozière, Rachid Cortas, Fadi Hage Chehade, 25e Congrès Français de Mécanique (2022)
X-Mesh appliquée aux écoulements diphasiques, Antoine Quiriny, Jean-François Remacle, Jonathan Lambrechts, Nicolas Moes, 15ème colloque national en calcul des structures (2022)
Représentation de comportements anélastiques en mécanique numérique pilotée par les données : proposition d'un modèle sous forme de graphe orienté, Héloïse Dandin, Adrien Leygue, Laurent Stainier, 25e Congrès Français de Mécanique, Nantes (2022)
Régularisation de Lipschitz pour la modélisation de l'endommagement, Nicolas Chevaugeon, Nicolas Moes, 15ème colloque national en calcul des structures (2022)
Méthode des éléments de frontière pour la mécanique des failles et le contrôle sismique, Laura Bagur, Stéphanie Chaillat, Jean-François Semblat, Ioannis Stefanou, CSMA 2022 - 15ème Colloque National en Calcul des Structures (2022)
Sensitivity analysis applied to a model of the adaptative cellular uptake of nanoparticles, Sarah Iaquinta, Shahram Khazaie, Sylvain Fréour, Eléna Ishow, Christophe Blanquart, Frédéric Jacquemin, 25e Congrès Français de Mécanique (2022)
Prise en compte des effets de la microstructure en fissuration, Soukaina Riad, Didier Bardel, Julien Réthoré, 15ème colloque national en calcul des structures (2022)
Remarkable response of hollow thermoplastic microspheres-elastomer matrix composites in uniaxial tension, Michel Coret, Erwan Verron, Pierre Rublon, Bruno Leblé, Mechanics of Soft Materials, Vol. 4, number 10,479, issue 1 (2022), doi:10.1007/s42558-022-00046-1
The eXtreme Mesh deformation approach (X-MESH) for sharp contact fronts modeling, Benoît Lé, Nicolas Moes, Nicolas Chevaugeon, Jean-Francois Remacle, 15th World Congress on Computational Mechanics (WCCM-XV) and 8th Asian Pacific Congress on Computational Mechanics (APCOM-VIII) (2022)
Essais croisés, carbonatation accélérée des granulats recycles et caractérisation des résultats de la carbonatation, Bogdan Cazacliu, Assia Djerbi, Sandrine Braymand, Bruno Huet, Julie Bertola, Virginie Vial, Jena Jeong, Johan Colin, Farah Kaddah, Ouali Amiri, Philippe Turcry (2022)
Review of ``Robustness of the Data-Driven Identification algorithm with incomplete input data'', Marie Dalémat, Michel Coret, Adrien Leygue, Erwan Verron (2022), doi:10.1016/j.mechmat.2019.103087
Environmental impact assessment of manufacturing a carbon fibres reinforced polyphenylene sulfide composite parts using the thermo-stamping process, Environmental impact assessment of manufacturing a carbon fibre reinforced polyphenylene sulfide composite part using the thermo-stamping process, Vincent Lacoma, Jean-Luc Bailleul, Sandy Moisan, Christophe Binetruy, Olivier Kerbrat, 5ème Congrès Français de Mécanique, 29 août au 2 septembre 2022, 25e Congrès Français de Mécanique (2022)
In-situ 3D study of fatigue crack growth with overload effects in AlSi alloy, 3D in-situ study of fatigue crack growth with overload effects in an AlSi alloy, 3D in-situ study of fatigue crack growth with overload effects in an AlSi alloy, In-situ 3D study of fatigue crack growth with overload effects in AlSi alloy, Lucas Sanciet--Munier, Nathalie Limodin, Jean-Yves Buffiere, Jean-Francois Witz, Michel Coret, Ghita Filali, Yves Gaillard, Michel Fleuriot, Arnaud Weck, Anne Bonnin, Goran Lovric, Joël Lachambre, 5th International Conference on Tomography of Materials and Structure - ICTMS2022, Congrès Français de Mécanique 2022, Congrès Français de Mécanique 2022, 5th International Conference on Tomography of Materials and Structure - ICTMS2022 (2022)
3D in-situ study of fatigue crack growth with overload effects in an AlSi alloy, In-situ 3D study of fatigue crack growth with overload effects in AlSi alloy, Lucas Sanciet--Munier, Nathalie Limodin, Jean-Yves Buffiere, Jean-Francois Witz, Michel Coret, Ghita Filali, Yves Gaillard, Michel Fleuriot, Arnaud Weck, Anne Bonnin, Goran Lovric, Joël Lachambre, Congrès Français de Mécanique 2022, 5th International Conference on Tomography of Materials and Structure - ICTMS2022 (2022)
3D in-situ study of fatigue crack growth with overload effects in an AlSi alloy, In-situ 3D study of fatigue crack growth with overload effects in AlSi alloy, Lucas Sanciet--Munier, Nathalie Limodin, Jean-Yves Buffiere, Jean-Francois Witz, Michel Coret, Ghita Filali, Yves Gaillard, Michel Fleuriot, Arnaud Weck, Anne Bonnin, Goran Lovric, Joël Lachambre, Congrès Français de Mécanique 2022, 5th International Conference on Tomography of Materials and Structure - ICTMS2022 (2022)
Environmental impact assessment of manufacturing a carbon fibres reinforced polyphenylene sulfide composite parts using the thermo-stamping process, Environmental impact assessment of manufacturing a carbon fibre reinforced polyphenylene sulfide composite part using the thermo-stamping process, Vincent Lacoma, Jean-Luc Bailleul, Sandy Moisan, Christophe Binetruy, Olivier Kerbrat, 5ème Congrès Français de Mécanique, 29 août au 2 septembre 2022, 25e Congrès Français de Mécanique (2022)
Thermodynamics-based Artificial Neural Networks for constitutive modeling, Filippo Masi, Ioannis Stefanou, Paolo Vannucci, Victor Maffi-Berthier, Journal of the Mechanics and Physics of Solids, Vol. 147, number 104277, issue 1 (2021), doi:10.1016/j.jmps.2020.104277
Data-Driven multiscale modeling in mechanics, K. Karapiperis, L. Stainier, M. Ortiz, J. E. Andrade, Journal of the Mechanics and Physics of Solids, Vol. 147, number 104239 (2021), doi:10.1016/j.jmps.2020.104239
Calcined clay – Limestone cements: Hydration processes with high and low-grade kaolinite clays, Guillemette Cardinaud, Emmanuel Rozière, Olivier Martinage, Ahmed Loukili, Laury Barnes-Davin, Michael Paris, Dimitri Deneele, Construction and Building Materials, Vol. 277, number 122271, issue 10 (2021), doi:10.1016/j.conbuildmat.2021.122271
Early age autogenous shrinkage cracking risk of an ultra-high performance concrete (UHPC) wall: Modelling and experimental results, J. Kheir, A. Klausen, T. A. Hammer, L. De Meyst, B. Hilloulin, K. Van Tittelboom, A. Loukili, N. De Belie, Engineering Fracture Mechanics, Vol. 257, number 108024, issue 1 (2021), doi:10.1016/j.engfracmech.2021.108024
A Review of Sand–Clay Mixture and Soil–Structure Interface Direct Shear Test, Kexin Yin, Anne Laure Fauchille, Eugenia Di Filippo, Panagiotis Kotronis, Giulio Sciarra, Geotechnics, Vol. 1, issue 2, pp. 260-306 (2021), doi:10.3390/geotechnics1020014
Finite element solver for data-driven finite strain elasticity, Auriane Platzer, Adrien Leygue, Laurent Stainier, Michael Ortiz, Computer Methods in Applied Mechanics and Engineering, Vol. 379, number 113756, issue 4 (2021), doi:10.1016/j.cma.2021.113756
Model-free data-driven computational mechanics enhanced by tensor voting, Robert Eggersmann, Laurent Stainier, Michael Ortiz, Stefanie Reese, Computer Methods in Applied Mechanics and Engineering, Vol. 373, number 113499, issue 1 (2021), doi:10.1016/j.cma.2020.113499
Out-of-plane permeability measurement for reinforcement textiles: A benchmark exercise, A. X.H. Yong, A. Aktas, D. May, A. Endruweit, S. Advani, P. Hubert, S. G. Abaimov, D. Abliz, I. Akhatov, M. A. Ali, T. Allen, D. C. Berg, S. Bickerton, C. Brauner, D. Brütsch, B. Caglar, H. Caglar, P. Causse, A. Chiminelli, A. Cohades, S. Comas-Cardona, M. Danzi, J. Dittmann, C. Dransfeld, P. Ermanni, E. Fauster, J. A. Garcia-Manrique, A. George, R. Graupner, V. Grishaev, A. Guilloux, M. Hancioglu, W. Harizi, T. Herman, W. Huang, M. A. Kabachi, A. Keller, K. Kind, M. Laspalas, O. V. Lebedev, M. Lizaranzu, A. C. Long, K. Masania, V. Michaud, P. Middendorf, D. Salvatori, R. Schubnel, N. Sharp, M. Sozer, J. Thomas, F. Trochu, R. Umer, J. Valette, J. H. Wang, B. Willenbacher, Composites Part A Applied Science and Manufacturing, Vol. 148, number 106480, issue 1 (2021), doi:10.1016/j.compositesa.2021.106480
Efficient data structures for model-free data-driven computational mechanics, Robert Eggersmann, Laurent Stainier, Michael Ortiz, Stefanie Reese, Computer Methods in Applied Mechanics and Engineering, Vol. 382, number 113855, issue 11 (2021), doi:10.1016/j.cma.2021.113855
Seismic behavior & risk assessment of an existing bridge considering soil-structure interaction using artificial neural networks, Mohammed Rachedi, Mohammed Matallah, Panagiotis Kotronis, Engineering Structures, Vol. 232, number 111800 (2021), doi:10.1016/j.engstruct.2020.111800
Linking multi-scale 3D microstructure to potential enhanced natural gas recovery and subsurface CO2storage for Bowland shale, UK, Lin Ma, Anne Laure Fauchille, Humera Ansari, Michael Chandler, Paul Ashby, Kevin Taylor, Ronny Pini, Peter D. Lee, Energy and Environmental Science, Vol. 14, issue 8, pp. 4481-4498 (2021), doi:10.1039/d0ee03651j
Experimental characterisation of textile compaction response: A benchmark exercise, A. X.H. Yong, A. Aktas, D. May, A. Endruweit, S. V. Lomov, S. Advani, P. Hubert, S. G. Abaimov, D. Abliz, I. Akhatov, M. A. Ali, S. Allaoui, T. Allen, D. C. Berg, S. Bickerton, B. Caglar, P. Causse, A. Chiminelli, S. Comas-Cardona, M. Danzi, J. Dittmann, C. Dransfeld, P. Ermanni, E. Fauster, A. George, J. Gillibert, Q. Govignon, R. Graupner, V. Grishaev, A. Guilloux, M. A. Kabachi, A. Keller, K. Kind, D. Large, M. Laspalas, O. V. Lebedev, M. Lizaranzu, A. C. Long, C. López, K. Masania, V. Michaud, P. Middendorf, P. Mitschang, S. van Oosterom, R. Schubnel, N. Sharp, P. Sousa, F. Trochu, R. Umer, J. Valette, J. H. Wang, Composites Part A Applied Science and Manufacturing, Vol. 142, number 106243, issue 4 (2021), doi:10.1016/j.compositesa.2020.106243
Compaction Banding in High-Porosity Carbonate Rocks: 1. Experimental Observations, Youssouf Abdallah, Jean Sulem, Michel Bornert, Siavash Ghabezloo, Ioannis Stefanou, Journal of Geophysical Research Solid Earth, Vol. 126, number 43, issue 1 (2021), doi:10.1029/2020JB020538
Microstructural investigation of slag-blended UHPC: The effects of slag content and chemical/thermal activation, Omar M. Abdulkareem, Amor Ben Fraj, Marwen Bouasker, Lahcen Khouchaf, Abdelhafid Khelidj, Construction and Building Materials, Vol. 292, number 123455, issue 9 (2021), doi:10.1016/j.conbuildmat.2021.123455
Improving arc stability during wire arc additive manufacturing of thin-walled titanium components, Shakti Swaroop Choudhury, Surendar K. Marya, Murugaiyan Amirthalingam, Journal of Manufacturing Processes, Vol. 66, pp. 53-69 (2021), doi:10.1016/j.jmapro.2021.03.033
Solid and 3D beam finite element models for the nonlinear elastic analysis of helical strands within a computational homogenization framework, Fabien Ménard, Patrice Cartraud, Computers and Structures, Vol. 257, number 106675 (2021), doi:10.1016/j.compstruc.2021.106675
Reusing calcined sediments from Chorfa II dam as partial replacement of cement for sustainable mortar production, Rachid Hadj Sadok, Nadia Belas, Mahfoud Tahlaiti, Ridha Mazouzi, Journal of Building Engineering, Vol. 40, number 102273 (2021), doi:10.1016/j.jobe.2021.102273
Experimental study of hard marine growth effect on the hydrodynamical behaviour of a submarine cable, A. Marty, C. Berhault, G. Damblans, J. V. Facq, B. Gaurier, G. Germain, T. Soulard, F. Schoefs, Applied Ocean Research, Vol. 114, number 102810, issue 5 (2021), doi:10.1016/j.apor.2021.102810
A quantitative assessment of the parameters involved in the freeze–thaw damage of cement-based materials through numerical modelling, Abderrahmane Rhardane, Sara Al Haj Sleiman, Syed Yasir Alam, Frédéric Grondin, Construction and Building Materials, Vol. 272, number 121838, issue 2 (2021), doi:10.1016/j.conbuildmat.2020.121838
On the attraction power of critical state in granular materials, Na Deng, Antoine Wautier, Yannick Thiery, Zhen Yu Yin, Pierre Yves Hicher, François Nicot, Journal of the Mechanics and Physics of Solids, Vol. 149, number 104300, issue 2 (2021), doi:10.1016/j.jmps.2021.104300
A study of suffusion kinetics inspired from experimental data: comparison of three different approaches, A. Kodieh, R. Gelet, D. Marot, A. Z. Fino, Acta Geotechnica, Vol. 16, issue 2, pp. 347-365 (2021), doi:10.1007/s11440-020-01016-5
Probabilistic failure analysis, performance assessment, and sensitivity analysis of corroded reinforced concrete structures, Hongyuan Guo, You Dong, Emilio Bastidas-Arteaga, Xiang Lin Gu, Engineering Failure Analysis, Vol. 124, number 105328, issue 1532 (2021), doi:10.1016/j.engfailanal.2021.105328
Eco-design of spirulina solar cultivation: Key aspects to reduce environmental impacts using Life Cycle Assessment, Camilo Duran Quintero, Anne Ventura, Olivier Lépine, Jérémy Pruvost, Journal of Cleaner Production, Vol. 299, number 126741 (2021), doi:10.1016/j.jclepro.2021.126741
Effect of fiber reinforcement on the compression and flexural strength of fiber-reinforced geopolymers, Michał Łach, Bartłomiej Kluska, Damian Janus, Dawid Kabat, Kinga Pławecka, Kinga Korniejenko, Martin Duarte Guigou, Marta Choińska, Applied Sciences Switzerland, Vol. 11, number 10443, issue 21 (2021), doi:10.3390/app112110443
Earth buildings with local materials: Assessing the variability of properties measured using non-destructive methods, Mircea Barnaure, Stephanie Bonnet, Philippe Poullain, Construction and Building Materials, Vol. 281, number 122613, issue 1 (2021), doi:10.1016/j.conbuildmat.2021.122613
Investigation of deposition strategy on wire and arc additive manufacturing of aluminium components, Matthieu Rauch, Uzoma Vincent Nwankpa, Jean Yves Hascoet, Journal of Advanced Joining Processes, Vol. 4, number 100074 (2021), doi:10.1016/j.jajp.2021.100074
Determination of the origin of the strength regain after self-healing of binary and ternary cementitious materials including slag and metakaolin, Carol Youssef Namnoum, Benoit Hilloulin, Frédéric Grondin, Ahmed Loukili, Journal of Building Engineering, Vol. 41, number 102739, issue 6 (2021), doi:10.1016/j.jobe.2021.102739
Reactivity effect of calcium carbonate on the formation of carboaluminate phases in ground granulated blast furnace slag blended cements, Walid Deboucha, Nassim Sebaibi, Yassine El Mendili, Aurélie Fabien, U. Johnson Alengaram, Nordine Leklou, Mahmoud N. Hamdadou, Alexandra Bourdot, Stéphanie Gascoin, Sustainability Switzerland, Vol. 13, number 6504, issue 11 (2021), doi:10.3390/su13116504
Effect of roughness of mussels on cylinder forces from a realistic shape modelling, Antoine Marty, Franck Schoefs, Thomas Soulard, Christian Berhault, Jean Valery Facq, Benoît Gaurier, Gregory Germain, Journal of Marine Science and Engineering, Vol. 9, number 598, issue 6 (2021), doi:10.3390/jmse9060598
Agent-based simulation of hindering effect of small group behavior on elevated interval evacuation time along urban rail transit, Zihua Pan, Qingchao Wei, Huan Wang, Travel Behaviour and Society, Vol. 22, issue 2, pp. 262-273 (2021), doi:10.1016/j.tbs.2020.10.007
Cyclic and creep combination effects on the long-term undrained behavior of overconsolidated clay, Jian Han, Zhen Yu Yin, Christophe Dano, Pierre Yves Hicher, Acta Geotechnica, Vol. 16, issue 4, pp. 1027-1041 (2021), doi:10.1007/s11440-020-01078-5
In-situ synchrotron characterisation of fracture initiation and propagation in shales during indentation, Lin Ma, Anne Laure Fauchille, Michael R. Chandler, Patrick Dowey, Kevin G. Taylor, Julian Mecklenburgh, Peter D. Lee, Energy, Vol. 215, number 119161, issue 12 (2021), doi:10.1016/j.energy.2020.119161
A multiaxis tool path generation approach for thin wall structures made with waam, Matthieu Rauch, Jean Yves Hascoet, Vincent Querard, Journal of Manufacturing and Materials Processing, Vol. 5, number 128, issue 4 (2021), doi:10.3390/jmmp5040128
Polydopamine coated Si nanoparticles allow for improved mechanical and electrochemical stability, Utkarsh Ahuja, Bo Wang, Pu Hu, Julien Rethore, Katerina E. Aifantis, Electrochimica Acta, Vol. 392, number 138993, issue 27 (2021), doi:10.1016/j.electacta.2021.138993
On the determination of acoustic emission wave propagation velocity in composite sandwich structures, Yuan Wu, Marianne Perrin, Marie Laetitia Pastor, Pascal Casari, Xiaojing Gong, Composite Structures, Vol. 259, number 113231, issue 9 (2021), doi:10.1016/j.compstruct.2020.113231
Novel control model of Contact-Tip-to-Work Distance (CTWD) for sound monitoring of arc-based DED processes based on spectral analysis, Alexia Chabot, Matthieu Rauch, Jean Yves Hascoët, International Journal of Advanced Manufacturing Technology, Vol. 116, issue 11-12, pp. 3463-3472 (2021), doi:10.1007/s00170-021-07621-2
Open-source carbon footprint estimator: Development and university declination, Clément Auger, Benoit Hilloulin, Benjamin Boisserie, Maël Thomas, Quentin Guignard, Emmanuel Rozière, Sustainability Switzerland, Vol. 13, number 4315, issue 8 (2021), doi:10.3390/su13084315
Non-negative moment fitting quadrature rules for fictitious domain methods, Grégory Legrain, Computers and Mathematics with Applications, Vol. 99, issue 1, pp. 270-291 (2021), doi:10.1016/j.camwa.2021.07.019
Probing magnetic pulse welding of aluminium and steel sheets, Rishabh Shotri, Guillaume Racineux, Amitava De, Journal of Manufacturing Processes, Vol. 72, issue 2, pp. 309-319 (2021), doi:10.1016/j.jmapro.2021.10.029
Enhanced impact-resistance of aeronautical quasi-isotropic composite plates through diffused water molecules in epoxy, Furqan Ahmad, Fethi Abbassi, Mazhar Ul-Islam, Frédéric Jacquemin, Jung Wuk Hong, Scientific Reports, Vol. 11, number 7440, issue 1 (2021), doi:10.1038/s41598-021-81443-w
Design of concrete : Setting a new basis for improving both durability and environmental performance, Anne Ventura, Van Loc Ta, Tristan Senga Kiessé, Stéphanie Bonnet, Journal of Industrial Ecology, Vol. 25, issue 1, pp. 233-247 (2021), doi:10.1111/jiec.13059
Construction of physical welding windows for magnetic pulse welding of 5754 aluminum with DC04 steel, C. Khalil, S. Marya, G. Racineux, International Journal of Material Forming, Vol. 14, issue 5, pp. 843-854 (2021), doi:10.1007/s12289-020-01597-2
Effect of salt spray ageing on the fracture of composite-to-metal bonded joints, M. M. Arouche, M. N. Saleh, S. Teixeira de Freitas, S. de Barros, International Journal of Adhesion and Adhesives, Vol. 108, number 102885, issue 5 (2021), doi:10.1016/j.ijadhadh.2021.102885
Vacuum-Bag-Only (VBO) Molding of Flax Fiber-reinforced Thermoplastic Composites for Naval Shipyards, V. Popineau, A. Célino, M. Le Gall, L. Martineau, C. Baley, A. Le Duigou, Applied Composite Materials, Vol. 28, issue 3, pp. 791-808 (2021), doi:10.1007/s10443-021-09890-2
A new Delaunay triangulation-based approach to characterize the pore network in granular materials, Ngoc Son Nguyen, Habib Taha, Didier Marot, Acta Geotechnica, Vol. 16, issue 7, pp. 2111-2129 (2021), doi:10.1007/s11440-021-01157-1
On the influence of glass fiber mat on the mixed-mode fracture of composite-to-metal bonded joints, Marcio Moreira Arouche, Sofia Teixeira de Freitas, Silvio de Barros, Composite Structures, Vol. 256, number 113109, issue 3 (2021), doi:10.1016/j.compstruct.2020.113109
Plant Extraction and Physicochemical Characterizations of Untreated and Pretreated Diss Fibers (Ampelodesmos mauritanicus), Mustapha Nouri, Ismail Griballah, Mahfoud Tahlaiti, Fréderic Grondin, Johnny Beaugrand, Journal of Natural Fibers, Vol. 18, issue 8, pp. 1083-1093 (2021), doi:10.1080/15440478.2019.1687062
Assessment of the effect of fiber percentage in glass fiber reinforced slag-based geopolymer, Lais Alves, Nordine Leklou, Fabio de Souza, Silvio De Barros, Journal of Asian Ceramic Societies, Vol. 9, issue 3, pp. 1265-1274 (2021), doi:10.1080/21870764.2021.1966977
The SOLENE-microclimat model: Potentiality for comfort and energy studies, Marjorie Musy, Marie Hélène Azam, Sihem Guernouti, Benjamin Morille, Auline Rodler, ISBN:[9783030654207, 9783030654214] (2021), doi:10.1007/978-3-030-65421-4_13
Unified phase field model to simulate both intergranular and transgranular failure in polycrystalline aggregates, Soukaina Riad, Didier Bardel, Julien Réthoré, Finite Elements in Analysis and Design, Vol. 194, number 103555 (2021), doi:10.1016/j.finel.2021.103555
Chemical shrinkage of low water to cement (W/c) ratio cem i and cem iii cement pastes incorporating silica fume and filler, Judy Kheir, Benoît Hilloulin, Ahmed Loukili, Nele De Belie, Materials, Vol. 14, number 1164, issue 5, pp. 1-13 (2021), doi:10.3390/ma14051164
Capturing the stress evolution in electrode materials that undergo phase transformations during electrochemical cycling, Bo Wang, Julien Réthoré, Katerina E. Aifantis, International Journal of Solids and Structures, Vol. 224, number 111032 (2021), doi:10.1016/j.ijsolstr.2021.03.019
Statistical soil characterization of an underground corroded pipeline using in-line inspections, Rafael Amaya-Gómez, Emilio Bastidas-Arteaga, Felipe Muñoz, Mauricio Sánchez-Silva, Metals, Vol. 11, number 292, issue 2, pp. 1-22 (2021), doi:10.3390/met11020292
Scaling Laws for Rigid-Body Response of Masonry Structures under Blast Loads, Filippo Masi, Ioannis Stefanou, Victor Maffi-Berthier, Journal of Engineering Mechanics, Vol. 147, number 73, issue 10 (2021), doi:10.1061/(ASCE)EM.1943-7889.0001986
Numerical and experimental study of a multimode optical fiber sensor based on Fresnel reflection at the fiber tip for refractive index measurement, Antoine Brientin, Dominique Leduc, Virginie Gaillard, Marion Girard, Cyril Lupi, Optics and Laser Technology, Vol. 143, number 107315, issue 3 (2021), doi:10.1016/j.optlastec.2021.107315
Data-driven reduced homogenization for transient diffusion problems with emergent history effects, Abdullah Waseem, Thomas Heuzé, Marc G.D. Geers, Varvara G. Kouznetsova, Laurent Stainier, Computer Methods in Applied Mechanics and Engineering, Vol. 380, number 113773, issue 9 (2021), doi:10.1016/j.cma.2021.113773
Interface direct shear tests on jez-1 mars regolith simulant, Kexin Yin, Jiangxin Liu, Jiaxing Lin, Andreea Roxana Vasilescu, Khaoula Othmani, Eugenia Di Filippo, Applied Sciences Switzerland, Vol. 11, number 7052, issue 15 (2021), doi:10.3390/app11157052
Lipschitz regularization for softening material models: The Lip-field approach, Nicolas Moës, Nicolas Chevaugeon, Comptes Rendus Mecanique, Vol. 349, issue 2, pp. 415-434 (2021), doi:10.5802/CRMECA.91
An entropy-stable Smooth Particle Hydrodynamics algorithm for large strain thermo-elasticity, Ataollah Ghavamian, Chun Hean Lee, Antonio J. Gil, Javier Bonet, Thomas Heuzé, Laurent Stainier, Computer Methods in Applied Mechanics and Engineering, Vol. 379, number 113736, issue 1 (2021), doi:10.1016/j.cma.2021.113736
Experimental Investigation of Allotropic Transformation of Cobalt: Influence of Temperature Cycle, Mechanical Loading and Starting Microstructure, Nadjib Iskounen, Pierre Antoine Dubos, Jamal Fajoui, Michel Coret, Marie José Moya, Baptiste Girault, Nicolas Barrier, Nicolas Bruzy, Eric Hug, David Gloaguen, Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, Vol. 52, issue 4, pp. 1477-1491 (2021), doi:10.1007/s11661-021-06142-7
Fractal dimension as an effective feature for characterizing hard marine growth roughness from underwater image processing in controlled and uncontrolled image environments, Franck Schoefs, Michael O’byrne, Vikram Pakrashi, Bidisha Ghosh, Mestapha Oumouni, Thomas Soulard, Marine Reynaud, Journal of Marine Science and Engineering, Vol. 9, number 1344, issue 12 (2021), doi:10.3390/jmse9121344
Multiscale analysis of brittle failure in heterogeneous materials, Elie Eid, Rian Seghir, Julien Réthoré, Journal of the Mechanics and Physics of Solids, Vol. 146, number 104204, issue 8 (2021), doi:10.1016/j.jmps.2020.104204
Analysis of volumetric internal erosion in cohesionless soils: Model, experiments and simulations, Rachel Gelet, Alaa Kodieh, Didier Marot, Ngoc Son Nguyen, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 45, issue 18, pp. 2780-2806 (2021), doi:10.1002/nag.3286
A procedure to prepare sand–clay mixture samples for soil–structure interface direct shear tests, Kexin Yin, Jiangxin Liu, Andreea Roxana Vasilescu, Eugenia Di Filippo, Khaoula Othmani, Applied Sciences Switzerland, Vol. 11, number 5337, issue 12 (2021), doi:10.3390/app11125337
Deterministic modeling of solidification microstructure formation in directed energy deposition fabricated Ti6Al4V, Jinghao Li, Xianglin Zhou, Qingbo Meng, Mathieu Brochu, Nejib Chekir, J. J. Sixsmith, J. Y. Hascoët, Yaoyao Fiona Zhao, Additive Manufacturing, Vol. 46, number 102182, issue 7 (2021), doi:10.1016/j.addma.2021.102182
Size effects in cobalt plastically strained in tension: Impact on gliding and twinning work hardening mechanisms, Eric Hug, Clément Keller, Pierre Antoine Dubos, Mayerling Martinez Celis, Journal of Materials Research and Technology, Vol. 11, issue 16, pp. 1362-1377 (2021), doi:10.1016/j.jmrt.2021.01.105
Effect of strain rate on the adhesive bond shearing resistance of stiff clay, Jian Han, Zhen Yu Yin, Christophe Dano, Pierre Yves Hicher, Transportation Geotechnics, Vol. 27, number 100479, issue 1 (2021), doi:10.1016/j.trgeo.2020.100479
Numerical modeling of soil–pipe interaction of single pipeline at shallow embedment in clay by hypoplastic macroelement, Zhuang Jin, Zheng Li, Zhen yu Yin, Panagiotis Kotronis, Ocean Engineering, Vol. 241, number 110017, issue 10 (2021), doi:10.1016/j.oceaneng.2021.110017
Towards common specifications for low- and high-expansion cement-based materials exposed to external sulphate attacks, Sonia Boudache, Emmanuel Rozière, Ahmed Loukili, Laurent Izoret, Construction and Building Materials, Vol. 294, number 123586, issue 4 (2021), doi:10.1016/j.conbuildmat.2021.123586
Investigation of the nonlinear slamming-induced whipping response of ships using a fully-coupled hydroelastoplastic method, George Jagite, Quentin Derbanne, Sime Malenica, Fabien Bigot, Herve Le Sourne, Patrice Cartraud, Ocean Engineering, Vol. 238, number 109751, issue 34 (2021), doi:10.1016/j.oceaneng.2021.109751
On the use of embedded fiber optic sensors for measuring early‐age strains in concrete, K. K.Santos Silva, F. A.N. Silva, T. Mahfoud, A. Khelidj, A. Brientin, A. C. Azevedo, J. M.P.Q. Delgado, A. G.Barbosa de Lima, Sensors, Vol. 21, number 4171, issue 12 (2021), doi:10.3390/s21124171
Improvement of mechanical properties of hydroxyapatite composites reinforced with i-Al64Cu23Fe13 quasicrystal, José Castañeda-Vía, Carlos V. Landauro, Justiniano Quispe-Marcatoma, Ana Champi, Fred Montalvo, Leyla Delgado, Lidia Yileng Tay, Marie José Moya, Ronald Guillén, Francisco Rumiche, Victor Peña-Rodríguez, Journal of Composite Materials, Vol. 55, issue 9, pp. 1209-1216 (2021), doi:10.1177/0021998320964553
Material Modeling via Thermodynamics-Based Artificial Neural Networks, Filippo Masi, Ioannis Stefanou, Paolo Vannucci, Victor Maffi-Berthier, Springer Proceedings in Mathematics and Statistics, Vol. 361, pp. 308-329, ISBN:[9783030779566] (2021), doi:10.1007/978-3-030-77957-3_16
A multistage stochastic program for the design and management of flexible infrastructure networks, Samuel Torres-Rincón, Mauricio Sánchez-Silva, Emilio Bastidas-Arteaga, Reliability Engineering and System Safety, Vol. 210, number 107549, issue 3 (2021), doi:10.1016/j.ress.2021.107549
Estimating normal effective stress degradation in sand under undrained simple shear condition, Ze Xiang Wu, Christophe Dano, Pierre Yves Hicher, Zhen Yu Yin, European Journal of Environmental and Civil Engineering, Vol. 25, issue 1, pp. 170-189 (2021), doi:10.1080/19648189.2018.1521750
From dislocation nucleation to dislocation multiplication in ceramic nanoparticle, Inas Issa, Lucile Joly-Pottuz, Jonathan Amodeo, David J. Dunstan, Claude Esnouf, Julien Réthoré, Vincent Garnier, Jérôme Chevalier, Karine Masenelli-Varlot, Materials Research Letters, Vol. 9, issue 6, pp. 278-283 (2021), doi:10.1080/21663831.2021.1894253
Investigation of residual stresses in planar dissimilar magnetic pulse welds by neutron diffraction, M. N. Avettand-Fènoël, T. Sapanathan, T. Pirling, G. Racineux, A. Simar, J. M. Drezet, Journal of Manufacturing Processes, Vol. 68, issue 2, pp. 1758-1766 (2021), doi:10.1016/j.jmapro.2021.06.071
Fiber-matrix bond strength by pull-out tests on slag-based geopolymer with embedded glass and carbon fibers, Lais Alves, Nordine Leklou, Pascal Casari, Silvio de Barros, Journal of Adhesion Science and Technology, Vol. 35, issue 18, pp. 2035-2045 (2021), doi:10.1080/01694243.2020.1870322
Investigation of microstructural and mechanical properties of partially hydrated Asbestos-Free fiber cement waste (AFFC) based concretes: Experimental study and predictive modeling, Harifidy Ranaivomanana, Nordine Leklou, Construction and Building Materials, Vol. 277, number 121943, issue 2 (2021), doi:10.1016/j.conbuildmat.2020.121943
Reduced order modeling of selective laser melting: from calibration to parametric part distortion, Chady Ghnatios, Khalil El Rai, Nicolas Hascoet, Pierre Adrien Pires, Jean Louis Duval, Jon Lambarri, Jean Yves Hascoet, Francisco Chinesta, International Journal of Material Forming, Vol. 14, issue 5, pp. 973-986 (2021), doi:10.1007/s12289-021-01613-z
Reactivity of Recycled Aggregates Used for Pavement Base: From Field to Laboratory, Jean David Lau Hiu Hoong, Yunlu Hou, Philippe Turcry, Pierre Yves Mahieux, Hakim Hamdoun, Ouali Amiri, Jérôme Lux, Abdelkarim Aït-Mokhtar, Journal of Materials in Civil Engineering, Vol. 33, number 85, issue 6 (2021), doi:10.1061/(ASCE)MT.1943-5533.0003661
The Influence of Mixing Orders on the Microstructure of Artificially Prepared Sand-Clay Mixtures, Kexin Yin, Anne Laure Fauchille, Eugenia Di Filippo, Khaoula Othmani, Samuel Branchu, Giulio Sciarra, Panagiotis Kotronis, Advances in Materials Science and Engineering, Vol. 2021, issue 1 (2021), doi:10.1155/2021/8552224
Lattice strain development in an alpha titanium alloy studied using synchrotron and neutron diffraction, Kodjo Emmanuel Agbovi, Baptiste Girault, Jamal Fajoui, Saurabh Kabra, Winfried Kockelmann, Thomas Buslaps, Agnieszka Poulain, David Gloaguen, Materials Science and Engineering A, Vol. 819, number 141489 (2021), doi:10.1016/j.msea.2021.141489
Rapid assessment of ship raking grounding on elliptic paraboloid shaped rock, J. P. Pineau, H. Le Sourne, Z. Soulhi, Ships and Offshore Structures, Vol. 16, issue sup1, pp. 106-121 (2021), doi:10.1080/17445302.2021.1927357
Spatial variability assessment of structures from adaptive NDT measurements, Mestapha Oumouni, Franck Schoefs, Structural Safety, Vol. 89, number 102052, issue 4 (2021), doi:10.1016/j.strusafe.2020.102052
Probabilistic and sensitivity analysis of analytical models of corrosion onset for reinforced concrete structures, Ndrianary Rakotovao Ravahatra, Emilio Bastidas-Arteaga, Franck Schoefs, Thomas de Larrard, Frédéric Duprat, European Journal of Environmental and Civil Engineering, Vol. 25, issue 9, pp. 1665-1694 (2021), doi:10.1080/19648189.2019.1591307
Urban microclimate and building energy simulation coupling techniques, Auline Rodler, Nicolas Lauzet, Marjorie Musy, Marie Hélène Azam, Sihem Guernouti, Dasaraden Mauree, Thibaut Colinart, ISBN:[9783030654207, 9783030654214] (2021), doi:10.1007/978-3-030-65421-4_15
A novel method for additive manufacturing of complex shape curved parts by using variable height layers, Matthieu Rauch, Jorge Piedra Dorado, Jean Yves Hascoet, Guillaume Ruckert, Journal of Machine Engineering, Vol. 21, pp. 80-91 (2021), doi:10.36897/jme/138820
A flexibility-based approach for the design and management of floating offshore wind farms, Samuel Torres-Rincón, Emilio Bastidas-Arteaga, Mauricio Sánchez-Silva, Renewable Energy, Vol. 175, issue 2, pp. 910-925 (2021), doi:10.1016/j.renene.2021.04.121
A Perturbed Markovian process with state-dependent increments and measurement uncertainty in degradation modeling, M. Oumouni, F. Schoefs, Computer Aided Civil and Infrastructure Engineering, Vol. 36, issue 8, pp. 978-995 (2021), doi:10.1111/mice.12644
Characterization of microcracking of NCF composites under accelerated hygrothermal cycles: Influence of the stitching yarn and the style of biaxial NCF, H. Bezzou, M. Péron, P. Casari, V. Singery, D. Ponsolle, F. Jacquemin, Composites Part A Applied Science and Manufacturing, Vol. 149, number 106507 (2021), doi:10.1016/j.compositesa.2021.106507
Two-scale analysis of transient diffusion problems through a homogenized enriched continuum, A. Waseem, T. Heuzé, L. Stainier, M. G.D. Geers, V. G. Kouznetsova, European Journal of Mechanics A Solids, Vol. 87, number 104212, issue 5 (2021), doi:10.1016/j.euromechsol.2021.104212
Metrological assessment of multi-sensor camera technology for spatially-resolved ultra-high-speed imaging of transient high strain-rate deformation processes, Adrien Vinel, Rian Seghir, Julien Berthe, Gérald Portemont, Julien Réthoré, Strain, Vol. 57, issue 4 (2021), doi:10.1111/str.12381
Elastic guided waves in helical multi-wire armors, F. Treyssède, L. Laguerre, P. Cartraud, T. Soulard, Ultrasonics, Vol. 110, number 106294, issue 11 (2021), doi:10.1016/j.ultras.2020.106294
Influence of initial material properties on the degradation of mortars with low expansion cements subjected to external sulfate attack, Sonia Boudache, Ahmed Loukili, Emmanuel Rozière, Laurent Izoret, Materials and Structures Materiaux Et Constructions, Vol. 54, number 1275, issue 3 (2021), doi:10.1617/s11527-021-01709-7
Chloride ions’ penetration of fly ash and ground granulated blast furnace slags-based alkali-activated mortars, Patrycja Duży, Mateusz Sitarz, Marcin Adamczyk, Marta Choińska, Izabela Hager, Materials, Vol. 14, number 6583, issue 21 (2021), doi:10.3390/ma14216583
Chondrogenic and BMP-4 primings confer osteogenesis potential to human cord blood mesenchymal stromal cells delivered with biphasic calcium phosphate ceramics, Meadhbh Brennan, Mario Barilani, Francesco Rusconi, Julien de Lima, Luciano Vidal, Cristiana Lavazza, Lorenza Lazzari, Rosaria Giordano, Pierre Layrolle, Scientific Reports, Vol. 11, number 143, issue 1 (2021), doi:10.1038/s41598-021-86147-9
Theoretical solution for the axial vibration of functionally graded double-lap adhesive joints, Shadi A. Sindi, Ramzi Othman, Khalid H. Almitani, Mathematics and Mechanics of Solids, Vol. 26, issue 6, pp. 823-842 (2021), doi:10.1177/1081286520967709
Design of Sand-Based, 3-D-Printed Analog Faults With Controlled Frictional Properties, Philipp Braun, Georgios Tzortzopoulos, Ioannis Stefanou, Journal of Geophysical Research Solid Earth, Vol. 126, number 245, issue 5 (2021), doi:10.1029/2020JB020520
Benchmarking virtual permeability predictions of real fibrous microstructure, David May, Elena Syerko, Tim Schmidt, Christophe Binetruy, Luisa Rocha da Silva, Stepan Lomov, Suresh Advani, 36th Technical Conference of the American Society for Composites 2021 Composites Ingenuity Taking on Challenges in Environment Energy Economy ASC 2021, Vol. 3, pp. 2123-2132, ISBN:[9781713837596] (2021)
Absorbent Porous Paper Reveals How Earthquakes Could be Mitigated, G. Tzortzopoulos, P. Braun, I. Stefanou, Geophysical Research Letters, Vol. 48, number 245, issue 3 (2021), doi:10.1029/2020GL090792
Diagnosis and assessment of deep pile cap foundation of a tall building affected by internal expansion reactions, Fernando A.N. Silva, João M.P.Q. Delgado, António C. Azevedo, Tahlaiti Mahfoud, Abdelhafid Khelidj, Nicole Nascimento, António G.B. Lima, Buildings, Vol. 11, number 104, issue 3 (2021), doi:10.3390/buildings11030104
Creep and shrinkage behaviour of disintegrated and non-disintegrated cement mortar, Rihards Gailitis, Beata Figiela, Kalvis Abelkalns, Andina Sprince, Genadijs Sahmenko, Marta Choinska, Martin Duarte Guigou, Materials, Vol. 14, number 7510, issue 24 (2021), doi:10.3390/ma14247510
Bounding the multi-scale domain in numerical modelling and meta-heuristics optimization: Application to poroelastic media with damageable cracks, Albert Argilaga, Efthymios Papachristos, Materials, Vol. 14, number 3974, issue 14 (2021), doi:10.3390/ma14143974
Finite element implementation and application of a sand model in micropolar theory, Jiangxin Liu, Zhen Yu Yin, Lijian Wu, Pierre Yves Hicher, SN Applied Sciences, Vol. 3, number 465, issue 8 (2021), doi:10.1007/s42452-021-04708-z
Fragility analysis of concrete elevated water tanks under seismic loads, Amar Aliche, Hocine Hammoum, Karima Bouzelha, Younes Aoues, Ouali Amiri, Youcef Mehani, Frattura Ed Integrita Strutturale, Vol. 15, issue 57, pp. 93-113 (2021), doi:10.3221/IGF-ESIS.57.09
Concrete in a severe freezing environment: a meteorological characterization, Laurent Izoret, Sara Al Haj Sleiman, Nadare Matoiri-Chaibati, Frédéric Grondin, Materials and Structures Materiaux Et Constructions, Vol. 54, number 896, issue 1 (2021), doi:10.1617/s11527-020-01603-8
Dimensional variation and evolution of mechanical properties of wet aged composites reinforced with flax fibers, Ziad El Hachem, Amandine Célino, Georges Challita, Samuel Branchu, Antoine Le Duigou, Sylvain Fréour, Journal of Composite Materials, Vol. 55, issue 8, pp. 1131-1148 (2021), doi:10.1177/0021998320966045
The role played by viscoelasticity in the bulk material during the propagation of a dynamic crack in elastomers, Vasudevan Kamasamudram, Michel Coret, Nicolas Moës, International Journal of Fracture, Vol. 231, number 431, issue 56, pp. 43-58 (2021), doi:10.1007/s10704-021-00561-8
Contribution of the capillary pressure second-order term on fast drying of cement-based materials, Yuliang Zou, Mazen Saad, Frédéric Grondin, Construction and Building Materials, Vol. 296, number 123422, issue 5 (2021), doi:10.1016/j.conbuildmat.2021.123422
A new mechanism-based temperature-dependent viscoelastic model for unidirectional polymer matrix composites based on Cartan decomposition, L. Di Gennaro, F. Daghia, M. Olive, F. Jacquemin, D. Espinassou, European Journal of Mechanics A Solids, Vol. 90, number 104364, issue 2217 (2021), doi:10.1016/j.euromechsol.2021.104364
Deflections of pneumatic masts and columns, J. C. Thomas, A. Le Van, Architectural Engineering and Design Management, Vol. 17, issue 3-4, pp. 299-315 (2021), doi:10.1080/17452007.2020.1738998
Magnetic pulse hybrid joining of polymer composites to metals, Chady Khalil, Surendar Marya, Guillaume Racineux, Metals, Vol. 11, number 2001, issue 12 (2021), doi:10.3390/met11122001
Adherence of geopolymer and pultruded composite substrates: influence of adhesive type and surface treatment, Ana Passos, Ricardo de Aguiar, Hector Costa, Eduardo Sampaio, Silvio de Barros, Journal of Adhesion Science and Technology, Vol. 35, issue 16, pp. 1723-1733 (2021), doi:10.1080/01694243.2020.1859240
Effect of re-saturation after drying on hydric and strength behaviour of mortar, I. Yurtdas, N. Leklou, Materials and Structures Materiaux Et Constructions, Vol. 54, number 129, issue 5 (2021), doi:10.1617/s11527-021-01780-0
A coupled closed-form/Doubly Asymptotic Approximation approach for the response of orthotropic plates subjected to an underwater explosion, Ye Pyae Sone Oo, Hervé Le Sourne, Olivier Dorival, Ships and Offshore Structures, Vol. 16, issue sup1, pp. 171-185 (2021), doi:10.1080/17445302.2021.1918962
Measuring coarse grain deformation by digital image correlation, Claire Silvani, Julien Réthoré, Sylvie Nicaise, Strain, Vol. 57, number 3, issue 3 (2021), doi:10.1111/str.12378
Simple and Versatile Analytical Method for Monitoring the Deposition of Thin Layers by Optical Measurement and Calculation of Residual Stress, Quentin Hatte, Mireille Richard-Plouet, Pierre Yves Jouan, Pascal Casari, Pierre Antoine Dubos, Thin Solid Films, Vol. 725, number 138635 (2021), doi:10.1016/j.tsf.2021.138635
Multifield variational formulations of diffusion initial boundary value problems, Jorge de Anda Salazar, Thomas Heuzé, Laurent Stainier, Continuum Mechanics and Thermodynamics, Vol. 33, issue 2, pp. 563-589 (2021), doi:10.1007/s00161-020-00931-y
Inverse methodology as applied to reconstruct local textile features from measured pressure field, S. Bancora, C. Binetruy, S. Advani, S. Comas-Cardona, Journal of Materials Science and Technology, Vol. 71, pp. 241-247 (2021), doi:10.1016/j.jmst.2020.09.010
A numerical investigation to determine the p–y curves of laterally loaded piles, Kexin Yin, Lianghui Li, Eugenia Di Filippo, Mathematics, Vol. 9, number 2783, issue 21 (2021), doi:10.3390/math9212783
Thermal monitoring for metallic additive manufacturing multi-beads multi-layers parts, Matthieu Rauch, Jean Yves Hascoet, Clement Rousseau, Guillaume Ruckert, Journal of Machine Engineering, Vol. 21, pp. 92-100 (2021), doi:10.36897/jme/139158
Development of a damage viscoelastic model using the thick level set approach to fracture: 1D modeling and comparison to uniaxial tension stress tests on bituminous specimens, Benjamin Shiferaw, Olivier Chupin, Jean Michel Piau, Nicolas Moës, Engineering Fracture Mechanics, Vol. 257, number 108026, issue 4 (2021), doi:10.1016/j.engfracmech.2021.108026
Extending High Value Components Performances with Additive Manufacturing: Application to Naval Applications, Matthieu Rauch, Gatien Pechet, Jean Yves Hascoet, Guillaume Ruckert, Solid State Phenomena, Vol. 319, pp. 58-62 (2021), doi:10.4028/www.scientific.net/SSP.319.58
Development of Analytical Formulae to Determine the Response of Submerged Composite Plates Subjected to Underwater Explosion, Ye Pyae Sone Oo, Hervé Le Sourne, Olivier Dorival, Practical Design of Ships and Other Floating Structures, Vol. 64 LNCE, pp. 270-290, ISBN:[9789811546716] (2021), doi:10.1007/978-981-15-4672-3_17
Temporal analysis of the performance of an elevated concrete tank considering the corrosion of the steel reinforcement, Nassima Miloudi, Karima Bouzelha, Hocine Hammoum, Younes Aoues, Ouali Amiri, Frattura Ed Integrita Strutturale, Vol. 15, issue 56, pp. 94-114 (2021), doi:10.3221/IGF-ESIS.56.08
Response of composite plates in air-backed and water-backed conditions subjected to a far-field underwater explosion, Y. P.Sone Oo, H. Le Sourne, O. Dorival, Vol. 2021, pp. 74-84 (2021), doi:10.1201/9781003230373-9
Stochastic Carbon Dioxide Forecasting Model for Concrete Durability Applications, Bassel Habeeb, Emilio Bastidas-Arteaga, Helena Gervásio, Maria Nogal, 18th International Probabilistic Workshop, Vol. 153 LNCE, pp. 753-765, ISBN:[9783030736156] (2021), doi:10.1007/978-3-030-73616-3_58
Macroelements for soil-structure interaction, Diana Salciarini, Stéphane Grange, Claudio Tamagnini, Panagiotis Kotronis, ISBN:[9781786307989, 9781119887690] (2021), doi:10.1002/9781119887690.ch4
Investigation of the reversible response of track ballast considering complementary approaches, Olivier Chupin, Jean Michel Piau, Antoine Martin, Christophe Dano, Pierre Yves Hicher, Transportation Geotechnics, Vol. 26, number 100436, issue 6 (2021), doi:10.1016/j.trgeo.2020.100436
Fundamentals of Bifurcation Theory and Stability Analysis, Ioannis Stefanou, Sotiris Alevizos, ISBN:[9781789450002, 9781119755203] (2021), doi:10.1002/9781119755203.ch2
Numerical Modeling of Multiphysics Couplings and Strain Localization, Frédéric Collin, Panagiotis Kotronis, Benoît Pardoen, ISBN:[9781789450002, 9781119755203] (2021), doi:10.1002/9781119755203.ch7
Dynamic view of critical state regime in granular materials: a mesoscale perspective, Na Deng, Antoine Wautier, Yannick Thiery, Zhen Yu Yin, Pierre Yves Hicher, François Nicot, EPJ Web of Conferences, Powders and Grains 2021 9th International Conference on Micromechanics on Granular Media (2021), doi:10.1051/epjconf/202124911011
Curling evolution of a cementitious slab: experimental study and discrete element modelling, Reda Jaafri, Faten Souayfan, Ran Zhu, Syed Yasir Alam, Emmanuel Roziere, Ahmed Loukili, Materials and Structures Materiaux Et Constructions, Vol. 54, number 22, issue 1 (2021), doi:10.1617/s11527-020-01606-5
Mechanical Characterization of a Composite Sandwich Core Under Shear Stress Based on a Torsion Test, Karim Mharsi, Pascal Casari, Amira Sellami, Jamal Fajoui, Mohamed Kchaou, Advances in Mechanical Engineering, Materials and Mechanics, pp. 299-305, ISBN:978-3-030-52070-0, [9783030520700], Springer International Publishing, (2021), doi:10.1007/978-3-030-52071-7_41
Instabilities Modeling in Geomechanics, Ioannis Stefanou, Jean Sulem, ISBN:[9781789450002, 9781119755203] (2021), doi:10.1002/9781119755203
Octree optimized micrometric fibrous microstructure generation for domain reconstruction and flow simulation, Nesrine Aissa, Louis Douteau, Emmanuelle Abisset-Chavanne, Hugues Digonnet, Patrice Laure, Luisa Silva, Entropy, Vol. 23, number 1156, issue 9 (2021), doi:10.3390/e23091156
Characterization of mesoscale geometrical features of a preform using spectral Moiré analysis on pressure print, S. Bancora, C. Binetruy, S. Advani, S. Comas-Cardona, Composites Part A Applied Science and Manufacturing, Vol. 150, number 106608, issue 6 (2021), doi:10.1016/j.compositesa.2021.106608
High-frequency leaky whispering-gallery modes in embedded elastic spheres, Fabien Treyssède, Matthieu Gallezot, Physical Review B, Vol. 104, number 25, issue 21 (2021), doi:10.1103/PhysRevB.104.214101
On damage regularity defect nucleation modelling, Claude Stolz, International Journal of Solids and Structures, Vol. 229, number 111107, issue 3 (2021), doi:10.1016/j.ijsolstr.2021.111107
A generalized Fourier transform by means of change of variables within multilinear approximation, Mathilde Chevreuil, Myriam Slama, Advanced Modeling and Simulation in Engineering Sciences, Vol. 8, number 773, issue 1 (2021), doi:10.1186/s40323-021-00202-8
Residual stresses developed in thermoplastic composites during laser-assisted tape laying, Anna Maria El Bayssari, Frédéric Jacquemin, Mael Péron, Anaïs Barasinski, Fédérica Daghia, Damien Guillon, ESAFORM 2021, Esaform 2021 24th International Conference on Material Forming, ISBN:[9782870193020] (2021), doi:10.25518/esaform21.2667
Introduction, Ioannis Stefanou, Jean Sulem, ISBN:[9781789450002, 9781119755203] (2021)
Correction to: The role played by viscoelasticity in the bulk material during the propagation of a dynamic crack in elastomers (International Journal of Fracture, (2021), 10.1007/s10704-021-00561-8), Vasudevan Kamasamudram, Michel Coret, Nicolas Moës, International Journal of Fracture, Vol. 231, pp. 59 (2021), doi:10.1007/s10704-021-00573-4
Stochastic river flow forecasting using a Markov-switching autoregressive model, Bassel Habeeb, Emilio Bastidas-Arteaga, Mauricio Sánchez-Silva, Proceedings of the 31st European Safety and Reliability Conference Esrel 2021, pp. 1512-1517, ISBN:[9789811820168] (2021), doi:10.3850/978-981-18-2016-8_654-cd
Chloride ions penetration of alkali-activated fly ash mortars with ground granulated blast furnace slag, Patrycja Duży, Mateusz Sitarz, Marcin Adamczyk, Marta Choińska, Izabela Hager, Fib Symposium, Vol. 2021-June, pp. 284-293, ISBN:[9782940643080] (2021)
Impact of Super Absorbent Polymers on Early Age Behavior of High Performance Concrete Walls, J. Kheir, L. De Meyst, J. R. Tenòrio Filho, T. A. Hammer, A. Klausen, B. Hilloulin, A. Loukili, N. De Belie, Proceedings of the 3rd RILEM Spring Convention and Conference (RSCC 2020), Vol. 33, pp. 49-58 (2021), doi:10.1007/978-3-030-76551-4_5
EFFECT OF MINERAL ADDITIONS ON THE SELF-HEALING ABILITY OF CEMENTITIOUS MATERIALS, Carol Namnoum, Benoît Hilloulin, Maxime Robira, Frédéric Grondin, Ahmed Loukili, American Concrete Institute ACI Special Publication, Vol. SP-349, pp. 1-14, ISBN:[9781641951395] (2021)
Sensitivity and reliability analysis for reinforced concrete structures subjected to cyclic loading using a polynomial chaos, Henriette Marlaine Imounga, Emilio Bastidas-Arteaga, Rostand Moutou Pitti, Serge Ekomy, Charbel Pierre El Soueidy, Proceedings of the 31st European Safety and Reliability Conference Esrel 2021, pp. 1518-1523, ISBN:[9789811820168] (2021), doi:10.3850/978-981-18-2016-8_669-cd
Computation of discretization error bounds on the fatigue damage of a shear plate, L. Mell, V. Rey, F. Schoefs, B. Rocher, Developments in Renewable Energies Offshore Proceedings the 4th International Conference on Renewable Energies Offshore Renew 2020, pp. 717-725, ISBN:[9780367681319] (2021)
Comparison of normative test methods for evaluating concrete resistance to freeze-thaw cycles to real exposure conditions, Sara Al Haj Sleiman, Laurent Izoret, Frédéric Grondin, Syed Yasir Alam, Ahmed Loukili, Fib Symposium, pp. 130-136, ISBN:[9782940643110] (2021)
Correction to: reduced order modeling of selective laser melting: from calibration to parametric part distortion (International Journal of Material Forming, (2021), 14, 5, (973-986), 10.1007/s12289-021-01613-z), Chady Ghnatios, Khalil El Rai, Nicolas Hascoet, Pierre Adrien Pires, Jean Louis Duval, Jon Lambarri, Jean Yves Hascoet, Francisco Chinesta, International Journal of Material Forming, Vol. 14, issue 5, pp. 987 (2021), doi:10.1007/s12289-021-01638-4
Computation of discretization error bounds on the fatigue damage of a shear plate, L. Mell, V. Rey, F. Schoefs, B. Rocher, Vol. 2021, pp. 717-725 (2021), doi:10.1201/9781003134572-82
Multiphysics Couplings and Strain Localization in Geomaterials, Jean Sulem, Ioannis Stefanou, ISBN:[9781789450002, 9781119755203] (2021), doi:10.1002/9781119755203.ch8
NUMERICAL MODELING OF FLOW AND STRAIN LOCALISATION IN PARTIALLY SATURATED POROUS MEDIA, M. Zaim, G. Sciarra, P. Kotronis, F. Collin, 9th International Conference on Computational Methods for Coupled Problems in Science and Engineering Coupled Problems 2021 (2021)
Mechanical states induced by Moisture Diffusion in Organic Matrix Composites: Coupled scale transition models, F. Jacquemin, S. Fréour, ISBN:[9781617288579, 9781617611445] (2021)
Editorial: Recent Advances in Service Life Prediction of Bridges and Structures, Marija Kušter Marić, Emilio Bastidas-Arteaga, Frontiers in Built Environment, Vol. 6, issue Editorial: Recent Advances in Service Life Prediction of Bridges and Structures (2021), doi:10.3389/fbuil.2020.630554
Finite element-fidelity parametrization of kriging metamodels for structutal reliability assessement, Ludovic Mell, Valentine Rey, Franck Schoefs, Proceedings of the 31st European Safety and Reliability Conference Esrel 2021, pp. 2777, ISBN:[9789811820168] (2021), doi:10.3850/978-981-18-2016-8_696-cd
Analysis of Instabilities in Faults, Hadrien Rattez, Ioannis Stefanou, Jean Sulem, Manolis Veveakis, Thomas Poulet, ISBN:[9781789450002, 9781119755203] (2021), doi:10.1002/9781119755203.ch10
Correction to: Model reduction in computational homogenization for transient heat conduction (Computational Mechanics, (2020), 65, 1, (249-266), 10.1007/s00466-019-01767-3), A. Waseem, T. Heuzé, L. Stainier, M. G.D. Geers, V. G. Kouznetsova, Computational Mechanics, Vol. 68, issue 1, pp. 231 (2021), doi:10.1007/s00466-021-02040-2
Invariant integrals and asymptotic fields near the front of a curved planar crack, C. Stolz, International Journal of Fracture, Vol. 230, number 109, issue 1, pp. 3-17 (2021), doi:10.1007/s10704-021-00552-9
Minimum Localizable Damage for Stochastic Subspace-based Damage Diagnosis, Alexander Mendler, Ambroise Cadoret, Clement Freyssinet, Michael Dohler, Yann Lecieux Laurent Mevel, Carlos Ventura, International Conference on Structural Health Monitoring of Intelligent Infrastructure Transferring Research into Practice Shmii, Vol. 2021-June, pp. 1553-1560 (2021)
Diagnostic of Concrete Samples Affected by Internal Swelling Reactions, António C. Azevedo, Fernando A.N. Silva, João M.P.Q. Delgado, Nicole P.S. Nascimento, Mahfoud Tahlaiti, Abdelhafid Khelidj, Diagnostic of Concrete Samples Affected by Internal Swelling Reactions, Vol. 21, pp. 1-75 (2021), doi:10.1007/978-3-030-76497-5
Effect of fly ash on microstructural and resistance characteristics of dredged sediment stabilized with lime and cement, Ana Paula Furlan, Andry Razakamanantsoa, Harifidy Ranaivomanana, Ouali Amiri, Daniel Levacher, Dimitri Deneele, Construction and Building Materials, Vol. 272, number 121637, issue 7 (2021), doi:10.1016/j.conbuildmat.2020.121637
Investigation of self-heating and damage progression in woven carbon fibre composite materials, following the fibres direction, under static and cyclic loading, Laura Muller, Jean Michel Roche, Antoine Hurmane, François Henri Leroy, Catherine Peyrac, Laurent Gornet, Journal of Composite Materials, Vol. 55, issue 26, pp. 3909-3924 (2021), doi:10.1177/00219983211025690
Effect of temperature on the chloride binding capacity of cementitious materials, Van Quan Tran, Hoang Long Nguyen, Dong Van Dao, Benoit Hilloulin, Long Khanh Nguyen, Quang Hung Nguyen, Tien Thinh Le, Hai Bang Ly, Magazine of Concrete Research, Vol. 73, issue 15, pp. 771-784 (2021), doi:10.1680/jmacr.19.00484
Parametric PGD model used with orthogonal polynomials to assess efficiently the building's envelope thermal performance, Marie Hélène Azam, Julien Berger, Sihem Guernouti, Philippe Poullain, Marjorie Musy, Journal of Building Performance Simulation, Vol. 14, issue 2, pp. 132-154 (2021), doi:10.1080/19401493.2020.1868577
A full three-dimensional model for the estimation of the natural frequencies of an offshore wind turbine in sand, Philip Alkhoury, Abdul Hamid Soubra, Valentine Rey, Mourad Aït-Ahmed, Wind Energy, Vol. 24, issue 7, pp. 699-719 (2021), doi:10.1002/we.2598
Effect of the simplified superstructure and soil-structure interaction models on the natural frequencies of an offshore wind turbine, Philip Alkhoury, Abdul Hamid Soubra, Valentine Rey, Mourad Aït-Ahmed, Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering OMAE, Vol. 9, ISBN:[9780791885192] (2021), doi:10.1115/OMAE2021-62472
Vibration control of an offshore wind turbine, Philip Alkhoury, Mourad Aït-Ahmed, Abdul Hamid Soubra, Valentine Rey, Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering OMAE, Vol. 9, ISBN:[9780791885192] (2021), doi:10.1115/OMAE2021-62210
Mesure et prédiction des contraintes et déformations résiduelles dans un composite PEEK/Carbone lors de la dépose de bandes assistée par laser, Anna El Bayssari, Frédéric Jacquemin, Mael Péron, Anaïs Barasinski, Federica Daghia, Damien Guillon, Journées Nationales sur les Composites (JNC 22) (2021)
Experimental Analysis of Composite-to-geopolymer Bonded Structures Using Pull off Tests, A Passos, M Arouche, R Aguiar, H Costa, E Sampaio, Silvio DE BARROS, Materials Research, Vol. 24, number 381, issue suppl 2 (2021), doi:10.1590/1980-5373-mr-2021-0461
Experimental Testing of High-Capacity Bandwidth Efficient Visible Light Communication with Silicon-based RGBY-LED, Yuhao Wang, Xuanbang Chen, Xiaodong Liu, Zhenghai Wang, Lisu Yu, Xun Zhang, 2021 IEEE International Symposium on Broadband Multimedia Systems and Broadcasting (BMSB), pp. 1-3, IEEE (2021), doi:10.1109/BMSB53066.2021.9547164
Thermal characterization of biofouling around a dynamic submarine electrical cable, Ziad Maksassi, Bertrand Garnier, Ahmed Ould El Moctar, Franck Schoefs, Congrès Français de Thermique 2021 (2021)
Multimode optical fiber sensor based on Fresnel reflection for refractive index measurement, Antoine Brientin, Dominique Leduc, Virgine Gaillard, Marion Girard, Cyril Lupi, International Symposium on Optomechatronic Technology - ISOT 2021 (2021)
Experimental characterization of pulsed arc under water, Julien Thouin, Malyk Benmouffok, Pierre Freton, Jean Jacques Gonzalez, Guillaume Racineux, 7th Euro-Asian Pulsed Power Conference (EAPPC) (2021)
Influence de la variabilité spatiale sur la probabilité de défaillance aux ELS de structures en béton armé soumises à la corrosion par pénétration d’ions chlorures, Romain Clerc, Academic Journal of Civil Engineering, Vol. 39, Academic Journal of Civil Engineering (2021), doi:10.26168/ajce.39.1.59
Learning data-driven reduced elastic and inelastic models of spot-welded patches, Agathe Reille, Victor Champaney, Fatima Daim, Yves Tourbier, Nicolas Hascoet, David Gonzalez, Elias Cueto, Jean Louis Duval, Francisco Chinesta, Mechanics & Industry, Vol. 22, number 32 (2021), doi:10.1051/meca/2021031
Etude du vieillissement mécanique d'une aile d'un drone solaire Study of the mechanical aging of a solar UAV wing, Quentin Rouxel, Pierre-Antoine Dubos, Shahram Khazaie, Simon Lucas, Benjamin David, Pascal Casari, JNC 22 (2021)
High temperature oxidation and creep behavior of pre-oxidized zircaloy-4 claddings under loca conditions, E-B Djeumen, Nicolas Tardif, Jean Desquines, Tatiana Taurines, Gergely Molnár, M.-C Baietto, Michel Coret, Alice Viretto, G. Villevieille, Philippe Chaudet, Topfuel 2021 (2021)
Analysis of the delayed damage model for three one-dimensional loading scenarii, Jihed Zghal, Nicolas Moes, Comptes Rendus. Physique, Vol. 21, issue 6, pp. 527-537 (2021), doi:10.5802/crphys.42
Influence de la température sur le comportement mécanique de pièces métalliques miniaturisées, Pierre-Antoine Dubos, Clément Keller, Mayerling Martinez Celis, Eric Hug, Journées Annuelles de la SF2M 2021 (2021)
On the influence of buoyancy forces, failure strain and friction coefficient on the damage extent of a grounded ship, Hervé Le Sourne, Jean-Philippe Pineau, C. B. Umunnakwe, Thomas Wesoly, Olivier Dorival, 8th International Conference on Marine Structures (MARSTRUCT 2021) (2021)
Effect of metakaolin addition on the mechanical performance of granulated blast furnace slag based geopolymer mortar with micro-encapsulated phase change materials, Bouha El Moustapha, Stéphanie Bonnet, Abdelhafid Khelidj, Isselmou Ahmedou Babah, Carole Charbuillet, Abderahmane Khalifa, Effect of metakaolin addition on the mechanical performance of granulated blast furnace slag based geopolymer mortar with micro-encapsulated phase change materials, Vol. 1 (2021)
Determination of the size and the number of samples to be analyzed in the laboratory for the statistical characterization of the microstructure of a clayrock, Anne-Laure Fauchille, Bram van den Eijnden, Kevin Taylor, Peter David Lee, Revue française de Géotechnique, Vol. 326, number 1, issue 165 (2021), doi:10.1051/geotech/2020024
Multiaxial fatigue experiments for elastomers based on true strain invariants, Etienne Le Mire, Erwan Verron, Bertrand Huneau, Nathan Selles, Journal of Rubber Research, Vol. 24, issue 2, pp. 227-236 (2021), doi:10.1007/s42464-021-00088-6
A mechanism-based thermo-viscoelastic constitutive law for fiber reinforced polymer matrix composites, L Di Gennaro, Federica Daghia, Marc Olive, Frédéric Jacquemin, Denis Espinassou, COMPOSITES 2021 8th ECCOMAS Thematic Conference on the Mechanical Response of Composites (2021)
Effect of Scalping on the Mechanical Behavior of Coarse Soils, Nadine Ali Hassan, Ngoc-Son Nguyen, Didier Marot, Fateh Bendahmane, International Journal of Geotechnical and Geological Engineering (2021)
Moisture effects on monitoring GFRP-balsa sandwich structure by acoustic emission, Yuan Wu, Marianne Perrin, Marie-Laetitia Pastor, Pascal Casari, Xiaojing Gong, 10th International Conference on Composites Testing and Model Identification (2021)
High-order X-FEM for the simulation of sound absorbing poro-elastic materials with coupling interfaces, Shaoqi Wu, Olivier Dazel, Gwénaël Gabard, Grégory Legrain, Journal of Sound and Vibration, Vol. 510, number 116262, issue 4 (2021), doi:10.1016/j.jsv.2021.116262
Emerging, hybrid & smart composites, Christophe Binetruy, Véronique Michaud, Functional Composite Materials, Vol. 2, issue 1 (2021), doi:10.1186/s42252-021-00028-y
Characterization of damage mechanisms of GFRP-balsa sandwich structures under 4-point bending by coupling acoustic emission and infrared thermography, Yuan Wu, Marie-Laetitia Pastor, Marianne Perrin, Pascal Casari, Xiaojing Gong, JNC 22 (2021)
The MAD4AM cluster: Toward a Multisectorial Accepted Development For Additive Manufacturing, Eric Leroy, Alain Bernard, Benoit Furet, Jean-Yves Hascoët, Alain Le-Bail, Antoine Le Duigou, Nordine Leklou, Pascal Paillard, Pierre Weiss, Assises Européennes de Fabrication Additive (2021)
Adhesion of epoxy and polyurethane adhesives in pultruded composite material, A Passos, M Arouche, R Aguiar, H Costa, Silvio DE BARROS, E Sampaio, Journal of Advanced Joining Processes, Vol. 3, number 100045, issue 1 (2021), doi:10.1016/j.jajp.2021.100045
Near interface residual stress measurement by neutron diffraction in planar AA1050/DP450 magnetic pulse welds, Thaneshan Sapanathan, Marie-Noëlle Avettand-Fènoël, Thilo Pirling, Guillaume Racineux, Aude Simar, Jean-Marie Drezet, MecaSens (2021)
Numerical Study of Low Rank Approximation Methods for Mechanics Data and Its Analysis, Lucas Lestandi, Journal of Scientific Computing, Vol. 87, number 273, issue 1 (2021), doi:10.1007/s10915-021-01421-2
Etude numérique et expérimentale d’un capteur à fibre optique basé sur la réflexion de Fresnel à l’extrémité d’une fibre multimode, Antoine Brientin, Dominique Leduc, Virgine Gaillard, Marion Girard, Cyril Lupi, Journées Nationales de l'Optique Guidée (JNOG) – Optique Dijon 2021 (2021)
Non steady-state intersonic cracks in elastomer membranes under large static strain, Thomas Corre, Michel Coret, Erwan Verron, Bruno Leblé, Journal of Theoretical, Computational and Applied Mechanics (2021), doi:10.46298/jtcam.6906
Optimization of the mechanical properties of multicrystalline nickel by restructuring the microstructural characteristics of the surface by vapour deposition, Ameni Zaouali, Pierre-Antoine Dubos, Pierre-Yves Jouan, Mireille Richard-Plouet, Valerie Brien, David Gloaguen, Baptiste Girault, Journées Annuelles SF2M 2021 (2021)
A new thermo-viscoelastic constitutive model for polymer matrix composites based on Cartan decomposition, L Di Gennaro, Federica Daghia, Marc Olive, Frédéric Jacquemin, Denis Espinassou, Journées Nationales sur les Composites (JNC 22) (2021)
Bayesian updating of a cracking model for reinforced concrete structures subjected to static and cyclic loadings, Henriette Imounga, Emilio Bastidas-Arteaga, Rostand Moutou Pitti, Ekomy Ango, Vol. 3 (2021)
In-situ monitoring of micro-tunnel geometry change based on distributed optical fiber strain sensing, Arianna Piccolo, Yann Lecieux, Dominique Leduc, Sylvie Delepine-Lesoille, Frédéric Bumbieler, Béatrice Yven, Smart Materials and Structures, Vol. 31, number 025004, issue 2 (2021), doi:10.1088/1361-665x/ac40dc
The Unusual Conductivity of Na + in PEO‐Based Statistical Copolymer Solid Electrolytes: When Less Means More, Vincent St-Onge, Sylviane Rochon, Jean‐christophe Daigle, Armand Soldera, Jerome Claverie, Angewandte Chemie International Edition, Vol. 60, issue 49, pp. 25897-25904 (2021), doi:10.1002/anie.202109709
Concentration-Gradient Prussian Blue Cathodes for Na-Ion Batteries, Pu Hu, Wenbo Peng, Bo Wang, Dongdong Xiao, Utkarsh Ahuja, Julien Réthoré, Katerina E. Aifantis, ACS Energy Letters, Vol. 5, issue 1, pp. 100-108 (2020), doi:10.1021/acsenergylett.9b02410
An open-source Abaqus implementation of the phase-field method to study the effect of plasticity on the instantaneous fracture toughness in dynamic crack propagation, Gergely Molnár, Anthony Gravouil, Rian Seghir, Julien Réthoré, Computer Methods in Applied Mechanics and Engineering, Vol. 365, number 113004, issue 582593 (2020), doi:10.1016/j.cma.2020.113004
Data-driven fracture mechanics, P. Carrara, L. De Lorenzis, L. Stainier, M. Ortiz, Computer Methods in Applied Mechanics and Engineering, Vol. 372, number 113390, issue 2 (2020), doi:10.1016/j.cma.2020.113390
Fabrication, microstructure, and properties of fired clay bricks using construction and demolition waste sludge as the main additive, Glaydson Simões dos Reis, Bogdan Grigore Cazacliu, Alexis Cothenet, Philippe Poullain, Michaela Wilhelm, Carlos Hoffmann Sampaio, Eder Claudio Lima, Weslei Ambros, Jean Michel Torrenti, Journal of Cleaner Production, Vol. 258, number 120733, issue 5 (2020), doi:10.1016/j.jclepro.2020.120733
Towards defect monitoring for metallic additive manufacturing components using phased array ultrasonic testing, A. Chabot, N. Laroche, E. Carcreff, M. Rauch, J. Y. Hascoët, Journal of Intelligent Manufacturing, Vol. 31, issue 5, pp. 1191-1201 (2020), doi:10.1007/s10845-019-01505-9
Hydromechanical modeling of granular soils considering internal erosion, Jie Yang, Zhen Yu Yin, Farid Laouafa, Pierre Yves Hicher, Canadian Geotechnical Journal, Vol. 57, issue 2, pp. 157-172 (2020), doi:10.1139/cgj-2018-0653
Concrete crack monitoring using a novel strain transfer model for distributed fiber optics sensors, Antoine Bassil, Xavier Chapeleau, Dominique Leduc, Odile Abraham, Sensors Switzerland, Vol. 20, number 2220, issue 8 (2020), doi:10.3390/s20082220
Alkali-activated grouts based on slag-fly ash mixtures: From early-age characterization to long-term phase composition, Abdelilah Aboulayt, Faten Souayfan, Emmanuel Roziere, Reda Jaafri, Anass Cherki El Idrissi, Redouane Moussa, Christophe Justino, Ahmed Loukili, Construction and Building Materials, Vol. 260, number 120510 (2020), doi:10.1016/j.conbuildmat.2020.120510
Properties of cement pastes and mortars containing recycled green glass powder, Samir Nahi, Nordine Leklou, Abdelhafid Khelidj, Mohamed N. Oudjit, Abdelfatah Zenati, Construction and Building Materials, Vol. 262, number 120875, issue 1 (2020), doi:10.1016/j.conbuildmat.2020.120875
Three-dimensional hydromechanical modeling of internal erosion in dike-on-foundation, Jie Yang, Zhen Yu Yin, Farid Laouafa, Pierre Yves Hicher, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 44, issue 8, pp. 1200-1218 (2020), doi:10.1002/nag.3057
Evolution of mechanical properties with time of fly‐ash‐based geopolymer mortars under the effect of granulated ground blast furnace slag addition, Mateusz Sitarz, Izabela Hager, Marta Choińska, Energies, Vol. 13, number 1135, issue 5 (2020), doi:10.3390/en13051135
Analysis of corrosion risk due to chloride diffusion for concrete structures in marine environment, Tristan Senga Kiesse, Stéphanie Bonnet, Ouali Amiri, Anne Ventura, Marine Structures, Vol. 73, number 102804 (2020), doi:10.1016/j.marstruc.2020.102804
A new way to analyse the size effect in quasi-brittle materials by scaling the heterogeneity size, Syed Yasir Alam, Ran Zhu, Ahmed Loukili, Engineering Fracture Mechanics, Vol. 225, number 106864, issue 2 (2020), doi:10.1016/j.engfracmech.2019.106864
Intelligent assistant system as a context-aware decision-making support for the workers of the future, Farouk Belkadi, Mohamed Anis Dhuieb, José Vicente Aguado, Florent Laroche, Alain Bernard, Francisco Chinesta, Computers and Industrial Engineering, Vol. 139, number 105732, issue 1 (2020), doi:10.1016/j.cie.2019.02.046
Estimation of the response of a deeply immersed cylinder to the shock wave generated by an underwater explosion, Kévin Brochard, Hervé Le Sourne, Guillaume Barras, Marine Structures, Vol. 72, number 102786, issue 5 (2020), doi:10.1016/j.marstruc.2020.102786
Microstructural organization of remoulded clays in relation with dilatancy/contractancy phenomena, Qian Feng Gao, Mahdia Hattab, Mohamad Jrad, Jean Marie Fleureau, Pierre Yves Hicher, Acta Geotechnica, Vol. 15, issue 1, pp. 223-243 (2020), doi:10.1007/s11440-019-00876-w
Advanced techniques for the study of shrinkage-induced cracking of concrete with recycled aggregates at early age, A. Z. Bendimerad, B. Delsaute, E. Rozière, S. Staquet, A. Loukili, Construction and Building Materials, Vol. 233, number 117340 (2020), doi:10.1016/j.conbuildmat.2019.117340
Effect of micro-macro crack interaction on softening behaviour of concrete fracture, Syed Yasir Alam, Ahmed Loukili, International Journal of Solids and Structures, Vol. 182-183, issue 12, pp. 34-45 (2020), doi:10.1016/j.ijsolstr.2019.08.003
A Cosserat Breakage Mechanics model for brittle granular media, Nicholas Anton Collins-Craft, Ioannis Stefanou, Jean Sulem, Itai Einav, Journal of the Mechanics and Physics of Solids, Vol. 141, number 103975, issue 100 (2020), doi:10.1016/j.jmps.2020.103975
Numerical analysis of the failure of recycled aggregate concrete by considering the random composition of old attached mortar, Menghuan Guo, Frédéric Grondin, Ahmed Loukili, Journal of Building Engineering, Vol. 28, number 101040, issue 10 (2020), doi:10.1016/j.jobe.2019.101040
Multi-scale modeling of the chloride diffusivity and the elasticity of Portland cement paste, Mohamad Achour, François Bignonnet, Jean François Barthélémy, Emmanuel Rozière, Ouali Amiri, Construction and Building Materials, Vol. 234, number 117124, issue 9 (2020), doi:10.1016/j.conbuildmat.2019.117124
Microstructural evolution of remolded clay related to creep, Dan Zhao, Qian Feng Gao, Mahdia Hattab, Pierre Yves Hicher, Zhen Yu Yin, Transportation Geotechnics, Vol. 24, number 100367, issue 5 (2020), doi:10.1016/j.trgeo.2020.100367
A Dynamic Bayesian Network framework for spatial deterioration modelling and reliability updating of timber structures subjected to decay, Thanh Binh Tran, Emilio Bastidas-Arteaga, Younes Aoues, Engineering Structures, Vol. 209, number 110301, issue 9 (2020), doi:10.1016/j.engstruct.2020.110301
Magnetic Pulse Welding and Spot Welding with Improved Coil Effciency-Application for DissimilarWelding of Automotive Metal Alloys, Chady Khalil, Surendar Marya, Guillaume Racineux, Journal of Manufacturing and Materials Processing, Vol. 4, number 69, issue 3 (2020), doi:10.3390/jmmp4030069
Study of Residual Stresses in Additively Manufactured Ti-6Al-4V by Neutron Diffraction Measurements, David Gloaguen, Baptiste Girault, Bruno Courant, Pierre Antoine Dubos, Marie José Moya, François Edy, Joana Rebelo Kornmeier, Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, Vol. 51, issue 2, pp. 951-961 (2020), doi:10.1007/s11661-019-05538-w
Model reduction in computational homogenization for transient heat conduction, A. Waseem, T. Heuzé, L. Stainier, M. G.D. Geers, V. G. Kouznetsova, Computational Mechanics, Vol. 65, issue 1, pp. 249-266 (2020), doi:10.1007/s00466-019-01767-3
Composite repair system for corroded metallic pipelines: an overview of recent developments and modelling, S. Budhe, M. D. Banea, S. de Barros, Journal of Marine Science and Technology Japan, Vol. 25, issue 4, pp. 1308-1323 (2020), doi:10.1007/s00773-019-00696-3
Flowability characterization and enhancement of aluminium powders for additive manufacturing, S. Touzé, M. Rauch, J. Y. Hascoët, Additive Manufacturing, Vol. 36, number 101462, issue 5 (2020), doi:10.1016/j.addma.2020.101462
Cyclic volumetric strain accumulation for sand under drained simple shear condition, Ze Xiang WU, Zhen Yu YIN, Christophe DANO, Pierre Yves HICHER, Applied Ocean Research, Vol. 101, number 102200 (2020), doi:10.1016/j.apor.2020.102200
Vulnerability and costs of adaptation strategies for housing subjected to flood risks: Application to La Guérinière France, Axel Creach, Emilio Bastidas-Arteaga, Sophie Pardo, Denis Mercier, Marine Policy, Vol. 117, number 103438 (2020), doi:10.1016/j.marpol.2019.02.010
An experimental investigation on the correlation between the aggregate size effect and the structural size effect, Ran Zhu, Syed Yasir Alam, Ahmed Loukili, Engineering Fracture Mechanics, Vol. 234, number 107101, issue 1 (2020), doi:10.1016/j.engfracmech.2020.107101
Modeling the effect of wetting on the mechanical behavior of crushable granular materials, Carlos Ovalle, Pierre Yves Hicher, Geoscience Frontiers, Vol. 11, issue 2, pp. 487-494 (2020), doi:10.1016/j.gsf.2019.06.009
Development of a micro-mechanical model for the determination of damage properties of cement pastes, Abderrahmane Rhardane, Frédéric Grondin, Syed Yasir Alam, Construction and Building Materials, Vol. 261, number 120514 (2020), doi:10.1016/j.conbuildmat.2020.120514
The Hot Optimal Transportation Meshfree (HOTM) method for materials under extreme dynamic thermomechanical conditions, Hao Wang, Huming Liao, Zongyue Fan, Jiang Fan, Laurent Stainier, Xiaobai Li, Bo Li, Computer Methods in Applied Mechanics and Engineering, Vol. 364, number 112958, issue 4849 (2020), doi:10.1016/j.cma.2020.112958
Practice of Constitutive Modelling for Saturated Soils, Zhen Yu Yin, Pierre Yves Hicher, Yin Fu Jin, ISBN:[9789811563065, 9789811563072] (2020), doi:10.1007/978-981-15-6307-2
Model of bio-colonisation on mooring lines: Updating strategy based on a static qualifying sea state for floating wind turbines, Benjamin Decurey, Franck Schoefs, Anne Laure Barillé, Thomas Soulard, Journal of Marine Science and Engineering, Vol. 8, number 108, issue 2 (2020), doi:10.3390/jmse8020108
Polynomial chaos expansion for lifetime assessment and sensitivity analysis of reinforced concrete structures subjected to chloride ingress and climate change, Emilio Bastidas-Arteaga, Charbel Pierre El Soueidy, Ouali Amiri, Phu Tho Nguyen, Structural Concrete, Vol. 21, issue 4, pp. 1396-1407 (2020), doi:10.1002/suco.201900398
Compaction Banding in High-Porosity Carbonate Rocks: 2. A Gradient-Dependent Plasticity Model, Youssouf Abdallah, Jean Sulem, Ioannis Stefanou, Journal of Geophysical Research Solid Earth, Vol. 125, number 219, issue 12 (2020), doi:10.1029/2020JB020610
Assessment of the effectiveness of wood pole repair using FRP considering the impact of climate change on decay and hurricane risk, Eric Merschman, Abdullahi M. Salman, Emilio Bastidas-Arteaga, Yue Li, Advances in Climate Change Research, Vol. 11, issue 4, pp. 332-348 (2020), doi:10.1016/j.accre.2020.10.001
Effect of process parameters on track geometry, microstructural evolution on 316L stainless steel multi-layer clads, M. Manjaiah, J. Y. Hascoët, M. Rauch, Materials Science and Engineering B, Vol. 259, number 114583 (2020), doi:10.1016/j.mseb.2020.114583
Experimental analysis of mechanical performance of glass fibre reinforced polyamide 6 under varying environmental conditions, Ivanna Pivdiablyk, Patrick Rozycki, Frédéric Jacquemin, Laurent Gornet, Stéphane Auger, Composite Structures, Vol. 245, number 112338, issue 9 (2020), doi:10.1016/j.compstruct.2020.112338
Novel green plants extract as corrosion inhibiting coating for steel embedded in concrete, Ahmed A. ElShami, Stéphanie Bonnet, Mohamed Hussein Makhlouf, A. Khelidj, N. Leklou, Pigment and Resin Technology, Vol. 49, issue 6, pp. 501-514 (2020), doi:10.1108/PRT-09-2019-0078
Applications of virtual data in subsea inspections, Michael O'Byrne, Bidisha Ghosh, Franck Schoefs, Vikram Pakrashi, Journal of Marine Science and Engineering, Vol. 8, number 328, issue 5 (2020), doi:10.3390/JMSE8050328
The use of superabsorbent polymers in high performance concrete to mitigate autogenous shrinkage in a large-scale demonstrator, Laurence De Meyst, Judy Kheir, José Roberto Tenório Filho, Kim Van Tittelboom, Nele De Belie, Sustainability Switzerland, Vol. 12, number 4741, issue 11 (2020), doi:10.3390/su12114741
Numerical crashworthiness analysis of a spar floating offshore wind turbine impacted by a ship, S. Echeverry, L. Márquez, Ph Rigo, H. Le Sourne, Developments in the Collision and Grounding of Ships and Offshore Structures Proceedings of the 8th International Conference on Collision and Grounding of Ships and Offshore Structures Iccgs 2019, pp. 85-95, ISBN:[9780367433130] (2020)
Validation of bridge health monitoring system using temperature as a proxy for damage, Eugene J. OBrien, Barbara Heitner, Aleš Žnidarič, Franck Schoefs, Guillaume Causse, Thierry Yalamas, Structural Control and Health Monitoring, Vol. 27, issue 9 (2020), doi:10.1002/stc.2588
Modelling the poroelastoplastic behaviour of soils subjected to internal erosion by suffusion, Quentin Rousseau, Giulio Sciarra, Rachel Gelet, Didier Marot, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 44, issue 1, pp. 117-136 (2020), doi:10.1002/nag.3014
On the applicability of Taylor's theory to the underwater blast response of composite plates, Y. P. Sone Oo, H. Le Sourne, O. Dorival, International Journal of Impact Engineering, Vol. 145, number 103677, issue 4 (2020), doi:10.1016/j.ijimpeng.2020.103677
Spatial identification of exposure zones of concrete structures exposed to a marine environment with respect to reinforcement corrosion, Lucas Bourreau, Laurent Gaillet, Véronique Bouteiller, Franck Schoefs, Benoît Thauvin, Julien Schneider, Samuel Naar, Structure and Infrastructure Engineering, Vol. 16, issue 2, pp. 346-354 (2020), doi:10.1080/15732479.2019.1655072
Experimental full field analysis for dynamic fracture of elastomer membranes, T. Corre, M. Coret, E. Verron, B. Leblé, F. Le Lay, International Journal of Fracture, Vol. 224, issue 1, pp. 83-100 (2020), doi:10.1007/s10704-020-00447-1
Bayesian assessment of the effects of cyclic loads on the chloride ingress process into reinforced concrete, Henriette Marlaine Imounga, Emilio Bastidas-Arteaga, Rostand Moutou Pitti, Serge Ekomy Ango, Xiao Hui Wang, Applied Sciences Switzerland, Vol. 10, number 2040, issue 6 (2020), doi:10.3390/app10062040
Consolidation and compression of deformable impregnated fibrous reinforcements: Experimental study and modeling of flow-induced deformations, A. Hautefeuille, S. Comas-Cardona, C. Binetruy, Composites Part A Applied Science and Manufacturing, Vol. 131, number 105768, issue 4 (2020), doi:10.1016/j.compositesa.2020.105768
Temperature effect on strain-induced phase transformation of cobalt, Pierre Antoine Dubos, Jamal Fajoui, Nadjib Iskounen, Michel Coret, Saurabh Kabra, Joe Kelleher, Baptiste Girault, David Gloaguen, Materials Letters, Vol. 281, number 128812, issue 6 (2020), doi:10.1016/j.matlet.2020.128812
A condition-based dynamic segmentation of large systems using a Changepoints algorithm: A corroding pipeline case, Rafael Amaya-Gómez, Emilio Bastidas-Arteaga, Franck Schoefs, Felipe Muñoz, Mauricio Sánchez-Silva, Structural Safety, Vol. 84, number 101912, issue 1 (2020), doi:10.1016/j.strusafe.2019.101912
Study on the stiffness degradation and damping of pile foundations under dynamic loadings, Zheng Li, Sandra Escoffier, Panagiotis Kotronis, Engineering Structures, Vol. 203, number 109850, issue 5 (2020), doi:10.1016/j.engstruct.2019.109850
Effectiveness of corrosion inhibitors in simulated concrete pore solution, Ahmed Elshami, Stéphanie Bonnet, Abdelhafid Khelidj, Latefa Sail, European Journal of Environmental and Civil Engineering, Vol. 24, issue 13, pp. 2130-2150 (2020), doi:10.1080/19648189.2018.1500309
Measurement and prediction of residual strains and stresses during the cooling of a glass fibre reinforced PA66 matrix composite, Mael Péron, Frédéric Jacquemin, Pascal Casari, Gilles Orange, Jérôme Bikard, Jean Luc Bailleul, Nicolas Boyard, Composites Part A Applied Science and Manufacturing, Vol. 137, number 106039 (2020), doi:10.1016/j.compositesa.2020.106039
Sensitivity analysis of the transient heat and moisture transfer in a single layer wall, Ines Othmen, Philippe Poullain, Nordine Leklou, European Journal of Environmental and Civil Engineering, Vol. 24, issue 13, pp. 2211-2229 (2020), doi:10.1080/19648189.2018.1500947
Efficient FFT-based upscaling of the permeability of porous media discretized on uniform grids with estimation of RVE size, François Bignonnet, Computer Methods in Applied Mechanics and Engineering, Vol. 369, number 113237, issue 5 (2020), doi:10.1016/j.cma.2020.113237
Hygroscopic stresses in asymmetric biocomposite laminates submitted to various relative humidity conditions, Mael Péron, Amandine Célino, Frédéric Jacquemin, Antoine Le Duigou, Composites Part A Applied Science and Manufacturing, Vol. 134, number 105896 (2020), doi:10.1016/j.compositesa.2020.105896
Process selection charts based on economy and environment: subtractive or additive manufacturing to produce structural components of aircraft, C. Hodonou, O. Kerbrat, M. Balazinski, M. Brochu, International Journal on Interactive Design and Manufacturing, Vol. 14, issue 3, pp. 861-873 (2020), doi:10.1007/s12008-020-00663-y
Size effect on the contribution of the aggregate interlock mechanism in reinforced concrete beams without shear reinforcement, Ahmed Belbachir, Syed Yasir Alam, Mohammed Matallah, Ahmed Loukili, European Journal of Environmental and Civil Engineering, Vol. 24, issue 9, pp. 1363-1380 (2020), doi:10.1080/19648189.2018.1471007
Long-Term Stochastic Modeling of Sheet Pile Corrosion in Coastal Environment from On-Site Measurements, Franck Schoefs, Jérôme Boéro, Bruno Capra, Journal of Marine Science and Engineering, Vol. 8, number 70, issue 2 (2020), doi:10.3390/jmse8020070
Optimization of Condition-Based Maintenance of Wood Utility Pole Network Subjected to Hurricane Hazard and Climate Change, Abdullahi M. Salman, Babak Salarieh, Emilio Bastidas-Arteaga, Yue Li, Frontiers in Built Environment, Vol. 6, number 40 (2020), doi:10.3389/fbuil.2020.00073
DEF damage in heat cured mortars made of recycled concrete sand aggregate, Alexandre Yammine, Nordine Leklou, Marta Choinska, François Bignonnet, Jean Michel Mechling, Construction and Building Materials, Vol. 252, number 119059, issue 1 (2020), doi:10.1016/j.conbuildmat.2020.119059
Numerical modeling of interply adhesion in composite forming of viscous discontinuous thermoplastic prepregs, Paris Dilip Mulye, Julie Hemmer, Lionel Morancay, Christophe Binetruy, Adrien Leygue, Sebastien Comas-Cardona, Pierre Pichon, Damien Guillon, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Composites Part B: Engineering, Procedia Manufacturing, Composites Part B Engineering, Vol. 191, number 107953, issue 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1, 1, , 1 (2020), doi:10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953, 10.1016/j.compositesb.2020.107953, 10.1016/j.promfg.2020.04.135, 10.1016/j.compositesb.2020.107953
Detection and measurement of matrix discontinuities in uhpfrc by means of distributed fiber optics sensing, Bartłomiej Sawicki, Antoine Bassil, Eugen Brühwiler, Xavier Chapeleau, Dominique Leduc, Sensors Switzerland, Vol. 20, number 3883, issue 14, pp. 1-21 (2020), doi:10.3390/s20143883
Enriched continuum for multi-scale transient diffusion coupled to mechanics, Abdullah Waseem, Thomas Heuzé, Laurent Stainier, Marc G.D. Geers, Varvara G. Kouznetsova, Advanced Modeling and Simulation in Engineering Sciences, Vol. 7, number 2823, issue 1 (2020), doi:10.1186/s40323-020-00149-2
A two-scale probabilistic time-dependent fatigue model for offshore steel wind turbines, Benjamin Rocher, Franck Schoefs, Marc François, Arnaud Salou, Anne Laure Caouissin, International Journal of Fatigue, Vol. 136, number 105620, issue 5 (2020), doi:10.1016/j.ijfatigue.2020.105620
Experimental study and modelling of the phase transformation of Zircaloy-4 alloy under high thermal transients, T. Jailin, N. Tardif, J. Desquines, M. Coret, M. C. Baietto, V. Georgenthum, Materials Characterization, Vol. 162, number 110199, issue 1 (2020), doi:10.1016/j.matchar.2020.110199
Magnetic pulse welding of metallic tubes–experimental investigation and numerical modelling, Rishabh Shotri, Guillaume Racineux, Amitava De, Science and Technology of Welding and Joining, Vol. 25, issue 4, pp. 273-281 (2020), doi:10.1080/13621718.2019.1685066
Electromagnetic flanging: from elementary geometries to aeronautical components, Cheikh Tidiane Sow, Grégoire Bazin, Thomas Heuzé, Guillaume Racineux, International Journal of Material Forming, Vol. 13, issue 3, pp. 423-443 (2020), doi:10.1007/s12289-020-01547-y
Reliability of inflatable structures: challenge and first results, Jean Christophe Thomas, Franck Schoefs, Colin Caprani, Benjamin Rocher, European Journal of Environmental and Civil Engineering, Vol. 24, issue 10, pp. 1533-1557 (2020), doi:10.1080/19648189.2018.1474807
Multidirectional flow apparatus for assessing soil internal erosion susceptibility, Didier Marot, Dinh Minh Tran, Fateh Bendahmane, Van Thao Le, Geotechnical Testing Journal, Vol. 43, issue 6 (2020), doi:10.1520/GTJ20190254
Measurement of the local water content of an epoxy adhesive by fiber optic sensor based on Fresnel reflection, Romain Grangeat, Marion Girard, Cyril Lupi, Dominique Leduc, Frédéric Jacquemin, Mechanical Systems and Signal Processing, Vol. 141, number 106439, issue August (2020), doi:10.1016/j.ymssp.2019.106439
Further development of a laboratory procedure to assess the mechanical performance of cob, Théo Vinceslas, Erwan Hamard, Andry Razakamanantsoa, Fateh Bendahmane, Environmental Geotechnics, Vol. 7, issue 3, pp. 200-207 (2020), doi:10.1680/jenge.17.00056
An efficient finite element based multigrid method for simulations of the mechanical behavior of heterogeneous materials using CT images, Xiaodong Liu, Julien Réthoré, Marie Christine Baietto, Philippe Sainsot, Antonius Adrianus Lubrecht, Computational Mechanics, Vol. 66, issue 6, pp. 1427-1441 (2020), doi:10.1007/s00466-020-01909-y
Analysis of Failure Pressure of Defective Pipes Repaired with Composite Systems Considering the Plastic Deformation of Pipe, S. Budhe, M. D. Banea, S. de Barros, Journal of the Institution of Engineers India Series C, Vol. 101, issue 6, pp. 929-936 (2020), doi:10.1007/s40032-020-00612-4
Structure-properties relationships of moisturized sandwich composite materials under extreme temperature conditions (fire resistance), Vincent Legrand, Luan TranVan, Pascal Casari, Frédéric Jacquemin, Composite Structures, Vol. 235, number 111774, issue 38 (2020), doi:10.1016/j.compstruct.2019.111774
Prediction of the burst pressure for defective pipelines using different semi-empirical models, S. Budhe, M. D. Banea, S. de Barros, Frattura Ed Integrita Strutturale, Vol. 14, issue 52, pp. 137-147 (2020), doi:10.3221/IGF-ESIS.52.12
Mechanical properties of optical fiber strain sensing cables under γ-ray irradiation and large strain influence, Arianna Piccolo, Sylvie Delepine-Lesoille, Etienne Friedrich, Shasime Aziri, Yann Lecieux, Dominique Leduc, Sensors Switzerland, Vol. 20, number 696, issue 3 (2020), doi:10.3390/s20030696
Sources of uncertainties for total chloride profile measurements in concrete: quantization and impact on probability assessment of corrosion initiation, Stéphanie Bonnet, Franck Schoefs, Manuela Salta, European Journal of Environmental and Civil Engineering, Vol. 24, issue 2, pp. 232-247 (2020), doi:10.1080/19648189.2017.1375997
Combination Effect of Limestone Filler and Slag on Delayed Ettringite Formation in Heat-Cured Mortar, Walid Deboucha, Nordine Leklou, Abdelhafid Khelidj, Olivier Plé, U. Johnson Alengaram, Journal of Materials in Civil Engineering, Vol. 32, number 20.1, issue 3 (2020), doi:10.1061/(ASCE)MT.1943-5533.0003020
The Discontinuous Galerkin Material Point Method for variational hyperelastic–plastic solids, Adrien Renaud, Thomas Heuzé, Laurent Stainier, Computer Methods in Applied Mechanics and Engineering, Vol. 365, number 112987, issue 1 (2020), doi:10.1016/j.cma.2020.112987
Decision-based territorial life cycle assessment for the management of cement concrete demolition waste, Marjan Mousavi, Anne Ventura, Nicolas Antheaume, Waste Management and Research, Vol. 38, issue 12, pp. 1405-1419 (2020), doi:10.1177/0734242X20965676
A parametric study on the dynamic ultimate strength of a stiffened panel subjected to wave- and whipping-induced stresses, George Jagite, Fabien Bigot, Quentin Derbanne, Šime Malenica, Hervé Le Sourne, Patrice Cartraud, Ships and Offshore Structures, issue 9, pp. 1-15 (2020), doi:10.1080/17445302.2020.1790985
Exfoliation Corrosion Impact on Microstructure, Mechanical Properties, and Fatigue Crack Growth of Aeronautical Aluminum Alloy, Abdessamad Brahami, Jamel Fajoui, Benattou Bouchouicha, Journal of Failure Analysis and Prevention, Vol. 20, issue 1, pp. 197-207 (2020), doi:10.1007/s11668-020-00815-y
Thermo-mechanical behavior of Zircaloy-4 claddings under simulated post-DNB conditions, T. Jailin, N. Tardif, J. Desquines, P. Chaudet, M. Coret, M. C. Baietto, V. Georgenthum, Journal of Nuclear Materials, Vol. 531, number 151984, issue 2 (2020), doi:10.1016/j.jnucmat.2020.151984
Microscopically informed upscale approach of modelling damage in mortar by considering matrix-to-grain interface and grain micro-fracture characteristics, Abderrahmane Rhardane, Syed Yasir Alam, Frédéric Grondin, Theoretical and Applied Fracture Mechanics, Vol. 109, number 102725, issue 2 (2020), doi:10.1016/j.tafmec.2020.102725
Influence of the lateral confinement on the transverse mechanical behavior of tows and quasi-unidirectional fabrics: Experimental and modeling investigations of dry through-thickness compaction, Julie Hemmer, Anne Sophie Lectez, Erwan Verron, Jean Michel Lebrun, Christophe Binetruy, Sébastien Comas-Cardona, Journal of Composite Materials, Vol. 54, issue 23, pp. 3261-3274 (2020), doi:10.1177/0021998320912809
Effect of compaction on multi-physical properties of hemp-black liquor composites, Marie Viel, Florence Collet, Christophe Lanos, Journal of Materials Research and Technology, Vol. 9, issue 2, pp. 2487-2494 (2020), doi:10.1016/j.jmrt.2019.12.079
Self-healing potential and phase evolution characterization of ternary cement blends, Mojtaba Mohammadi, Carol Youssef-Namnoum, Maxime Robira, Benoit Hilloulin, Materials, Vol. 13, number 2543, issue 11 (2020), doi:10.3390/ma13112543
A persistent modal plastic model for instabilities in Al-Mg alloys with 1D application, Baptiste Reyne, Nicolas Moes, Pierre Yves Manach, International Journal of Plasticity, Vol. 131, number 102713, issue 16 (2020), doi:10.1016/j.ijplas.2020.102713
Effects of heat treatment on the behavior of teak wood adherends bonded joints, S. Budhe, M. D. Banea, S. Ghugal, S. de Barros, Applied Adhesion Science, Vol. 8, number 263, issue 1 (2020), doi:10.1186/s40563-020-00124-5
A stable extended/generalized finite element method with Lagrange multipliers and explicit damage update for distributed cracking in cohesive materials, Zoltan Csati, Nicolas Moës, Thierry J. Massart, Computer Methods in Applied Mechanics and Engineering, Vol. 369, number 113173, issue B7 (2020), doi:10.1016/j.cma.2020.113173
Hygro-thermo-mechanical responses of balsa wood core sandwich composite beam exposed to fire, Luan Tran Van, Vincent Legrand, Pascal Casari, Revathy Sankaran, Pau Loke Show, Aydin Berenjian, Chyi How Lay, Processes, Vol. 8, number 103, issue 1 (2020), doi:10.3390/pr8010103
Multifidelity adaptive kriging metamodel based on discretization error bounds, L. Mell, V. Rey, F. Schoefs, International Journal for Numerical Methods in Engineering, Vol. 121, issue 20, pp. 4566-4583 (2020), doi:10.1002/nme.6451
The Eshelby problem of the confocal N-layer spheroid with imperfect interfaces and the notion of equivalent particle in thermal conduction, J. F. Barthélémy, F. Bignonnet, International Journal of Engineering Science, Vol. 150, number 103274, issue 23 (2020), doi:10.1016/j.ijengsci.2020.103274
Stability properties of the Discontinuous Galerkin Material Point Method for hyperbolic problems in one and two space dimensions, Adrien Renaud, Thomas Heuzé, Laurent Stainier, International Journal for Numerical Methods in Engineering, Vol. 121, issue 4, pp. 664-689 (2020), doi:10.1002/nme.6239
Forced vibrations and wave propagation in multilayered solid spheres using a one-dimensional semi-analytical finite element method, Matthieu Gallezot, Fabien Treyssède, Odile Abraham, Wave Motion, Vol. 96, number 102555, issue 1 (2020), doi:10.1016/j.wavemoti.2020.102555
Multi-partner benchmark experiment of fatigue crack growth measurements, Raphaël Langlois, Raphaël Cusset, Jérôme Hosdez, Vincent Bonnand, Benoit Blaysat, Léa Menut-Tournadre, Jan Neggers, Michel Coret, Joseph Henry, Véronique Doquet, Michel Grédiac, Vincent Chiaruttini, Martin Poncelet, Henry Proudhon, Nathalie Limodin, Julien Réthoré, Engineering Fracture Mechanics, Vol. 235, number 107157, issue 11 (2020), doi:10.1016/j.engfracmech.2020.107157
A variational framework for the modeling of glassy polymers under finite strains, Jan Michel C. Farias, Laurent Stainier, Eduardo Alberto Fancello, Continuum Mechanics and Thermodynamics, Vol. 32, issue 4, pp. 1037-1055 (2020), doi:10.1007/s00161-019-00809-8
Assessment of uncertainty propagation using first-order Markov chain for maintenance of pavement degradation, Amjad Issa, Franck Schoefs, International Journal of Pavement Engineering, Vol. 21, issue 14, pp. 1841-1852 (2020), doi:10.1080/10298436.2019.1568430
Numerical modeling of the hygro-mechanical behavior of the 3D composite materials, Mamadou Abdoul Mbacké, Shahram Khazaie, Sylvain Fréour, Frédéric Jacquemin, Journal of Composite Materials, Vol. 54, issue 28, pp. 4457-4471 (2020), doi:10.1177/0021998320932270
Analysis of the delayed damage model for three one-dimensional loading scenarii, Jihed Zghal, Nicolas Moë, Comptes Rendus Physique, Vol. 21, issue 6, pp. 527-537 (2020), doi:10.5802/CRPHYS.42
How to efficiently apply soft thin coating to existing Finite Element contact model, T. Tiirats, N. Chevaugeon, N. Moës, C. Stolz, N. Marouf, E. Desdoit, Finite Elements in Analysis and Design, Vol. 177, number 103420, issue 1 (2020), doi:10.1016/j.finel.2020.103420
Real time imaging of strain fields induced by the ferrite-to-austenite transformation in high purity iron, Nicolas Bruzy, Michel Coret, Bertrand Huneau, Laurent Stainier, Christophe Denoual, Marilyne Mondon, Guillaume Kermouche, Materials Today Communications, Vol. 24, number 101028 (2020), doi:10.1016/j.mtcomm.2020.101028
A simple characterization methodology for the identification of the visco-elastic behavior of thermoset adhesives during cure, Marion Girard, Mael Péron, Alexandre Uguen, Pascal Casari, Frédéric Jacquemin, Applied Adhesion Science, Vol. 8, number 5481, issue 1 (2020), doi:10.1186/s40563-020-00125-4
Improvement of the digital image correlation close to the borders of an object, M. Baconnais, J. Réthoré, M. François, Strain, Vol. 56, number 739, issue 3 (2020), doi:10.1111/str.12340
Laser polishing of additive laser manufacturing surfaces: Methodology for parameter setting determination, Benoit Rosa, Jean Yves Hascoët, Pascal Mognol, International Journal of Manufacturing Research, Vol. 15, number 181, issue 2, pp. 136-147 (2020), doi:10.1504/IJMR.2020.106853
On loading paths followed inside plastic simple waves in two-dimensional elastic-plastic solids, Adrien Renaud, Thomas Heuzé, Laurent Stainier, Journal of the Mechanics and Physics of Solids, Vol. 143, number 104064, issue 1 (2020), doi:10.1016/j.jmps.2020.104064
A Cost-Benefit Methodology for Selecting Analytical Reinforced Concrete Corrosion Onset Models, N. Rakotovao Ravahatra, T. De Larrard, F. Duprat, E. Bastidas-Arteaga, F. Schoefs, Advances in Civil Engineering, Vol. 2020, issue 88 (2020), doi:10.1155/2020/3286721
The development of accelerated test method for internal sulfate attack by delayed ettringite formation, Van Huong Nguyen, Nordine Leklou, Pierre Mounanga, Materials Science Forum, Vol. 987 MSF, pp. 27-32, ISBN:[9783035714647] (2020)
On the definition of a relevant meso-scale for upscaling the mechanical behavior of 3D granular materials, Ngoc Son Nguyen, Hélène Magoariec, Eric Vincens, Bernard Cambou, Granular Matter, Vol. 22, number 1525, issue 1 (2020), doi:10.1007/s10035-019-0972-9
Shear localization as a mesoscopic stress-relaxation mechanism in fused silica glass at high strain rates, W. Schill, J. P. Mendez, L. Stainier, M. Ortiz, Journal of the Mechanics and Physics of Solids, Vol. 140, number 103940, issue 5 (2020), doi:10.1016/j.jmps.2020.103940
Remapping-free variational h-adaption for strongly coupled thermo-mechanical problems, Rohit Pethe, Thomas Heuzé, Laurent Stainier, Finite Elements in Analysis and Design, Vol. 176, number 103435, issue 1 (2020), doi:10.1016/j.finel.2020.103435
Instrumentation of Stratospheric Balloon Straps with Optical Fibre for Temperature and Strain Monitoring, Yann Lecieux, Cyril Lupi, Dominique Leduc, Quentin Macé, Valentin Jeanneau, Pascale Guigue, Sensors Basel Switzerland, Vol. 20, number 1433, issue 5 (2020), doi:10.3390/s20051433
Practice on creating a common reference concrete for Round Robin Testing programmes based on the experience from COST Action TU1404, Marijana Serdar, Stéphanie Staquet, Dirk Schlicke, Emmanuel Rozière, Miguel Azenha, Sree Nanukuttan, Ivan Gabrijel, Özlem Cizer, Violeta Bokan Bosiljkov, Aljoša Šajna, Construction and Building Materials, Vol. 247, number 118542 (2020), doi:10.1016/j.conbuildmat.2020.118542
An enriched finite volume formulation for the simulation of ductile material failure under shock loading, Marie Gorecki, Guillaume Peillex, Laurianne Pillon, Nicolas Moës, Computational Mechanics, Vol. 65, issue 5, pp. 1267-1288 (2020), doi:10.1007/s00466-020-01818-0
On the use of Cox regression for statistical analysis of fatigue life results, K. Narynbek Ulu, B. Huneau, E. Verron, A. S. Béranger, P. Heuillet, Journal of Testing and Evaluation, Vol. 48, number 20180541, issue 2 (2020), doi:10.1520/JTE20180541
Stability of the stationary solutions of the Allen–Cahn equation with non-constant stiffness, Paolo Buttà, Emilio N.M. Cirillo, Giulio Sciarra, Wave Motion, Vol. 98, number 102641 (2020), doi:10.1016/j.wavemoti.2020.102641
Coupled NIRT/3D-DIC for a FEMU Identification of the Thermo-Mechanical Behavior of Zr-4 Claddings Under Simulated Reactivity Initiated Accident, T. Jailin, N. Tardif, J. Desquines, M. Coret, M. C. Baietto, T. Breville, P. Chaudet, V. Georgenthum, Conference Proceedings of the Society for Experimental Mechanics Series, pp. 41-47, ISBN:[9783030300975] (2020), doi:10.1007/978-3-030-30098-2_7
Hydration and Durability of Ternary Binders Based on Metakaolin and Limestone Filler, Emmanuel Roziere, Gildas Medjigbodo, Laurent Izoret, Ahmed Loukili, Calcined Clays for Sustainable Concrete, Vol. 25, pp. 673-681 (2020), doi:10.1007/978-981-15-2806-4_75
Towards the prediction of sandwich composites durability in severe condition of temperature: A new numerical model describing the influence of material water content during a fire scenario, Juan Pablo Márquez Costa, Vincent Legrand, Sylvain Fréour, Frédéric Jacquemin, Materials, Vol. 13, number 5420, issue 23, pp. 1-37 (2020), doi:10.3390/ma13235420
Dynamic ultimate strength of a container ship under sagging condition, George Jagite, Hervé Le Sourne, Patrice Cartraud, Fabien Bigot, Quentin Derbanne, Šime Malenica, Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering OMAE, Vol. 2B-2020, ISBN:[9780791884331] (2020), doi:10.1115/OMAE2020-18198
A generic method to realize long fibers filled and large polymer parts in additive manufacturing, Jean Yves Hascoët, Olivier Authelin, Matthieu Rauch, Journal of Machine Engineering, Vol. 20, pp. 107-116 (2020), doi:10.36897/jme/118217
A first step towards the numerical simulation of the forming of flat TFP preforms, Jessy Simon, Nahiene Hamila, Christophe Binétruy, Sébastien Comas-Cardona, Procedia Manufacturing, Procedia Manufacturing, Vol. 47, pp. 126-128 (2020), doi:10.1016/j.promfg.2020.04.151
Progressive damage in quasi-brittle solids, Nunziante Valoroso, Claude Stolz, Proceedings of XXIV AIMETA Conference 2019, pp. 408-418, ISBN:[9783030410568] (2020), doi:10.1007/978-3-030-41057-5_34
Influence of local cubic anisotropy on the transition towards an equipartition regime in a 3D texture-less random elastic medium, Shahram Khazaie, Régis Cottereau, Wave Motion, Vol. 96, number 102574, issue 1 (2020), doi:10.1016/j.wavemoti.2020.102574
Numerical crashworthiness analysis of a spar floating offshore wind turbine impacted by a ship, S. Echeverry, L. Márquez, Ph Rigo, H. Le Sourne, Vol. 2020, pp. 85-95 (2020), doi:10.1201/9781003002420-11
Multiscale homogenization of a glass-PA66 fabric composite behavior for crash studies, P. Rozycki, M. A. Mbacke, A. T. Dau, Eccm 2018 18th European Conference on Composite Materials, ISBN:[9781510896932] (2020)
A new approach to compute the non-linear whipping response using hydro-elastoplastic coupling, George Jagite, Hervé le Sourne, Patrice Cartraud, Šime Malenica, Fabien Bigot, Jérôme de Lauzon, Quentin Derbanne, Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering OMAE, Vol. 2A-2020, ISBN:[9780791884324] (2020)
Towards a method for the identification of water diffusion parameters in polymers and composites, Julie Cocaud, Amandine Célino, Sylvain Fréour, Frédéric Jacquemin, Eccm 2018 18th European Conference on Composite Materials, ISBN:[9781510896932] (2020)
Variational h-adaption for coupled thermomechanical problems, Rohit Pethe, Thomas Heuzé, Laurent Stainier, Engineering Computations Swansea Wales, Vol. 37, issue 4, pp. 1261-1290 (2020), doi:10.1108/EC-05-2019-0243
Consideration of climate change-induced corrosion by structural codes, Maria Nogal, Emilio Bastidas-Arteaga, Helena Maria Dos Santos Gervásio, IABSE Congress Christchurch 2020 Resilient Technologies for Sustainable Infrastructure Proceedings, pp. 1064-1070, ISBN:[9783857481703] (2020)
Investigation of the effect of γ irradiations on the mechanical and physico-chemical properties of cementitious materials: from the nanoscale to mortars’scale, Maxime Robira, Benoît Hilloulin, Ahmed Loukili, Gildas Potin, Xavier Bourbon, Abdessalam Abdelouas, CIGOS 2019, Innovation for Sustainable Infrastructure, Vol. 54, pp. 639-644 (2020), doi:10.1007/978-981-15-0802-8_101
Non-linear constitutive law for a glass-PA66 fabric composite dedicated to numerical simulations in crash studies, Mamadou A. Mbacke, Patrick Rozycki, Eccm 2018 18th European Conference on Composite Materials, ISBN:[9781510896932] (2020)
A goal-oriented model reduction technique for parametric fluid-structure problems, Cedric Leblond, Mathilde Chevreuil, Cyrille Allery, Claudine Beghein, Proceedings of the 6th European Conference on Computational Mechanics Solids Structures and Coupled Problems Eccm 2018 and 7th European Conference on Computational Fluid Dynamics Ecfd 2018, pp. 358-369, ISBN:[9788494731167] (2020)
Carbon/polyamide 6 thermoplastic composites for underwater applications, Mael Arhant, Pierre Yves Le Gac, Maelenn Le Gall, Christophe Briançon, Christian Burtin, Peter Davies, Eccm 2018 18th European Conference on Composite Materials, ISBN:[9781510896932] (2020)
Simplified modelling of surface ship whipping response to underwater explosion, R. Trivedi, H. Le Sourne, S. Paroissien, S. Branchereau, C. Lucas, Developments in the Collision and Grounding of Ships and Offshore Structures Proceedings of the 8th International Conference on Collision and Grounding of Ships and Offshore Structures Iccgs 2019, pp. 120-127, ISBN:[9780367433130] (2020)
Behavior of composite material instrumented by optical fiber, R. El Abdi, V. Chean, H. Ramezani, P. Casari, F. Jacquemin, Proceedings of the International Conference of Mechatronics and Cyber- MixMechatronics - 2020, International Journal of Mechatronics and Applied Mechanics, Vol. 143, pp. 26-33 (2020), doi:10.1007/978-3-030-53973-3_4
Mechanical characterization of fiber reinforced floor screeds: Influence of glass fibers on shrinkage and cracking mechanisms, Fella Chelha, Syed Yasir Alam, Ahmed Zakarya Bendimerad, Ahmed Loukili, American Concrete Institute ACI Special Publication, Vol. SP-343, pp. 70-79, ISBN:[9782883941427] (2020), doi:10.35789/fib.BULL.0095.Ch08
Influence of thermal preconditioning on the mechanism of external sulphate attack, S. Boudache, E. Rozière, A. Loukili, H. Colina, External Sulphate Attack Field Aspects and Lab Tests, Vol. 21, pp. 71-80 (2020), doi:10.1007/978-3-030-20331-3_6
Methodology for consideration of ageing in the design of tidal turbine blades, S. Paboeuf, S. Durand, A. Favry, E. Billaudeau, P. Casari, L. Mouton, Eccm 2018 18th European Conference on Composite Materials, ISBN:[9781510896932] (2020)
A general method for optimal pressure sensor placement to detect race-trackings and predict their criticality in the resin transfer molding process, Christophe Binetruy, Nihad Siddig, Elena Syerko, Pavel Simacek, Suresh Advani, Eccm 2018 18th European Conference on Composite Materials, ISBN:[9781510896932] (2020)
Calcined Clay—Limestone Cements: Hydration and Mechanical Properties of Ternary Blends, Guillemette Cardinaud, Emmanuel Rozière, Ahmed Loukili, Olivier Martinage, Laury Barnes-Davin, Calcined Clays for Sustainable Concrete, Vol. 25, pp. 683-689 (2020), doi:10.1007/978-981-15-2806-4_76
Statistical characterization of shale microstructure: Determination of representative elementary area, Ph Cosenza, D. Prêt, S. Hédan, A. L. Fauchille, Rock Mechanics for Natural Resources and Infrastructure Development Proceedings of the 14th International Congress on Rock Mechanics and Rock Engineering ISRM 2019, pp. 1583-1590, ISBN:[9780367422844] (2020)
Behavior of composite material instrumented by optical fiber, R. El Abdi, V. Chean, H. Ramezani, P. Casari, F. Jacquemin, International Journal of Mechatronics and Applied Mechanics, Vol. 1, issue 7, pp. 65-69 (2020), doi:10.17683/ijomam/issue7.10
Simplified modelling of surface ship whipping response to underwater explosion, R. Trivedi, H. Le Sourne, S. Paroissien, S. Branchereau, C. Lucas, Vol. 2020, pp. 120-127 (2020), doi:10.1201/9781003002420-15
Experimental investigation of intra-tow fluid storage mechanisms in dual-scale reinforcements, Mathieu Imbert, Sebastien Comas-Cardona, Emmanuelle Abisset-Chavanne, David Prono, Eccm 2018 18th European Conference on Composite Materials, ISBN:[9781510896932] (2020)
Viscoelastic behaviour investigation and new developed laboratory slamming test on foam core sandwich, Fahmi Alila, Jamal Fajoui, Raphael Gerard, Pascal Casari, Mohamed Kchaou, Frederic Jacquemin, Journal of Sandwich Structures and Materials, Vol. 22, issue 6, pp. 2049-2074 (2020), doi:10.1177/1099636218792729
Seismic precursor to instability induced by internal erosion in loose granular slopes, Wei Hu, Pierre Yves Hicher, Gianvito Scaringi, Qiang Xu, Theo W.J. Van Asch, Gonghui Wang, Wei Chao Li, Gang Deng, Xiang Qian Liang, Geotechnique, Vol. 70, issue 7, pp. 636-638 (2020), doi:10.1680/jgeot.18.D.002
Acoustic emission monitoring and quantitative evaluation of damage in concrete beams under creep, J. Saliba, A. Loukili, F. Grondinn, ISBN:[9780128221365] (2020), doi:10.1016/B978-0-12-822136-5.00006-X
Physico-Chemical Characterization at Early-Age of 3D Printed Mortar, Ilhame Harbouz, Emmanuel Roziere, Ammar Yahia, Ahmed Loukili, Second RILEM International Conference on Concrete and Digital Fabrication, Vol. 28, pp. 272-279 (2020), doi:10.1007/978-3-030-49916-7_28
Characterization and prediction of microcracking in reinforced UHPFRC beams under bending, Vicky Turgeon-Mallette, Luca Sorelli, David Conciatori, Julien Réthoré, American Concrete Institute ACI Special Publication, Vol. SP-343, pp. 391-400, ISBN:[9782883941427] (2020), doi:10.35789/fib.BULL.0095.Ch40
Using the unit influence line of a bridge to track changes in its condition, Barbara Heitner, Franck Schoefs, Eugene J. OBrien, Aleš Žnidarič, Thierry Yalamas, Journal of Civil Structural Health Monitoring, Vol. 10, issue 4, pp. 667-678 (2020), doi:10.1007/s13349-020-00410-7
Magnitude of latent heat in thermally loaded clays, Sergio Samat, Laurent Brochard, Ioannis Stefanou, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 44, issue 14, pp. 1926-1957 (2020), doi:10.1002/nag.3114
Biocompatibility and osseointegration of nanostructured titanium dental implants in minipigs, Alain Hoornaert, Luciano Vidal, Romain Besnier, Jean Francois Morlock, Guy Louarn, Pierre Layrolle, Clinical Oral Implants Research, Vol. 31, issue 6, pp. 526-535 (2020), doi:10.1111/clr.13589
Residual stresses in thermoplastic composites during laser assisted tape deposition, Anna El Bayssari, Frédéric Jacquemin, Mael Péron, Anaïs Barasinski, Federica Daghia, Damien Guillon, FabAddComp - Fabrication additive des composites (2020)
L’effet de l’écrouissage rotationnel sur le comportement des sols argileux, Sanae Ahayan, Zhenyu Yin, Panagiotis Kotronis, Frédéric Collin, Academic Journal of Civil Engineering (2020), doi:10.26168/ajce.34.1.56
A comparative study on the effect of different activating solutions and formulations on the early stage geopolymerization process, Lais Alves, Nordine Leklou, Silvio DE BARROS, MATEC Web of Conferences, MATBUD’2020 – Scientific-Technical Conference: E-mobility, Sustainable Materials and Technologies, Vol. 322, pp. 01039 (2020), doi:10.1051/matecconf/202032201039
A phenomenological expression of strain energy in large elastic deformations of isotropic materials, Bale Baidi Blaise, Liman Kaoye Madahan Bien-Aimé, Gambo Betchewe, Gilles Marckmann, Tibi Beda, Iranian Polymer Journal, Vol. 29, issue 6, pp. 525-533 (2020), doi:10.1007/s13726-020-00816-6
Investigation of the sources of residual stresses on the assessment of the initial state of a thermoplastic matrix composite tube, L. Di Gennaro, Federica Daghia, Christophe Cluzel, Frédéric Jacquemin, Aurélien Miller, 19th European Conference on Composite Materials (ECCM19 ) (2020)
Place des méthodes numériques dans l’enseignement de la géotechnique, Philippe Mestat, Yvon Riou, pp. 349-360, CRC Press (2020), doi:10.1201/9781003078623-62
Forward models based on a modal approach for fast topological imaging of open elastic waveguides, Matthieu Gallezot, Séminaire du laboratoire POEMS (2020)
Efficient estimation of the failure probability of a monopile foundation using a Kriging-based approach with multi-point enrichment, Abdul-Kader El Haj, Abdul‐hamid Soubra, Computers and Geotechnics, Vol. 121, number 103451 (2020), doi:10.1016/j.compgeo.2020.103451
Thermal effects on the mechanical behavior of Paris green clay–concrete interface, Kexin Yin, Roxana Vasilescu, Anne-Laure Fauchille, Panagiotis Kotronis, E3S Web of Conferences, Vol. 205, number 13006, issue 4 (2020), doi:10.1051/e3sconf/202020513006
Évaluation des risques et adaptation climatique d’ouvrages en génie civil et bâtiments examine l’effet des changements climatiques sur le sol, le bâti et les infrastructures/ Projet RI-ADAPTCLIM. Sous la direction de P. Kotronis (plusieurs auteurs)., Panagiotis Kotronis, ISTE éditions (2020)
Climate change for coastal areas: Risks, adaptation and acceptability, Emilio Bastidas-Arteaga, Axel Creach, Advances in Climate Change Research (2020), doi:10.1016/j.accre.2020.11.012
Solutions de simulation numérique de l'impression 3d de matériaux expansifs pour la réalisation de pièces de très grandes dimensions, Elodie Paquet, Benoit Furet, Sébastien Garnier, Sébastien Le Loch, Alain Bernard, NAFEMS FRANCE 2020 (2020)
Three-dimensional hydro-mechanical modelling of suffusion in gap-graded granular soils for engineering practice, Jie Yang, Zhen-Yu Yin, Farid Laouafa, Pierre-Yves Hicher, Workshop “Innovative numerical methods for internal erosion processes“ (2020)
Electromagnetic Processing for Elaboration of Dissimilar Joints. Case Studies with Aluminum, Surendar Marya, Guillaume Racineux, Modern Concepts in Material Science, Vol. 3, issue 3 (2020), doi:10.33552/MCMS.2020.03.000564
Neutron and X-ray diffraction measurements to explore the influence of thermal, mechanical and thermomechanical loadings on the FCC retained phase of two phase HCP/FCC cobalt, Pierre-Antoine Dubos, Jamal Fajoui, Nadjib Iskounen, Michel Coret, Saurabh Kabra, Baptiste Girault, David Gloaguen, International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (2020)
Simulation of simultaneous squeeze-bleeding flow for the consolidation of unidirectional viscous prepregs, Paris Dilip Mulye, Grégoire Sorba, Alexandre Hautefeuille, Christophe Binetruy, Adrien Leygue, Sébastien Comas-Cardona, Elena Syerko, Suresh Advani, 19th European Conference on Composite Materials (ECCM-19), Nantes, France (2020)
Experimental and numerical study of the composite wing structure embedding solar cells, Quentin Rouxel, Pierre-Antoine Dubos, Shahram Khazaie, Simon Lucas, Pascal Casari, Aerospace Europe Conference 2020 (2020)
A polynomial expansion based model for evaluating wear of thin surface coatings in fea, Tauno Tiirats, Nicolas Chevaugeon, Nicolas Moes, Claude Stolz, Nabil Marouf, 14th World Congress on Computational Mechanics (WCCM) (2020)
Mechanical behaviour and permeability of geopolymer mortars, Mateusz Sitarz, Marta Choińska, Izabela Hager, Abdelhafid Khelidj, MATEC Web of Conferences, Vol. 322, number 01043, issue 4 (2020), doi:10.1051/matecconf/202032201043
Digues expérimentales du CER de Rouen en sol limoneux traité à la chaux et non traité : évaluation après 7 ans, Lucile Saussaye, Geetanjali Das, Andry Razakamanantsoa, Erwann Rayssac, Dimitri Deneele, Christophe Chevalier, Louis Battist, Gontran Herrier, Didier Lesueur, Nicolas Poncelet, Delphine Jacqueline, Michel Froumentin, Cindy Maisonnave, Edouard Durand, Harifidy Ranaivomanana, JNGG 2020, 10èmes Journées Nationales de Géotechnique et de Géologie de l'Ingénieur, pp. 9 p (2020)
Plant-based diets to manage the risks and complications of chronic kidney disease, J. J. Carrero, A. González-Ortiz, C. M. Avesani, S. J. L. Bakker, V. Bellizzi, P. Chauveau, C. M. Clase, A. Cupisti, A. Espinosa-Cuevas, P. Molina, Kevin Moreau, G. B. Piccoli, A. Post, S. Sezer, D. Fouque, Nature Reviews Nephrology, Vol. 16, issue 9, pp. 525-542 (2020), doi:10.1038/s41581-020-0297-2
Laser polishing of titanium surfaces obtained by additive manufacturing process, Benoit Rosa, Jean-Yves Hascoët, MATEC Web of Conferences, Vol. 321, number 03034, issue 8 (2020), doi:10.1051/matecconf/202032103034
Behavior of Composite Instrumented by Optical Fiber, Rochdi El Abdi, Vichith Chean, Hossein Ramezani Dana, Pascal Casari, Frédéric Jacquemin, Fourth International Conference on Mechatronics & Cyber-Mechatronics – ICOMECYME2020 (2020)
Durability of self-compacting concretes made with the natural pozzolan and siliceous fines, Kada Ayed, Djamel Eddine Kerdal, Nordine Leklou, Journal of Materials and Engineering Structures (2020)
Time-dependent behaviour of the Callovo-Oxfordian claystone-concrete interface, Eleni Stavropoulou, Matthieu Briffaut, Frédéric Dufour, Guillaume Camps, Journal of Rock Mechanics and Geotechnical Engineering, Vol. 12, issue 1, pp. 89-101 (2020), doi:10.1016/j.jrmge.2019.09.001
Effect of Modeling Techniques on the Simulation: Calculating the Stress Concentration Factors in Square Hollow Section T-Joints as a Case Study, Serwan Talabani, Ahmad Azeez, Silvio DE BARROS, Basim Fadhil, Hewa Omer, ARO-The Scientific Journal of Koya University, Vol. 8, number 88, issue 1 (2020), doi:10.14500/aro.10585
Micromechanical modelling of damage induced by delayed ettringite formation in concrete, Alexandre Yammine, François Bignonnet, Nordine Leklou, Marta Choinska, MATEC Web of Conferences, MATEC Web Conf., Vol. 322, pp. 01037 (2020), doi:10.1051/matecconf/202032201037
Repairing Ti-6Al-4V aeronautical components with DED additive manufacturing, Matthieu Rauch, Jean-Yves Hascoët, Manjaiah Mallaiah, MATEC Web of Conferences, Vol. 321, number 03017, issue 5 (2020), doi:10.1051/matecconf/202032103017
Model-free data-driven inelasticity, R. Eggersmann, T. Kirchdoerfer, S. Reese, Laurent Stainier, M. Ortiz, Computer Methods in Applied Mechanics and Engineering, Vol. 350, issue 11, pp. 81-99 (2019), doi:10.1016/j.cma.2019.02.016
Reliability assessments of corroded pipelines based on internal pressure – A review, Rafael Amaya-Gómez, Mauricio Sánchez-Silva, Emilio Bastidas-Arteaga, Franck Schoefs, Felipe Munoz, Engineering Failure Analysis, Vol. 98, issue 3, pp. 190-214 (2019), doi:10.1016/j.engfailanal.2019.01.064
3D printing for construction based on a complex wall of polymer-foam and concrete, Benoit Furet, Philippe Poullain, Sébastien Garnier, Additive Manufacturing, Vol. 28, issue 1, pp. 58-64 (2019), doi:10.1016/j.addma.2019.04.002
How building energy models take the local climate into account in an urban context – A review, Nicolas Lauzet, Auline Rodler, Marjorie Musy, Marie-Hélène Azam, Sihem Guernouti, Dasaraden Mauree, Thibaut Colinart, Renewable and Sustainable Energy Reviews, Vol. 116, number 109390, issue 06 (2019), doi:10.1016/j.rser.2019.109390
Modeling coupled erosion and filtration of fine particles in granular media, Jie Yang, Zhen-Yu Yin, Farid Laouafa, Pierre-Yves Hicher, Acta Geotechnica, Vol. 14, issue 6, pp. 1615-1627 (2019), doi:10.1007/s11440-019-00808-8
Model-free data-driven methods in mechanics: material data identification and solvers, Laurent Stainier, Adrien Leygue, Michael Ortiz, Computational Mechanics, Vol. 64, issue 2, pp. 381-393 (2019), doi:10.1007/s00466-019-01731-1
High temperature oxidation study of direct laser deposited AlXCoCrFeNi (X=0.3,0.7) high entropy alloys, A. Mohanty, J.K. Sampreeth, Omkar Bembalge, J.Y. Hascoet, S. Marya, R.J. Immanuel, S.K. Panigrahi, Surface and Coatings Technology, Vol. 380, number 125028, issue 5 (2019), doi:10.1016/j.surfcoat.2019.125028
Analysis of suffusion in cohesionless soils with randomly distributed porosity and fines content, Jie Yang, Zhen-Yu Yin, Farid Laouafa, Pierre-Yves Hicher, Computers and Geotechnics, Vol. 111, issue 5, pp. 157-171 (2019), doi:10.1016/j.compgeo.2019.03.011
Renewables energies in Colombia and the opportunity for the offshore wind technology, Juan Gabriel Rueda-Bayona, Andres Guzmán, Juan José Cabello Eras, Rodolfo Silva-Casarín, Emilio Bastidas-Arteaga, José Horrillo-Caraballo, Journal of Cleaner Production, Vol. 220, issue 116, pp. 529-543 (2019), doi:10.1016/j.jclepro.2019.02.174
Internal erosion in dike-on-foundation modeled by a coupled hydromechanical approach, Jie Yang, Zhen-Yu Yin, Farid Laouafa, Pierre-Yves Hicher, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 43, issue 3, pp. 663-683 (2019), doi:10.1002/nag.2877
Development of low pressure cold sprayed copper coatings on carbon fiber reinforced polymer (CFRP), V. Gillet, E. Aubignat, S. Costil, Bruno Courant, C. Langlade, Pascal Casari, W. Knapp, M.P. Planche, Surface and Coatings Technology, Vol. 364, issue 12, pp. 306-316 (2019), doi:10.1016/j.surfcoat.2019.01.011
Quantification of plastic shrinkage cracking in mortars using digital image correlation, I. M.G. Bertelsen, C. Kragh, G. Cardinaud, L. M. Ottosen, G. Fischer, Cement and Concrete Research, Vol. 123, number 105761, issue 4 (2019), doi:10.1016/j.cemconres.2019.05.006
Dynamic modeling of nylon mooring lines for a floating wind turbine, Hong-Duc Pham, Patrice Cartraud, Franck Schoefs, Thomas Soulard, Christian Berhault, Applied Ocean Research, Vol. 87, pp. 1-8 (2019), doi:10.1016/j.apor.2019.03.013
Development and characterization of thermal insulation materials from renewable resources, Marie Viel, Florence Collet, Christophe Lanos, Construction and Building Materials, Vol. 214, issue 1, pp. 685-697 (2019), doi:10.1016/j.conbuildmat.2019.04.139
Experimental and numerical study of the relative humidity effect on drying shrinkage and cracking of self-consolidating concrete, Hamza Samouh, Emmanuel Rozière, Ahmed Loukili, Cement and Concrete Research, Vol. 115, issue 2, pp. 519-529 (2019), doi:10.1016/j.cemconres.2018.08.008
Distributed fiber optics sensing and coda wave interferometry techniques for damage monitoring in concrete structures, Antoine Bassil, Xi Wang, Xavier Chapeleau, Ernst Niederleithinger, Odile Abraham, Dominique Leduc, Sensors, Vol. 19, number 356, issue 2 (2019), doi:10.3390/s19020356
Macroscopic consequences of Piobert–Lüders and Portevin–Le Chatelier bands during tensile deformation in Al-Mg alloys, Baptiste Reyne, Pierre-Yves Manach, Nicolas Moes, Materials Science and Engineering: A, Vol. 746, issue 8, pp. 187-196 (2019), doi:10.1016/j.msea.2019.01.009
3D printed polycarbonate reinforced acrylonitrile–butadiene–styrene composites: Composition effects on mechanical properties, micro-structure and void formation study, Mnvrl Kumar, R. Ramakrishnan, Alnura Omarbekova, Journal of Mechanical Science and Technology, Vol. 33, issue 11, pp. 5219-5226 (2019), doi:10.1007/s12206-019-1011-9
Measuring stress field without constitutive equation, Marie Dalémat, Michel Coret, Adrien Leygue, Erwan Verron, Mechanics of Materials, Vol. 136, number 103087, issue 4 (2019), doi:10.1016/j.mechmat.2019.103087
Data model for additive manufacturing digital thread: state of the art and perspectives, Renan Bonnard, Jean Yves Hascoët, Pascal Mognol, International Journal of Computer Integrated Manufacturing, Vol. 32, issue 12, pp. 1170-1191 (2019), doi:10.1080/0951192X.2019.1690681
Numerical method to model the creep of recycled aggregate concrete by considering the old attached mortar, Menghuan Guo, Frédéric Grondin, Ahmed Loukili, Cement and Concrete Research, Vol. 118, issue 1, pp. 14-24 (2019), doi:10.1016/j.cemconres.2019.01.008
Advanced numerical modelling of caisson foundations in sand to investigate the failure envelope in the H-M-V space, Zhuang Jin, Zhen-Yu Yin, Panagiotis Kotronis, Zheng Li, Ocean Engineering, Vol. 190, number 106394, issue 5 (2019), doi:10.1016/j.oceaneng.2019.106394
Hierarchical object-oriented model (HOOM) for additive manufacturing digital thread, Renan Bonnard, Jean Yves Hascoët, Pascal Mognol, Eduardo Zancul, Alberto J. Alvares, Journal of Manufacturing Systems, Vol. 50, issue 5, pp. 36-52 (2019), doi:10.1016/j.jmsy.2018.11.003
Micro-scale investigation of the role of finer grains in the behavior of bidisperse granular materials, Habib Taha, Ngoc-Son Nguyen, Didier Marot, Abbas Hijazi, Khalil Abou-Saleh, Granular Matter, Vol. 21, number 799, issue 2 (2019), doi:10.1007/s10035-019-0867-9
Experimental and Numerical Investigation of the Fluid-Structure Interaction on a Flexible Composite Hydrofoil under Viscous Flows, Laetitia Pernod, Antoine Ducoin, Herve Le Sourne, Jacques-André Astolfi, Pascal Casari, Ocean Engineering, Vol. 194, number 106647 (2019), doi:10.1016/j.oceaneng.2019.106647
Carbon/polyamide 6 thermoplastic composite cylinders for deep sea applications, Mael Arhant, Christophe Briançon, Christian Burtin, Peter Davies, Composite Structures, Vol. 212, issue 2, pp. 535-546 (2019), doi:10.1016/j.compstruct.2019.01.058
Effect of Heat Input on Microstructure, Residual Stress, and Corrosion Resistance of UNS 32101 Lean Duplex Stainless Steel Weld Joints, Naima Ouali, Khadidja Khenfer, Brahim Belkessa, Jamal Fajoui, Billel Cheniti, Brahim Idir, Samuel Branchu, Journal of Materials Engineering and Performance, Vol. 28, issue 7, pp. 4252-4264 (2019), doi:10.1007/s11665-019-04194-w
Resistance to mold development assessment of bio-based building materials, M. Viel, F. Collet, Yann Lecieux, M.L.M. François, V. Colson, Christophe Lanos, A. Hussain, M. Lawrence, Composites Part B: Engineering, Vol. 158, issue F1120, pp. 406-418 (2019), doi:10.1016/j.compositesb.2018.09.063
Study of hygroscopic stresses in asymmetric biocomposite laminates, Mael Péron, Amandine Célino, Mickael Castro, Frédéric Jacquemin, Antoine Le Duigou, Composites Science and Technology, Vol. 169, issue 6, pp. 7-15 (2019), doi:10.1016/j.compscitech.2018.10.027
Natural hydraulic lime for blended cement mortars: Behavior from fresh to hardened states, Reda Jaafri, Abdelilah Aboulayt, Syed Yasir Alam, Emmanuel Rozière, Ahmed Loukili, Cement and Concrete Research, Vol. 120, issue 6, pp. 52-65 (2019), doi:10.1016/j.cemconres.2019.03.003
Modeling of pipeline corrosion degradation mechanism with a Lévy Process based on ILI (In-Line) inspections, Rafael Amaya-Gómez, Javier Riascos-Ochoa, Felipe Munoz, Emilio Bastidas-Arteaga, Franck Schoefs, Mauricio Sánchez-Silva, International Journal of Pressure Vessels and Piping, Vol. 172, issue 5, pp. 261-271 (2019), doi:10.1016/j.ijpvp.2019.03.001
Stochastic Modeling of Forces on Jacket-Type Offshore Structures Colonized by Marine Growth, Hamed Ameryoun, Franck Schoefs, Laurent Barillé, Yoann Thomas, Journal of Marine Science and Engineering, Vol. 7, number 158, issue 5 (2019), doi:10.3390/jmse7050158
Effect of Cement Type on the Mechanical Behavior and Permeability of Concrete Subjected to High Temperatures, Izabela Hager, Tomasz Tracz, Marta Choinska Colombel, Katarzyna Mróz, Materials, Vol. 12, number 3021, issue 18 (2019), doi:10.3390/ma12183021
Towards a multi-sensor monitoring methodology for AM metallic processes, A. Chabot, M. Rauch, J. Y. Hascoët, Welding in the World, Vol. 63, issue 3, pp. 759-769 (2019), doi:10.1007/s40194-019-00705-4
Theoretical assessment of the elastic modulus of natural fiber-based intra-ply hybrid composites, S. Budhe, Silvio DE BARROS, M. Banea, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 41, number 563, issue 6 (2019), doi:10.1007/s40430-019-1766-z
Integrity assessment of corroded pipelines using dynamic segmentation and clustering, Rafael Amaya-Gómez, Mauricio Sánchez-Silva, Felipe Muñoz, Process Safety and Environmental Protection, Vol. 128, pp. 284-294 (2019), doi:10.1016/j.psep.2019.05.049
Non-parametric material state field extraction from full field measurements, Adrien Leygue, Rian Seghir, Julien Réthoré, Michel Coret, Erwan Verron, Laurent Stainier, Computational Mechanics, Vol. 64, issue 2, pp. 501-509 (2019), doi:10.1007/s00466-019-01725-z
An experimental study on the influence of the coordination number on grain crushing, Younes Salami, Christophe Dano, Pierre-Yves Hicher, European Journal of Environmental and Civil Engineering, Vol. 23, issue 3, pp. 432-448 (2019), doi:10.1080/19648189.2017.1285251
In situ DC electrical resistivity mapping performed in a reinforced concrete wharf using embedded sensors, Johann Priou, Yann Lecieux, Mathilde Chevreuil, Virginie Gaillard, Cyril Lupi, Dominique Leduc, Emmanuel Rozière, Romain Guyard, Franck Schoefs, Construction and Building Materials, Vol. 211, issue 01, pp. 244-260 (2019), doi:10.1016/j.conbuildmat.2019.03.152
Hygroscopic multi-scale behavior of polypropylene matrix reinforced with flax fibers, Ziad El Hachem, Amandine Célino, Georges Challita, Marie-José Moya, Sylvain Fréour, Industrial Crops and Products, Vol. 140, number 111634, issue A1 (2019), doi:10.1016/j.indcrop.2019.111634
Methodology for modeling and service life monitoring of mooring lines of floating wind turbines, Hong-Duc Pham, Franck Schoefs, Patrice Cartraud, Thomas Soulard, Hien-Hau Pham, Christian Berhault, Ocean Engineering, Vol. 193, number 106603, issue 6 (2019), doi:10.1016/j.oceaneng.2019.106603
Tribological performance characterization of brake friction materials: What test? What coefficient of friction?, Mohamed Kchaou, Amira Sellami, Jamal Fajoui, Recai Kus, Riadh Elleuch, Frédéric Jacquemin, Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, Vol. 233, issue 1, pp. 214-226 (2019), doi:10.1177/1350650118764167
Additive manufacturing processes from an environmental point of view: a new methodology for combining technical, economic, and environmental predictive models, Mazyar Yosofi, Olivier Kerbrat, Pascal Mognol, International Journal of Advanced Manufacturing Technology, Vol. 102, issue 9-12, pp. 4073-4085 (2019), doi:10.1007/s00170-019-03446-2
Strain-based methodology for mixed-mode I+II fracture: A new partitioning method for bi-material adhesively bonded joints, Marcio Moreira Arouche, Wandong Wang, Sofia Teixeira de Freitas, Silvio DE BARROS, The Journal of Adhesion, Vol. 95, issue 5-7, pp. 385-404 (2019), doi:10.1080/00218464.2019.1565756
A hypoplastic macroelement model for a caisson foundation in sand under monotonic and cyclic loadings, Zhuang Jin, Zhen-Yu Yin, Panagiotis Kotronis, Zheng Li, Claudio Tamagnini, Marine Structures, Vol. 66, pp. 16-26 (2019), doi:10.1016/j.marstruc.2019.02.002
Controlling Anthropogenic and Natural Seismicity: Insights From Active Stabilization of the Spring‐Slider Model, Ioannis Stefanou, Journal of Geophysical Research : Solid Earth, Vol. 124, issue 8, pp. 8786-8802 (2019), doi:10.1029/2019JB017847
Representative elementary area of shale at the mesoscopic scale, Philippe Cosenza, Dimitri Prêt, Anne-Laure Fauchille, Stephen Hedan, International Journal of Coal Geology, Vol. 216, number 103316, issue 2 (2019), doi:10.1016/j.coal.2019.103316
A comprehensive approach for mesoscale discrete element modelling of mechanical and fracture behavior of concrete, Ran Zhu, Syed Yasir Alam, Ahmed Loukili, Granular Matter, Vol. 21, number 927, issue 1 (2019), doi:10.1007/s10035-018-0858-2
Laser metal deposition and wire arc additive manufacturing of materials: An overview, R. Rumman, D. A. Lewis, J. Y. Hascoet, J. S. Quinton, Archives of Metallurgy and Materials, pp. 467-473 (2019), doi:10.24425/amm.2019.127561
Mechanical signature and full-field measurement of flow-induced large in-plane deformation of fibrous reinforcements in composite processing, Alexandre Hautefeuille, Sebastien Comas-Cardona, Christophe Binetruy, Composites Part A: Applied Science and Manufacturing, Vol. 118, issue 6, pp. 213-222 (2019), doi:10.1016/j.compositesa.2018.12.030
Numerical investigation on evolving failure of caisson foundation in sand using the combined Lagrangian-SPH method, Zhuang Jin, Zhen Yu Yin, Panagiotis Kotronis, Yin Fu Jin, Marine Georesources and Geotechnology, Vol. 37, issue 1, pp. 23-35 (2019), doi:10.1080/1064119X.2018.1425311
Modeling time and spatial variability of degradation through gamma processes for structural reliability assessment, Mestapha Oumouni, Franck Schoefs, Bruno Castanier, Structural Safety, Vol. 76, issue 11, pp. 162-173 (2019), doi:10.1016/j.strusafe.2018.09.003
A straightforward procedure of parameters determination for sand: a bridge from critical state based constitutive modelling to finite element analysis, Ze Xiang Wu, Zhen Yu Yin, Yin Fu Jin, Xue Yu Geng, European Journal of Environmental and Civil Engineering, Vol. 23, issue 12, pp. 1444-1466 (2019), doi:10.1080/19648189.2017.1353442
Bonded composite repair of metallic pipeline using energy release rate method, P. Zugliani, M. Banea, S. Budhe, R. Carbas, L. da Silva, N. Rohem, Silvio DE BARROS, Journal of Adhesion Science and Technology, Vol. 33, issue 19, pp. 2141-2156 (2019), doi:10.1080/01694243.2019.1632537
Hemp-straw composites: Gluing study and multi-physical characterizations, Marie Viel, Florence Collet, Sylvie Prétot, Christophe Lanos, Materials, Vol. 12, number 1199, issue 8 (2019), doi:10.3390/ma12081199
Climate adaptation engineering: Risks and economics for infrastructure decision-making, Emilio Bastidas-Arteaga, Mark G. Stewar, ISBN:[9780128167823], Elsevier (2019), doi:10.1016/C2017-0-00942-4
Direct observation of the displacement field and microcracking in a glass by means of X-ray tomography during in situ Vickers indentation experiment, Tanguy Lacondemine, Julien Réthoré, E Maire, Fabrice Célarié, Patrick Houizot, Clément Roux-Langlois, Christian Schlepütz, Tanguy Rouxel, Acta Materialia, Vol. 179, issue 12, pp. 424-433 (2019), doi:10.1016/j.actamat.2019.07.053
Numerical investigation on dynamic ultimate strength of stiffened panels considering real loading scenarios, George Jagite, Fabien Bigot, Quentin Derbanne, Šime Malenica, Hervé Le Sourne, Jérôme De Lauzon, Patrice Cartraud, Ships and Offshore Structures, Vol. 14, issue sup1, pp. 374-386 (2019), doi:10.1080/17445302.2019.1601329
Using blister test to predict the failure pressure in bonded composite repaired pipes, Silvio DE BARROS, B.M. Fadhil, Fahmi Alila, J. Diop, J.M.L. Reis, Pascal Casari, Frédéric Jacquemin, Composite Structures, Vol. 211, issue 12, pp. 125-133 (2019), doi:10.1016/j.compstruct.2018.12.030
Monitoring of a Reinforced Concrete Wharf Using Structural Health Monitoring System and Material Testing, Yann Lecieux, Emmanuel Rozière, Virginie Gaillard, Cyril Lupi, Dominique Leduc, Johann Priou, Romain Guyard, Mathilde Chevreuil, Franck Schoefs, Journal of Marine Science and Engineering, Vol. 7, number 84, issue 4 (2019), doi:10.3390/jmse7040084
Bayesian inference method for in situ thermal conductivity and heat capacity identification: Comparison to ISO standard, Auline Rodler, Sihem Guernouti, Marjorie Musy, Construction and Building Materials, Vol. 196, pp. 574-593 (2019), doi:10.1016/j.conbuildmat.2018.11.110
Multiscale modeling of unsaturated granular materials based on thermodynamic principles, Chao Fa Zhao, Younes Salami, Pierre Yves Hicher, Zhen Yu Yin, Continuum Mechanics and Thermodynamics, Vol. 31, issue 1, pp. 341-359 (2019), doi:10.1007/s00161-018-0736-5
Probabilistic approach of a flow pattern map for horizontal, vertical, and inclined pipes, Rafael Amaya-Gómez, Jorge López, Hugo Pineda, Diana Urbano-Caguasango, Jorge Pinilla, Nicolás Ratkovich, Felipe Muñoz, Oil & Gas Science and Technology - Revue d'IFP Energies nouvelles, Vol. 74, number 67, issue 6 (2019), doi:10.2516/ogst/2019034
Convergence of sensitivity analysis methods for evaluating combined influences of model inputs, Majdi Awad, Tristan Senga Kiessé, Zainab Assaghir, Anne Ventura, Reliability Engineering and System Safety, Vol. 189, pp. 109-122 (2019), doi:10.1016/j.ress.2019.03.050
A physically-based model for strain-induced crystallization in natural rubber. Part II: Derivation of the mechanical model, Alice Gros, Erwan Verron, Bertrand Huneau, Journal of the Mechanics and Physics of Solids, Vol. 125, issue 15, pp. 255-275 (2019), doi:10.1016/j.jmps.2018.12.014
In situ real-time 3D observation of porosity growth during composite part curing by ultra-fast synchrotron X-ray microtomography, Basile de Parscau Du Plessix, Patrice Lefébure, Nicolas Boyard, Steven Le Corre, Nicolas Lefevre, Frédéric Jacquemin, Vincent Sobotka, Sabine Rolland Du Roscoat, Journal of Composite Materials, Vol. 53, issue 28-30, pp. 4105-4116 (2019), doi:10.1177/0021998319846260
Interlaminar adhesion assessment of carbon-epoxy laminates under salt water ageing using peel tests, Marcio M. Arouche, Sandip Budhe, Mariana D. Banea, Sofia Teixeira de Freitas, Silvio de Barros, Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, Vol. 233, issue 8, pp. 1555-1563 (2019), doi:10.1177/1464420718766626
Statistical representative elementary area of shale inferred by micromechanics, Philippe Cosenza, Anne-Laure Fauchille, Dimitri Prêt, Stephen Hedan, Albert Giraud, International Journal of Engineering Science, Vol. 142, issue 2, pp. 53-73 (2019), doi:10.1016/j.ijengsci.2019.05.012
Identification of fracture models based on phase field for crack propagation in heterogeneous lattices in a context of non-separated scales, Nhu Nguyen, J. Yvonnet, J. Réthoré, A. B. Tran, Computational Mechanics, Vol. 63, issue 5, pp. 1047-1068 (2019), doi:10.1007/s00466-018-1636-z
An efficient strategy for large scale 3D simulation of heterogeneous materials to predict effective thermal conductivity, Xiaodong Liu, Julien Réthoré, Marie-Christine Baietto, Philippe Sainsot, Antonius Adrianus Lubrecht, Computational Materials Science, Vol. 166, pp. 265-275 (2019), doi:10.1016/j.commatsci.2019.05.004
A physically-based model for strain-induced crystallization in natural rubber. Part I: Life cycle of a crystallite, Alice Gros, Bertrand Huneau, Erwan Verron, Masatoshi Tosaka, Journal of the Mechanics and Physics of Solids, Vol. 125, issue 15, pp. 164-177 (2019), doi:10.1016/j.jmps.2018.12.011
Experimental approach to investigate creep-damage bilateral effects in concrete at early age, M. Farah, F. Grondin, S. Y. Alam, A. Loukili, Cement and Concrete Composites, Vol. 96, issue 1, pp. 128-137 (2019), doi:10.1016/j.cemconcomp.2018.11.022
Non-invasive tunnel convergence measurement based on distributed optical fiber strain sensing, Arianna Piccolo, Yann Lecieux, Sylvie Lesoille, Dominique Leduc, Smart Materials and Structures, Vol. 28, number 045008, issue 4 (2019), doi:10.1088/1361-665x/ab04cc
From linear to nonlinear PGD-based parametric structural dynamics, Giacomo Quaranta, Clara Argerich Martin, Rubén Ibáñez, Jean Louis Duval, Elías Cueto, Francisco Chinesta, Comptes Rendus. Mécanique, Vol. 347, issue 5, pp. 445-454 (2019), doi:10.1016/j.crme.2019.01.005
Resistance of alkali-activated grouts to acid leaching, Anass Cherki El Idrissi, Emmanuel Rozière, Sabine Darson-Balleur, Ahmed Loukili, Construction and Building Materials, Vol. 228, number 116681, issue 12 (2019), doi:10.1016/j.conbuildmat.2019.116681
Influence of thermal cycles on the deformation of soil-pile interface in energy piles, Roxana Vasilescu, Kexin Yin, Anne-Laure Fauchille, Panagiotis Kotronis, Christophe Dano, Richard Manirakiza, Philippe Gotteland, E3S Web of Conferences, 7th International Symposium on Deformation Characteristics of Geomaterials (IS-Glasgow 2019), ISBN:[9782759890644] (2019), doi:10.1051/e3sconf/20199213004
Corrosion of concrete and steel structures in a changing climate, Mark G. Stewart, Emilio Bastidas-Arteaga, ISBN:[9780128167823], Elsevier (2019), doi:10.1016/B978-0-12-816782-3.00004-8
Modelling of internal erosion based on mixture theory: General framework and a case study of soil suffusion, Tuan‐anh Bui, Rachel Gelet, Didier Marot, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 43, issue 15, pp. 2407-2430 (2019), doi:10.1002/nag.2981
A multifiber Timoshenko beam with embedded discontinuities, Ibrahim Bitar, Nathan Benkemoun, Panagiotis Kotronis, Stéphane Grange, Engineering Fracture Mechanics, Vol. 214, issue 6, pp. 339-364 (2019), doi:10.1016/j.engfracmech.2019.03.032
Investigating the early-age diffusion of chloride ions in hardening slag-blended mortars on the light of their hydration progress, Amor Ben Fraj, Stéphanie Bonnet, Nordine Leklou, Abdelhafid Khelidj, Construction and Building Materials, Vol. 225, pp. 485-495 (2019), doi:10.1016/j.conbuildmat.2019.07.185
Uncertainty assessment of concrete electrical resistivity measurements on a coastal bridge., Lucas Bourreau, Véronique Bouteiller, Franck Schoefs, Laurent Gaillet, Benoit Thauvin, Julien Schneider, Samuel Naar, Structure and Infrastructure Engineering, Vol. 15, issue 4, pp. 443-453 (2019), doi:10.1080/15732479.2018.1557703
Uncertainty quantification for acoustic wave propagation in a shallow water environment, Shahram Khazaie, Xun Wang, Dimitri Komatitsch, Pierre Sagaut, Wave Motion, Vol. 91, number 102390, issue 3 (2019), doi:10.1016/j.wavemoti.2019.102390
Coupled temperature and γ-radiation effect on silica-based optical fiber strain sensors based on Rayleigh and Brillouin scatterings, A. Piccolo, S. Delepine-Lesoille, M. Landolt, S. Girard, Y. Ouerdane, C. Sabatier, Optics Express, Vol. 27, number 21608, issue 15 (2019), doi:10.1364/OE.27.021608
Quantifying uncertainties in contact mechanics of rough surfaces using the multilevel Monte Carlo method, Valentine Rey, Sebastian Krumscheid, Fabio Nobile, International Journal of Engineering Science, Vol. 138, issue 5, pp. 50-64 (2019), doi:10.1016/j.ijengsci.2019.02.003
SCAP-1D : A Spatial Correlation Assessment Procedure from unidimensional discrete data, Romain Clerc, Mestapha Oumouni, Franck Schoefs, Reliability Engineering and System Safety, Vol. 191, number 106498, issue 3 (2019), doi:10.1016/j.ress.2019.106498
A method to assess the suffusion susceptibility of low permeability core soils in compacted dams based on construction data, Lingran Zhang, Rachel Gelet, Didier Marot, Marc Smith, Jean Marie Konrad, European Journal of Environmental and Civil Engineering, Vol. 23, issue 5, pp. 626-644 (2019), doi:10.1080/19648189.2018.1474386
Properties of compressed earth blocks made of traditional materials from Benin, Philippe Poullain, Nordine Leklou, Armel BabatoundéLaibi, Moussa Gomina, Revue Des Composites Et Des Materiaux Avances, Vol. 29, issue 4, pp. 233-241 (2019), doi:10.18280/rcma.290407
Effective transient behaviour of heterogeneous media in diffusion problems with a large contrast in the phase diffusivities, Laurence Brassart, Laurent Stainier, Journal of the Mechanics and Physics of Solids, Vol. 124, pp. 366-391 (2019), doi:10.1016/j.jmps.2018.10.021
Homogenization of Fickian and non-Fickian water diffusion in composites reinforced by hydrophobic long fibers: Application to the determination of transverse diffusivity, T. Peret, Alexandre Clément, Sylvain Fréour, Frédéric Jacquemin, Composite Structures, Vol. 226, number 111191 (2019), doi:10.1016/j.compstruct.2019.111191
Durability of Composite Materials under Severe Temperature Conditions: Influence of Moisture Content and Prediction of Thermo-Mechanical Properties During a Fire, Juan Pablo Márquez Costa, Vincent Legrand, Sylvain Fréour, Journal of Composites Science, Vol. 3, number 55, issue 2 (2019), doi:10.3390/jcs3020055
Experimental and numerical investigations on dynamic behavior of CFRP laminates, R.S.B Rathod, M.D Goel, Tanusree Chakraborty, Vasant Matsagar, Pierrick Guégan, Christophe Binetruy, SN Applied Sciences, Vol. 1, number 223, issue 7 (2019), doi:10.1007/s42452-019-0732-9
Modeling the effect of damage on diffusive behavior in a polymeric matrix composite material, Hocine Bourennane, Djelloul Gueribiz, Silvain Fréour, Frédéric Jacquemin, Journal of Reinforced Plastics and Composites, Vol. 38, issue 15, pp. 717-733 (2019), doi:10.1177/0731684419845479
Impact of Temperature Cycles at Soil Concrete Interface for Energy Piles, Andreea Roxana Vasilescu, Anne Laure Fauchille, Christophe Dano, Panagiotis Kotronis, Richard Manirakiza, Philippe Gotteland, Energy Geotechnics, Vol. 62, pp. 35-42, ISBN:[9783319563961, 9783319996691, 9783642196294, 9789400714205, 9789811066313, 9789811075599], Springer International Publishing (2019), doi:10.1007/978-3-319-99670-7_5
Effects of material and process parameters on in-situ consolidation, Angel León, Clara Argerich Martin, Anaïs Barasinski, Eric Soccard, Francisco Chinesta, International Journal of Material Forming, Vol. 12, issue 4, pp. 491-503 (2019), doi:10.1007/s12289-018-1430-7
Experimental determination of GFRC tensile parameters from three-point bending tests using an analytical damage model, Marwa Loukil, Wiem Ben Hassine, Oualid Limam, Panagiotis Kotronis, Construction and Building Materials, Vol. 223, issue 02, pp. 477-490 (2019), doi:10.1016/j.conbuildmat.2019.07.005
On the Proper Generalized Decomposition applied to microwave processes involving multilayered components, Hermine Tertrais, Rubén Ibáñez Pinillo, Anaïs Barasinski, Chady Ghnatios, Francisco Chinesta, Mathematics and Computers in Simulation, Vol. 156, issue 5, pp. 347-363 (2019), doi:10.1016/j.matcom.2018.09.008
Electrochemical characteristics of NixN thin films deposited by DC and HiPIMS reactive magnetron sputtering, J. Keraudy, L. Athouël, J. Hamon, B. Girault, D. Gloaguen, M. Richard-Plouet, P.-Y. Jouan, Thin Solid Films, Vol. 669, pp. 659-664 (2019), doi:10.1016/j.tsf.2018.10.041
Lax-Wendroff schemes for elastic-plastic solids, Thomas Heuzé, Journal of Computational Physics, Vol. 396, issue 1, pp. 89-105 (2019), doi:10.1016/j.jcp.2019.06.050
Assessing the influence of fieldshaper material on magnetic pulse welded interface of Al/Cu joints, Jishuai Li, Rija Nirina Raoelison, Thaneshan Sapanathan, Guillaume Racineux, Mohamed Rachik, Procedia Manufacturing, Vol. 29, pp. 337-344 (2019), doi:10.1016/j.promfg.2019.02.146
Experimental and numerical analysis of curling behavior of natural hydraulic lime - cement based mortars, Reda Jaafri, Hamza Samouh, Emmanuel Roziere, Syed Yasir Alam, Vincent Wisniewski, Ahmed Loukili, Cement and Concrete Research, Vol. 117, issue 4, pp. 1-15 (2019), doi:10.1016/j.cemconres.2018.11.016
Thermomechanical characterization of a low viscosity PA66 thermoplastic matrix and associated continuous glass fibre composite under processing conditions, Mael Péron, Frédéric Jacquemin, Pascal Casari, Gilles Orange, Jean-Luc Bailleul, Nicolas Boyard, Journal of Composite Materials, Vol. 53, issue 22, pp. 3169-3186 (2019), doi:10.1177/0021998319862344
Influence of sample preparation on the multi scale structure of sand-clay mixtures, Kexin Yin, Khaoula Othmani, Giulio Sciarra, Panagiotis Kotronis, Yannick Benoit, Francois Bertrand, Samuel Branchu, E3S Web of Conferences, E3S Web of Conferences, Vol. 92, pp. 01007, ISBN:[9782759890644], EDP Sciences (2019), doi:10.1051/e3sconf/20199201007
Examination of the dynamic effects on the hull girder ultimate strength of ultra large container ships, G. Jagite, H. Le Sourne, P. Cartraud, F. Bigot, Q. Derbanne, Malenica, Trends in the Analysis and Design of Marine Structures Proceedings of the 7th International Conference on Marine Structures Marstruct 2019, pp. 137-148, ISBN:[9780367278090], CRC Press (2019), doi:10.1201/9780429298875-15
Effect of thermal damage on mechanical behavior and transport properties of self-compacting concrete incorporating polypropylene fibers, Davood Niknezhad, Stéphanie Bonnet, Nordine Leklou, Ouali Amiri, Journal of Adhesion Science and Technology, Vol. 33, issue 23, pp. 2535-2566 (2019), doi:10.1080/01694243.2019.1650427
Transport properties study of supplementary cementitious materials: case of tuff, limestone filler and granodiorite, Meriem Meziani, Ouali Amiri, Nordine Leklou, Nasser Chelouah, Journal of Adhesion Science and Technology, Vol. 33, issue 3, pp. 286-300 (2019), doi:10.1080/01694243.2018.1537057
Morphing Hydrofoil Model Driven by Compliant Composite Structure and Internal Pressure, Mohammed Arab Fatiha, Benoît Augier, François Deniset, Pascal Casari, Jacques André Astolfi, Journal of Marine Science and Engineering, Vol. 7, number 423, issue 12 (2019), doi:10.3390/jmse7120423
Manufacturing of a hollow propeller blade with WAAM process - From the material characterisation to the achievement, G. Pechet, J. Y. Hascoet, M. Rauch, G. Ruckert, A. S. Thorr, Industry 4 0 Shaping the Future of the Digital World Proceedings of the 2nd International Conference on Sustainable Smart Manufacturing S2m 2019, pp. 155-160, ISBN:[9780367422721] (2019)
FBG sensors and signal-based detection method for failure detection of an offshore wind turbine grouted connection, Nathalie Müller, Peter Kraemer, Dominique Leduc, Franck Schoefs, International Journal of Offshore and Polar Engineering, Vol. 29, issue 1, pp. 1-7 (2019), doi:10.17736/ijope.2019.mm20
Revealing of interphases in bonded joints with a fiber optic sensor based on Fresnel reflection, Romain Grangeat, Marion Girard, Cyril Lupi, Dominique Leduc, Frédéric Jacquemin, International Journal of Adhesion and Adhesives, Vol. 91, issue 3, pp. 12-18 (2019), doi:10.1016/j.ijadhadh.2019.02.009
Adaptation of Residential Buildings to Coastal Floods: Strategies, Costs and Efficiency, Axel Creach, Emilio Bastidas-Arteaga, Sophie Pardo, Denis Mercier, pp. 245-270, Elsevier (2019), doi:10.1016/b978-0-12-816782-3.00008-5
Effects of acrylonitrile content and hydrogenation on fatigue behaviour of HNBR, Kubat Narynbek Ulu, Bertrand Huneau, Erwan Verron, Anne-Sophie Béranger, Patrick Heuillet, Fatigue and Fracture of Engineering Materials and Structures, Vol. 42, issue 7, pp. 1578-1594 (2019), doi:10.1111/ffe.12974
Prediction of Failure Pressure for Defective Pipelines Reinforced with Composite System, Accounting for Pipe Extremities, S. Budhe, M. Banea, Silvio DE BARROS, Journal of Failure Analysis and Prevention, Vol. 19, issue 6, pp. 1832-1843 (2019), doi:10.1007/s11668-019-00782-z
Durability of composite assemblies under extreme conditions: Thermomechanical damage prediction of a double-lap bonded composite assembly subject to impact and high temperature, Georgio Rizk, Roula Nahas, Khaled Khalil, Georges Challita, Vincent Legrand, Pascal Casari, Frédéric Jacquemin, Composite Structures, Vol. 213, issue 3, pp. 58-70 (2019), doi:10.1016/j.compstruct.2019.01.001
Effect of microstructure on hydric strain in clay rock: A quantitative comparison, Anne Laure Fauchille, Stephen Hedan, Valéry Valle, Dimitri Prêt, Justo Cabrera, Philippe Cosenza, Applied Clay Science, Vol. 182, number 105244, issue 4 (2019), doi:10.1016/j.clay.2019.105244
The effect of metakaolin on internal sulphate attack of the heat-cured mortars, Van Huong Nguyen, Nordine Leklou, Pierre Mounanga, Revista Romana De Materiale Romanian Journal of Materials, Vol. 49, pp. 51-57 (2019)
Outdoor Air Temperature Measurement: A Semi-Empirical Model to Characterize Shelter Performance, Jérémy Bernard, Pascal Kéravec, Benjamin Morille, Erwan Bocher, Marjorie Musy, Isabelle Calmet, Climate, Vol. 7, number 26, issue 2 (2019), doi:10.3390/cli7020026
Introduction of intra-tow release/storage mechanisms in reactive dual-scale flow numerical simulations, Mathieu Imbert, Sebastien Comas-Cardona, Emmanuelle Abisset-Chavanne, David Prono, Journal of Composite Materials, Vol. 53, issue 1, pp. 125-140 (2019), doi:10.1177/0021998318780498
Investigation of vibration modes of a double-lap bonded joint, Amal Zeaiter, Georges Challita, Khaled Khalil, SN Applied Sciences, Vol. 1, number 299, issue 5 (2019), doi:10.1007/s42452-019-0340-8
Effect of erosion by sand particles on wind turbine blades performance in arid and semi-arid areas, A. Rezig, A. Yousfi, S. Fréour, F. Jacquemin, International Journal of Engineering Research in Africa, Vol. 42, pp. 24-33 (2019), doi:10.4028/www.scientific.net/JERA.42.24
Effect of Low Calcite Addition on Sulfate Resisting (SR) Portland Cements: Hydration Kinetics at Early Age and Durability Performance After 2 Years, Islem Labidi, Sonia Boughanmi, Abdelhafid Khelidj, Mohamed El Maaoui, Adel Megriche, Chemistry Africa, Vol. 2, issue 3, pp. 401-414 (2019), doi:10.1007/s42250-019-00047-0
Introduction to climate adaptation engineering, Mark G. Stewart, Emilio Bastidas-Arteaga, ISBN:[9780128167823], Elsevier (2019), doi:10.1016/B978-0-12-816782-3.00001-2
Multi-scale modeling and simulation of thermoplastic automated tape placement: Effects of metallic particles reinforcement on part consolidation, Angel León, Marta Perez, Anaïs Barasinski, Emmanuelle Abisset-Chavanne, Brigitte Defoort, Francisco Chinesta, Nanomaterials, Vol. 9, number 695, issue 5 (2019), doi:10.3390/nano9050695
What about the relevance of the diffusion parameters identified in the case of incomplete Fickian and non-Fickian kinetics?, Julie Cocaud, Amandine Célino, Sylvain Fréour, Frédéric Jacquemin, Journal of Composite Materials, Vol. 53, issue 11, pp. 1555-1565 (2019), doi:10.1177/0021998318805823
Probabilistic analysis of strip footings based on enhanced Kriging metamodeling, Abdul‐kader El Haj, Abdul‐hamid Soubra, Tamara Al-Bittar, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 43, issue 17, pp. 2667-2686 (2019), doi:10.1002/nag.2995
Constitutive modeling of randomly oriented electrospun nanofibrous membranes, Dannee Wong, Erwan Verron, Andri Andriyana, Bee Chin Ang, Continuum Mechanics and Thermodynamics, Vol. 31, issue 1, pp. 317-329 (2019), doi:10.1007/s00161-018-0687-x
Compact structures as true non-linear phenomena, Emilio N. M. Cirillo, Giuseppe Saccomandi, Giulio Sciarra, Mathematics in Engineering, Vol. 1, issue 3, pp. 434-446 (2019), doi:10.3934/mine.2019.3.434
Using a penalty term to deal with spurious oscillations in second gradient finite elements, Marc Soufflet, Gwendal Jouan, Panagiotis Kotronis, Frédéric Collin, International Journal of Damage Mechanics, Vol. 28, issue 3, pp. 346-366 (2019), doi:10.1177/1056789518769341
Influence of relative humidity and temperature on the sol-gel transition of a siloxane surface treatment, Quentin Hatte, Pierre-Antoine Dubos, Nadia Guitter, Mireille Richard-Plouet, Pascal Casari, Journal of Sol-Gel Science and Technology, Vol. 90, issue 2, pp. 230-240 (2019), doi:10.1007/s10971-019-04929-0
Reliability of the Data-Driven Identification algorithm with respect to incomplete input data, Marie Dalémat, Michel Coret, Adrien Leygue, Erwan Verron, Constitutive Models for Rubber XI, pp. 311-316, ISBN:[9780367342586], CRC Press (2019), doi:10.1201/9780429324710-55
Model for optimal sectioning of hydrocarbon transportation pipelines by minimization of the expected economic losses, Andrés F. Pérez-Suárez, Sergio Cabrales, Rafael Amaya-Gómez, Felipe Muñoz, Journal of Loss Prevention in the Process Industries, Vol. 62, number 103939, issue Part A (2019), doi:10.1016/j.jlp.2019.103939
Influence of carbonation on ionic transport in unsaturated concrete: evolution of porosity and prediction of service life, Mohamad Achour, Ouali Amiri, François Bignonnet, Emmanuel Roziere, European Journal of Environmental and Civil Engineering, Vol. 23, issue 5, pp. 593-608 (2019), doi:10.1080/19648189.2018.1455609
New Apparatus for Assessing Soil Suffusion Susceptibility Under Two Flow Directions, Didier Marot, Fateh Bendahmane, Van Thao Le, Internal Erosion in Earthdams, Dikes and Levees, Vol. 17, pp. 69-80, ISBN:978-3-319-99422-2, Springer International Publishing (2019), doi:10.1007/978-3-319-99423-9_7
Mesoscopic Strain Fields Measurement During the Allotropic α − γ Transformation in High Purity Iron, Nicolas Bruzy, Michel Coret, Bertrand Huneau, Guillaume Kermouche, Marilyne Mondon, Emmanuel Bertrand, Laurent Stainier, Experimental Mechanics, Vol. 59, issue 8, pp. 1145-1157 (2019), doi:10.1007/s11340-019-00525-z
An innovative technique for real-time adjusting exposure time of silicon-based camera to get stable gray level images with temperature evolution, Chao Zhang, Jérémy Marty, Anne Maynadier, Philippe Chaudet, Julien Réthoré, Marie-Christine Baietto, Mechanical Systems and Signal Processing, Vol. 122, pp. 419-432 (2019), doi:10.1016/j.ymssp.2018.12.042
Assessment of data-driven computational mechanics in finite strain elasticity, A. Platzer, A. Leygue, L. Stainier, Constitutive Models for Rubber Xi Proceedings of the 11th European Conference on Constitutive Models for Rubber 2019, pp. 230-235, ISBN:[9780367342586], CRC Press (2019), doi:10.1201/9780429324710-41
Distributed Fiber Optic Sensors for multiple crack monitoring in reinforced concrete structures, Antoine Bassil, Ernst Niederleithinger, Xin Wang, Daniel Kadoke, Xavier Chapeleau, Dominique Leduc, Odile Abraham, Mathias Breithaupt, Samuel Potschke, 12th International Workshop on Structural Health Monitoring, IWSHM, pp. 1-10, ISBN:[9781605956015] (2019), doi:10.12783/shm2019/32133
Image-based Stress Field Reconstruction in Complex Media, Rian Seghir, F Pierron, L Fletcher, Residual Stress, Thermomechanics and Infrared Imaging, Hybrid Techniques and Inverse Problems - Proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics, ISBN:[9783319950730] (2019)
Fatigue crack initiation around inclusions for a carbon black filled natural rubber: an analysis based on micro-tomography, Thomas Glanowski, Yann Marco, V. Le Saux, Bertrand Huneau, Clément Champy, Pierre Charrier, 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), Vol. XI, ISBN:[9780367342586], Taylor & Francis (2019), doi:10.1201/9780429324710
The development of a global mix design and analysis approach for alkali activated soil reinforcement grouts, Anass Cherki El Idrissi, European Journal of Environmental and Civil Engineering, Vol. 23, issue 5, pp. 645-656 (2019), doi:10.1080/19648189.2018.1519461
Constitutive Modeling of a Suffusive Soil with Porosity-Dependent Plasticity, Quentin Rousseau, Giulio Sciarra, Rachel Gelet, Didier Marot, Internal Erosion in Earthdams, Dikes and Levees, Vol. 17, pp. 168-179, ISBN:978-3-319-99422-2, Springer International Publishing (2019), doi:10.1007/978-3-319-99423-9_16
French national project “perfdub” on performance- based approach: Mapping of durability indicators results on extended concrete compositions, French national project “Perfdub” on performance-based approach: Mapping of durability indicators results on extended concrete compositions, Jonathan Mai-Nhu, Patrick Rougeau, Olivier Collin, Emmanuel Roziere, Francois Cussigh, Benoit Thauvin, Philippe Turcry, Michael Dierkens, Damien Rogat, Fib Symposium, Proceedings of the Fib Symposium 2019 Concrete Innovations in Materials Design and Structures, pp. 2014-2021, ISBN:[9782940643004] (2019)
Physical and mechanical studies on binary blended Portland cements containing mordenite-rich tuff and limestone filler, Meriem Meziani, Nordine Leklou, Ouali Amiri, Nasser Chelouah, Matériaux et Techniques, Vol. 107, number 303, issue 3 (2019), doi:10.1051/mattech/2019021
Toward a customized multicriterion tool for product evaluation in the early design phases: the CMDET methodology, Kévin Audoux, Frédéric Segonds, Olivier Kerbrat, Améziane Aoussat, International Journal on Interactive Design and Manufacturing, Vol. 13, issue 3, pp. 981-993 (2019), doi:10.1007/s12008-019-00549-8
Recommendations for infrastructure decision-makers under a changing climate, Emilio Bastidas-Arteaga, Mark G. Stewart, ISBN:[9780128167823], Elsevier (2019), doi:10.1016/B978-0-12-816782-3.00012-7
Hydration, shrinkages and mechanical properties of ultra high performance concrete containing blast furnace slag and algerian dune sand, Abdelfetah Zenati, Mahfoud Tahlaiti, Abdelhafid Khelidj, Mohamed Nadjib Oudjit, International Journal of Engineering Research in Africa, Vol. 42, pp. 86-99 (2019), doi:10.4028/www.scientific.net/JERA.42.86
A Simplified method to assess the damage of a deeply immersed cylinder subjected to underwater explosion, Kevin Brochard, Herve Le Sourne, Guillaume Barras, International Journal of Safety and Security Engineering, Vol. 9, issue 2, pp. 95-108 (2019), doi:10.2495/SAFE-V9-N2-95-108
Distributed optical fiber strain and temperature sensing system performances: Brillouin vs Rayleigh, A. Piccolo, S. Delepine-Lesoille, D. Leduc, Y. Lecieux, Proceedings of SPIE the International Society for Optical Engineering, Vol. 11199, ISBN:[9781510631236], SPIE (2019), doi:10.1117/12.2539843
Experimental and numerical damping behavior analyses of carbon/epoxy laminated plates including viscoelastic material, Rémy Mateu Pastor, Hervé Le Sourne, Patrice Cartraud, Eric Le Gal La Salle, pp. 376-384, CRC Press (2019), doi:10.1201/9780429298875-44
Correction to: Identification of fracture models based on phase field for crack propagation in heterogeneous lattices in a context of non-separated scales (Computational Mechanics, (2019), 63, 5, (1047-1068), 10.1007/s00466-018-1636-z), Nhu Nguyen, J. Yvonnet, J. Réthoré, A. B. Tran, Computational Mechanics, Vol. 63, issue 6, pp. 1351-1351 (2019), doi:10.1007/s00466-018-1660-z
Development of a Method for Assessing Resistance to Mold Growth: Application to Bio-Based Composites Development of a Method for Assessing Resistance to Mold Growth: Application to Bio-based Composites, Marie Viel, Florence Collet, Yann Lecieux, M.L.M. François, Valentin Colson, Christophe Lanos, Atif Hussain, Mike Lawrence, Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, Vol. 29, issue 4, pp. 261-274 (2019), doi:10.18280/rcma.290410
Application of silicon-based camera for measurement of non-homogeneous thermal field on realistic specimen surface, Chao Zhang, Jérémy Marty, Anne Maynadier, Philippe Chaudet, Julien Réthoré, Marie-Christine Baietto, Applied Thermal Engineering, Vol. 149, pp. 1186-1191 (2019), doi:10.1016/j.applthermaleng.2018.12.114
Durability and mechanical properties of optical fiber strain sensing cable for structural health monitoring in harsh environment, Arianna Piccolo, Sylvie Delepine-Lesoille, Etienne Friedrich, Shasime Aziri, Structural Health Monitoring 2019 Enabling Intelligent Life Cycle Health Management for Industry Internet of Things Iiot Proceedings of the 12th International Workshop on Structural Health Monitoring, Vol. 2, pp. 1653-1660, ISBN:[9781605956015], DEStech Publications, Inc. (2019), doi:10.12783/shm2019/32291
Application of Lagrangian Energy Approach to determine the Response of Isotropic Circular Plates subjected to Air and Underwater Blasts, Ye Pyae Sone Oo, Hervé Le Sourne, Olivier Dorival, 7th International Conference on Marine Structures - MARSTRUCT 2019, ISBN:[9780367278090] (2019)
Biocomposites with Asymmetric Stacking for the Study of Hygro-mechanical Couplings, Mael Péron, Amandine Célino, Mickaël Castro, Frédéric Jacquemin, Antoine Le Duigou, Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, Vol. 29, issue 4, pp. 243-252 (2019), doi:10.18280/rcma.290408
Interest of process monitoring and numerical simulation to improve metallic additive manufacturing processes, Alexia Chabot, Jean Yves Hascoët, Matthieu Rauch, Aip Conference Proceedings, Vol. 2113, ISBN:[9780735418479], AIP Publishing (2019), doi:10.1063/1.5112678
Models framework for laser polishing surfaces obtained by milling and additive manufacturing processes, Jean Yves Hascoët, Benoit Rosa, Pascal Mognol, International Journal of Manufacturing Research, Vol. 14, number 394, issue 4 (2019), doi:10.1504/IJMR.2019.104393
Spatial and Temporal Corrosion Degradation Modelling with A Lévy Process based on ILI (In-Line) Inspections, Rafael Amaya-Gómez, Mauricio Sanchez-Silva, Emilio Bastidas-Arteaga, Franck Schoefs, Felipe Munoz, Chemical Engineering Transactions, Vol. 77, pp. 823-828 (2019), doi:10.3303/CET1977138
Increasing the lifetime of wind turbine blades by CBM in a dusty region, Ahmida Rezig, Ahmed Yousfi, Sylvain Fréour, Frédéric Jacquemin, Samuel Branchu, International Journal of Quality Engineering and Technology, Vol. 7, number 361, issue 4 (2019), doi:10.1504/ijqet.2019.105381
Accelerated estimation of fatigue performances of thermoplastic composite materials by self-heating monitoring, Laura Muller, Jean Michel Roche, Antoine Hurmane, Catherine Peyrac, Laurent Gornet, Eccm 2018 18th European Conference on Composite Materials, ISBN:[9781510896932] (2019)
Carbonation of concrete in a climate change context, Mounia Farah, Frédéric Grondin, Menghuan Guo, Ahmed Loukili, Emmanuel Rozière, ISBN:[9781786304865, 9781119671428], Wiley (2019), doi:10.1002/9781119671428.ch3
Evaluation of the elastic properties of randomly-oriented electrospun nanofibrous polyurethane thermoplastic elastomer membranes, M. S. Sukiman, A. Andriyana, B. C. Ang, D. Wong, E. Verron, Constitutive Models for Rubber Xi Proceedings of the 11th European Conference on Constitutive Models for Rubber 2019, pp. 133-137, ISBN:[9780367342586], CRC Press (2019), doi:10.1201/9780429324710-24
Behaviour of bolted composite joints in hygrothermal environments, I. Pivdiablyk, P. Rozycki, L. Gornet, F. Jacquemin, S. Auger, Eccm 2018 18th European Conference on Composite Materials, ISBN:[9781510896932] (2019)
Processing of a laminated composite part by microwave heating, Hermine Tertrais, Chady Ghnatios, Anaïs Barasinski, Francisco Chinesta, Aip Conference Proceedings, Vol. 2139, ISBN:[9780735418820], AIP Publishing (2019), doi:10.1063/1.5121691
French project “perfdub” on performance-based approach: From round-robin tests to new test procedures for durability indicators and accelerated carbonation, French project “Perfdub” on performance-based approach: From round-robin tests to new test procedures for durability indicators and accelerated carbonation, Philippe Turcry, Jonathan Mai-Nhu, Emmanuel Rozière, Benoit Thauvin, François Cussigh, Fib Symposium, Proceedings of the Fib Symposium 2019 Concrete Innovations in Materials Design and Structures, pp. 505-512, ISBN:[9782940643004] (2019)
Impact of climate change on optimal wood pole asset management, A. M. Salman, Y. Li, E. Bastidas-Arteaga, Life Cycle Analysis and Assessment in Civil Engineering Towards an Integrated Vision Proceedings of the 6th International Symposium on Life Cycle Civil Engineering Ialcce 2018, pp. 1727-1734, ISBN:[9781138626331] (2019)
Whispering gallery modes for in-situ measurement of strain tensor, Corentin Guigot, Dominique Leduc, Yann Lecieux, Cyril Lupi, International Conference on Transparent Optical Networks, Vol. 2019-July, ISBN:[9781728127798], IEEE (2019), doi:10.1109/ICTON.2019.8840236
Fifty years of the Journal of Adhesion, Silvio DE BARROS, R Barbastefano, C de Souza, L da Silva, L Sharpe, The Journal of Adhesion, Vol. 95, issue 11, pp. 971-978 (2019), doi:10.1080/00218464.2019.1650472
Rheological behaviour of earthen composite measured by squeeze flow, Philippe Poullain, Fib Symposium, Proceedings of the Fib Symposium 2019 Concrete Innovations in Materials Design and Structures, pp. 438-445, ISBN:[9782940643004] (2019)
Risk Evaluation and Climate Change Adaptation of Civil Engineering Infrastructures and Buildings. Under the coordination of P. Kotronis (several authors), Panagiotis Kotronis, ISBN:ISBN: 978-1-786-30486-5, Wiley (2019), doi:10.1002/9781119671428
A new approach of graded damage modelling, Claude Stolz, Mathematics and Mechanics of Solids, Vol. 24, issue 6, pp. 1922-1934 (2019), doi:10.1177/1081286518810068
Identification of the quasi-static behavior of a woven composite sentitive to the environmental conditions using numercial homogenization, Identification of the quasi-static behavior of a thermoplastic woven composite sensitive to the environmental conditions using numerical homogenization, Identification of the quasi-static behavior of a thermoplastic woven composite sensitive to the environmental conditions using numerical homogenization, Identification of the quasi-static behavior of a woven composite sentitive to the environmental conditions using numercial homogenization, Identification of the quasi-static behavior of a thermoplastic woven composite sensitive to the environmental conditions using numerical homogenization, Identification of the quasi-static behavior of a woven composite sentitive to the environmental conditions using numercial homogenization, Identification of the quasi-static behavior of a woven composite sentitive to the environmental conditions using numercial homogenization, Identification of the quasi-static behavior of a thermoplastic woven composite sensitive to the environmental conditions using numerical homogenization, Identification of the quasi-static behavior of a thermoplastic woven composite sensitive to the environmental conditions using numerical homogenization, Identification of the quasi-static behavior of a woven composite sentitive to the environmental conditions using numercial homogenization, Identification of the quasi-static behavior of a woven composite sentitive to the environmental conditions using numercial homogenization, Identification of the quasi-static behavior of a thermoplastic woven composite sensitive to the environmental conditions using numerical homogenization, Identification of the quasi-static behavior of a woven composite sentitive to the environmental conditions using numercial homogenization, Identification of the quasi-static behavior of a thermoplastic woven composite sensitive to the environmental conditions using numerical homogenization, Identification of the quasi-static behavior of a thermoplastic woven composite sensitive to the environmental conditions using numerical homogenization, Identification of the quasi-static behavior of a woven composite sentitive to the environmental conditions using numercial homogenization, Identification of the quasi-static behavior of a thermoplastic woven composite sensitive to the environmental conditions using numerical homogenization, Identification of the quasi-static behavior of a woven composite sentitive to the environmental conditions using numercial homogenization, Identification of the quasi-static behavior of a woven composite sentitive to the environmental conditions using numercial homogenization, Identification of the quasi-static behavior of a thermoplastic woven composite sensitive to the environmental conditions using numerical homogenization, Identification of the quasi-static behavior of a woven composite sentitive to the environmental conditions using numercial homogenization, Identification of the quasi-static behavior of a thermoplastic woven composite sensitive to the environmental conditions using numerical homogenization, Identification of the quasi-static behavior of a thermoplastic woven composite sensitive to the environmental conditions using numerical homogenization, Identification of the quasi-static behavior of a woven composite sentitive to the environmental conditions using numercial homogenization, Identification of the quasi-static behavior of a thermoplastic woven composite sensitive to the environmental conditions using numerical homogenization, Identification of the quasi-static behavior of a woven composite sentitive to the environmental conditions using numercial homogenization, Identification of the quasi-static behavior of a woven composite sentitive to the environmental conditions using numercial homogenization, Identification of the quasi-static behavior of a thermoplastic woven composite sensitive to the environmental conditions using numerical homogenization, Identification of the quasi-static behavior of a thermoplastic woven composite sensitive to the environmental conditions using numerical homogenization, Identification of the quasi-static behavior of a woven composite sentitive to the environmental conditions using numercial homogenization, Identification of the quasi-static behavior of a thermoplastic woven composite sensitive to the environmental conditions using numerical homogenization, Identification of the quasi-static behavior of a woven composite sensitive to the environmental conditions using numerical homogenization, Patrick Rozycki, Mamadou Adboul Mbacke, Anh Tuan Dau, ICCM22 - 22nd International Conference on Composite Materials 2019, 21ème Journées Nationales sur les Composites, 21ème Journées Nationales sur les Composites, ICCM22 - 22nd International Conference on Composite Materials 2019, 21ème Journées Nationales sur les Composites, ICCM22 - 22nd International Conference on Composite Materials 2019, ICCM22 - 22nd International Conference on Composite Materials 2019, 21ème Journées Nationales sur les Composites, 21ème Journées Nationales sur les Composites, ICCM22 - 22nd International Conference on Composite Materials 2019, ICCM22 - 22nd International Conference on Composite Materials 2019, 21ème Journées Nationales sur les Composites, ICCM22 - 22nd International Conference on Composite Materials 2019, 21ème Journées Nationales sur les Composites, 21ème Journées Nationales sur les Composites, ICCM22 - 22nd International Conference on Composite Materials 2019, 21ème Journées Nationales sur les Composites, ICCM22 - 22nd International Conference on Composite Materials 2019, ICCM22 - 22nd International Conference on Composite Materials 2019, 21ème Journées Nationales sur les Composites, ICCM22 - 22nd International Conference on Composite Materials 2019, 21ème Journées Nationales sur les Composites, 21ème Journées Nationales sur les Composites, ICCM22 - 22nd International Conference on Composite Materials 2019, 21ème Journées Nationales sur les Composites, ICCM22 - 22nd International Conference on Composite Materials 2019, ICCM22 - 22nd International Conference on Composite Materials 2019, 21ème Journées Nationales sur les Composites, 21ème Journées Nationales sur les Composites, ICCM22 - 22nd International Conference on Composite Materials 2019, 21ème Journées Nationales sur les Composites, Iccm International Conferences on Composite Materials (2019)
A method for estimating suffusion susceptibility of a compacted dam core from construction data, Lingran Zhang, Rachel Gelet, Didier Marot, Marc Smith, Jean Marie Konrad, ISBN:[9781786304865, 9781119671428], Wiley (2019), doi:10.1002/9781119671428.ch4
Journal of Materials – Design and Applications: Twenty years of contributions to the materials technology, Silvio DE BARROS, R.G. Barbastefano, C.G. de Souza, Lucas F.M. da Silva, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Vol. 233, issue 4, pp. 541-545 (2019), doi:10.1177/1464420719828607
Centrifuge modelling of a pile group foundation in a multilayered soil under sinusoidal and seismic loadings, J. Pérez-Herreros, F. Cuira, S. Escoffier, P. Kotronis, 17th European Conference on Soil Mechanics and Geotechnical Engineering Ecsmge 2019 Proceedings, ISBN:[9789935943613] (2019), doi:10.32075/17ECSMGE-2019-0206
Hydro-mechanical model for a poro-elastic media subjected to suffusion, A. Kodieh, R. Gelet, N. S. Nguyen, D. Marot, A. Fino, Scour and Erosion Ix Proceedings of the 9th International Conference on Scour and Erosion ICSE 2018, pp. 71-79, ISBN:[9780367074678] (2019)
Earth buildings with local materials: Assessing the variability of properties, Mircea Barnaure, Philippe Poullain, Stéphanie Bonnet, Fib Symposium, Proceedings of the Fib Symposium 2019 Concrete Innovations in Materials Design and Structures, pp. 446-453, ISBN:[9782940643004] (2019)
A database for spatial variability assessment of mechanical parameters of ozigo specie under long-term bending tests in gabon, E. Bastidas-Arteaga, V. Nsouami, R. Moutou Pitti, N. Manfoumbi, Advances in Engineering Materials Structures and Systems Innovations Mechanics and Applications Proceedings of the 7th International Conference on Structural Engineering Mechanics and Computation 2019, pp. 1762-1767, ISBN:[9781138386969], CRC Press (2019), doi:10.1201/9780429426506-305
Assessing Suffusion Susceptibility of Soils by Using Construction Data: Application to a Compacted Till Dam Core, Lingran Zhang, Rachel Gelet, Didier Marot, Marc Smith, Jean Marie Konrad, Internal Erosion in Earthdams, Dikes and Levees, Vol. 17, pp. 313-324, ISBN:978-3-319-99422-2, Springer International Publishing (2019), doi:10.1007/978-3-319-99423-9_28
A review of the biofouling parameters influencing the drag force coefficient of offshore structures, A. Bakhtiari, F. Schoefs, H. Ameryoun, Advances in Renewable Energies Offshore Proceedings of the 3rd International Conference on Renewable Energies Offshore Renew 2018, pp. 659-666, ISBN:[9781138585355] (2019)
Preface, Emilio Bastidas-Arteaga, Mark G. Stewar, ISBN:[9780128167823], [9781786304865, 9781119671428], [9780128168400, 9780128167823], Elsevier, , Elsevier (2019), doi:10.1016/B978-0-12-816782-3.09994-0, , 10.1016/B978-0-12-816782-3.09994-0
ROC-based performance analysis and interpretation of image-based damage diagnostic tools for underwater inspections, M. O’Byrne, V. Pakrashi, F. Schoefs, B. Ghosh, Life Cycle Analysis and Assessment in Civil Engineering Towards an Integrated Vision Proceedings of the 6th International Symposium on Life Cycle Civil Engineering Ialcce 2018, pp. 1679-1686, ISBN:[9781138626331] (2019)
Development of a new constitutive model for thermoplastic copolyester materials, Pierre Robard, Laurent Gornet, Patrick Rozycki, Gilles Marckmann, Jean-Charles Guldner, Frédéric Maitay, 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), pp. 305-310, ISBN:[9780367342586], CRC Press (2019), doi:10.1201/9780429324710-54
A tool to evaluate effectiveness of climate change adaptation measures for houses subjected to coastal flood risks, A. Creach, M. Gonzva, E. Bastidas-Arteaga, S. Pardo, D. Mercier, Life Cycle Analysis and Assessment in Civil Engineering Towards an Integrated Vision Proceedings of the 6th International Symposium on Life Cycle Civil Engineering Ialcce 2018, pp. 1743-1750, ISBN:[9781138626331] (2019)
Impact of the aggregate size and of the cement type on concrete gas permeability measured under loading, Marta Choinska, Stéphanie Bonnet, Hayder Al-Khazraji, Aurélie Fabien, Abdelhafid Khelidj, Proceedings of the Fib Symposium 2019 Concrete Innovations in Materials Design and Structures, pp. 2160-2166, ISBN:[9782940643004] (2019)
Using step-by-step Bayesian updating to better estimate the reinforcement loss due to corrosion in reinforced concrete structures, F. Schoefs, B. Heitner, T. Yalamas, G. Causse, E. J. O’Brien, Life Cycle Analysis and Assessment in Civil Engineering Towards an Integrated Vision Proceedings of the 6th International Symposium on Life Cycle Civil Engineering Ialcce 2018, pp. 1977-1982, ISBN:[9781138626331] (2019)
Modelling the coupled transport carbonation-chloride in concrete by mutltiscale approach, Mohamad Achour, Ouali Amiri, Francois Bignonnet, Emmanuel Rozière, Proceedings of the Fib Symposium 2019 Concrete Innovations in Materials Design and Structures, pp. 2183-2190, ISBN:[9782940643004] (2019)
Corrigendum to ‘Convergence of sensitivity analysis methods for evaluating combined influences of model inputs’[RESS 189 (2019) 109–122](S0951832018305763)(10.1016/j.ress.2019.03.050), Majdi Awad, Tristan Senga Kiesse, Zainab Assaghir, Anne Ventura, Reliability Engineering and System Safety, Vol. 191, number 106619 (2019), doi:10.1016/j.ress.2019.106619
Environmental effects on bolted composite joints subjected to preload, Ivanna Pivdiablyk, Patrick Rozycki, Laurent Gornet, Frédéric Jacquemin, Stéphane Auger, ICCM22 - 22nd International Conference on Composite Materials 2019 (2019)
A review of the biofouling parameters influencing the drag force coefficient of offshore structures, A. Bakhtiari, F. Schoefs, H. Ameryoun, Vol. 2019, pp. 659-666 (2019)
Hydro-mechanical modeling of internal erosion in dike, Jie Yang, Farid Laouafa, Zhen-Yu Yin, Pierre-Yves Hicher, Proceedings of the 53rd US Rock Mechanics / Geomechanics Symposium (2019)
System-level maintenance optimization for power distribution systems subjected to hurricanes, Abdullahi M. Salman, Yue Li Professor, Emilio Bastidas-Arteaga, 13th International Conference on Applications of Statistics and Probability in Civil Engineering Icasp 2019 (2019)
Statistical subspace based damage localization on Saint-Nazaire Bridge mock-up, Md Delwar Hossain Bhuyan, Michael Döhler, Yann Lecieux, Cyril Lupi, Jean-Christophe Thomas, Franck Schoefs, Falk Hille, Laurent Mevel, IOMAC 2019 - 8th International Operational Modal Analysis Conference, pp. 1-9, ISBN:[9788409049004] (2019)
A numerical model for coupling hygro-mechanical phenomena in composite materials, Shahram Khazaie, Mamadou A. Mbacké, Sylvain Fréour, Frederic Jacquemin, Iccm International Conferences on Composite Materials, Vol. 2019-August (2019)
A macroelement for dynamic soil-structure interaction analysis of pile-group foundations, J. Pérez-Herreros, F. Cuira, P. Kotronis, S. Escoffier, Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions Proceedings of the 7th International Conference on Earthquake Geotechnical Engineering 2019, pp. 4267-4274, ISBN:[9780367143282] (2019)
Experimental investigation of emissivity influence to obtain thermal field by near infrared thermography, C. Zhang, J. Marty, A. Maynadier, P. Chaudet, J. Réthoré, M. C. Baietto, Conference Proceedings of the Society for Experimental Mechanics Series, pp. 35-37, ISBN:[9783319950730], Springer International Publishing (2019), doi:10.1007/978-3-319-95074-7_6
Dynamic crack growth in elastomers: experimental energetic analysis, Thomas Corre, Michel Coret, Erwan Verron, Bruno Leblé, pp. 512-515, CRC Press (2019)
New method for assessing endogenous microcracking in cementitious matrix in early age, N. Leklou, P. Mounanga, Revista Romana De Materiale Romanian Journal of Materials, Vol. 49, pp. 68-72 (2019)
Effects of aggregate size and of cement type on concrete mechanical behaviour and on gas permeability evolution with loading, Marta Choinska, Stéphanie Bonnet, Aurélie Fabien, Hayder Al-Khazraji, Abdelhafid Khelidj, Brittle Matrix Composites 12 Proceedings of the 12th International Symposium on Brittle Matrix Composites BMC 2019, pp. 174-181, ISBN:[9788365550200] (2019)
Influence of defects size on the fatigue properties of an industrial EPDM, Thomas Balutch, Bertrand Huneau, Yann Marco, Pierre Charrier, Clément Champy, 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), Constitutive Models for Rubber Xi Proceedings of the 11th European Conference on Constitutive Models for Rubber 2019, ISBN:[9780367342586], CRC Press (2019), doi:10.1201/9780429324710-62
Study of the behavior of offshore wind turbine monopiles under monotonic and cyclic lateral loading, Sanae Ahayan, Panagiotis Kotronis, Zhen Yu Yin, Benjamin Cerfontaine, Frédéric Collin, ISBN:[9781786304865, 9781119671428], Wiley (2019), doi:10.1002/9781119671428.ch2
Composites are deeply rooted in Nantes, Christophe Binetruy, JEC Composites Magazine, issue 130, pp. 12-13 (2019)
How to perform an efficient learning process for a combined POD and PGD soil urban thermal model?, Marie Hélène Azam, Sihem Guernouti, Marjorie Musy, Philippe Poullain, Building Simulation Conference Proceedings, Vol. 5, pp. 3155-3162, ISBN:[9781713809418] (2019)
Non-intrusive Sparse Subspace Learning for Parametrized Problems, Domenico Borzacchiello, José V. Aguado, Francisco Chinesta, Archives of Computational Methods in Engineering, Vol. 26, issue 2, pp. 303-326 (2019), doi:10.1007/s11831-017-9241-4
Modelling the mechanical strength development of treated fine sediments: a statistical approach, Ishak Moghrabi, Harifidy Ranaivomanana, Fateh Bendahmane, Ouali Amiri, Daniel Levacher, Environmental Technology United Kingdom, Vol. 40, issue 14, pp. 1890-1909 (2019), doi:10.1080/09593330.2018.1432697
Lagrangian Mechanics: An Advanced Analytical Approach, Anh Le Van, Rabah Bouzidi, Wiley (2019), doi:10.1002/9781119629702
Fatigue damage and failure analysis of honeycomb sandwich, F. Alila, P. Casari, Procedia Structural Integrity, Vol. 19, pp. 101-105 (2019), doi:10.1016/j.prostr.2019.12.012
Probabilistic analysis of an offshore monopile foundation taking into account the soil spatial variability, Abdul-Kader El Haj, Abdul-Hamid Soubra, Jamal Fajoui, Computers and Geotechnics, Vol. 106, pp. 205-216 (2019), doi:10.1016/j.compgeo.2018.10.011
Updating probabilities of bridge reinforcement corrosion using health monitoring data, Barbara Heitner, Eugene J. OBrien, Thierry Yalamas, Franck Schoefs, Cathal Leahy, Rodrigue Décatoire, Engineering Structures, Vol. 190, issue BE3, pp. 41-51 (2019), doi:10.1016/j.engstruct.2019.03.103
Poisson's ratio and volume change accompanying deformation of randomly oriented electrospun nanofibrous membranes, Dannee Wong, Andri Andriyana, Bee Chin Ang, Jacky Jia Li Lee, Erwan Verron, Muthia Elma, Plastics, Rubber and Composites, Vol. 48, issue 10, pp. 456-465 (2019), doi:10.1080/14658011.2019.1660838
Epinephrine infiltration of adipose tissue impacts mcf7 breast cancer cells and total lipid content, Pierre Avril, Luciano Vidal, Sophie Barille-Nion, Louis Romée Le Nail, Françoise Redini, Pierre Layrolle, Michelle Pinault, Stéphane Chevalier, Pierre Perrot, Valérie Trichet, International Journal of Molecular Sciences, Vol. 20, number 5626, issue 22 (2019), doi:10.3390/ijms20225626
Identification Bayésienne de l'effet de chargement statique et cyclique sur le mécanisme de pénétration des ions chlorure dans le béton, Henriette Imounga, Thanh-Binh Tran, Emilio Bastidas-Arteaga, Serge Ekomy Ango, Rostand Moutou Pitti, Xiao-Hui Wang, 24e Congrès Français de Mécanique (2019)
Mécanique de Lagrange, Anh Le Van, Rabah Bouzidi, Wiley (2019)
Vacuum thermocompressed biocomposites for marine application, Victor Popineau, Amandine Célino, Christophe Baley, Antoine Le Duigou, 21ème Journées Nationales sur les Composites (2019)
Transfert de chaleur dans un procédé de soudage de films polymères, Queen Tannous, Yves Bereaux, Pierre Mousseau, Anaïs Barasinski, Rémi Deterre, Guillaume Racineux, Julien Launay, Yannick Madec, Clément Fourmaux, Jordan Champion, 27ème Congrès Français de Thermique (2019)
Mechanical Characterization of a Composite Sandwich Core Under Shear Stress Based on a Torsion Test, Karim Mharsi, Pascal Casari, Amira Sellami, Jamal Fajoui, Mohamed Kchaou, International Conference on Advances in Mechanical Engineering and Mechanics (ICAMEM 2019), pp. 299-305, Springer International Publishing (2019), doi:10.1007/978-3-030-52071-7_41
Bayesian model selection for sand with generalization ability evaluation, Yin-Fu Jin, Zhen-Yu Yin, Wan-Huan Zhou, Jian-Fu Shao, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 43, issue 14, pp. 2305-2327 (2019), doi:10.1002/nag.2979
Films piézoélectriques flexibles pour la récupération d’énergie, Raynald Seveno, Thibault Dufay, Benoit Guiffard, Julien Le Scornec, Mohammed El Gibari, Sabrina Carpy, Jean-Christophe Thomas, Pierre-Jean Cottinet, Mickaël Lallart, Lionel Petit, Vincent Le Cam, COFMER'03 - Colloque franco-maghrébin sur les énergies renouvelables (2019)
Evolution of mechanical and microstructural properties in regenerating rat calvaria bones through synchrotron X-ray scattering methods., Baptiste Girault, Ameni Zaouali, David Gloaguen, Valérie Geoffroy, Pierre-Antoine Dubos, Marie José Moya, Matthias Schwartzkopf, Tim Snow, Himadri S. Gupta, Olga Shebanova, Konrad Schneider, Baobao Chang, Pierre Tournier, A Pare, KI/KTH Workshop: Surface and Interfaces of Biomedical Surfaces (2019)
Utilisation d'un méta-modèle pour l'identification paramétrique : application à la mesure de résistivité électrique, Priou Johann, Yann Lecieux, Mathilde Chevreuil, 14ème Colloque National en Calcul de Structures (CSMA 2019) (2019)
Invariant integrals and asymptotic fields of a planar crack, Claude Stolz, Fracture in solid mechanics :mathematical and physical aspects, Scientific Symposium in Honor of J-B. Leblond (2019)
Analyse de la méthode G−θ en 3D : cas des fissures planes à front droit, Alexandre Martin, Mathieu Le Cren, Claude Stolz, 14ème Colloque National en Calcul de Structures (CSMA 2019) (2019)
A stabilized mixed formulation using the proper generalized decomposition for fluid problems, Chady Ghnatios, Elie Hachem, Computer Methods in Applied Mechanics and Engineering, Vol. 346, issue 4, pp. 769-787 (2019), doi:10.1016/j.cma.2018.09.030
Liaisons convexes et endommagement à variation graduée, Nunziante Valoroso, Claude Stolz, CSMA 2019, 14ème Colloque National en Calcul des Structures (2019)
A thin layer model based on polynomial expansion for coated bodies in contact, A thin layer approach model based on polynomial expansion for coated bodies in contact, Tauno Tiirats, Nicolas Chevaugeon, Nicolas Moes, Claude Stolz, Nabil Marouf, ICCCM 2019 - VI. International Conference on Computational Contact Mechanics, VIth International Conference on Computational Contact Mechanics ICCCM (2019)
, Rohit Trivedi, Hervé Le Sourne, Simon Paroissien, S. Branchereau, C. Lucas, pp. -, CRC Press (2019), doi:10.1201/9781003002420
Constitutive Models for Rubber XI, Bertrand Huneau, Jean-Benoit Le Cam, Yann Marco, Erwan Verron, 11th European Conference on Constitutive Models for Rubber (ECCMR 2019), CRC Press (2019), doi:10.1201/9780429324710
Micromechanical modelling of damage induced by delayed ettringite formation, Abdo Yammine, François Bignonnet, Nordine Leklou, Marta Choinska, Teresa Stryszewska, Proceedings of the FraMCoS-X-10-10th International Conference on Fracture Mechanics of Concrete and Concrete Structures (2019), doi:10.21012/fc10.233150
Comparative Study of Methods for the Quantification of Fiber Orientations of Composite Reinforcements, Elena Syerko, Laura Oter, Ajinkya Pawar, Christophe Binetruy, Suresh G. Advani, Benedikt Eck, 21ème Journées Nationales sur les Composites (2019)
Investigation of α-Ti plastic anisotropy under thermomechanical loadings: temperature influence on deformation mechanisms, K. Agbovi, Jamal Fajoui, Baptiste Girault, David Gloaguen, S. Kabra, J. Kelleher, W. Kockelmann, MATEC Web of Conferences, The 14th World Conference on Titanium, Vol. 321, pp. 07004 (2019), doi:10.1051/matecconf/202032107004
Efficient simulation from 3D tomographic images of heterogeneous materials, Xiaodong Liu, Julien Réthoré, Marie-Christine Baietto, Phillippe Sainsot, Ton Lubrecht, 14ème Colloque National en Calcul de Structures (CSMA 2019) (2019)
Vibrational properties of quasi-periodic beam structures, Arthur Glacet, Anne Tanguy, Julien Réthoré, Journal of Sound and Vibration, Vol. 442, issue 4, pp. 624-644 (2019), doi:10.1016/j.jsv.2018.10.045
Review on the modelling methods for the frost action characterization in cementitious materials at different scales, Frédéric Grondin, AIMS Materials Science, Vol. 6, issue 6, pp. 884-899 (2019), doi:10.3934/matersci.2019.6.884
Improved Kriging-Based Approach for the Probabilistic Analysis of a Large Diameter Monopile in a Spatially Varying Soil, Abdul Kader El Haj, Abdul-Hamid Soubra, Proceedings from the 7th International Symposium On Geotechnical Safety And Risk (ISGSR 2019) (2019), doi:10.3850/978-981-11-2725-0-IS9-4-cd
High performance simulation of short fiber suspensions formanufacturing processes, Nesrine Aissa, Luisa Alexandra Rocha da Silva, Emmanuelle Abisset-Chavanne, Hugues Digonnet, 21ème Journées Nationales sur les Composites (2019)
Modélisation numérique de l'adhésion inter-pli dans le formage de composites thermoplastiques, Paris Dilip Mulye, Lionel Morancay, Christophe Binetruy, Adrien Leygue, Sébastien Comas-Cardona, Pierre Pichon, Damien Guillon, 21ème Journées Nationales sur les Composites (2019)
Mesoscale numerical study of aggregate size in concrete by discrete element method, Ran Zhu, Ahmed Loukili, Syed Yasir Alam, 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures, IA-FraMCoS (2019), doi:10.21012/FC10.235426
Elaboration of hybrid bio-composites with thermoplastic matrix: optimal formulation and modeling of the dynamic behavior for an automotive structural application parts, Wassim Guerfala, Patrick Rozycki, Christophe Binetruy, 21ème Journées Nationales sur les Composites (2019)
Prise en compte de l’erreur de discrétisation pour l’estimation de probabilité de défaillance par surface de réponse, Ludovic Mell, Valentine Rey, Franck Schoefs, 24 ème Congrès Français de Mécanique (2019)
A nonintrusive distributed reduced‐order modeling framework for nonlinear structural mechanics—Application to elastoviscoplastic computations, Fabien Casenave, Nissrine Akkari, Felipe Bordeu, Christian Rey, David Ryckelynck, International Journal for Numerical Methods in Engineering, Vol. 121, issue 1, pp. 32-53 (2019), doi:10.1002/nme.6187
Formage magnétique de raidisseurs pour composants aéronautiques, C Sow, G. Bazin, Thomas Heuzé, Guillaume Racineux, 24 ème Congrès Français de Mécanique (2019)
Simulation of the diffusion of water in a bi-material assembly: what condition at the interface?, Julie Cocaud, Amandine Célino, Sylvain Fréour, Frédéric Jacquemin, Patrick de Luca, 21ème Journées Nationales sur les Composites (2019)
A model order reduction approach to create patient-specific mechanical models of human liver in computational medicine applications., Nathan Lauzeral, Domenico Borzacchiello, Michael Kugler, Yves Rémond, Daniel George, Alexandre Hostettler, Francisco Chinesta, Computer Methods and Programs in Biomedicine, Vol. 170, issue 2, pp. 95-106 (2019), doi:10.1016/j.cmpb.2019.01.003
Passive infrared thermography measurement of the strain-rate dependancy of transverse craking evolution in cross-ply laminates, Fabien Coussa, Julien Berthe, Matthieu Ragonet, Adrien Vinel, JNC21 (2019)
A Quick Overview on Geopolymer Chemistry and General Properties, Lais Alves, Arissa Nogueira, João Dos Santos, Silvio DE BARROS, Research & Development in Material Science, Vol. 12, issue 2 (2019), doi:10.31031/rdms.2019.12.000781
Characterization of Bioconcrete and the Properties for Self-Healing, Lais Alves, Leniza Alves, Murilo Mello, Silvio Barros, Proceedings, Vol. 11, number 4 (2019), doi:10.3390/proceedings2019038004
Etude de la transformation allotropique du cobalt polycristallin : Influence du chargement mécanique, du cycle thermique et de la microstructure, Nadjib Iskounen, Pierre-Antoine Dubos, Jamal Fajoui, Michel Coret, Marie José Moya, Nicolas Barrier, Eric Hug, Baptiste Girault, David Gloaguen, Journée de la section Ouest de la SF2M 2019 (2019)
Hydro-mechanical modeling of granular soils considering internal erosion, Zhen-Yu Yin, Jie Yang, Farid Laouafa, Pierre-Yves Hicher, Abstract book of the 1st International symposium COGGUS2 (2019)
A coupled hydromechanical modelling of internal erosion around shield tunnel, Jie Yang, Zhen-Yu Yin, Farid Laouafa, Pierre-Yves Hicher, Abstract book of the 1st International symposium COGGUS2 (2019)
Composite part curing in industrial Micro-wave oven: simulation methodology, Yann Duplessis Kergomard, Erik Abenius, Hermine Tertrais, Anaïs Barasinski, Francisco Chinesta, Laurent Dufort, 21ème Journées Nationales sur les Composites (2019)
Progressive damage and quasibrittle solids, Nunziante Valoroso, Claude Stolz, AIMETA XXIV Congresso asosiazione italina de Meccanica Teoria e applicata, pp. 408, Springer (2019), doi:10.1007/978-3-030-41057-5
Évaluation de l'approche data-driven pour les grandes transformations élastiques, Auriane Platzer, Adrien Leygue, Laurent Stainier, 14ème Colloque National en Calcul de Structures (CSMA 2019) (2019)
Simulation Data-Driven à partir d'une base de donnée expérimentale. Test préliminaire sur des données synthétiques, Adrien Leygue, Laurent Stainier, Michael Ortiz, 14ème Colloque National en Calcul de Structures (CSMA 2019) (2019)
Estimation de champs de contraintes en pointe de fissure par une approche Data-Driven, Raphaël Langlois, Julien Réthoré, Michel Coret, 14ème Colloque National en Calcul de Structures (CSMA 2019) (2019)
Intégrale J et champs asymptotiques le long d'une fissure plane, Claude Stolz, Mathieu Le Cren, Alexandre Martin, CSMA 2019, 14ème Colloque National en Calcul des Structures (2019)
A single-objective EPR based model for creep index of soft clays considering L-2 regularization, Yin-Fu Jin, Zhen-Yu Yin, Wan-Huan Zhou, Jian-Hua Yin, Jian-Fu Shao, Engineering Geology, Vol. 248, pp. 242-255 (2019), doi:10.1016/j.enggeo.2018.12.006
Simulation of the failure of quasi-brittle specimen with defects using the TLS damage model: Scale effect analysis, Jihed Zghal, Nicolas Moes, Dominique Leguillon, Claude Stolz, ICMM6, pp. 1-1 (2019)
Probabilistic analysis of strip footings resting on spatially varying soils using kriging metamodeling and importance sampling, Abdul‐hamid Soubra, Tamara Al-Bittar, Jawad Thajeel, Ashraf Ahmed, Computers and Geotechnics, Vol. 114, number 103107, issue 5 (2019), doi:10.1016/j.compgeo.2019.103107
Réduction de modèle pour l'évaluation des contraintes internes et déformations résiduelles des pièces issues de fabrication additive métallique, Brice Bognet, 14ème Colloque National en Calcul de Structures (CSMA 2019) (2019)
Failure risk of recycled aggregates concrete, Frédéric Grondin, Menghuan Guo, Emmanuel Rozière, Ahmed Loukili, MATEC Web of Conferences, International Conference of Engineering Risk (INCER 2019), Vol. 281, pp. 01017 (2019), doi:10.1051/matecconf/201928101017
New Process for High Rate Production of Composite Parts based on Thermoplastics (INCREASE Project), Alexandre Giroud, Pierre Jacquet, V. Charreton, J. Maupetit, Gilles Orange, Xavier Brochet, Jerôme Loureaux, Philippe Monier, Pascal Rumeau, Sébastien Comas-Cardona, Alexandre Hautefeuille, Julien Colmars, Q. Steer, 21ème Journées Nationales sur les Composites (2019)
Mesure et prédiction des déformations et contraintes résiduelles lors du refroidissement d’un stratifié composite thermoplastique, Mael Péron, Frédéric Jacquemin, Pascal Casari, Gilles Orange, J-L. Bailleul, Nicolas Boyard, Comptes Rendus des JNC 21 – Bordeaux INP – 1-3 juillet 2019 (2019)
Microcracking of Non-Crimp Fabric composites under hygrothermal aging, Hicham Bezzou, Mael Péron, Pascal Casari, Frédéric Jacquemin, 21e Journées Nationales sur les Composites (2019)
Measurement and prediction of the residual strains and stresses during the cooling of a thermoplastic composite laminate, Mael Péron, Frédéric Jacquemin, Pascal Casari, Gilles Orange, Jean-Luc Bailleul, Nicolas Boyard, JNC 21 (2019)
Determination of the local water content by measuring the refractive index of a polymeric material with a Fresnel sensor, Romain Grangeat, Marion Girard, Cyril Lupi, Dominique Leduc, Frédéric Jacquemin, 21ème Journées Nationales sur les Composites (2019)
Chapter 11 - Delayed mechanical properties, Frederic Grondin, Caroline de Sa, Thierry Sedran, Franck Cassagnabère, Farid Benboudjema, Ahmed Zakarya Bendimerad, Menghuan Guo, Ahmed Loukili, Pierre Nicot, Emmanuel Rozière, Bernard Fouré, pp. pp 187-212, CRC Press (2019), doi:10.1201/9781351052825-16
Tensile strength of concrete at early-age: New experimental procedure and influence of mix-design parameters, Emmanuel Rozière, Ahmed Loukili, 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures, IA-FraMCoS (2019), doi:10.21012/FC10.233050
In situ mechanical behavior of bone graft for bone regenerative engineering via synchrotron X-ray micro-diffraction., Ameni Zaouali, David Gloaguen, Valérie Geoffroy, Pierre-Antoine Dubos, Marie José Moya, Matthias Schwartzkopf, Tim Snow, Himadri Gupta, Olga Shebanova, Konrad Schneider, Baobao Chang, Baptiste Girault, 8th International Congress on Design and Modeling of Mechanical Systems (2019)
Identification de lois de fluage par FEMU sur une ROI sans bord libre, Thomas Jailin, Nicolas Tardif, Jean Desquines, Michel Coret, Marie-Christine Baietto, Philippe Chaudet, Vincent Georgenthum, 14ème Colloque National en Calcul de Structures (CSMA 2019) (2019)
Couplage fluide structure membranaire pressurisée pour l’étude de l’amerrissage forcé des hélicoptères, Clément Blanchard, Anh Le Van, Séverin Halbout, Nicolas Couty, Yoann Jus, 24e Congrès Français de Mécanique (2019)
Méthode G−θ en 3D : interpolation des facteurs d'intensité de contraintes., Alexandre Martin, Matthieu Le Cren, Claude Stolz, 14ème Colloque National en Calcul de Structures (CSMA 2019) (2019)
Robustesse de l'algorithme d'identification Data-Driven vis-à-vis de données parcellaires, Marie Dalemat, Michel Coret, Adrien Leygue, Erwan Verron, 14ème Colloque National en Calcul de Structures (CSMA 2019) (2019)
Development of Analytical Formulae to determine the Response of Submerged Composite Plates subjected to Underwater Explosion, Ye Pyae Sone Oo, Hervé Le Sourne, Olivier Dorival, The 14th International Symposium on Practical Design of Ships and Other Floating Structures - PRADS 2019 (2019)
Flexible PZT thin films prepared by Chemical Solution Deposition process, Raynald Seveno, Julien Le Scornec, Benoit Guiffard, Vincent Le Cam, Mohammed El Gibari, Jean-Christophe Thomas, Pierre-Jean Cottinet, Mickael Lallart, Lionel Petit, International Workshop on Piezoelectric Materials and Applications in Actuators 2019 (IWPMA2019) (2019)
Etude in situ par rayonnement synchrotron de la restauration des propriétés mécaniques des tissus osseux lors du processus de régénération., Ameni Zaouali, David Gloaguen, Valérie Geoffroy, Pierre-Antoine Dubos, Marie José Moya, Matthias Schwartzkopf, Tim Snow, Himadri S. Gupta, Olga Shebanova, Konrad Schneider, Baobao Chang, Baptiste Girault, Journée de la section Ouest de la SF2M 2019 (2019)
Mechanical performance of a carbon/PPS composite under hygro-thermal environment, Ivanna Pivdiablyk, Patrick Rozycki, Laurent Gornet, Frédéric Jacquemin, Stéphane Auger, 21ème Journées Nationales sur les Composites (2019)
Data-Driven Identification of Composites Permeability from Flow Patterns, Elie Eid, Adrien Leygue, Christophe Binetruy, Suresh Advani, 14ème Colloque National en Calcul de Structures (CSMA 2019) (2019)
Experimental study and modeling of flow-induced deformations of continuous prepregs during consolidation, Alexandre Hautefeuille, Sébastien Comas-Cardona, 21ème Journées Nationales sur les Composites (2019)
Structural health monitoring by combining machine learning and dimensionality reduction techniques, Giacomo Quaranta, Elena Lopez, Emmanuelle Abisset-Chavanne, Jean Louis Duval, Antonio Huerta, Francisco Chinesta, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 35, issue 1 (2019), doi:10.23967/j.rimni.2018.12.001
Effect of moisture absorption on the multi-scale behavior of flax fibers reinforced composites, Ziad El Hachem, Amandine Célino, Georges Challita, Sylvain Fréour, 21ème Journées Nationales sur les Composites (2019)
Modélisation multi-échelle non-linéaire de structures élancées avec constituants hélicoïdaux, Fabien Ménard, Patrice Cartraud, 14ème Colloque National en Calcul de Structures (CSMA 2019) (2019)
Numerical analysis of viscoelastic sandwich structures by a fractional derivative model, Alina Krasnobrizha, Emmanuel Valot, Michele d'Ottavio, Lorenzo Dozio, Comptes Rendus des JNC 21 (2019)
Coupling fluid and pressurized membrane structure for the study of helicopter ditching, Clément Blanchard, Anh Le Van, Séverin Halbout, Nicolas Couty, Yoann Jus, VIII International Conference on Computational Methods for Coupled Problems in Science and Engineering (2019)
Recycled concrete at early age, Emmanuel Rozière, Ahmed Zakarya Bendimerad, Ahmed Loukili, Jean-Claude Souche, Marie Salgues, Eric Garcia-Diaz, Philippe Devillers, pp. 127-141, CRC Press (2019), doi:10.1201/9781351052825-12
Spatiotemporal analysis for detection of pre-symptomatic shape changes in neurodegenerative diseases: Initial application to the GENFI cohort, Claire Cury, Stanley Durrleman, David Cash, Marco Lorenzi, Jennifer Nicholas, Martina Bocchetta, John van Swieten, Barbara Borroni, Daniela Galimberti, Mario Masellis, Maria Carmela Tartaglia, James Rowe, Caroline Graff, Fabrizio Tagliavini, Giovanni Frisoni, Robert Laforce, Elizabeth Finger, Alexandre de Mendonça, Sandro Sorbi, Sébastien Ourselin, Jonathan Rohrer, Marc Modat, Christin Andersson, Silvana Archetti, Andrea Arighi, Luisa Benussi, Sandra Black, Maura Cosseddu, Marie Fallstrm, Carlos Ferreira, Chiara Fenoglio, Nick Fox, Morris Freedman, Giorgio Fumagalli, Stefano Gazzina, Robert Ghidoni, Marina Grisoli, Vesna Jelic, Lize Jiskoot, Ron Keren, Gemma Lombardi, Carolina Maruta, Lieke Meeter, Rick van Minkelen, Benedetta Nacmias, Linn Ijerstedt, Alessandro Padovani, Jessica Panman, Michela Pievani, Cristina Polito, Enrico Premi, Sara Prioni, Rosa Rademakers, Veronica Redaelli, Ekaterina Rogaeva, Giacomina Rossi, Martin Rossor, Elio Scarpini, David Tang-Wai, Hakan Thonberg, Pietro Tiraboschi, Ana Verdelho, Jason Warren, NeuroImage, Vol. 188, issue 2, pp. 282-290 (2019), doi:10.1016/j.neuroimage.2018.11.063
3D real time and in situ analysis of (de)consolidation mechanisms in fibre-reinforced thermoplastic composites during thermostamping, Yassine Lakroune, Laurent Orgéas, Pierre Dumont, Florian Martoïa, Sabine Rolland Du Roscoat, Frédéric Jacquemin, Pascal Casari, Olivier Guiraud, 21ème Journées Nationales sur les Composites (2019)
Experimental investigation of the mechanical behaviour of soft carbonate rock/grout interfaces for the design of offshore wind turbines, Eleni Stavropoulou, Christophe Dano, Marc Boulon, E3S Web of Conferences, Vol. 92, number 13006, issue 3 (2019), doi:10.1051/e3sconf/20199213006
Phase transformation during tensile testing in polycrystalline pure cobalt., Nadjib Iskounen, Pierre-Antoine Dubos, Jamal Fajoui, Michel Coret, Marie José Moya, Nicolas Barrier, Eric Hug, Baptiste Girault, David Gloaguen, EUROMAT 2019, European Congress and Exhibition on Advanced Materials and Processes (2019)
Composite laminate with embedded electric cables submitted to low energy impact, Thibault Vogel, Jean-Christophe Walrick, Pascal Casari, 24ème Congrès Français de Mécanique (2019)
Le schéma de Lax-Wendroff pour les solides élastoplastiques, Thomas Heuzé, 14ème Colloque National en Calcul de Structures (CSMA 2019) (2019)
Durability of composite sandwich materials: evolution of mechanical properties at very high temperatures, Vincent Legrand, Georgio Rizk, Khaled Khalil, Pascal Casari, Frédéric Jacquemin, 21ème Journées Nationales sur les Composites (2019)
Evolution spatiotemporelle des caractéristiques mécaniques de bois d'Ozigo en climat extérieur non abrité, Valérie Nsouami, Nicaise Manfoumbi, Emilio Bastidas-Arteaga, Rostand Moutou Pitti, 24e Congrès Français de Mécanique (2019)
Chloride ingress Spatial Variability assessment : towards accurate maintenance policies optimization, Romain Clerc, Franck Schoefs, Mestapha Oumouni, Othmen Ines, Stéphanie Bonnet, HeaMES 2019 (2019)
Investigation par diffraction des neutrons du gradient de contraintes résiduelles dans des aciers élaborés par fusion laser sur lit de poudre, David Gloaguen, Baptiste Girault, Bruno Courant, Pierre-Antoine Dubos, Marie-José Moya, Maxime Limousin, Daniel Marcos, Saurabh Kabra, Winfried Kockelmann, Joana Rebelo- Kornmeier, Journées Annuelles de la Société Française de Métallurgie et de Matériaux (JA SF2M 2019) (2019)
Dilative behavior of kaolinite under drained creep condition, Dan Zhao, Mahdia Hattab, Zhen-Yu Yin, Pierre-Yves Hicher, Acta Geotechnica, Vol. 14, issue 4, pp. 1003-1019 (2019), doi:10.1007/s11440-018-0686-x
Identification of the quasi-static behavior of a thermoplastic woven composite sensitive to the environmental conditions using numerical homogenization, Identification of the quasi-static behavior of a woven composite sentitive to the environmental conditions using numercial homogenization, Identification of the quasi-static behavior of a woven composite sentitive to the environmental conditions using numercial homogenization, Identification of the quasi-static behavior of a thermoplastic woven composite sensitive to the environmental conditions using numerical homogenization, Patrick Rozycki, Anh Tuan Dau, Mamadou Adboul Mbacke, 21ème Journées Nationales sur les Composites, ICCM22 - 22nd International Conference on Composite Materials 2019, ICCM22 - 22nd International Conference on Composite Materials 2019, 21ème Journées Nationales sur les Composites (2019)
Cobalt phase analysis and internal strain under thermomechanical loading: allotropic transformation study, Pierre-Antoine Dubos (2019), doi:10.5286/ISIS.E.RB1910046
Identification of the quasi-static behavior of a thermoplastic woven composite sensitive to the environmental conditions using numerical homogenization, Identification of the quasi-static behavior of a woven composite sentitive to the environmental conditions using numercial homogenization, Patrick Rozycki, Anh Tuan Dau, Mamadou Adboul Mbacke, 21ème Journées Nationales sur les Composites, ICCM22 - 22nd International Conference on Composite Materials 2019 (2019)
Identification of the quasi-static behavior of a woven composite sentitive to the environmental conditions using numercial homogenization, Identification of the quasi-static behavior of a thermoplastic woven composite sensitive to the environmental conditions using numerical homogenization, Patrick Rozycki, Mamadou Adboul Mbacke, Anh Tuan Dau, ICCM22 - 22nd International Conference on Composite Materials 2019, 21ème Journées Nationales sur les Composites (2019)
A thin layer model based on polynomial expansion for coated bodies in contact, A thin layer approach model based on polynomial expansion for coated bodies in contact, Tauno Tiirats, Nicolas Chevaugeon, Nicolas Moes, Claude Stolz, Nabil Marouf, ICCCM 2019 - VI. International Conference on Computational Contact Mechanics, VIth International Conference on Computational Contact Mechanics ICCCM (2019)
Formation of Crystallites with Low Surface Energy, Masatoshi Tosaka, Shohei Oue, Alice Gros, Bertrand Huneau, Erwan Verron, Sirilux Poompradub, Journal of Fiber Science and Technology, Vol. 74, issue 6, pp. 133-142 (2018), doi:10.2115/fiberst.2018-0019
Multi-Scale Methods for the Analysis of Creep-Damage Coupling in Concrete, Mounia Farah, Jacqueline Saliba, Frederic Grondin, Ahmed Loukili, Vol. 69, pp. 205-241, ISBN:9781785482786, Elsevier (2018), doi:10.1016/B978-1-78548-278-6.50007-4
A multiphysics model that can capture crack patterns in Si thin films based on their microstructure, Julien Réthoré, Hao Zheng, Hong Li, Junjie Li, Katerina Aifantis, Journal of Power Sources, Vol. 400, issue 9, pp. 383-391 (2018), doi:10.1016/j.jpowsour.2018.07.106
Propriétés liées à la durabilité : Chapitre 12. In partie IV : "Le béton recyclé", David Bulteel, Martin Cyr, Assia Djerbi Tegguer, Elhem Ghorbel, André Lecomte, Nordine Leklou, Thibault Lenormand, Jonathan Mai-Nhu, Jean Michel Mechling, Isabelle Moulin, Patrick Rougeau, Mickael Saillio, Lucie Schmitt, Romain Trauchessec, Ouali Amiri, pp. 293-321, IFSTTAR (2018)
kPCA-Based Parametric Solutions Within the PGD Framework, David González, Jose Vicente Aguado, Emmanuelle Abisset-Chavanne, Francisco Chinesta, Archives of Computational Methods in Engineering, Vol. 25, issue 1, pp. 69-86 (2018), doi:10.1007/s11831-016-9173-4
Effet de l’érosion par des particules de sable sur la performance des pales d’éoliennes dans les zones arides et semi-arides, Ahmida Rezig, Ahmed Yousfi, Sylvain Fréour, Frédéric Jacquemin, MATEC Web of Conferences, Vol. 261, number 05001 (2018), doi:10.1051/matecconf/201926105001
Influence of water on the short and long term mechanical behaviour of polyamide 6 (nylon) fibres and yarns, Corentin Humeau, Peter Davies, Pierre Yves Le Gac, Frédéric Jacquemin, Multiscale and Multidisciplinary Modeling, Experiments and Design, Vol. 1, issue 4, pp. 317-327 (2018), doi:10.1007/s41939-018-0036-6
Tension fatigue failure prediction for HMPE fibre ropes, Corentin Humeau, Peter Davies, Paul Smeets, Tom A.P. Engels, Leon E. Govaert, Martin Vlasblom, Frédéric Jacquemin, Polymer Testing, Vol. 65, issue 1, pp. 497-504 (2018), doi:10.1016/j.polymertesting.2017.12.014
Behaviour of bolted composite joints in hygro-thermal environments, Ivanna Pivdiablyk, Patrick Rozycki, Laurent Gornet, Frédéric Jacquemin, Stéphane Auger, ECCM18 - 18th European Conference on Composite Materials, pp. 24 - 28 (2018)
Tape surface characterization and classification in automated tape placement processability: Modeling and numerical analysis, Clara Argerich, Rubén Ibáñez, Angel León, Emmanuelle Abisset-Chavanne, Francisco Chinesta, AIMS Materials Science, Vol. 5, issue 5, pp. 870-888 (2018), doi:10.3934/matersci.2018.5.870
Perceptive study of an optimal trumpet using simulated sounds, Robin Tournemenne, Alexia Chabot, Jean-François Petiot, Joel Gilbert, CFA 2018 - 14ème Congrès Français d'Acoustique (2018)
Effect of Steel Galvanization on the Microstructure and Mechanical Performances of Planar Magnetic Pulse Welds of Aluminum and Steel, Marie-Noëlle Avettand-Fènoël, Chady Khalil, Roland Taillard, Guillaume Racineux, Metallurgical and Materials Transactions A, Vol. 49, issue 7, pp. 2721-2738 (2018), doi:10.1007/s11661-018-4651-y
Comparisons of Multiple-Impact Laws For Multibody Systems: Moreau’s Law, Binary Impacts, and the LZB Approach, Ngoc Son Nguyen, Bernard Brogliato, Vol. 35, pp. 1-45, ISBN:978-3-319-75971-5, Springer International Publishing (2018), doi:10.1007/978-3-319-75972-2_1
Analysis of stability and bifurcation in non-linear mechanics with dissipation, Claude Stolz, 10th European Solid Mechanics Conference (ESMC2018) (2018)
Hydration, shrinkage, and durability of ternary binders containing Portland cement, limestone filler and metakaolin, Gildas Medjigbodo, Emmanuel Rozière, Kevin Charrier, Laurent Izoret, Ahmed Loukili, Construction and Building Materials, Vol. 183, issue 9, pp. 114-126 (2018), doi:10.1016/j.conbuildmat.2018.06.138
Optimal control approach to simulating wear under cyclic loading, Claude Stolz, CMIS2018 (2018)
Tensor-based multiscale method for diffusion problems in quasi-periodic heterogeneous media★, Quentin Ayoul-Guilmard, Anthony Nouy, Christophe Binetruy, ESAIM: Mathematical Modelling and Numerical Analysis, Vol. 52, issue 3, pp. 869-891 (2018), doi:10.1051/m2an/2018022
Numerical Investigation on Dynamic Ultimate Strength of Stiffened Panels Considering Real Loading Scenarios, George Jagite, Quentin Derbanne, Šime Malenica, Hervé Le Sourne, Jérôme de Lauzon, Patrice Cartraud, International Conference on Ships and Offshore Structures ICSOS 2018, pp. 1-18 (2018)
Numerical modeling of pile penetration in silica sands considering the effect of grain breakage, Yin-Fu Jin, Zhen-Yu Yin, Ze-Xiang Wu, Ali Daouadji, Finite Elements in Analysis and Design, Vol. 144, pp. 15-29 (2018), doi:10.1016/j.finel.2018.02.003
Magnetic pulse forming for small aeronautic components, Cheikh-Tidiane Sow, Grégoire Bazin, D. Daniel, Emmanuel Bon, Didier Priem, Guillaume Racineux, 8 th International Conference on High Speed Forming (ICHSF 2018) (2018)
Dissimilar aluminium : galvanized steel magnetic pulse welding, Marie-Noëlle Avettand-Fènoël, C Khalil, Roland Taillard, Guillaume Racineux, Thermec'2018 (2018)
Modeling of inter- and transgranular stress corrosion crack propagation in polycrystalline material by using phase field method, Thanh-Tung Nguyen, Julien Réthoré, Marie-Christine Baietto, Jose Bolivar, Marion Fregonese, Stéphane P.A. Bordas, Journal of the mechanical behavior of biomedical materials, Vol. 26, issue 5-6, pp. 181-191 (2018), doi:10.1515/jmbm-2017-0024
Modèles hyperélastiques pour le comportement mécanique des élastomères, Erwan Verron, Plastiques et composites (2018), doi:10.51257/a-v1-am8210
Improvements in the accuracy of the theta-method for the computation of the stress intensity factor in 3d., Mathieu Le Cren, Alexandre Martin, Claude Stolz, Nicolas Moes, Patrick Massin, WCCM3 (2018)
On bounding global behaviour for composite with imperfect interface between phases, Claude Stolz, Micromechanics Euromech 601, Micromechanics of defects in crystalline solids and metals (2018)
Monitoring Strategy of Bio-Colonisation on Mooring Systems based on a Qualifying Sea State: Sensing Network Efficiency using Conditional Entropy Metric, B Decurey, Franck Schoefs, Christian Berhault, ESReDA 54th Seminar on Risk, Reliability and Safety of Energy Systems In Coastal and Marine Environments (2018)
Alkali-activated grouts with incorporated fly ash: From NMR analysis to mechanical properties, Anass Cherki El Idrissi, Michael Paris, Emmanuel Rozière, Dimitri Deneele, Sabine Darson, Ahmed Loukili, Materials Today Communications, Vol. 14, pp. 225-232 (2018), doi:10.1016/j.mtcomm.2018.01.012
On the failure resistance of quasi-periodic lattices, Arthur Glacet, Julien Réthoré, Anne Tanguy, Fabrice Morestin, Scripta Materialia, Vol. 156, issue 1, pp. 23-26 (2018), doi:10.1016/j.scriptamat.2018.07.001
Multiscale Homogenization of a glass-PA66 Fabric Composite Behavior for crash studies, Patrick Rozycki, Mamadou Adboul Mbacke, Anh Tuan Dau, ECCM18 - 18th European Conference on Composite Materials, pp. 24-28 (2018)
Energy and material flow modelling of additive manufacturing processes, Mazyar Yosofi, Olivier Kerbrat, Pascal Mognol, Virtual and Physical Prototyping, Vol. 13, issue 2, pp. 83-96 (2018), doi:10.1080/17452759.2017.1418900
Stability of a new geopolymer grout: Rheological and mechanical performances of metakaolin-fly ash binary mixtures, Abdelilah Aboulayt, Reda Jaafri, Hamza Samouh, Anass Cherki El Idrissi, Emmanuel Roziere, Redouane Moussa, Ahmed Loukili, Construction and Building Materials, Vol. 181, pp. 420-436 (2018), doi:10.1016/j.conbuildmat.2018.06.025
Development of a constitutive equation for fatigue and self-heating analysis of thermoplastic copolyester, Pierre Robard, Laurent Gornet, Patrick Rozycki, Gilles Marckmann, EMMC16 - 16th European Mechanics of Materials Conference (2018)
Towards a better understanding of the mechanical properties recovering of regenerating rat calvaria bones via synchrotron diffraction characterization., Ameni Zaouali, Baptiste Girault, David Gloaguen, Fabienne Jordana, Marie José Moya, Pierre-Antoine Dubos, Valérie Geoffroy, Matthias Schwartzkopf, Tim Snow, Himadri S. Gupta, Olga Shebanova, Konrad Schneider, Baobao Chang, BIOREGATE European Regenerative Medecine Forum 2018 (2018)
Inclusion of frequency-dependent parameters in power transmission lines simulation using harmonic analysis and proper generalized decomposition, Muhammad Haris Malik, Domenico Borzacchiello, Francisco Chinesta, Pedro Diez, International Journal of Numerical Modelling: Electronic Networks, Devices and Fields, Vol. 31, number 147, issue 5 (2018), doi:10.1002/jnm.2331
Effect of chemical and thermal activation on the microstructural and mechanical properties of more sustainable UHPC, Omar Abdulkareem, Amor Ben Fraj, Marwen Bouasker, Abdelhafid Khelidj, Construction and Building Materials, Vol. 169, issue 3, pp. 567-577 (2018), doi:10.1016/j.conbuildmat.2018.02.214
Stress gradient determination in anti-corrosion multilayer coating., Pierre-Antoine Dubos, Quentin Hatte, Pascal Casari, Mireille Richard-Plouet, Pierre-Yves Jouan, Samuel Branchu, Nadia Guitter, Journée de la section Ouest de la SF2M 2018 (2018)
A numerical model including thermodynamic equilibrium, kinetic control and surface complexation in order to explain cation type effect on chloride binding capability of concrete, van Quan Tran, Anthony Soive, Stéphanie Bonnet, Abdelhafid Khelidj, Construction and Building Materials, Vol. 191, issue 7, pp. 608-618 (2018), doi:10.1016/j.conbuildmat.2018.10.058
Cartographie par diffraction des neutrons du tenseur complet des contraintes résiduelles dans des aciers préparés par fusion laser sur lit de poudre., Baptiste Girault, David Gloaguen, Marie José Moya, Bruno Courant, Pierre-Antoine Dubos, J. Rebelo Kornmeier, Winfried Kockelmann, Saurabh Kabra, Daniel Marcos, Maxime Limousin, Matériaux 2018 (2018)
Effect of moisture on the adhesion of CFRP-to-steel bonded joints using peel tests, M. Arouche, S. Budhe, L. Alves, S. Teixeira de Freitas, M. Banea, Silvio DE BARROS, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 40, number 2, issue 1 (2018), doi:10.1007/s40430-017-0959-6
A study of various indicators to determine the fatigue limit for woven carbon/epoxy composites under self heating methodology, Laurent Gornet, Deepika Sudevan, Patrick Rozycki, Procedia Engineering, Vol. 213, issue 1, pp. 161-172 (2018), doi:10.1016/j.proeng.2018.02.018
Propagation des ondes mécaniques dans des milieux périodiques multi-hélicoïdaux, Changwei Zhou, Fabien Treyssede, Patrice Cartraud, Advanced theoretical and numerical methods for waves in structured media, pp. 1 p. (2018)
A Discontinuous Galerkin Material Point Method for the solution of impact problems in solid dynamics, Adrien Renaud, Thomas Heuzé, Laurent Stainier, Journal of Computational Physics, Vol. 369, issue 1–2, pp. 80-102 (2018), doi:10.1016/j.jcp.2018.05.001
Phenomenological modeling of abradable wear in turbomachines, Bérenger Berthoul, Alain Batailly, Laurent Stainier, Mathias Legrand, Patrice Cartraud, Mechanical Systems and Signal Processing, Vol. 98, issue 0, pp. 770-785 (2018), doi:10.1016/j.ymssp.2017.05.020
Multiscale Method with Patches for the Solution of Linear Parabolic Equations with Localized Uncertainties, Florent Pled, Mathilde Chevreuil, Anthony Nouy, 13th World Congress on Computational Mechanics (WCCM XIII) (2018)
A mixed POD–PGD approach to parametric thermal impervious soil modeling: Application to canyon streets, Marie-Hélène Azam, Sihem Guernouti, Marjorie Musy, Julien Berger, Philippe Poullain, Auline Rodler, Sustainable Cities and Society, Vol. 42, pp. 444-461 (2018), doi:10.1016/j.scs.2018.08.010
Détermination de la souplesse hors plan d’un assemblage de composites boulonnés à l’aide d’une démarche d’homogénéisation, Laurent Gornet, Romain Hamonou, Frédéric Jacquemin, Stéphane Auger, Pierre Chalandon, Matériaux et Techniques, Vol. 106, number 302, issue 3 (2018), doi:10.1051/mattech/2018052
How spatial variability of initial porosity and fines content affects internal erosion in soils, Jie Yang, Zhen-Yu Yin, Pierre-Yves Hicher, Farid Laouafa, Proceedings of China-Europe Conference on Geotechnical Engineering, pp. 439-443, Springer International Publishing (2018), doi:10.1007/978-3-319-97112-4_99
Upper Bounds on the Permeability of Random Porous Media, François Bignonnet, Transport in Porous Media, Vol. 122, issue 1, pp. 57-76 (2018), doi:10.1007/s11242-017-0989-7
How do recycled concrete aggregates modify the shrinkage and self-healing properties?, Sonagnon Medjigbodo, Ahmed Bendimerad, Emmanuel Rozière, Ahmed Loukili, Cement and Concrete Composites, Vol. 86, issue 8, pp. 72-86 (2018), doi:10.1016/j.cemconcomp.2017.11.003
Support optimization for additive manufacturing: application to FDM, Nicolas Boyard, Olivier Christmann, Mickaël Rivette, Olivier Kerbrat, Simon Richir, Rapid Prototyping Journal, Vol. 24, issue 1, pp. 69-79 (2018), doi:10.1108/RPJ-04-2016-0055
New Spatial Correlation Assessment Procedure: application to Île de Ré Bridge data, Romain Clerc, Franck Schoefs, Mestapha Oumouni, IABSE SYMPOSIUM NANTES 2018 – Tomorrow’s Megastructures, pp. 24-51, IABSE (2018)
Data-based derivation of material response, Adrien Leygue, Michel Coret, Julien Réthoré, Laurent Stainier, Erwan Verron, Computer Methods in Applied Mechanics and Engineering, Vol. 331, issue 15, pp. 184-196 (2018), doi:10.1016/j.cma.2017.11.013
Cost-effective design to address climate change impacts, Emilio Bastidas-Arteaga, Mark Stewart, Vol. 32, pp. 613-636, ISBN:9780081021811, Elsevier (2018), doi:10.1016/B978-0-08-102181-1.00022-8
Reliability of Reinforced Concrete Structures Subjected to Corrosion-Fatigue and Climate Change, Emilio Bastidas-Arteaga, International Journal of Concrete Structures and Materials, Vol. 12, number 625, issue 1 (2018), doi:10.1186/s40069-018-0235-x
Fatigue behaviour of an industrial synthetic rubber, Thomas Balutch, Bertrand Huneau, Yann Marco, Pierre Charrier, Clément Champy, MATEC Web of Conferences, Vol. 165, number 22004 (2018), doi:10.1051/matecconf/201816522004
Quantification of cracks in reinforced concrete structures using distributed fiber optic sensors, Antoine Bassil, Xavier Chapeleau, Dominique Leduc, Odile Abraham, EWSHM 2018, 9th European Workshop on Structural Health Monitoring Series, pp. 9p (2018)
Internal Erosion, Pierre-Yves Hicher, Didier Marot, Luc Sibille, Vol. 249, pp. 291-334, ISBN:9781785482786, Elsevier (2018), doi:10.1016/B978-1-78548-278-6.50009-8
Relating fragmentation, plastic work and critical state in crushable rock clasts, Wei Hu, Zhen-Yu Yin, Gianvito Scaringi, Christophe Dano, Pierre-Yves Hicher, Engineering Geology, Vol. 246, issue 1–4, pp. 326-336 (2018), doi:10.1016/j.enggeo.2018.10.012
Numerical modeling of elastic guided wave propagation in bi-helical periodic media, Changwei Zhou, Fabien Treyssede, Patrice Cartraud, 2nd Franco-Chinese Acoustic Conference, pp. 1p (2018)
On the multi-scale description of micro-structured fluids composed of aggregating rods, Marta Perez, Adrien Scheuer, Emmanuelle Abisset-Chavanne, Amine Ammar, Francisco Chinesta, Roland Keunings, Continuum Mechanics and Thermodynamics, Vol. 31, issue 4, pp. 955-967 (2018), doi:10.1007/s00161-018-0659-1
Effective transient behaviour of inclusions in diffusion problems, Laurence Brassart, Laurent Stainier, Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, Vol. 98, issue 6, pp. 981-998 (2018), doi:10.1002/zamm.201700187
Développement d'une loi de comportement pour la fatigue et l'auto-échauffement d'un thermoplastique copolyester-ether, Pierre Robard, Laurent Gornet, Gilles Marckmann, Jean-Charles Guldner, Frederic Maitay, Patrick Rozycki, Colloque national MECAMAT Aussois « Matériaux Numériques » (2018)
A new methodology for race-tracking detection and criticality in resin transfer molding process using pressure sensors, Nihad Siddig, Christophe Binetruy, Elena Syerko, Pavel Simacek, Suresh Advani, Journal of Composite Materials, Vol. 52, issue 29, pp. 4087-4103 (2018), doi:10.1177/0021998318774829
Étude mésoscopique de la transformation αγ dans le fer, Nicolas Bruzy, Michel Coret, Laurent Stainier, Bertrand Huneau, Emmanuel Bertrand, Colloque national MECAMAT Aussois « Matériaux Numériques », pp. 1-3 (2018)
Is alfa a vegetal fiber suitable for making green reinforced structure concrete?, Mohammed Khelifa, Nordine Leklou, Tahar Bellal, Ronan L. Hébert, Béatrice Ledésert, European Journal of Environmental and Civil Engineering, Vol. 22, issue 6, pp. 686-706 (2018), doi:10.1080/19648189.2016.1217792
Experimental and Numerical Investigation of the Silicon Particle Distribution in Electrospun Nanofibers, Saja Al-Ajrash, Khalid Lafdi, Erick Vasquez, Francisco Chinesta, Philippe Le Coustumer, Langmuir, Vol. 34, issue 24, pp. 7147-7152 (2018), doi:10.1021/acs.langmuir.8b01167
Microscopic modelling of orientation kinematics of non-spherical particles suspended in confined flows using unilateral mechanics, Adrien Scheuer, Emmanuelle Abisset-Chavanne, Francisco Chinesta, Roland Keunings, Comptes Rendus. Mécanique, Vol. 346, issue 1, pp. 48-56 (2018), doi:10.1016/j.crme.2017.11.003
Very High Strain Rate Range, Thomas Heuzé, Xiaoli Guo, Ramzi Othman, Vol. 207, pp. 249-272, ISBN:978-3-319-71917-7, Springer International Publishing (2018), doi:10.1007/978-3-319-71919-1_9
On the use of thermographic technique to assess the fatigue performance of bonded joints, C.F.C. Bandeira, P.P. Kenedi, L.F.G. Souza, Silvio DE BARROS, International Journal of Adhesion and Adhesives, Vol. 83, issue 6, pp. 137-142 (2018), doi:10.1016/j.ijadhadh.2018.02.016
Béton recyclé au jeune âge, Emmanuel Rozière, Ahmed Zakarya Bendimerad, Jean-Claude Souche, Philippe Devillers, Marie Salgues, Ahmed Loukili, Eric Garcia-Diaz, pp. 792 p., Ifsttar (2018)
Stress effects on the relative permeabilities of tight sandstones, Laurent Jeannin, François Bignonnet, Franck Agostini, Yi Wang, Comptes Rendus. Géoscience, Vol. 350, issue 3, pp. 110-118 (2018), doi:10.1016/j.crte.2017.09.018
Experimental monitoring of the self-heating properties of thermoplastic composite materials during tensile and cyclic tests, Laura Muller, Jean-Michel Roche, Antoine Hurmane, Catherine Peyrac, Laurent Gornet, FATIGUE 2018 (2018)
Shear strength performance of marine sediments stabilized using cement, lime and fly ash, Ana Paula Furlan, Andry Razakamanantsoa, Harifidy Ranaivomanana, Daniel Levacher, Takeshi Katsumi, Construction and Building Materials, Vol. 184, issue 4, pp. 454-463 (2018), doi:10.1016/j.conbuildmat.2018.06.231
Electromagnetic Processing for Elaboration of dissimilar Joints. Case studies with Aluminium, S Marya, Marie-Noëlle Avettand-Fènoël, C Khalil, Guillaume Racineux, 9th Int. Symposium on Electromagnetic Processing of Metals, EPM2018 (2018)
Fatigue initiation mechanisms in elastomers: a microtomography-based analysis, Thomas Glanowski, Bertrand Huneau, Yann Marco, V. Le Saux, Clément Champy, Pierre Charrier, MATEC Web of Conferences, Vol. 165, number 08005 (2018), doi:10.1051/matecconf/201816508005
A new hybrid explicit/implicit in-plane-out-of-plane separated representation for the solution of dynamic problems defined in plate-like domains, Giacomo Quaranta, Brice Bognet, Rubén Ibáñez, Alain Trameçon, Eberhard Haug, Francisco Chinesta, Computers & Structures, Vol. 210, pp. 135-144 (2018), doi:10.1016/j.compstruc.2018.05.001
A comparison of displacement-based Timoshenko multi-fiber beams finite element formulations and elasto-plastic applications, Ibrahim Bitar, Stéphane Grange, Panagiotis Kotronis, Nathan Benkemoun, European Journal of Environmental and Civil Engineering, Vol. 22, issue 4, pp. 464-490 (2018), doi:10.1080/19648189.2016.1210031
Effective permeability averaging scheme to address in-plane anisotropy effects in multi-layered preforms, Simone Bancora, Christophe Binetruy, Suresh Advani, Elena Syerko, Sebastien Comas-Cardona, Composites Part A: Applied Science and Manufacturing, Vol. 113, issue 6, pp. 359-369 (2018), doi:10.1016/j.compositesa.2018.07.025
Investigation of Spatial Scale Effects on Suffusion Susceptibility, Chuheng Zhong, van Thao Le, Fateh Bendahmane, Didier Marot, Zhen-Yu Yin, Journal of Geotechnical and Geoenvironmental Engineering, Vol. 144, number 579, issue 9 (2018), doi:10.1061/(ASCE)GT.1943-5606.0001935
Parametric and multiscale study of soil suffusion susceptibility, Didier Marot, Fateh Bendahmane, Rachel Gelet, Van Le, Lingran Zhang, Chuheng Zhong, ournées Nationales de Géotechnique et de Géologie de l’Ingénieur (2018)
Squeeze flow in heterogeneous discontinuous viscous woven prepreg laminates. Experimental measurements and 3D modeling, Grégoire Sorba, Christophe Binetruy, Adrien Leygue, Sandeep Gudiwada, Jean-Michel Lebrun, François Bertrand, Sebastien Comas-Cardona, Thomas Jollivet, Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, Vol. 28, issue 1, pp. 35-53 (2018), doi:10.3166/RCMA.28.35-53
Addressing the need to monitor concrete fatigue with Non Destructive Testing: preliminary results of Infrastar European project, Odile Abraham, Ernst Niederleithinger, Xavier Chapeleau, Piotr Klikowicz, Eugen Brühwiler, Antoine Bassil, Xin Wang, Joyraj Chakraborty, Imane Bayane, Dominique Leduc, Marek Salamak, Andriy Katunin, John Dalsgaard Sorensen, SMT and NDT-CE 2018, pp. 12p (2018)
Neutron diffraction investigation of full residual stress tensor gradient in Ti-alloy achieved by Selective Laser Melting: a complex issue, Baptiste Girault, David Gloaguen, Marie José Moya, Bruno Courant, Pierre-Antoine Dubos, Joana Kornmeier, VDI-TUM Expertenforum (2018)
An experimental study of water diffusion in carbon/epoxy composites under static tensile stress, Corentin Humeau, Peter Davies, Frédéric Jacquemin, Composites Part A: Applied Science and Manufacturing, Vol. 107, issue 1, pp. 94-104 (2018), doi:10.1016/j.compositesa.2017.12.016
A goal-oriented model reduction technique for parametric fluid-structure problems, Cédric Leblond, Mathilde Chevreuil, C. Allery, Claudine Béghein, 6th European Conference on Computational Mechanic (2018)
Design methodology for variable shell mould thickness and thermal conductivity additively manufactured, Tugdual Amaury Marie Le Néel, Pascal Mognol, Jean-Yves Hascoët, Welding in the World, Vol. 62, issue 5, pp. 1059-1072 (2018), doi:10.1007/s40194-018-0598-2
Novel SPH SIMSAND–Based Approach for Modeling of Granular Collapse, Zhen-Yu Yin, Zhuang Jin, Panagiotis Kotronis, Ze-Xiang Wu, International Journal of Geomechanics, Vol. 18, issue 11 (2018), doi:10.1061/(ASCE)GM.1943-5622.0001255
Defect nucleation modelling, Claude Stolz, Journal of Micromechanics and Molecular Physics, Vol. 03, number 1840010, issue 03n04 (2018), doi:10.1142/S2424913018400106
Thermal behaviour of a building in its environment: Modelling, experimentation, and comparison, Auline Rodler, Sihem Guernouti, Marjorie Musy, Julien Bouyer, Energy and Buildings, Vol. 168, issue May, pp. 19-34 (2018), doi:10.1016/j.enbuild.2018.03.008
Chapitre 11 - Propriétés mécaniques différées, Frederic Grondin, Caroline de Sa, Thierry Sedran, Franck Cassagnabère, Farid Benboudjema, Ahmed Zakarya Bendimerad, Menghuan Guo, Ahmed Loukili, Pierre Nicot, Emmanuel Rozière, Bernard Fouré, pp. pp 241-272, Ifsttar (2018)
Seismic Retrofit Screening of Existing Highway Bridges With Consideration of Chloride-Induced Deterioration: A Bayesian Belief Network Model, Solomon Tesfamariam, Emilio Bastidas-Arteaga, Zoubir Lounis, Frontiers in Built Environment, Vol. 4, number 1671 (2018), doi:10.3389/fbuil.2018.00067
Reliability assessment and updating of notched timber components subjected to environmental and mechanical loading, T.-B. Tran, Emilio Bastidas-Arteaga, Y. Aoues, C Nziengui, S Hamdi, R Pitti, E. Fournely, Franck Schoefs, A. Chateauneuf, Engineering Structures, Vol. 166, issue 5, pp. 107-116 (2018), doi:10.1016/j.engstruct.2018.03.053
Evolution of single carbon and glass fibrous tow cross-sections in dry and lubricated states during compaction perpendicular to the fibers, A. Sakkalatty Dharmalingam, Julie Hemmer, Anne-Sophie Lectez, Christophe Binetruy, Sebastien Comas-Cardona, Composites Part B: Engineering, Vol. 148, issue 12, pp. 235-242 (2018), doi:10.1016/j.compositesb.2018.05.001
Creep Behavior of an over-consolidated clay in relation to the microstructure, Creep behavior of an over-consolidated clay in relation to the microstructure, Dan Zhao, Mahdia Hattab, Zhenyu Yin, Pierre-Yves Hicher, Conference of the ASCE Engineering Mechanics Institute (EMI 2018), GDRI Geomech Multi-Physics and Multiscale Couplings in Geo-environmental Mechanics (2018), doi:10.6084/m9.figshare.14787681.v1,
Combination of the Wenner resistivimeter and Torrent permeameter methods for assessing carbonation depth and saturation level of concrete, Stéphanie Bonnet, Jean-Paul Balayssac, Construction and Building Materials, Vol. 188, issue 133, pp. 1149-1165 (2018), doi:10.1016/j.conbuildmat.2018.07.151
Advanced parametric space-frequency separated representations in structural dynamics: A harmonic–modal hybrid approach, Malik Muhammad Haris, Domenico Borzacchiello, José Vicente Aguado, Francisco Chinesta, Comptes Rendus. Mécanique, Vol. 346, issue 7, pp. 590-602 (2018), doi:10.1016/j.crme.2018.04.005
Statistical investigation of different analysis methods for chloride profiles within a real structure in a marine environment, Inès Othmen, Stéphanie Bonnet, Franck Schoefs, Ocean Engineering, Vol. 157, issue 04014231, pp. 96-107 (2018), doi:10.1016/j.oceaneng.2018.03.040
Numerical simulation of the experimental results of the seismic strengthening of existing structures, Elpida Georgiou, Nicholas Kyriakides, Christis Chrysostomou, Panagiotis Kotronis, Christiana Filippou, 16th European Conference on Earthquake Engineering (2018)
Toward a better understanding of the effects of cement treatment on microstructure and hydraulic properties of compacted soils, Harifidy Ranaivomanana, Andry Razakamanantsoa, MATEC Web of Conferences, Vol. 163, number 06007 (2018), doi:10.1051/matecconf/201816306007
Consistent data-driven computational mechanics, David Gonzáles, Francisco Chinesta, Elías Cueto, AIP Conference Proceedings, Vol. 160, Author(s) (2018), doi:10.1063/1.5034931
Adaptive anisotropic integration scheme for high-order fictitious domain methods: Application to thin structures, Grégory Legrain, Nicolas Moes, International Journal for Numerical Methods in Engineering, Vol. 114, issue 8, pp. 882-904 (2018), doi:10.1002/nme.5769
Flexible PZT thin film transferred on polymer substrate, Thibault Dufay, Benoit Guiffard, Raynald Seveno, Stéphane Ginestar, Jean-Christophe Thomas, Surface and Coatings Technology, Vol. 343, issue 16, pp. 148-152 (2018), doi:10.1016/j.surfcoat.2017.09.080
Modélisation numérique de la propagation des ondes guidées dans des milieux périodiques multi-hélicoïdaux, Changwei Zhou, Fabien Treyssède, Patrice Cartraud, CFA 2018, 14ème Congrès Français d'Acoustique, pp. 1p. (2018)
Unloading during the infusion process: Direct measurement of the dual-scale fibrous microstructure evolution with X-ray computed tomography, Julie Hemmer, Christian Burtin, Sébastien Comas-Cardona, Christophe Binetruy, Thibaut Savart, Arthur Babeau, Composites Part A: Applied Science and Manufacturing, Vol. 115, pp. 147-156 (2018), doi:10.1016/j.compositesa.2018.09.013
Optimal projection of observations in a Bayesian setting, Loïc Giraldi, Olivier Le Maitre, Ibrahim Hoteit, Omar Knio, Computational Statistics and Data Analysis, Vol. 124, issue 3, pp. 252-276 (2018), doi:10.1016/j.csda.2018.03.002
Correction Notice: Impact of brass contents on thermal, friction and wear properties of brake linings composites, Amira Sellami, Mohamed Kchaou, Reçai Kus, Jamal Fajoui, Riadh Elleuch, Frédéric Jacquemin, Mechanics & Industry, Vol. 19, number 605, issue 6 (2018), doi:10.1051/meca/2018048
Multimodal setups for the study of fresh Zircaloy-4 claddings under simulated thermal-mechanical RIA conditions, Thomas Jailin, Nicolas Tardif, Jean Desquines, Michel Coret, Thierry Breville, Philippe Chaudet, Marie-Christine Baietto, Vincent Georgenthum, Christian Bernaudat, PHOTOMECHANICS 2018 (2018)
Mechanical behavior of as-fabricated Zircaloy-4 claddings under the simulated thermo-mechanical post-DNB conditions of a Reactivity Initiated Accident (RIA), Thomas Jailin, Nicolas Tardif, Jean Desquines, Michel Coret, Marie-Christine Baietto, Thierry Breville, Philippe Chaudet, Vincent Georgenthum, Top Fuel 2018 (2018)
3-D mesoscale simulation of crack-permeability coupling in the Brazilian splitting test, Nathan Benkemoun, Hayder Al khazraji, Philippe Poullain, Marta Choinska, Abdelhafid Khelidj, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 42, issue 3, pp. 449-468 (2018), doi:10.1002/nag.2749
Compréhension des socio-écosystèmes littoraux et marins pour la prévention et la gestion des risques, Philipp Hess, Sophie Pardo, Elodie Simon, Laurent Barillé, Régis Baron, Patrick Bourseau, Bruno Cognie, Justine Dumay, Emmanuelle Geslin, Patrice Guillotreau, Thierry Guineberteau, Christine Herrenknecht, Thierry Lebeau, Stéphanie Mahévas, Véronique Martin-Jézéquel, Anthony Massé, Denis Mercier, Florence Mondeguer, Pierre Petitgas, Franck Schoefs, Véronique Séchet, Vincent Turpin, Brice Trouillet, Laurent Vandanjon, Zouher Amzil (2018)
CARPIUC benchmark overview: crack advance, reorientation, propagation and initiation under complex loadings, Andreea Carpiuc, Martin Poncelet, Julien Réthoré, Stéphane Roux, Advanced Modeling and Simulation in Engineering Sciences, Vol. 5, number 537, issue 1 (2018), doi:10.1186/s40323-018-0115-6
Wavelet-based multiscale proper generalized decomposition, Angel Leon, Anaïs Barasinski, Emmanuelle Abisset-Chavanne, Elias Cueto, Francisco Chinesta, Comptes Rendus. Mécanique, Vol. 346, issue 7, pp. 485-500 (2018), doi:10.1016/j.crme.2018.04.013
Extended Finite Element Methods, Nicolas Moës, John Dolbow, Natarajan Sukumar, Vol. 200, pp. 1-21, ISBN:9781119003793, Wiley (2018), doi:10.1002/9781119176817.ecm2111
A pavement-watering thermal model for SOLENE-microclimat: development and evaluation, Marie-Hélène Azam, Jérémy Bernard, Benjamin Morille, Marjorie Musy, Hervé Andrieu, Urban Climate, Vol. 25, issue 3–4, pp. 22-36 (2018), doi:10.1016/j.uclim.2018.04.005
SMART 2013: Lessons learned from the international benchmark about the seismic margin assessment of nuclear RC buildings, Benjamin Richard, François Voldoire, Maxime Fontan, Jacky Mazars, Thierry Chaudat, Salim Abouri, Nicolas Bonfils, Engineering Structures, Vol. 161, issue 2, pp. 207-222 (2018), doi:10.1016/j.engstruct.2018.02.023
Variationally consistent computational homogenization of transient heat conduction using Craig-Bampton mode synthesis, Abdullah Waseem, Thomas Heuzé, Laurent Stainier, V Kouznetsova, M Geers, Colloque national MECAMAT (2018)
Data-driven in computational plasticity, Ruben Ibáñez, Emmanuelle Abisset-Chavanne, Elías Cueto, Francisco Chinesta, AIP conference proceedings, Author(s) (2018), doi:10.1063/1.5034932
Simulation of impacts on elastic-viscoplastic solids with the flux-difference splitting finite volume method applied to non-uniform quadrilateral meshes, Thomas Heuzé, Advanced Modeling and Simulation in Engineering Sciences, Vol. 5, number 787, issue 1 (2018), doi:10.1186/s40323-018-0101-z
Stability analysis of rough surfaces in adhesive normal contact, Valentine Rey, Jeremy Bleyer, Computational Mechanics, Vol. 62, issue 5, pp. 1155-1167 (2018), doi:10.1007/s00466-018-1556-y
Sensitivity thermal analysis in the laser-assisted tape placement process, Marta Perez, Anaïs Barasinski, Benoît Courtemanche, Chady Ghnatios, Francisco Chinesta, AIMS Materials Science, Vol. 5, issue 6, pp. 1053-1072 (2018), doi:10.3934/matersci.2018.6.1053
Hydration process of natural hydraulic lime blended cement mortars, Reda Jaafri, Emmanuel Rozière, Syed Yasir Alam, Ahmed Loukili, SynerCrete’18 International Conference on Interdisciplinary Approaches for Cement-based Materials and Structural Concrete, pp. 1-6 (2018)
Vers la compréhension de la restauration des propriétés mécaniques des tissus osseux lors du processus de régénération., Ameni Zaouali, David Gloaguen, Fabienne Jordana, Marie José Moya, Pierre-Antoine Dubos, Valérie Geoffroy, Matthias Schwartzkopf, Tim Snow, Himadri S. Gupta, Olga Shebanova, Baobao Chang, Baptiste Girault, Matériaux 2018 (2018)
A Manifold Learning Approach for Integrated Computational Materials Engineering, Elena Lopez, David Gonzalez, Jose Aguado, Emmanuelle Abisset-Chavanne, Elias Cueto, Christophe Binetruy, Francisco Chinesta, Archives of Computational Methods in Engineering, Vol. 25, issue 1, pp. 59-68 (2018), doi:10.1007/s11831-016-9172-5
Suffusion susceptibility investigation by energy-based method and statistical analysis, van Thao Le, Didier Marot, Abdul Rochim, Fateh Bendahmane, Hong Nguyen, Canadian Geotechnical Journal, Vol. 55, issue 1, pp. 57-68 (2018), doi:10.1139/cgj-2017-0024
A generalized Timoshenko beam with embedded rotation discontinuity, Ibrahim Bitar, Panagiotis Kotronis, Nathan Benkemoun, Stéphane Grange, Finite Elements in Analysis and Design, Vol. 150, issue July 1977, pp. 34-50 (2018), doi:10.1016/j.finel.2018.07.002
Numerical study of chloride ingress in concrete: effect of exposure concentration, Mohamad Achour, Ouali Amiri, François Bignonnet, Emmanuel Rozière, RILEM Proceedings, Vol. 121, pp. 603-608, RILEM (2018), doi:10.5281/zenodo.1405563
Numerical study of the effect of moisture on chloride and carbon dioxide transport in concrete, Mohamad Achour, Ouali Amiri, François Bignonnet, Emmanuel Rozière, Proceedings of the 12th fib International PhD Symposium in Civil Engineering, Vol. 45, pp. 1065-1070 (2018)
Neutron diffraction investigation of full residual stress tensor gradient in Fe-based materials prepared by Selective Laser Melting., Baptiste Girault, David Gloaguen, Bruno Courant, Maxime Limousin, Daniel Marcos, Pierre-Antoine Dubos, Marie José Moya, Saurabh Kabra, Winfried Kockelmann, Joana Kornmeier, ECRS 10, European Conference on Residual Stress (2018)
Multi-scale investigation of the effect of γ irradiations on the mechanical properties of cementitious materials, Maxime Robira, Benoit Hilloulin, Ahmed Loukili, Gildas Potin, X. Bourbon, A. Abdelouas, Construction and Building Materials, Vol. 186, pp. 484-494 (2018), doi:10.1016/j.conbuildmat.2018.07.038
A Coupled Hydro-Mechanical Modeling of Tunnel Leakage in Sand Layer, Jie Yang, Zhen-Yu Yin, Dong-Mei Zhang, Pierre-Yves Hicher, Farid Laouafa, Proceedings of GeoShanghai 2018 International Conference : Tunnelling and Underground Construction, pp. 506-515, Springer Singapore (2018), doi:10.1007/978-981-13-0017-2_51
Macroscopic Models For Crack Propagation In Heterogeneous Lattices Based On Phase Field Method, Thi Hai Nhu Nguyen, Julien Yvonnet, Julien Réthoré, 13th World Congress on Computational Mechanics (2018)
Kriging-Based Reliability Analysis of Strip Footings Resting on Spatially Varying Soils, Tamara Al-Bittar, Abdul-Hamid Soubra, Jawad Thajeel, Journal of Geotechnical and Geoenvironmental Engineering, Vol. 144, number 11, issue 10 (2018), doi:10.1061/(ASCE)GT.1943-5606.0001958
Nouvelle méthode de maintenance CBM pour améliorer la durée de vie des pales d’éoliennes implantées dans les zones arides, Ahmida Rezig, Ahmed Yousfi, Sylvain Fréour, Frédéric Jacquemin, Samuel Branchu, MATEC Web of Conferences, Vol. 261, number 01001, issue 2 (2018), doi:10.1051/matecconf/201926101001
Stress Gradient Determination in Anti-Corrosion Multilayer Coating, Pierre-Antoine Dubos, Quentin Hatte, Pascal Casari, Mireille Richard-Plouet, Pierre-Yves Jouan, Samuel Branchu, Nadia Guitter, Materials Science Forum, Vol. 941, issue 4, pp. 1632-1638 (2018), doi:10.4028/www.scientific.net/MSF.941.1632
Statistical vibration-based damage localization on Saint-Nazaire Bridge mockup, Md Delwar Hossain Bhuyan, Yann Lecieux, Jean-Christophe Thomas, Cyril Lupi, Franck Schoefs, Michael Döhler, Laurent Mevel, 2018 - 40th IABSE Symposium, pp. 1-8 (2018)
Effect of pre-loading on chloride diffusion in concrete, Truyen Tran, Quyet Truong, Harifidy Ranaivomanana, A. Khelidj, Journal of Asian Concrete Federation, Vol. 4, issue 1, pp. 22-28 (2018), doi:10.18702/acf.2018.07.3.1.22
Energy Harvesting using a Lead Zirconate Titanate (PZT) Thin Film on a Polymer Substrate, Thibault Dufay, Benoit Guiffard, Raynald Seveno, Jean-Christophe Thomas, Energy Technology, Vol. 6, issue 5, pp. 917-921 (2018), doi:10.1002/ente.201700732
A hypoplastic macroelement formulation for single batter piles in sand, Zheng Li, Panagiotis Kotronis, Sandra Escoffier, Claudio Tamagnini, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 42, issue 12, pp. 1346-1365 (2018), doi:10.1002/nag.2794
Integration of tidal range energy with undersea pumped storage, Rodica Loisel, Martin Sanchez Angulo, Franck Schoefs, Alexandre Gaillard, Renewable Energy, Vol. 126, issue 4, pp. 38-48 (2018), doi:10.1016/j.renene.2018.03.037
Strong and tough metal/ceramic micro‐laminates, Claudio Ferraro, Sylvain Meille, Julien Réthoré, Na Ni, Jérome Chevalier, Eduardo Saiz, Acta Materialia, Vol. 144, issue 11, pp. 202-215 (2018), doi:10.1016/j.actamat.2017.10.059
Electrospun PMMA polymer blend nanofibrous membrane: electrospinability, surface morphology and mechanical response, Jacky Jia Li Lee, Andri Andriyana, Bee Chin Ang, Bertrand Huneau, Erwan Verron, Materials Research Express, Vol. 5, number 065311, issue 6 (2018), doi:10.1088/2053-1591/aac87b
The heart regulates the endocrine response to heart failure: cardiac contribution to circulating neprilysin, Mattia Arrigo, Nicolas Vodovar, Hélène Nougué, Malha Sadoune, Chris Pemberton, Pamela Ballan, Pierre-Olivier Ludes, Nicolas Gendron, Alain Carpentier, Bernard Cholley, Philippe Bizouarn, Alain Cohen-Solal, Jagmeet Singh, Jackie Szymonifka, Christian Latremouille, Jane-Lise Samuel, Jean-Marie Launay, Julien Pottecher, a Mark Richards, Quynh Truong, David Smadja, Alexandre Mebazaa, European Heart Journal, Vol. 39, issue 20, pp. 1794-1798 (2018), doi:10.1093/eurheartj/ehx679
Durability of mechanical performances of composite assemblies in a hygro-thermo-mechanical environment, Ivanna Pivdiablyk, Patrick Rozycki, Laurent Gornet, Frédéric Jacquemin, Stéphane Auger, Sophie Toillon-Rey Flandrin, EMMC16 - 16th European Mechanics of Materials Conference (2018)
Détermination du gradient de contrainte dans un revêtement multicouche anticorrosion, Pierre-Antoine Dubos, Quentin Hatte, Pascal Casari, Mireille Richard-Plouet, Pierre-Yves Jouan, Samuel Branchu, Nadia Guitter, Traitements et Matériaux (2018)
Effects of Cement Treatment on Microstructural, Hydraulic, and Mechanical Properties of Compacted Soils : Characterization and Modeling, Harifidy Ranaivomanana, Andry Razakamanantsoa, Ouali Amiri, International Journal of Geomechanics, Vol. 18, issue 9 (2018), doi:10.1061/(ASCE)GM.1943-5622.0001248
Coupling statistical indentation and microscopy to evaluate micromechanical properties of materials: Application to viscoelastic behavior of irradiated mortars, Benoit Hilloulin, Maxime Robira, Ahmed Loukili, Cement and Concrete Composites, Vol. 94, issue 5, pp. 153-165 (2018), doi:10.1016/j.cemconcomp.2018.09.008
Behavior of Granular Materials Affected by Grain Breakage, Christophe Dano, Carlos Ovalle, Zhen-Yu Yin, Ali Daouadji, Pierre-Yves Hicher, Vol. 55, pp. 95-132, ISBN:9781785482786, Elsevier (2018), doi:10.1016/B978-1-78548-278-6.50004-9
Bonded repair of composite structures in aerospace application: a review on environmental issues, S Budhe, M Banea, Silvio DE BARROS, Applied Adhesion Science, Vol. 6, number 1797, issue 1 (2018), doi:10.1186/s40563-018-0104-5
The Discontinuous Galerkin Material Point Method for the simulation of hyperbolic problems in finite deforming solids, Adrien Renaud, Thomas Heuzé, Laurent Stainier, 6th European Conference on Computational Mechanics (ECCM 6) (2018)
Non-linear constitutive law for a glass-pa66 fabric composite dedicated to numerical simulations in crash studies, Mamadou Mbacke, Patrick Rozycki, 18th European Conference on Composite Materials, pp. 1-7 (2018)
Analysis of the failure at notches and cavities in quasi-brittle media using the Thick Level Set damage model and comparison with the coupled criterion, Jihed Zghal, Kevin Moreau, Nicolas Moës, Dominique Leguillon, Claude Stolz, International Journal of Fracture, Vol. 211, issue 1-2, pp. 253-280 (2018), doi:10.1007/s10704-018-0287-6
Round robin of external samples for residual stress analyses by X-ray diffraction, Fabien Lefebvre, Eric Wasniewski, Thierry Bergey, A. Roth, Manuel François, Patrick Allain, P. Le-Bec, C. Fisher, Sophie Berveiller, Laurence Besnauld, L. Mermillod-Blondin, Yann Cheynet, Renaud Frappier, Guillaume Geandier, Marie-José Moya, F. Savrot, 10th European Conference on Residual Stresses, ECRS-10 (2018)
Rapid Determination of the Fatigue Limit by the Simulation of Self-Heating Test by the Collaborative Model Based On the Fractional Derivative Approach, Alina Krasnobrizha, Laurent Gornet, Patrick Rozycki, Pascal Cosson, Procedia Engineering, Vol. 213, pp. 192-206 (2018), doi:10.1016/j.proeng.2018.02.021
A review on additive manufacturing of sand molds by binder jetting and selective laser sintering, Tugdual Amaury Le Néel, Pascal Mognol, Jean-Yves Hascoët, Rapid Prototyping Journal, Vol. 24, issue 8, pp. 1325-1336 (2018), doi:10.1108/RPJ-10-2016-0161
Constraint regularization of a non-smooth damage model., Nunziante Valoroso, Claude Stolz, 10th European Solid Mechanics Conference ( ESMC2018 ) (2018)
Reduced order modeling for physically-based augmented reality, Alberto Badías, Icíar Alfaro, David González, Francisco Chinesta, Elías Cueto, Computer Methods in Applied Mechanics and Engineering, Vol. 341, issue 12, pp. 53-70 (2018), doi:10.1016/j.cma.2018.06.011
A semi-empirical model to characterize the error of air temperature measurement induced by the shelter used, Jérémy Bernard, Pascal Kéravec, Benjamin Morille, Marjorie Musy, Isabelle Calmet, Erwan Bocher, EMS Annual Meeting: European Conference for Applied Meteorology and Climatology, Vol. 15, pp. 2018 - 744 (2018)
Framework to combine technical, economic and environmental points of view of additive manufacturing processes, Mazyar Yosofi, Olivier Kerbrat, Pascal Mognol, Procedia CIRP, Vol. 69, pp. 118-123 (2018), doi:10.1016/j.procir.2017.11.085
Selection method for multiple performances evaluation during early design stages, Kévin Audoux, Frédéric Segonds, Olivier Kerbrat, Améziane Aoussat, Procedia CIRP, Vol. 70, issue 2, pp. 204-210 (2018), doi:10.1016/j.procir.2018.03.295
Computational measurements of stress fields from digital images, Julien Réthoré, Adrien Leygue, Michel Coret, Laurent Stainier, Erwan Verron, International Journal for Numerical Methods in Engineering, Vol. 113, issue 12, pp. 1810-1826 (2018), doi:10.1002/nme.5721
Validation of a multimodal set-up for the study of zirconium alloys claddings' behaviour under simulated LOCA conditions, Damien Campello, Nicolas Tardif, Jean Desquines, Marie-Christine Baietto, Michel Coret, Anne Maynadier, Philippe Chaudet, Strain, Vol. 54, number 363, issue 5 (2018), doi:10.1111/str.12279
Solidification of dredged sediments using hydraulic and geopolymer binders, Ishak Moghrabi, Harifidy Ranaivomanana, Fateh Bendahmane, Ouali Amiri, Academic Journal of Civil Engineering, Vol. 36 (2018)
Etude expérimentale du comportement chimio-mécanique des sédiments traités aux liants géopolymères, Ishak Moghrabi, Harifidy Ranaivomanana, Fateh Bendahmane, Ouali Amiri, Colloque EcoMat 2018 (2018)
Application of magnetic pulse forming to aeronautic small pieces, Cheikh-Tidiane Sow, Grégoire Bazin, D. Daniel, Emmanuel Bon, Didier Priem, Guillaume Racineux, 21st International ESAFORM Conference on Material Forming: ESAFORM 2018, pp. 100016, Author(s) (2018), doi:10.1063/1.5034956
Sand - rubber mixtures undergoing isotropic loading: derivation and experimental probing of a physical model, Auriane Platzer, Salman Rouhanifar, Patrick Richard, Bogdan Cazacliu, Erdin Ibraim, Granular Matter, Vol. 20, number 132, issue 4 (2018), doi:10.1007/s10035-018-0853-7
Accelerated estimation of fatigue performances of thermoplastic composite material by self-heating monitoring, Laura Muller, Jean-Michel Roche, Antoine Hurmane, Catherine Peyrac, Laurent Gornet, ECCM 18 (2018)
On the identification of the coefficient of moisture expansion of polyamide-6: Accounting differential swelling strains and plasticization, Hassan Obeid, Alexandre Clément, Sylvain Fréour, Frédéric Jacquemin, Pascal Casari, Mechanics of Materials, Vol. 118, issue 4, pp. 1-10 (2018), doi:10.1016/j.mechmat.2017.12.002
Multiphysics Modeling of the Hygro-Mechanical Behavior of Heterogeneous Materials, Alexandre Clément, Sylvain Fréour, Frédéric Jacquemin, Durability of Composites in a Marine Environment 2, Vol. 245, pp. 91-112, ISBN:978-3-319-65144-6, Springer International Publishing (2018), doi:10.1007/978-3-319-65145-3_6
In Situ Mechanical Behavior of Regenerating Rat Calvaria Bones Under Tensile Load via Synchrotron Diffraction Characterization, Ameni Zaouali, Baptiste Girault, David Gloaguen, Fabienne Jordana, Marie-José Moya, Pierre-Antoine Dubos, Valérie Geoffroy, Matthias Schwartzkopf, Tim Snow, Himadri Gupta, Olga Shebanova, Konrad Schneider, Baobao Chang, Residual Stresses 2018, pp. 117-122, Materials Research Forum LLC (2018), doi:10.21741/9781945291890-19
Influence of tensile cracking and of aggregate size on concrete permeability, Marta Choinska, Hayder Al-Khazraji, Nathan Benkemoun, Abdelhafid Khelidj, MATEC Web of Conferences, Vol. 163, number 02001, issue 3 (2018), doi:10.1051/matecconf/201816302001
Impact of residual stresses on mechanical behaviour of hot work steels, Jamal Fajoui, Mohamed Kchaou, Amira Sellami, Samuel Branchu, Riadh Elleuch, Frédéric Jacquemin, Engineering Failure Analysis, Vol. 94, issue 1, pp. 33-40 (2018), doi:10.1016/j.engfailanal.2018.07.020
Probabilistic analysis of a strip footing resting on a spatially varying soil using Kriging and enhanced active learning, Abdul Kader El Haj, Abdul-Hamid Soubra, Tamara Al-Bittar, IFIP 8 Reliability and Optimization of Structural Systems (2018)
Application of sensitivity analysis in the life cycle design for the durability of reinforced concrete structures in the case of XC4 exposure class, van Loc Ta, Tristan Senga Kiessé, Stéphanie Bonnet, Anne Ventura, Cement and Concrete Composites, Vol. 87, issue 1, pp. 53-62 (2018), doi:10.1016/j.cemconcomp.2017.11.024
Determining chloride content profiles in concrete using an electrical resistivity tomography device, Milia Fares, Géraldine Villain, Stéphanie Bonnet, Sergio Palma-Lopes, Benoit Thauvin, Mickaël Thiery, Cement and Concrete Composites, Vol. 94, issue 12, pp. 315-326 (2018), doi:10.1016/j.cemconcomp.2018.08.001
Mixture design and early age investigations of more sustainable UHPC, Omar Abdulkareem, Amor Ben Fraj, Marwen Bouasker, Abdelhafid Khelidj, Construction and Building Materials, Vol. 163, pp. 235-246 (2018), doi:10.1016/j.conbuildmat.2017.12.107
Moisture diffusion in composites tubes: Characterization and identification of microstructure-properties relationship, Georgina Ibrahim, Pascal Casari, Frédéric Jacquemin, Sylvain Fréour, Amandine Célino, Alexandre Clément, Khaled Khalil, Journal of Composite Materials, Vol. 52, issue 8, pp. 1073-1088 (2018), doi:10.1177/0021998317720010
Three-dimensional mechanical properties of dry carbon fiber tows subjected to cyclic compressive loading, Anne-Sophie Lectez, Khalid El Azzouzi, Christophe Binetruy, Sébastien Comas-Cardona, Erwan Verron, Jean-Michel Lebrun, Journal of Composite Materials, Vol. 52, issue 19, pp. 2661-2677 (2018), doi:10.1177/0021998317752229
Coupling damage and cohesive zone models with the Thick Level Set approach to fracture, Benoît Lé, Nicolas Moes, Grégory Legrain, Engineering Fracture Mechanics, Vol. 193, issue 4, pp. 214-247 (2018), doi:10.1016/j.engfracmech.2017.12.036